BAS-IP-MIB
The BAS-IP-MIB module extends standard IP MIB objects to enable granular monitoring of broadband access system interfaces, IP routing tables, and session statistics for vendor-specific broadband remote access servers (BRAS) and DSLAMs. It facilitates the tracking of critical access network performance metrics, including active user sessions, interface utilization, and IP address allocation states within the broadband aggregation layer.
Imported Objects
Objects
16 total| Object Name |
|---|
basIpMibThis module defines extensions to the IP MIB objects for Broadband Access Systems. MODULE-IDENTITY .1.3.6.1.4.1.3493.2.3.1 |
basIp OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.3.1.1 |
basIpAddrTableThe table of addressing information relevant to this entity's IP addresses. SEQUENCE OF BasIpAddrEntry .1.3.6.1.4.1.3493.2.3.1.1.1 |
basIpAddrEntryThe addressing information for one of this entity's IP addresses. BasIpAddrEntry .1.3.6.1.4.1.3493.2.3.1.1.1.1 |
basIpAdEntChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.3.1.1.1.1.1 |
basIpAdEntSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.3.1.1.1.1.2 |
basIpAdEntIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.3.1.1.1.1.3 |
basIpAdEntLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.3.1.1.1.1.4 |
basIpAdEntAddrThe IP address to which this entry's addressing information pertains.rw IpAddress .1.3.6.1.4.1.3493.2.3.1.1.1.1.5 |
basIpAdEntIfIndexThe index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of RFC 1573's ifIndex.rw INTEGER .1.3.6.1.4.1.3493.2.3.1.1.1.1.6 |
basIpAdEntNetMaskThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.3493.2.3.1.1.1.1.7 |
basIpAdEntBcastAddrThe value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.rw INTEGER .1.3.6.1.4.1.3493.2.3.1.1.1.1.8 |
basIpAdEntReasmMaxSizeThe size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface.ro INTEGER .1.3.6.1.4.1.3493.2.3.1.1.1.1.9 |
basIpAdEntStatusThe row status object used to create and delete a conceptual row according to RowStatus conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.3.1.1.1.1.10 |
basIpAdEntCardTypeThe card type inserted in a particular slotro BasCardClass (BAS-MIB) .1.3.6.1.4.1.3493.2.3.1.1.1.1.11 |
basIpAdEntPriorityIP address priority, 1 = primary, 2 and above secondary. Cannot be set to 0.rw INTEGER .1.3.6.1.4.1.3493.2.3.1.1.1.1.12 |
More MIBs from Broadband Access
Browse all Broadband AccessMIBs →The BAS-CMTS-CONFIG-MIB provides SNMP-manageable configuration parameters for Cable Modem Termination Systems (CMTS) within DOCSIS-based broadband access networks, enabling the remote administration of interface settings, channel profiles, and MAC-layer operational states. This module facilitates the centralized provisioning and modification of CMTS subsystems to ensure consistent service delivery and network topology alignment across the cable infrastructure.
The BAS-OSPF-MIB module provides management objects for monitoring and configuring Open Shortest Path First (OSPF) routing instances within the IP forwarding subsystem of Broadband Access Systems. It enables the tracking of OSPF neighbor adjacencies, interface states, and routing table metrics to ensure reliable Layer 3 connectivity across broadband aggregation networks.
The AATS-MIB provides SNMP management capabilities for the BATS (Business Application Traffic System) software suite, enabling monitoring of application session states, traffic throughput, and protocol-specific performance counters. This module facilitates the collection of operational metrics required for troubleshooting BATS service availability and analyzing data flow patterns within the managed network environment.
The BAS-ALIAS-CABLE-DEVICE-MIB provides standard OID definitions for mapping and managing alias attributes of Cable Modem Termination System (CMTS) and Docsis Cable Device interfaces within a Broadband Access System cluster. It enables network management systems to correlate logical device identifiers with physical hardware components for precise fault isolation and configuration tracking in DOCSIS-based cable networks.
The BAS-PBRF-RIP-MIB module enables management of Broadband Access Systems, Inc. routers to configure and monitor Route Information Protocol (RIP) export policies and associated route filtering rules. It provides access to configuration parameters governing how routing updates are selectively advertised to neighboring RIP peers based on defined filter criteria.
The BAS-PBRF-OSPF-MIB module manages OSPF-based policy-based routing (PBR) filters on Broadband Access Systems, Inc. hardware, enabling the configuration and monitoring of route selection policies that override standard OSPF forwarding decisions.