BAY-STACK-MIB
AI MIB Summary
The BAY-STACK-MIB module provides standard SNMP management interfaces for Nortel BayStack series switches and bridges, enabling the monitoring of interface status, traffic counters, error statistics, and system resource utilization. It facilitates the collection of operational data such as port throughput, packet drops, and device health metrics for network performance analysis and fault detection.
General BayStack MIB.
Main OID:
bayStackMib.bayStackMibs.13
13
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
13 total| Object Name |
|---|
bayStackMibGeneral BayStack MIB. MODULE-IDENTITY .bayStackMibs.13 |
bayStackObjects OBJECT IDENTIFIER .bayStackMibs.13.1 |
bayStackConfig OBJECT IDENTIFIER .bayStackMibs.13.1.1 |
bayStackConfigExpectedStackSizeThe expected stack size. A unit that expects to be
standalone would use a value of 1.rw Integer32 .bayStackMibs.13.1.1.1 |
bayStackConfigStackErrorNotificationIntervalThis objects controls the frequency with which
bsnStackConfigurationError notifications are generated.rw Integer32 .bayStackMibs.13.1.1.2 |
bayStackConfigStackErrorNotificationEnabledThis objects controls whether bsnStackConfigurationError
notifications are generated.rw TruthValue (SNMPv2-TC) .bayStackMibs.13.1.1.3 |
bayStackConfigStackRebootUnitOnFailureThis object controls whether to reboot any unit in a stack whose
stack ports do not go logically up.rw TruthValue (SNMPv2-TC) .bayStackMibs.13.1.1.4 |
bayStackConfigStackRetryCountStack retry count.rw Unsigned32 .bayStackMibs.13.1.1.5 |
bayStackUnitConfigTableThis table contains per-unit configuration data for a stack. SEQUENCE OF BayStackUnitConfigEntry .bayStackMibs.13.1.2 |
bayStackUnitConfigEntryAn entry of configuration data for a stacked unit. BayStackUnitConfigEntry .bayStackMibs.13.1.2.1 |
bayStackUnitConfigIndexThe unit number of an entry.ro Integer32 .bayStackMibs.13.1.2.1.1 |
bayStackUnitConfigRearPortAdminModeThe current administrative rear-port mode for this unit. This
value will be applied at the next stack re-boot if it is different
from the current operational value. Supported values are: standalone
(rear-port mode is enabled normal), stacking (rear-port mode is disabled)
and spb(rear-port mode is enabled with loopback port reserved).rw Enumeration .bayStackMibs.13.1.2.1.2 |
bayStackUnitConfigRearPortOperModeThe current operational rear-port mode for this unit. Supported values are:
standalone (operational rear-port mode is enabled normal), stacking (operational
rear-port mode is disabled) and spb(operational rear-port mode is enabled
with loopback port reserved).ro Enumeration .bayStackMibs.13.1.2.1.3 |