BAS-ALIAS-CABLE-DEVICE-MIB
AI MIB Summary
The BAS-ALIAS-CABLE-DEVICE-MIB provides standard OID definitions for mapping and managing alias attributes of Cable Modem Termination System (CMTS) and Docsis Cable Device interfaces within a Broadband Access System cluster. It enables network management systems to correlate logical device identifiers with physical hardware components for precise fault isolation and configuration tracking in DOCSIS-based cable networks.
This MIB module defines the Alias DocsCd MIB objects for a Broadband Access System Cluster.
Main OID:
basAliasDocsCdMib.1.3.6.1.4.1.3493.2.7.9.1
133
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
133 total| Object Name |
|---|
basAliasDocsCdMibThis MIB module defines the Alias DocsCd MIB objects for a Broadband Access System Cluster. MODULE-IDENTITY .1.3.6.1.4.1.3493.2.7.9.1 |
basDocsDevMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.9.1.1 |
basDocsDevBase OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.9.1.1.1 |
basDocsDevBaseTable SEQUENCE OF BasDocsDevBaseEntry .1.3.6.1.4.1.3493.2.7.9.1.1.1.1 |
basDocsDevBaseEntry BasDocsDevBaseEntry .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1 |
basDocsDevRoleDefines the current role of this device.ro Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.1 |
basDocsDevDateTimeThe date and time, with optional timezone information.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.2 |
basDocsDevResetNowSetting this object to true(1) causes the device to reset. Reading this object always returns false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.3 |
basDocsDevSerialNumberThe manufacturer's serial number for this device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.4 |
basDocsDevSTPControlThis object controls operation of the spanning tree protocol (as distinguished from transparent bridging). If set to stEnabled(1) then the spanning tree protocol is enabled, subject to bridging constraints. If noStFilterBpdu(2), then spanning tree is not active, and Bridge PDUs received are discarded. If noStPassBpdu(3) then spanning tree is not active and Bridge PDUs are transparently forwarded. Note that a device need not implement all of these options, but that noStFilterBpdu(2) is required.rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.5 |
basDocsDevChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.6 |
basDocsDevSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.7 |
basDocsDevIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.8 |
basDocsDevLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.1.1.1.9 |
basDocsDevNmAccessTableThis table controls access to SNMP objects by network management stations. If the table is empty, access to SNMP objects is unrestricted. SEQUENCE OF BasDocsDevNmAccessEntry .1.3.6.1.4.1.3493.2.7.9.1.1.2 |
basDocsDevNmAccessEntryControls access to SNMP objects by a particular network management station. For each entry in this table, the contents are not readable unless the management station has read-write permission. BasDocsDevNmAccessEntry .1.3.6.1.4.1.3493.2.7.9.1.1.2.1 |
basDocsDevNmAccessIndexIndex used to order the application of access entries. INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.1 |
basDocsDevNmAccessIpThe IP address (or subnet) of the network management station. The address 255.255.255.255 is defined to mean any NMS. If traps are enabled for this entry, then the value must be the address of a specific device.rw IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.2 |
basDocsDevNmAccessIpMaskThe IP subnet mask of the network management stations. If traps are enabled for this entry, then the value must be 255.255.255.255.rw IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.3 |
basDocsDevNmAccessCommunityThe community string to be matched for access by this entry. If set to the null string then any community string will match.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.4 |
basDocsDevNmAccessControlSpecifies the type of access allowed to this NMS. Setting this object to none(1) causes the table entry to be destroyed. Read(2) allows access by 'get' and 'get-next' PDUs. ReadWrite(3) allows access by 'set' as well. RoWithtraps(4), rwWithTraps(5), and trapsOnly(6) control distribution of Trap PDUs transmitted by this device.rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.5 |
basDocsDevNmAccessInterfacesSpecifies the set of interfaces from which requests from this NMS will be accepted. Each octet within the value of this object specifies a set of eight interfaces, with the first octet specifying ports 1 through 8, the second octet specifying interfaces 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered interface, and the least significant bit represents the highest numbered interface. Thus, each interface is represented by a single bit within the value of this object. If that bit has a value of '1' then that interface is included in the set. Note that entries in this table apply only to link-layer interfaces (e.g., Ethernet and CATV MAC). Upstream and downstream channel interfaces must not be specified.rw OCTET STRING .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.6 |
basDocsDevNmAccessStatusControls and reflects the status of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.7 |
basDocsDevNmAccessChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.8 |
basDocsDevNmAccessSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.9 |
basDocsDevNmAccessIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.10 |
basDocsDevNmAccessLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.2.1.11 |
basDocsDevSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.9.1.1.3 |
basDocsDevSwTable SEQUENCE OF BasDocsDevSwEntry .1.3.6.1.4.1.3493.2.7.9.1.1.3.1 |
basDocsDevSwEntry BasDocsDevSwEntry .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1 |
basDocsDevSwServerThe address of the TFTP server used for software upgrades.rw IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.1 |
basDocsDevSwFilenameThe file name of the software image to be loaded into this device. Unless set via SNMP, this is the file name specified by the provisioning server that corresponds to the software version that is desired for this device. If unknown, the string '(unknown)' is returned.rw DisplayString .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.2 |
basDocsDevSwAdminStatusIf set to upgradeFromMgt(1), the device will initiate a TFTP software image download using docsDevSwFilename. After successfully receiving an image, the device will set its state to ignoreProvisioningUpgrade(3) and reboot. If the download process is interrupted by a reset or power failure, the device will load the previous image and, after re-initialization, continue to attempt loading the image specified in docsDevSwFilename. If set to allowProvisioningUpgrade(2), the device will use the software version information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreProvisioningUpgrade(3), the device will disregard software image upgrade information from the provisioning server. Note that reading this object can return upgradeFromMgt(1). This indicates that a software download is currently in progress, and that the device will reboot after successfully receiving an image.rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.3 |
basDocsDevSwOperStatusInProgress(1) indicates that a TFTP download is underway, either as a result of a version mismatch at provisioning or as a result of a upgradeFromMgt request. CompleteFromProvisioning(2) indicates that the last software upgrade was a result of version mismatch at provisioning. CompleteFromMgt(3) indicates that the last software upgrade was a result of setting docsDevSwAdminStatus to upgradeFromMgt. Failed(4) indicates that the last attempted download failed, ordinarily due to TFTP timeout.ro Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.4 |
basDocsDevSwChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.5 |
basDocsDevSwSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.6 |
basDocsDevSwIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.7 |
basDocsDevSwLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.3.1.1.8 |
basDocsDevServer OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.9.1.1.4 |
basDocsDevServerTable SEQUENCE OF BasDocsDevServerEntry .1.3.6.1.4.1.3493.2.7.9.1.1.4.1 |
basDocsDevServerEntry BasDocsDevServerEntry .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1 |
basDocsDevServerBootStateIf operational(1), the device has completed loading and processing of configuration parameters and the CMTS has completed the Registration exchange. If disabled(2) then the device was administratively disabled, possibly by being refused network access in the configuration file. If waitingForDhcpOffer(3) then a DHCP Discover has been transmitted and no offer has yet been received. If waitingForDhcpResponse(4) then a DHCP Request has been transmitted and no response has yet been received. If waitingForTimeServer(5) then a Time Request has been transmitted and no response has yet been received. If waitingForTftp(6) then a request to the TFTP parameter server has been made and no response received. If refusedByCmts(7) then the Registration Request/Response exchange with the CMTS failed. If forwardingDenied(8) then the registration process completed, but the network access option in the received configuration file prohibits forwarding.ro Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.1 |
basDocsDevServerDhcpThe IP address of the DHCP server that assigned an IP address to this device. Returns 0.0.0.0 if DHCP was not used for IP address assignment.ro IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.2 |
basDocsDevServerTimeThe IP address of the Time server (RFC-868).ro IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.3 |
basDocsDevServerTftpThe IP address of the TFTP server responsible for downloading provisioning and configuration parameters to this device.ro IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.4 |
basDocsDevServerConfigFileThe name of the device configuration file read from the TFTP server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.5 |
basDocsDevServerChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.6 |
basDocsDevServerSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.7 |
basDocsDevServerIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.8 |
basDocsDevServerLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.4.1.1.9 |
basDocsDevEvent OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.9.1.1.5 |
basDocsDevEvTable SEQUENCE OF BasDocsDevEvEntry .1.3.6.1.4.1.3493.2.7.9.1.1.5.1 |
basDocsDevEvEntry BasDocsDevEvEntry .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1 |
basDocsDevEvControlSetting this object to resetLog(1) empties the event log. All data is deleted. Setting it to useDefaultReporting(2) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(2).rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.1 |
basDocsDevEvSyslogThe IP address of the Syslog server. If 0.0.0.0, syslog transmission is inhibited.rw IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.2 |
basDocsDevEvThrottleAdminStatusControls the transmission of traps and syslog messages with respect to the trap pacing threshold. unconstrained(1) causes traps and syslog messages to be transmitted without regard to the threshold settings. maintainBelowThreshold(2) causes trap transmission and syslog messages to be suppressed if the number of traps would otherwise exceed the threshold. stopAtThreshold(3) causes trap transmission to cease at the threshold, and not resume until directed to do so. inhibited(4) causes all trap transmission and syslog messages to be suppressed. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event. Writing to this object resets the thresholding state.rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.3 |
basDocsDevEvThrottleInhibitedIf true(1), trap and syslog transmission is currently inhibited due to thresholds and/or the current setting of docsDevEvThrottleAdminStatus.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.4 |
basDocsDevEvThrottleThresholdNumber of trap/syslog events per docsDevEvThrottleInterval to be transmitted before throttling. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event.rw Unsigned32 .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.5 |
basDocsDevEvThrottleIntervalThe interval over which the trap threshold applies.rw INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.6 |
basDocsDevEvChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.7 |
basDocsDevEvSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.8 |
basDocsDevEvIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.9 |
basDocsDevEvLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.1.1.10 |
basDocsDevEvControlTableAllows control of the reporting of event classes. SEQUENCE OF BasDocsDevEvControlEntry .1.3.6.1.4.1.3493.2.7.9.1.1.5.7 |
basDocsDevEvControlEntryAllows configuration of the reporting mechanisms for a particular event priority. BasDocsDevEvControlEntry .1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1 |
basDocsDevEvPriorityThe priority level that is controlled by this entry. Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.1 |
basDocsDevEvReportingDefines the action to be taken on occurrence of this event class. Implementations may not necessarily support all options for all event classes, but at minimum must allow traps and syslogging to be disabled.rw Bits .1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.2 |
basDocsDevEvControlChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.3 |
basDocsDevEvControlSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.4 |
basDocsDevEvControlIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.5 |
basDocsDevEvControlLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.7.1.6 |
basDocsDevEventTableContains a log of network and device events that may be of interest in fault isolation and troubleshooting. SEQUENCE OF BasDocsDevEventEntry .1.3.6.1.4.1.3493.2.7.9.1.1.5.8 |
basDocsDevEventEntryDescribes a network or device event that may be of interest in fault isolation and troubleshooting. BasDocsDevEventEntry .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1 |
basDocsDevEvIndexProvides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via docsDevEvControl, (b) the device reboots and does not implement nonvolatile storage for this log, or (c) it reaches the value 2^31. The next entry for all the above cases is 1. INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.1 |
basDocsDevEvFirstTimeThe time that this entry was created.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.2 |
basDocsDevEvLastTimeIf multiple events are reported via the same entry, the time that the last event for this entry occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.3 |
basDocsDevEvCountThe number of consecutive event instances reported by this entry.ro Counter32 .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.4 |
basDocsDevEvLevelThe priority level of this event.ro Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.5 |
basDocsDevEvIdFor this product, uniquely identifies the type of event that is reported by this entry.ro Unsigned32 .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.6 |
basDocsDevEvTextProvides a human-readable description of the event, including all relevant context (interface numbers, etc.).ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.7 |
basDocsDevEvEventChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.8 |
basDocsDevEvEventSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.9 |
basDocsDevEvEventIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.10 |
basDocsDevEvEventLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.5.8.1.11 |
basDocsDevFilter OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.9.1.1.6 |
basDocsDevFilterTableContains a log of network and device events that may be of interest in fault isolation and troubleshooting. SEQUENCE OF BasDocsDevFilterEntry .1.3.6.1.4.1.3493.2.7.9.1.1.6.1 |
basDocsDevFilterEntryDescribes a network or device event that may be of interest in fault isolation and troubleshooting. BasDocsDevFilterEntry .1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1 |
basDocsDevFilterLLCDefaultIf set to discard(1), all packets not matching an LLC filter will be discarded. If set to accept(2), all packets not matching an LLC filter will be accepted for further processing (e.g., bridging).rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.1 |
basDocsDevFilterChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.2 |
basDocsDevFilterSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.3 |
basDocsDevFilterIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.4 |
basDocsDevFilterLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.1.1.5 |
basDocsDevFilterLLCTableA list of filters to apply to (bridged) LLC traffic, which forwards or drops packets on the basis of the layer three protocol type. SEQUENCE OF BasDocsDevFilterLLCEntry .1.3.6.1.4.1.3493.2.7.9.1.1.6.2 |
basDocsDevFilterLLCEntryDescribes a single filter to apply to (bridged) LLC traffic received on a specified interface. BasDocsDevFilterLLCEntry .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1 |
basDocsDevFilterLLCIndexIndex used for the identification of filters (note that LLC filter order is irrelevant). INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.1 |
basDocsDevFilterLLCStatusControls and reflects the status of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.2 |
basDocsDevFilterLLCIfIndexThe entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another network interface. If the value is zero, the filter applies to all interfaces. In Cable Modems, the default value is the customer side interface. In Cable Modem Termination Systems, this object has to be specified to create a row in this table.rw InterfaceIndexOrZero .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.3 |
basDocsDevFilterLLCProtocolTypeThe format of the value in docsDevFilterLLCProtocol: either a two-byte Ethernet Ethertype, or a one-byte 802.2 SAP value. EtherType(1) also applies to SNAP- encapsulated frames.rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.4 |
basDocsDevFilterLLCProtocolThe layer three protocol for which this filter applies. The protocol value format depends on docsDevFilterLLCProtocolType. Note that for SNAP frames, etherType filtering is performed rather than DSAP=0xAA.rw INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.5 |
basDocsDevFilterLLCMatchesCounts the number of times this filter was matched.ro Counter32 .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.6 |
basDocsDevFilterLLCChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.7 |
basDocsDevFilterLLCSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.8 |
basDocsDevFilterLLCIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.9 |
basDocsDevFilterLLCLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.2.1.10 |
basDocsDevFilterIpDefTableContains a log of network and device events that may be of interest in fault isolation and troubleshooting. SEQUENCE OF BasDocsDevFilterIpDefEntry .1.3.6.1.4.1.3493.2.7.9.1.1.6.3 |
basDocsDevFilterIpDefEntryDescribes a network or device event that may be of interest in fault isolation and troubleshooting. BasDocsDevFilterIpDefEntry .1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1 |
basDocsDevFilterIpDefaultIf set to discard(1), all packets not matching an IP filter will be discarded. If set to accept(2), all packets not matching an IP filter will be accepted for further processing (e.g., bridging).rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.1 |
basDocsDevFilterIpDefChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.2 |
basDocsDevFilterIpDefSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.3 |
basDocsDevFilterIpDefIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.4 |
basDocsDevFilterIpDefLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.3.1.5 |
basDocsDevFilterIpTableAn ordered list of filters to apply to IP traffic. Filter application is ordered by the filter index, rather than by a best match algorithm. Packets which match no filters are discarded or forwarded according to the setting of docsDevFilterIpDefault. SEQUENCE OF BasDocsDevFilterIpEntry .1.3.6.1.4.1.3493.2.7.9.1.1.6.4 |
basDocsDevFilterIpEntryDescribes a filter to apply to IP traffic received on a specified interface. Both source and destination addresses must match for the filter to apply. BasDocsDevFilterIpEntry .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1 |
basDocsDevFilterIpIndexIndex used to order the application of filters. The filter with the lowest index is always applied first. INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.1 |
basDocsDevFilterIpStatusControls and reflects the status of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.2 |
basDocsDevFilterIpControlIf set to discard(1), all packets matching this filter will be discarded and scanning of the remainder of the filter list will be aborted. If set to accept(2), all packets matching this filter will be accepted for further processing (e.g., bridging) and scanning of the remainder of the filter list will be aborted.rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.3 |
basDocsDevFilterIpIfIndexThe entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another network interface. If the value is zero, the filter applies to all interfaces. Default value in Cable Modems is the customer-side interface. In Cable Modem Termination Systems, this object has to be specified to create a row in this table.rw InterfaceIndexOrZero .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.4 |
basDocsDevFilterIpDirectionDetermines whether the filter is applied to inbound(1) traffic, outbound(2) traffic, or traffic in both(3) directions.rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.5 |
basDocsDevFilterIpBroadcastIf set to true(1), the filter only applies to multicast and broadcast traffic. If set to false(2), the filter applies to all traffic.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.6 |
basDocsDevFilterIpSaddrThe source IP address, or portion thereof, that is to be matched for this filter.rw IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.7 |
basDocsDevFilterIpSmaskA bit mask that is to be applied to the source address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits must be leftmost and contiguous.rw IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.8 |
basDocsDevFilterIpDaddrThe destination IP address, or portion thereof, that is to be matched for this filterrw IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.9 |
basDocsDevFilterIpDmaskA bit mask that is to be applied to the destination address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits must be leftmost and contiguousrw IpAddress .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.10 |
basDocsDevFilterIpProtocolThe IP protocol value that is to be matched.rw Enumeration .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.11 |
basDocsDevFilterIpSourcePortLowIf docsDevFilterIpProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer source port range that is to be matched.rw INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.12 |
basDocsDevFilterIpSourcePortHighIf docsDevFilterIpProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer source port range that is to be matched.rw INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.13 |
basDocsDevFilterIpDestPortLowIf docsDevFilterIpProtocol is udp or tcp, this is the inclusive lower bound of the transport-layer destination port range that is to be matched.rw INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.14 |
basDocsDevFilterIpDestPortHighIf docsDevFilterIpProtocol is udp or tcp, this is the inclusive upper bound of the transport-layer destination port range that is to be matched.rw INTEGER .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.15 |
basDocsDevFilterIpMatchesCounts the number of times this filter was matched.ro Counter32 .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.16 |
basDocsDevFilterIpChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.17 |
basDocsDevFilterIpSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.18 |
basDocsDevFilterIpIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.19 |
basDocsDevFilterIpLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.9.1.1.6.4.1.20 |