BAS-OSPF-MIB
AI MIB Summary
The BAS-OSPF-MIB module provides management objects for monitoring and configuring Open Shortest Path First (OSPF) routing instances within the IP forwarding subsystem of Broadband Access Systems. It enables the tracking of OSPF neighbor adjacencies, interface states, and routing table metrics to ensure reliable Layer 3 connectivity across broadband aggregation networks.
This module defines the MIB objects for a Broadband Access System IP Forwarding component.
Main OID:
basOspf.1.3.6.1.4.1.3493.2.7.7.1
189
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
189 total| Object Name |
|---|
basOspfThis module defines the MIB objects for a Broadband Access System IP Forwarding component. MODULE-IDENTITY .1.3.6.1.4.1.3493.2.7.7.1 |
basOspfObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.7.1 |
basOspfGeneralGroupTableA list of Route Server forwarding table distribution mechanism statistics. SEQUENCE OF BasOspfGeneralGroupEntry .1.3.6.1.4.1.3493.2.7.7.1.1 |
basOspfGeneralGroupEntryObjects for the CIDR mib. BasOspfGeneralGroupEntry .1.3.6.1.4.1.3493.2.7.7.1.1.1 |
basOspfRouterIdA 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.rw RouterID .1.3.6.1.4.1.3493.2.7.7.1.1.1.1 |
basOspfAdminStatThe administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one inter- face; 'disabled' disables it on all inter- faces.rw Status .1.3.6.1.4.1.3493.2.7.7.1.1.1.2 |
basOspfVersionNumberThe current version number of the OSPF proto- col is 2.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.1.1.3 |
basOspfAreaBdrRtrStatusA flag to note whether this router is an area border router.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.1.1.4 |
basOspfASBdrRtrStatusA flag to note whether this router is config- ured as an Autonomous System border router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.1.1.5 |
basOspfExternLsaCountThe number of external (LS type 5) link-state advertisements in the link-state database.ro Gauge32 .1.3.6.1.4.1.3493.2.7.7.1.1.1.6 |
basOspfExternLsaCksumSumThe 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.1.1.7 |
basOspfTOSSupportThe router's support for type-of-service rout- ing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.1.1.8 |
basOspfOriginateNewLsasThe number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA.ro Counter32 .1.3.6.1.4.1.3493.2.7.7.1.1.1.9 |
basOspfRxNewLsasThe number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments.ro Counter32 .1.3.6.1.4.1.3493.2.7.7.1.1.1.10 |
basOspfExtLsdbLimitThe maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded).rw Integer32 (-1..'7FFFFFFF'h) .1.3.6.1.4.1.3493.2.7.7.1.1.1.11 |
basOspfMulticastExtensionsA Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled.rw Integer32 .1.3.6.1.4.1.3493.2.7.7.1.1.1.12 |
basOspfExitOverflowIntervalThe number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted.rw PositiveInteger .1.3.6.1.4.1.3493.2.7.7.1.1.1.13 |
basOspfDemandExtensionsThe router's support for demand routing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.1.1.14 |
basOspfGeneralGroupChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.1.1.15 |
basOspfGeneralGroupSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.1.1.16 |
basOspfGeneralGroupIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.1.1.17 |
basOspfGeneralGroupLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.1.1.18 |
basOspfAreaTableInformation describing the configured parame- ters and cumulative statistics of the router's attached areas. SEQUENCE OF BasOspfAreaEntry .1.3.6.1.4.1.3493.2.7.7.1.2 |
basOspfAreaEntryInformation describing the configured parame- ters and cumulative statistics of one of the router's attached areas. BasOspfAreaEntry .1.3.6.1.4.1.3493.2.7.7.1.2.1 |
basOspfAreaIdA 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone.ro AreaID .1.3.6.1.4.1.3493.2.7.7.1.2.1.1 |
basOspfAuthTypeThe authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis.rwobsolete Integer32 -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) .1.3.6.1.4.1.3493.2.7.7.1.2.1.2 |
basOspfImportAsExternThe area's support for importing AS external link- state advertisements.rw Enumeration .1.3.6.1.4.1.3493.2.7.7.1.2.1.3 |
basOspfSpfRunsThe number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm.ro Counter32 .1.3.6.1.4.1.3493.2.7.7.1.2.1.4 |
basOspfAreaBdrRtrCountThe total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.3493.2.7.7.1.2.1.5 |
basOspfAsBdrRtrCountThe total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.ro Gauge32 .1.3.6.1.4.1.3493.2.7.7.1.2.1.6 |
basOspfAreaLsaCountThe total number of link-state advertisements in this area's link-state database, excluding AS External LSA's.ro Gauge32 .1.3.6.1.4.1.3493.2.7.7.1.2.1.7 |
basOspfAreaLsaCksumSumThe 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.2.1.8 |
basOspfAreaSummaryThe variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.rw Enumeration .1.3.6.1.4.1.3493.2.7.7.1.2.1.9 |
basOspfAreaStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.2.1.10 |
basOspfAreaChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.2.1.11 |
basOspfAreaSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.2.1.12 |
basOspfAreaIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.2.1.13 |
basOspfAreaLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.2.1.14 |
basOspfStubAreaTableThe set of metrics that will be advertised by a default Area Border Router into a stub area. SEQUENCE OF BasOspfStubAreaEntry .1.3.6.1.4.1.3493.2.7.7.1.3 |
basOspfStubAreaEntryThe metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. BasOspfStubAreaEntry .1.3.6.1.4.1.3493.2.7.7.1.3.1 |
basOspfStubAreaIdThe 32 bit identifier for the Stub Area. On creation, this can be derived from the in- stance.ro AreaID .1.3.6.1.4.1.3493.2.7.7.1.3.1.1 |
basOspfStubTOSThe Type of Service associated with the metric. On creation, this can be derived from the instance.ro TOSType .1.3.6.1.4.1.3493.2.7.7.1.3.1.2 |
basOspfStubMetricThe metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the inter- faces to other areas.rw BigMetric .1.3.6.1.4.1.3493.2.7.7.1.3.1.3 |
basOspfStubStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.3.1.4 |
basOspfStubMetricTypeThis variable displays the type of metric ad- vertised as a default route.rw Enumeration .1.3.6.1.4.1.3493.2.7.7.1.3.1.5 |
basOspfStubAreaChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.3.1.6 |
basOspfStubAreaSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.3.1.7 |
basOspfStubAreaIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.3.1.8 |
basOspfStubAreaLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.3.1.9 |
basOspfLsdbTableThe OSPF Process's Link State Database. SEQUENCE OF BasOspfLsdbEntry .1.3.6.1.4.1.3493.2.7.7.1.4 |
basOspfLsdbEntryA single Link State Advertisement. BasOspfLsdbEntry .1.3.6.1.4.1.3493.2.7.7.1.4.1 |
basOspfLsdbAreaIdThe 32 bit identifier of the Area from which the LSA was received.ro AreaID .1.3.6.1.4.1.3493.2.7.7.1.4.1.1 |
basOspfLsdbTypeThe type of the link state advertisement. Each link state type has a separate advertise- ment format.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.4.1.2 |
basOspfLsdbLsidThe Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.4.1.3 |
basOspfLsdbRouterIdThe 32 bit number that uniquely identifies the originating router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3493.2.7.7.1.4.1.4 |
basOspfLsdbSequenceThe sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.4.1.5 |
basOspfLsdbAgeThis field is the age of the link state adver- tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.3493.2.7.7.1.4.1.6 |
basOspfLsdbChecksumThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.4.1.7 |
basOspfLsdbAdvertisementThe entire Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.3493.2.7.7.1.4.1.8 |
basOspfLsdbChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.4.1.9 |
basOspfLsdbSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.4.1.10 |
basOspfLsdbIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.4.1.11 |
basOspfLsdbLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.4.1.12 |
basOspfHostTableThe list of Hosts, and their metrics, that the router will advertise as host routes. SEQUENCE OF BasOspfHostEntry .1.3.6.1.4.1.3493.2.7.7.1.6 |
basOspfHostEntryA metric to be advertised, for a given type of service, when a given host is reachable. BasOspfHostEntry .1.3.6.1.4.1.3493.2.7.7.1.6.1 |
basOspfHostIpAddressThe IP Address of the Host.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.6.1.1 |
basOspfHostTOSThe Type of Service of the route being config- ured.ro TOSType .1.3.6.1.4.1.3493.2.7.7.1.6.1.2 |
basOspfHostMetricThe Metric to be advertised.rw Metric .1.3.6.1.4.1.3493.2.7.7.1.6.1.3 |
basOspfHostStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.6.1.4 |
basOspfHostAreaIDThe Area the Host Entry is to be found within. By default, the area that a subsuming OSPF in- terface is in, or 0.0.0.0ro AreaID .1.3.6.1.4.1.3493.2.7.7.1.6.1.5 |
basOspfHostChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.6.1.6 |
basOspfHostSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.6.1.7 |
basOspfHostIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.6.1.8 |
basOspfHostLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.6.1.9 |
basOspfIfTableThe OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. SEQUENCE OF BasOspfIfEntry .1.3.6.1.4.1.3493.2.7.7.1.7 |
basOspfIfEntryThe OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. BasOspfIfEntry .1.3.6.1.4.1.3493.2.7.7.1.7.1 |
basOspfIfIpAddressThe IP address of this OSPF interface.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.7.1.1 |
basOspfAddressLessIfFor the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.7.1.2 |
basOspfIfAreaIdA 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.rw AreaID .1.3.6.1.4.1.3493.2.7.7.1.7.1.3 |
basOspfIfTypeThe OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.rw Enumeration .1.3.6.1.4.1.3493.2.7.7.1.7.1.4 |
basOspfIfAdminStatThe OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.rw Status .1.3.6.1.4.1.3493.2.7.7.1.7.1.5 |
basOspfIfRtrPriorityThe priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.rw DesignatedRouterPriority .1.3.6.1.4.1.3493.2.7.7.1.7.1.6 |
basOspfIfTransitDelayThe estimated number of seconds it takes to transmit a link state update packet over this interface.rw UpToMaxAge .1.3.6.1.4.1.3493.2.7.7.1.7.1.7 |
basOspfIfRetransIntervalThe number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets.rw UpToMaxAge .1.3.6.1.4.1.3493.2.7.7.1.7.1.8 |
basOspfIfHelloIntervalThe length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network.rw HelloRange .1.3.6.1.4.1.3493.2.7.7.1.7.1.9 |
basOspfIfRtrDeadIntervalThe number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.rw PositiveInteger .1.3.6.1.4.1.3493.2.7.7.1.7.1.10 |
basOspfIfPollIntervalThe larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor.rw PositiveInteger .1.3.6.1.4.1.3493.2.7.7.1.7.1.11 |
basOspfIfStateThe OSPF Interface State.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.7.1.12 |
basOspfIfDesignatedRouterThe IP Address of the Designated Router.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.7.1.13 |
basOspfIfBackupDesignatedRouterThe IP Address of the Backup Designated Router.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.7.1.14 |
basOspfIfEventsThe number of times this OSPF interface has changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3493.2.7.7.1.7.1.15 |
basOspfIfAuthKeyThe Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Oc- tet String of length zero.rw OCTET STRING .1.3.6.1.4.1.3493.2.7.7.1.7.1.16 |
basOspfIfStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.7.1.17 |
basOspfIfMulticastForwardingThe way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding.rw Enumeration .1.3.6.1.4.1.3493.2.7.7.1.7.1.18 |
basOspfIfDemandIndicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.7.1.19 |
basOspfIfAuthTypeThe authentication type specified for an in- terface. Additional authentication types may be assigned locally.rw INTEGER .1.3.6.1.4.1.3493.2.7.7.1.7.1.20 |
basOspfIfChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.7.1.21 |
basOspfIfSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.7.1.22 |
basOspfIfIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.7.1.23 |
basOspfIfLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.7.1.24 |
basOspfIfMetricTableThe TOS metrics for a non-virtual interface identified by the interface index. SEQUENCE OF BasOspfIfMetricEntry .1.3.6.1.4.1.3493.2.7.7.1.8 |
basOspfIfMetricEntryA particular TOS metric for a non-virtual in- terface identified by the interface index. BasOspfIfMetricEntry .1.3.6.1.4.1.3493.2.7.7.1.8.1 |
basOspfIfMetricIpAddressThe IP address of this OSPF interface. On row creation, this can be derived from the in- stance.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.8.1.1 |
basOspfIfMetricAddressLessIfFor the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for in- terfaces having no IP Address. On row crea- tion, this can be derived from the instance.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.8.1.2 |
basOspfIfMetricTOSThe type of service metric being referenced. On row creation, this can be derived from the instance.ro TOSType .1.3.6.1.4.1.3493.2.7.7.1.8.1.3 |
basOspfIfMetricValueThe metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed.rw Metric .1.3.6.1.4.1.3493.2.7.7.1.8.1.4 |
basOspfIfMetricStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.8.1.5 |
basOspfIfMetricChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.8.1.6 |
basOspfIfMetricSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.8.1.7 |
basOspfIfMetricIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.8.1.8 |
basOspfIfMetricLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.8.1.9 |
basOspfVirtIfTableInformation about this router's virtual inter- faces. SEQUENCE OF BasOspfVirtIfEntry .1.3.6.1.4.1.3493.2.7.7.1.9 |
basOspfVirtIfEntryInformation about a single Virtual Interface. BasOspfVirtIfEntry .1.3.6.1.4.1.3493.2.7.7.1.9.1 |
basOspfVirtIfAreaIdThe Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0ro AreaID .1.3.6.1.4.1.3493.2.7.7.1.9.1.1 |
basOspfVirtIfNeighborThe Router ID of the Virtual Neighbor.ro RouterID .1.3.6.1.4.1.3493.2.7.7.1.9.1.2 |
basOspfVirtIfTransitDelayThe estimated number of seconds it takes to transmit a link- state update packet over this interface.rw UpToMaxAge .1.3.6.1.4.1.3493.2.7.7.1.9.1.3 |
basOspfVirtIfRetransIntervalThe number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time.rw UpToMaxAge .1.3.6.1.4.1.3493.2.7.7.1.9.1.4 |
basOspfVirtIfHelloIntervalThe length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor.rw HelloRange .1.3.6.1.4.1.3493.2.7.7.1.9.1.5 |
basOspfVirtIfRtrDeadIntervalThe number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor.rw PositiveInteger .1.3.6.1.4.1.3493.2.7.7.1.9.1.6 |
basOspfVirtIfStateOSPF virtual interface states.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.9.1.7 |
basOspfVirtIfEventsThe number of state changes or error events on this Virtual Linkro Counter32 .1.3.6.1.4.1.3493.2.7.7.1.9.1.8 |
basOspfVirtIfAuthKeyIf Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfVifAuthKey always returns a string of length zero.rw OCTET STRING .1.3.6.1.4.1.3493.2.7.7.1.9.1.9 |
basOspfVirtIfStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.9.1.10 |
basOspfVirtIfAuthTypeThe authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally.rw INTEGER .1.3.6.1.4.1.3493.2.7.7.1.9.1.11 |
basOspfVirtIfChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.9.1.12 |
basOspfVirtIfSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.9.1.13 |
basOspfVirtIfIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.9.1.14 |
basOspfVirtIfLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.9.1.15 |
basOspfNbrTableA table of non-virtual neighbor information. SEQUENCE OF BasOspfNbrEntry .1.3.6.1.4.1.3493.2.7.7.1.10 |
basOspfNbrEntryThe information regarding a single neighbor. BasOspfNbrEntry .1.3.6.1.4.1.3493.2.7.7.1.10.1 |
basOspfNbrIpAddrThe IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.10.1.1 |
basOspfNbrAddressLessIndexOn an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this can be derived from the instance.ro InterfaceIndex .1.3.6.1.4.1.3493.2.7.7.1.10.1.2 |
basOspfNbrRtrIdA 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3493.2.7.7.1.10.1.3 |
basOspfNbrOptionsA Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.10.1.4 |
basOspfNbrPriorityThe priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network.rw DesignatedRouterPriority .1.3.6.1.4.1.3493.2.7.7.1.10.1.5 |
basOspfNbrStateThe State of the relationship with this Neigh- bor.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.10.1.6 |
basOspfNbrEventsThe number of times this neighbor relationship has changed state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3493.2.7.7.1.10.1.7 |
basOspfNbrLsRetransQLenThe current length of the retransmission queue.ro Gauge32 .1.3.6.1.4.1.3493.2.7.7.1.10.1.8 |
basOspfNbmaNbrStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.10.1.9 |
basOspfNbmaNbrPermanenceThis variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.10.1.10 |
basOspfNbrHelloSuppressedIndicates whether Hellos are being suppressed to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.10.1.11 |
basOspfNbrChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.10.1.12 |
basOspfNbrSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.10.1.13 |
basOspfNbrIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.10.1.14 |
basOspfNbrLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.10.1.15 |
basOspfVirtNbrTableA table of virtual neighbor information. SEQUENCE OF BasOspfVirtNbrEntry .1.3.6.1.4.1.3493.2.7.7.1.11 |
basOspfVirtNbrEntryVirtual neighbor information. BasOspfVirtNbrEntry .1.3.6.1.4.1.3493.2.7.7.1.11.1 |
basOspfVirtNbrAreaThe Transit Area Identifier.ro AreaID .1.3.6.1.4.1.3493.2.7.7.1.11.1.1 |
basOspfVirtNbrRtrIdA 32-bit integer uniquely identifying the neighboring router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3493.2.7.7.1.11.1.2 |
basOspfVirtNbrIpAddrThe IP address this Virtual Neighbor is us- ing.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.11.1.3 |
basOspfVirtNbrOptionsA Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.11.1.4 |
basOspfVirtNbrStateThe state of the Virtual Neighbor Relation- ship.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.11.1.5 |
basOspfVirtNbrEventsThe number of times this virtual link has changed its state, or an error has occurred.ro Counter32 .1.3.6.1.4.1.3493.2.7.7.1.11.1.6 |
basOspfVirtNbrLsRetransQLenThe current length of the retransmission queue.ro Gauge32 .1.3.6.1.4.1.3493.2.7.7.1.11.1.7 |
basOspfVirtNbrHelloSuppressedIndicates whether Hellos are being suppressed to the neighborro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.11.1.8 |
basOspfVirtNbrChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.11.1.9 |
basOspfVirtNbrSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.11.1.10 |
basOspfVirtNbrIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.11.1.11 |
basOspfVirtNbrLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.11.1.12 |
basOspfExtLsdbTableThe OSPF Process's Links State Database. SEQUENCE OF BasOspfExtLsdbEntry .1.3.6.1.4.1.3493.2.7.7.1.12 |
basOspfExtLsdbEntryA single Link State Advertisement. BasOspfExtLsdbEntry .1.3.6.1.4.1.3493.2.7.7.1.12.1 |
basOspfExtLsdbTypeThe type of the link state advertisement. Each link state type has a separate advertise- ment format.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.12.1.1 |
basOspfExtLsdbLsidThe Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.12.1.2 |
basOspfExtLsdbRouterIdThe 32 bit number that uniquely identifies the originating router in the Autonomous System.ro RouterID .1.3.6.1.4.1.3493.2.7.7.1.12.1.3 |
basOspfExtLsdbSequenceThe sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.12.1.4 |
basOspfExtLsdbAgeThis field is the age of the link state adver- tisement in seconds.ro Integer32 -- Should be 0..MaxAge .1.3.6.1.4.1.3493.2.7.7.1.12.1.5 |
basOspfExtLsdbChecksumThis field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.ro Integer32 .1.3.6.1.4.1.3493.2.7.7.1.12.1.6 |
basOspfExtLsdbAdvertisementThe entire Link State Advertisement, including its header.ro OCTET STRING .1.3.6.1.4.1.3493.2.7.7.1.12.1.7 |
basOspfExtLsdbChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.12.1.8 |
basOspfExtLsdbSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.12.1.9 |
basOspfExtLsdbIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.12.1.10 |
basOspfExtLsdbLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.12.1.11 |
basOspfRouteGroup OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.7.1.13 |
basOspfIntraArea OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.7.1.13.1 |
basOspfInterArea OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.7.1.13.2 |
basOspfExternalType1 OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.7.1.13.3 |
basOspfExternalType2 OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.7.1.13.4 |
basOspfAreaAggregateTableA range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are configured such that one range sub- sumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one. SEQUENCE OF BasOspfAreaAggregateEntry .1.3.6.1.4.1.3493.2.7.7.1.14 |
basOspfAreaAggregateEntryA range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255. Note that if ranges are range configured such that one range subsumes another range (e.g., 10.0.0.0 mask 255.0.0.0 and 10.1.0.0 mask 255.255.0.0), the most specific match is the preferred one. BasOspfAreaAggregateEntry .1.3.6.1.4.1.3493.2.7.7.1.14.1 |
basOspfAreaAggregateAreaIDThe Area the Address Aggregate is to be found within.ro AreaID .1.3.6.1.4.1.3493.2.7.7.1.14.1.1 |
basOspfAreaAggregateLsdbTypeThe type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to.ro Enumeration .1.3.6.1.4.1.3493.2.7.7.1.14.1.2 |
basOspfAreaAggregateNetThe IP Address of the Net or Subnet indicated by the range.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.14.1.3 |
basOspfAreaAggregateMaskThe Subnet Mask that pertains to the Net or Subnet.ro IpAddress .1.3.6.1.4.1.3493.2.7.7.1.14.1.4 |
basOspfAreaAggregateStatusThis variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.7.1.14.1.5 |
basOspfAreaAggregateEffectSubnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.rw Enumeration .1.3.6.1.4.1.3493.2.7.7.1.14.1.6 |
basOspfAreaAggregateChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.14.1.7 |
basOspfAreaAggregateSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.14.1.8 |
basOspfAreaAggregateIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.14.1.9 |
basOspfAreaAggregateLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.7.1.14.1.10 |