BAS-ACCESS-MIB
The BAS-ACCESS-MIB module provides configuration objects for managing network access control policies and authentication parameters on Broadband Access Systems, Inc. broadband access equipment. It enables administrators to define and enforce user session restrictions, port security rules, and access control lists (ACLs) to regulate network entry points.
Imported Objects
Objects
12 total| Object Name |
|---|
basAccessMIBThis MIB module defines the configuration MIB objects for Broadband Access Systems, Inc. Network Management access control. MODULE-IDENTITY .1.3.6.1.4.1.3493.2.10.1 |
basAccessTable SEQUENCE OF BasAccessEntry .1.3.6.1.4.1.3493.2.10.1.1 |
basAccessEntry BasAccessEntry .1.3.6.1.4.1.3493.2.10.1.1.1 |
basAccessChassisThe BAS Chassis ID of this card. BasChassisId (BAS-MIB) .1.3.6.1.4.1.3493.2.10.1.1.1.1 |
basAccessSlotThe BAS Slot ID of this card. BasSlotId (BAS-MIB) .1.3.6.1.4.1.3493.2.10.1.1.1.2 |
basAccessInterfaceThe BAS interface ID of this card. BasInterfaceId (BAS-MIB) .1.3.6.1.4.1.3493.2.10.1.1.1.3 |
basAccessLPortThe BAS logical port ID of this card. BasLogicalPortId (BAS-MIB) .1.3.6.1.4.1.3493.2.10.1.1.1.4 |
basAccessIndex Integer32 .1.3.6.1.4.1.3493.2.10.1.1.1.5 |
basAccessCommNameAn assigned SNMP community name. The SNMP entity may have more than one community names with either read/write or read-only priviledge.rw OCTET STRING .1.3.6.1.4.1.3493.2.10.1.1.1.6 |
basAccessIpAddressThe Ip address of the management application that is authorized to communicate with the SNMP entity. An Ip address of 0.0.0.0 allows any management application with a valid community and/or profile to connect to the SNMP entity.rw IpAddress .1.3.6.1.4.1.3493.2.10.1.1.1.7 |
basAccessProfileThe Profile associated with the community name. Each request PDU will have a profile in addition to the community name. The profile is specified as: '1' read-only '2' read/writerw INTEGER .1.3.6.1.4.1.3493.2.10.1.1.1.8 |
basAccessStatusThis mib object allows row creation to take place in the profile table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.3493.2.10.1.1.1.9 |
More MIBs from Broadband Access
Browse all Broadband AccessMIBs →The BAS-CMTS-CONFIG-MIB provides SNMP-manageable configuration parameters for Cable Modem Termination Systems (CMTS) within DOCSIS-based broadband access networks, enabling the remote administration of interface settings, channel profiles, and MAC-layer operational states. This module facilitates the centralized provisioning and modification of CMTS subsystems to ensure consistent service delivery and network topology alignment across the cable infrastructure.
The BAS-OSPF-MIB module provides management objects for monitoring and configuring Open Shortest Path First (OSPF) routing instances within the IP forwarding subsystem of Broadband Access Systems. It enables the tracking of OSPF neighbor adjacencies, interface states, and routing table metrics to ensure reliable Layer 3 connectivity across broadband aggregation networks.
The AATS-MIB provides SNMP management capabilities for the BATS (Business Application Traffic System) software suite, enabling monitoring of application session states, traffic throughput, and protocol-specific performance counters. This module facilitates the collection of operational metrics required for troubleshooting BATS service availability and analyzing data flow patterns within the managed network environment.
The BAS-ALIAS-CABLE-DEVICE-MIB provides standard OID definitions for mapping and managing alias attributes of Cable Modem Termination System (CMTS) and Docsis Cable Device interfaces within a Broadband Access System cluster. It enables network management systems to correlate logical device identifiers with physical hardware components for precise fault isolation and configuration tracking in DOCSIS-based cable networks.
The BAS-PBRF-RIP-MIB module enables management of Broadband Access Systems, Inc. routers to configure and monitor Route Information Protocol (RIP) export policies and associated route filtering rules. It provides access to configuration parameters governing how routing updates are selectively advertised to neighboring RIP peers based on defined filter criteria.
The BAS-PBRF-OSPF-MIB module manages OSPF-based policy-based routing (PBR) filters on Broadband Access Systems, Inc. hardware, enabling the configuration and monitoring of route selection policies that override standard OSPF forwarding decisions.