BAS-FTD-MIB
The BAS-FTD-MIB module enables SNMP-based configuration and status monitoring of Broadband Access System Fixed Terminal Device (FTD) components, specifically tracking session states, interface statistics, and device operational parameters for DSL or fiber access aggregation points.
Imported Objects
Objects
31 total| Object Name |
|---|
basFtdMibThis MIB module defines the configuration and status MIB objects for a Broadband Access System FTD objects. MODULE-IDENTITY .1.3.6.1.4.1.3493.2.5.1 |
basFtdObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.5.1.1 |
basFtdHeartBeatTimerTimer value in seconds for the FTD heartbeat.rw INTEGER ( 1..10 ) .1.3.6.1.4.1.3493.2.5.1.1.1 |
basFtdTableEligibilityCounterCount of the FTD heartbeat timeouts since receiving a table request, i.e. an eligibility cycle.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.2 |
basFtdTableEligibilityCounterThresholdCounter threshold (table eligibility counter) defining a time window used to accumulate table requests and stagger their distribution.rw INTEGER ( 1..100 ) .1.3.6.1.4.1.3493.2.5.1.1.3 |
basFtdIdleCounterCount of the FTD heartbeat timeouts in an idle state.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.4 |
basFtdIdleCounterThresholdCounter threshold (idle counter) defining a time window ( in heartbeat units ) used to stagger the transmission of revision packets.rw INTEGER ( 1..100 ) .1.3.6.1.4.1.3493.2.5.1.1.5 |
basFtdTableRequestCounterCount of FTD table requests during an eligibility cycle.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.6 |
basFtdPendingCallbackCounterCount of the FTD heartbeat timeouts accumulated while a callback is pending, i.e. a pending cycle.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.7 |
basFtdPendingCallbackThresholdCounter threshold (pending callback counter) defining a maximum time window to wait for a callback.rw INTEGER ( 1..100 ) .1.3.6.1.4.1.3493.2.5.1.1.8 |
basFtdBootStateFTD objects boot staterw Enumeration .1.3.6.1.4.1.3493.2.5.1.1.9 |
basFtdPurgeConfigurationConfiguration for when to purge the forwarding table: immediately or delayed (after a new table has been received).rw Enumeration .1.3.6.1.4.1.3493.2.5.1.1.10 |
basFtdUpdateRequestsCount of the total number of update requests.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.11 |
basFtdUpdatepacketsCount of the total number of update packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.12 |
basFtdTableRequestsCount of the total number of table requests.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.13 |
basFtdTablePacketsCount of the total number of table packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.14 |
basFtdAllocatedPacketsCount of the total number of allocated packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.15 |
basFtdSentPacketsCount of the total number of packets sent.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.16 |
basFtdFreedPacketsCount of the total number of packets freed.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.17 |
basFtdSpuriousUpdatePacketsCount of the total number of spurious update packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.18 |
basFtdSpuriousTablePacketsCount of the total number of spurious table packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.19 |
basFtdIgnoredUpdatePacketsCount of the total number of ignored update packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.20 |
basFtdIgnoredTablePacketsCount of the total number of ignored table packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.21 |
basFtdInstalledUpdatePacketsCount of the total number of installed update packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.22 |
basFtdInstalledTablePacketsCount of the total number of installed table packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.23 |
basFtdStoredTablePacketsCount of the total number of stored table packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.24 |
basFtdRevisionPacketsCount of the total number of sent(rs) or received (fwd) revision packets.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.25 |
basFtdFailureCodeLog of the most recent failure code.ro Enumeration .1.3.6.1.4.1.3493.2.5.1.1.26 |
basFtdRevisionFTD update revision (write only for testing).rw INTEGER .1.3.6.1.4.1.3493.2.5.1.1.27 |
basFtdPresentFsmStateCurrent FTD finite state maching state.ro INTEGER .1.3.6.1.4.1.3493.2.5.1.1.28 |
basFtdFsmRestartsCount of the total number of FTD object restarts since a cold boot.ro Counter32 .1.3.6.1.4.1.3493.2.5.1.1.29 |
More MIBs from Broadband Access
Browse all Broadband AccessMIBs →The BAS-CMTS-CONFIG-MIB provides SNMP-manageable configuration parameters for Cable Modem Termination Systems (CMTS) within DOCSIS-based broadband access networks, enabling the remote administration of interface settings, channel profiles, and MAC-layer operational states. This module facilitates the centralized provisioning and modification of CMTS subsystems to ensure consistent service delivery and network topology alignment across the cable infrastructure.
The BAS-OSPF-MIB module provides management objects for monitoring and configuring Open Shortest Path First (OSPF) routing instances within the IP forwarding subsystem of Broadband Access Systems. It enables the tracking of OSPF neighbor adjacencies, interface states, and routing table metrics to ensure reliable Layer 3 connectivity across broadband aggregation networks.
The AATS-MIB provides SNMP management capabilities for the BATS (Business Application Traffic System) software suite, enabling monitoring of application session states, traffic throughput, and protocol-specific performance counters. This module facilitates the collection of operational metrics required for troubleshooting BATS service availability and analyzing data flow patterns within the managed network environment.
The BAS-ALIAS-CABLE-DEVICE-MIB provides standard OID definitions for mapping and managing alias attributes of Cable Modem Termination System (CMTS) and Docsis Cable Device interfaces within a Broadband Access System cluster. It enables network management systems to correlate logical device identifiers with physical hardware components for precise fault isolation and configuration tracking in DOCSIS-based cable networks.
The BAS-PBRF-RIP-MIB module enables management of Broadband Access Systems, Inc. routers to configure and monitor Route Information Protocol (RIP) export policies and associated route filtering rules. It provides access to configuration parameters governing how routing updates are selectively advertised to neighboring RIP peers based on defined filter criteria.
The BAS-PBRF-OSPF-MIB module manages OSPF-based policy-based routing (PBR) filters on Broadband Access Systems, Inc. hardware, enabling the configuration and monitoring of route selection policies that override standard OSPF forwarding decisions.