BAS-ALIAS-DOCS-IF-MIB
AI MIB Summary
The BAS-ALIAS-DOCS-IF-MIB facilitates the monitoring and management of MCNS/DOCSIS-compliant Radio Frequency (RF) interfaces on Cable Modems and Cable Modem Termination Systems (CMTS) by exposing aliasing attributes for interface identification and configuration. This module enables network operators to correlate physical RF ports with logical service identifiers, ensuring accurate traffic mapping and fault isolation within hybrid fiber-coaxial (HFC) access networks.
This is the MIB Module for MCNS/DOCSIS compliant Radio Frequency (RF) interfaces in Cable Modems (CM) and Cable Modem Termination Systems (CMTS).
Main OID:
basAliasDocsIfMib.1.3.6.1.4.1.3493.2.7.8.1
54
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
basAliasDocsIfMibThis is the MIB Module for MCNS/DOCSIS compliant Radio Frequency (RF) interfaces in Cable Modems (CM) and Cable Modem Termination Systems (CMTS). MODULE-IDENTITY .1.3.6.1.4.1.3493.2.7.8.1 |
basDocsIfMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.8.1.1 |
basDocsIfBaseObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.8.1.1.1 |
basDocsIfQosProfileTableDescribes the attributes for each class of service. SEQUENCE OF BasDocsIfQosProfileEntry .1.3.6.1.4.1.3493.2.7.8.1.1.1.3 |
basDocsIfQosProfileEntryDescribes the attributes for a single class of service. If implemented as read-create in the Cable Modem Termination System, creation of entries in this table is controlled by the value of docsIfCmtsQosProfilePermissions. If implemented as read-only, entries are created based on information in REG-REQ MAC messages received from Cable Modems (Cable Modem Termination System implementation), or based on information extracted from the TFTP option file (Cable Modem implementation). In the Cable Modem Termination system, read-only entries are removed if no longer referenced by docsIfCmtsServiceTable. An entry in this table must not be removed while it is referenced by an entry in docsIfCmServiceTable (Cable Modem) or docsIfCmtsServiceTable (Cable Modem Termination System). An entry in this table should not be changeable while it is referenced by an entry in docsIfCmtsServiceTable. If this table is created automatically, there should only be a single entry for each Class of Service. Multiple entries with the same Class of Service parameters are not recommended. BasDocsIfQosProfileEntry .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1 |
basDocsIfQosProfIndexThe index value which uniquely identifies an entry in the docsIfQosProfileTable. Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.1 |
basDocsIfQosProfPriorityA relative priority assigned to this service when allocating bandwidth. Zero indicates lowest priority; and seven indicates highest priority. Interpretation of priority is device-specific. MUST NOT be changed while this row is active.rw Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.2 |
basDocsIfQosProfMaxUpBandwidthThe maximum upstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of upstream bandwidth. MUST NOT be changed while this row is active.rw Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.3 |
basDocsIfQosProfGuarUpBandwidthMinimum guaranteed upstream bandwidth, in bits per second, allowed for a service with this service class. MUST NOT be changed while this row is active.rw Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.4 |
basDocsIfQosProfMaxDownBandwidthThe maximum downstream bandwidth, in bits per second, allowed for a service with this service class. Zero if there is no restriction of downstream bandwidth. MUST NOT be changed while this row is active.rw Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.5 |
basDocsIfQosProfMaxTxBurstThe maximum number of mini-slots that may be requested for a single upstream transmission. A value of zero means there is no limit. MUST NOT be changed while this row is active.rw Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.6 |
basDocsIfQosProfBaselinePrivacyIndicates whether Baseline Privacy is enabled for this service class. MUST NOT be changed while this row is active.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.7 |
basDocsIfQosProfStatusThis is object is to used to create or delete rows in this table. This object MUST NOT be changed from active while the row is referenced by the any entry in either docsIfCmServiceTable (on the CM), or the docsIfCmtsServiceTable (on the CMTS).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.8 |
basDocsIfQosProfChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.9 |
basDocsIfQosProfSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.10 |
basDocsIfQosProfIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.11 |
basDocsIfQosProfLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.1.3.1.12 |
basDocsIfCmObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.8.1.1.2 |
basDocsIfCmtsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3493.2.7.8.1.1.3 |
basDocsIfCmtsCmStatusTableA set of objects in the CMTS, maintained for each Cable Modem connected to this CMTS. SEQUENCE OF BasDocsIfCmtsCmStatusEntry .1.3.6.1.4.1.3493.2.7.8.1.1.3.3 |
basDocsIfCmtsCmStatusEntryStatus information for a single Cable Modem. An entry in this table exists for each Cable Modem that is connected to the CMTS implementing this table. BasDocsIfCmtsCmStatusEntry .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1 |
basDocsIfCmtsCmStatusIndexIndex value to uniquely identify an entry in this table. For an individual Cable Modem, this index value should not change during CMTS uptime. Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.1 |
basDocsIfCmtsCmStatusMacAddressMAC address of this Cable Modem. If the Cable Modem has multiple MAC addresses, this is the MAC address associated with the Cable interface.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.2 |
basDocsIfCmtsCmStatusIpAddressIP address of this Cable Modem. If the Cable Modem has no IP address assigned, or the IP address is unknown, this object returns a value of 0.0.0.0. If the Cable Modem has multiple IP addresses, this object returns the IP address associated with the Cable interface.ro IpAddress .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.3 |
basDocsIfCmtsCmStatusDownChannelIfIndexIfIndex of the downstream channel this CM is connected to. If the downstream channel is unknown, this object returns a value of zero.ro InterfaceIndexOrZero .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.4 |
basDocsIfCmtsCmStatusUpChannelIfIndexIfIndex of the upstream channel this CM is connected to. If the upstream channel is unknown, this object returns a value of zero.rw InterfaceIndexOrZero .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.5 |
basDocsIfCmtsCmStatusRxPowerThe receive power as percieved for upstream data from this Cable Modem. If the receive power is unknown, this object returns a value of zero.ro TenthdBmV UNITS "dBmV" .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.6 |
basDocsIfCmtsCmStatusTimingOffsetA measure of the current round trip time for this CM. Used for timing of CM upstream transmissions to ensure synchronized arrivals at the CMTS. Units are in terms of (6.25 microseconds/64). Returns zero if the value is unknown.ro Unsigned32 .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.7 |
basDocsIfCmtsCmStatusEqualizationDataEqualization data for this CM. Returns an empty string if the value is unknown or if there is no equalization data available or defined.ro OCTET STRING .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.8 |
basDocsIfCmtsCmStatusValueCurrent Cable Modem connectivity state, as specified in the RF Interface Specification. Returned status information is the CM status as assumed by the CMTS, and indicates the following events: other(1) Any state other than below. ranging(2) The CMTS has received an Initial Ranging Request message from the CM, and the ranging process is not yet complete. rangingAborted(3) The CMTS has sent a Ranging Abort message to the CM. rangingComplete(4) The CMTS has sent a Ranging Complete message to the CM. ipComplete(5) The CMTS has received a DHCP reply message and forwarded it to the CM. registrationComplete(6) The CMTS has sent a Registration Response mesage to the CM. accessDenied(7) The CMTS has sent a Registration Aborted message to the CM. The CMTS only needs to report states it is able to detect.ro Enumeration .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.9 |
basDocsIfCmtsCmStatusUnerroredsCodewords received without error from this Cable Modem.ro Counter32 .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.10 |
basDocsIfCmtsCmStatusCorrectedsCodewords received with correctable errors from this Cable Modem.ro Counter32 .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.11 |
basDocsIfCmtsCmStatusUncorrectablesCodewords received with uncorrectable errors from this Cable Modem.ro Counter32 .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.12 |
basDocsIfCmtsCmStatusSignalNoiseSignal/Noise ratio as perceived for upstream data from this Cable Modem. If the Signal/Noise is unknown, this object returns a value of zero.ro TenthdB UNITS "dB" .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.13 |
basDocsIfCmtsCmStatusMicroreflectionsTotal microreflections including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to return an absolutely accurate value, but should give a rough indication of microreflections received on this interface. It is up to the implementor to provide information as accurate as possible.ro Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.14 |
basDocsIfCmtsCmStatusChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.15 |
basDocsIfCmtsCmStatusSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.16 |
basDocsIfCmtsCmStatusIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.17 |
basDocsIfCmtsCmStatusLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.3.1.18 |
basDocsIfCmtsQosProfileTableProvides modulation profile information for this CMTS. SEQUENCE OF BasDocsIfCmtsQosProfileEntry .1.3.6.1.4.1.3493.2.7.8.1.1.3.6 |
basDocsIfCmtsQosProfileEntry BasDocsIfCmtsQosProfileEntry .1.3.6.1.4.1.3493.2.7.8.1.1.3.6.1 |
basDocsIfCmtsQosProfilePermissionsThis object specifies permitted methods of creating entries in docsIfQosProfileTable. CreateByManagement(0) is set if entries can be created using SNMP. UpdateByManagement(1) is set if updating entries using SNMP is permitted. CreateByModems(2) is set if entries can be created based on information in REG-REQ MAC messages received from Cable Modems. Information in this object is only applicable if docsIfQosProfileTable is implemented as read-create. Otherwise, this object is implemented as read-only and returns CreateByModems(2). Either CreateByManagement(0) or CreateByModems(1) must be set when writing to this object.rw Bits .1.3.6.1.4.1.3493.2.7.8.1.1.3.6.1.6 |
basDocsIfCmtsQosProfileChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.6.1.7 |
basDocsIfCmtsQosProfileSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.6.1.8 |
basDocsIfCmtsQosProfileIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.6.1.9 |
basDocsIfCmtsQosProfileLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.6.1.10 |
basDocsIfCmtsMacToCmTableThis is a table to provide a quick access index into the docsIfCmtsCmStatusTable. There is exactly one row in this table for each row in the docsIfCmtsCmStatusTable. In general, the management station should use this table only to get a pointer into the docsIfCmtsCmStatusTable (which corresponds to the CM's RF interface MAC address), and should not iterate (e.g. GetNext through) this table. SEQUENCE OF BasDocsIfCmtsMacToCmEntry .1.3.6.1.4.1.3493.2.7.8.1.1.3.7 |
basDocsIfCmtsMacToCmEntryA row in the docsIfCmtsMacToCmTable. An entry in this table exists for each Cable Modem that is connected to the CMTS implementing this table. BasDocsIfCmtsMacToCmEntry .1.3.6.1.4.1.3493.2.7.8.1.1.3.7.1 |
basDocsIfCmtsCmMacThe RF side MAC address for the referenced CM. (E.g. the interface on the CM that has docsCableMacLayer(127) as its ifType. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.3493.2.7.8.1.1.3.7.1.1 |
basDocsIfCmtsCmPtrAn row index into docsIfCmtsCmStatusTable. When queried with the correct instance value (e.g. a CM's MAC address), returns the index in docsIfCmtsCmStatusTable which represents that CM.ro Integer32 .1.3.6.1.4.1.3493.2.7.8.1.1.3.7.1.2 |
basDocsIfCmtsCmChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.7.1.3 |
basDocsIfCmtsCmSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.7.1.4 |
basDocsIfCmtsCmIfThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.7.1.5 |
basDocsIfCmtsCmLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.7.8.1.1.3.7.1.6 |
More MIBs from Broadband Access
Browse all Broadband AccessMIBs →BAS-CMTS-CONFIG-MIB
The BAS-CMTS-CONFIG-MIB provides SNMP-manageable configuration parameters for Cable Modem Termination Systems (CMTS) within DOCSIS-based broadband access networks, enabling the remote administration of interface settings, channel profiles, and MAC-layer operational states. This module facilitates the centralized provisioning and modification of CMTS subsystems to ensure consistent service delivery and network topology alignment across the cable infrastructure.
202 objects→
BAS-OSPF-MIB
The BAS-OSPF-MIB module provides management objects for monitoring and configuring Open Shortest Path First (OSPF) routing instances within the IP forwarding subsystem of Broadband Access Systems. It enables the tracking of OSPF neighbor adjacencies, interface states, and routing table metrics to ensure reliable Layer 3 connectivity across broadband aggregation networks.
200 objects→
AATS-MIB
The AATS-MIB provides SNMP management capabilities for the BATS (Business Application Traffic System) software suite, enabling monitoring of application session states, traffic throughput, and protocol-specific performance counters. This module facilitates the collection of operational metrics required for troubleshooting BATS service availability and analyzing data flow patterns within the managed network environment.
187 objects→
BAS-ALIAS-CABLE-DEVICE-MIB
The BAS-ALIAS-CABLE-DEVICE-MIB provides standard OID definitions for mapping and managing alias attributes of Cable Modem Termination System (CMTS) and Docsis Cable Device interfaces within a Broadband Access System cluster. It enables network management systems to correlate logical device identifiers with physical hardware components for precise fault isolation and configuration tracking in DOCSIS-based cable networks.
134 objects→
BAS-PBRF-RIP-MIB
The BAS-PBRF-RIP-MIB module enables management of Broadband Access Systems, Inc. routers to configure and monitor Route Information Protocol (RIP) export policies and associated route filtering rules. It provides access to configuration parameters governing how routing updates are selectively advertised to neighboring RIP peers based on defined filter criteria.
82 objects→
BAS-PBRF-OSPF-MIB
The BAS-PBRF-OSPF-MIB module manages OSPF-based policy-based routing (PBR) filters on Broadband Access Systems, Inc. hardware, enabling the configuration and monitoring of route selection policies that override standard OSPF forwarding decisions.
79 objects→