BAS-TG-MIB
The BAS-TG-MIB module provides configuration objects for BAS-Traffic Generation extensions on Broadband Access Systems, Inc. hardware, enabling the management of synthetic traffic generation parameters and test session states for network performance validation.
Imported Objects
Objects
17 total| Object Name |
|---|
basTrafGenMIBThe MIB module defines the configuration MIB objects for Broadband Access Systems, Inc. Traffic Generation extensions. MODULE-IDENTITY .1.3.6.1.4.1.3493.2.13.1 |
basTrafGenTableA list of traffic generation entries. The number of entries is given by the value of ifNumber. SEQUENCE OF BasTrafGenEntry .1.3.6.1.4.1.3493.2.13.1.1 |
basTrafGenEntryAn entry containing management information applicable to a particular traffic generation. BasTrafGenEntry .1.3.6.1.4.1.3493.2.13.1.1.1 |
basTrafGenIndexUsed to create an instance of GenTraff.ro INTEGER .1.3.6.1.4.1.3493.2.13.1.1.1.1 |
basTrafGenTransportTransport to use.rw Enumeration .1.3.6.1.4.1.3493.2.13.1.1.1.2 |
basTrafGenPortPort to use.rw INTEGER .1.3.6.1.4.1.3493.2.13.1.1.1.3 |
basTrafGenStartStop and start traffic.rw Enumeration .1.3.6.1.4.1.3493.2.13.1.1.1.4 |
basTrafGenRateRate of sending max means no delay between transmissions. 1sec means send one packet per second.rw Enumeration .1.3.6.1.4.1.3493.2.13.1.1.1.5 |
basTrafGenDestDestination IP address.rw IpAddress .1.3.6.1.4.1.3493.2.13.1.1.1.6 |
basTrafGenSrcDestination IP address.rw IpAddress .1.3.6.1.4.1.3493.2.13.1.1.1.7 |
basTrafGenInReceived packets.ro Counter32 .1.3.6.1.4.1.3493.2.13.1.1.1.8 |
basTrafGenOutSent packets.ro Counter32 .1.3.6.1.4.1.3493.2.13.1.1.1.9 |
basTrafGenSeqErrorSequence error count.ro Counter32 .1.3.6.1.4.1.3493.2.13.1.1.1.10 |
basTrafGenSizePacket size.rw INTEGER .1.3.6.1.4.1.3493.2.13.1.1.1.11 |
basTrafGenPattern32 bit pattern to send.rw INTEGER .1.3.6.1.4.1.3493.2.13.1.1.1.12 |
basTrafGenResetStatus.rw INTEGER .1.3.6.1.4.1.3493.2.13.1.1.1.13 |
basTrafGenStatusStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.13.1.1.1.14 |
More MIBs from Broadband Access
Browse all Broadband AccessMIBs →The BAS-CMTS-CONFIG-MIB provides SNMP-manageable configuration parameters for Cable Modem Termination Systems (CMTS) within DOCSIS-based broadband access networks, enabling the remote administration of interface settings, channel profiles, and MAC-layer operational states. This module facilitates the centralized provisioning and modification of CMTS subsystems to ensure consistent service delivery and network topology alignment across the cable infrastructure.
The BAS-OSPF-MIB module provides management objects for monitoring and configuring Open Shortest Path First (OSPF) routing instances within the IP forwarding subsystem of Broadband Access Systems. It enables the tracking of OSPF neighbor adjacencies, interface states, and routing table metrics to ensure reliable Layer 3 connectivity across broadband aggregation networks.
The AATS-MIB provides SNMP management capabilities for the BATS (Business Application Traffic System) software suite, enabling monitoring of application session states, traffic throughput, and protocol-specific performance counters. This module facilitates the collection of operational metrics required for troubleshooting BATS service availability and analyzing data flow patterns within the managed network environment.
The BAS-ALIAS-CABLE-DEVICE-MIB provides standard OID definitions for mapping and managing alias attributes of Cable Modem Termination System (CMTS) and Docsis Cable Device interfaces within a Broadband Access System cluster. It enables network management systems to correlate logical device identifiers with physical hardware components for precise fault isolation and configuration tracking in DOCSIS-based cable networks.
The BAS-PBRF-RIP-MIB module enables management of Broadband Access Systems, Inc. routers to configure and monitor Route Information Protocol (RIP) export policies and associated route filtering rules. It provides access to configuration parameters governing how routing updates are selectively advertised to neighboring RIP peers based on defined filter criteria.
The BAS-PBRF-OSPF-MIB module manages OSPF-based policy-based routing (PBR) filters on Broadband Access Systems, Inc. hardware, enabling the configuration and monitoring of route selection policies that override standard OSPF forwarding decisions.