BAS-IP-FORWARD-MIB
AI MIB Summary
The BAS-IP-FORWARD-MIB provides management objects for monitoring IP forwarding tables, routing protocol states, and packet forwarding statistics within BAS-IP broadband access systems. It enables the tracking of interface throughput, routing table entries, and forwarding errors to ensure the operational integrity of the IP routing component in the access network.
This module defines the MIB objects for a Broadband Access System IP Forwarding component.
Main OID:
basIpForward.1.3.6.1.4.1.3493.2.7.5.1
31
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
basIpForwardThis module defines the MIB objects for a Broadband Access System IP Forwarding component. MODULE-IDENTITY .1.3.6.1.4.1.3493.2.7.5.1 |
basCidrObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.5.2 |
basCidrTableA list of Route Server forwarding table distribution mechanism statistics. SEQUENCE OF BasCidrEntry .1.3.6.1.4.1.3493.2.7.5.2.1 |
basCidrEntryObjects for the CIDR mib. BasCidrEntry .1.3.6.1.4.1.3493.2.7.5.2.1.1 |
basIpCidrRouteNumberThe number of current ipCidrRouteTable entries that are not invalid.ro Gauge32 .1.3.6.1.4.1.3493.2.7.5.2.1.1.3 |
basCidrChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.5.2.1.1.4 |
basCidrSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.5.2.1.1.5 |
basCidrIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.5.2.1.1.6 |
basCidrLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.5.2.1.1.7 |
basIpCidrRouteTableThis entity's IP Routing table. SEQUENCE OF BasIpCidrRouteEntry .1.3.6.1.4.1.3493.2.7.5.2.4 |
basIpCidrRouteEntryA particular route to a particular destina- tion, under a particular policy. BasIpCidrRouteEntry .1.3.6.1.4.1.3493.2.7.5.2.4.1 |
basIpCidrRouteDestThe destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteMask object is not equal to x.ro IpAddress .1.3.6.1.4.1.3493.2.7.5.2.4.1.1 |
basIpCidrRouteMaskIndicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipCidrRouteMask by reference to the IP Ad- dress Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRoute- Dest.ro IpAddress .1.3.6.1.4.1.3493.2.7.5.2.4.1.2 |
basIpCidrRouteTosThe policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30ro Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.3 |
basIpCidrRouteNextHopOn remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0.ro IpAddress .1.3.6.1.4.1.3493.2.7.5.2.4.1.4 |
basIpCidrRouteIfIndexThe ifIndex value which identifies the local interface through which the next hop of this route should be reached.rw Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.5 |
basIpCidrRouteTypeThe type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes.rw Enumeration .1.3.6.1.4.1.3493.2.7.5.2.4.1.6 |
basIpCidrRouteProtoThe routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols.ro Enumeration .1.3.6.1.4.1.3493.2.7.5.2.4.1.7 |
basIpCidrRouteAgeThe number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.ro Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.8 |
basIpCidrRouteInfoA reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's ipCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.5.2.4.1.9 |
basIpCidrRouteNextHopASThe Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's ipCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero.rw Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.10 |
basIpCidrRouteMetric1The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.11 |
basIpCidrRouteMetric2An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.12 |
basIpCidrRouteMetric3An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.13 |
basIpCidrRouteMetric4An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.14 |
basIpCidrRouteMetric5An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. If this metric is not used, its value should be set to -1.rw Integer32 .1.3.6.1.4.1.3493.2.7.5.2.4.1.15 |
basIpCidrRouteStatusThe row status variable, used according to row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.5.2.4.1.16 |
basIpCidrRouteChassisThe BAS Chassis ID of the Route Server. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.5.2.4.1.17 |
basIpCidrRouteSlotThe BAS Slot ID of the Route Server. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.5.2.4.1.18 |
basIpCidrRouteIfThe BAS interface ID of the Route Server. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.5.2.4.1.19 |
basIpCidrRouteLPortThe BAS logical port ID of the Route Server. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.5.2.4.1.20 |