AWCVX-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for AWCVX-MIB.
604
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
604 total| Object Name |
|---|
aironet OBJECT IDENTIFIER .1.3.6.1.4.1.522 |
awcTrapLogSNMP trap corresponding to an event with a Severity
Level requiring Notify Disposition while
awcEventAlertSNMP is true. TRAP-TYPE .1.3.6.1.4.1.522.0.4 |
awcVx OBJECT IDENTIFIER .1.3.6.1.4.1.522.3 |
RFC1155-SMI Unknown .1.3.6.1.4.1.522.3 |
awcSystem OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.1 |
vxWorksVersionThe version of the underlying VxWorks
operating system.ro DisplayString .1.3.6.1.4.1.522.3.1.1 |
creationDateThe date and time the Access Point system code
was initially compiled.ro DisplayString .1.3.6.1.4.1.522.3.1.2 |
awcVxVersionThe version of the Access Point system code.ro DisplayString .1.3.6.1.4.1.522.3.1.3 |
sysFlagsThe VxWorks sysFlags system-configuration
flags in use by the Access Point system. Not
used by system code with awcVxVersion from
10.00 to 11.06.rw Gauge .1.3.6.1.4.1.522.3.1.4 |
languageCodeThe language currently in use by the system.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.1.5 |
awcDevIDThe Aironet DDP protocol device ID of the
system when using the full capabilities
with which the system is licensed. Note
that a system may be configured to use
fewer capabilities that those for which
it is licensed. For example, a Bridge
may be configured for use as an Access Point.ro Gauge .1.3.6.1.4.1.522.3.1.6 |
awcDevIDtxtTextual representation of awcDevID.
Max. string length is 128 octets.ro DisplayString .1.3.6.1.4.1.522.3.1.7 |
enableHTTPIf true, the Access Point's HTTP server
can accept connections from other network
devices. If false, the Access Point's HTTP
server will only accept connections from the
Access Point's console or indirectly over
TELNET.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.8 |
enableTelnetIf true, the Access Point's TELNET server
can accept connections from other network
devices. If false, all TELNET connections
will be refused.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.9 |
enableSNMPIf true, the Access Point's SNMP agent can
accept connections from other network
devices. If false, all SNMP connections
will be refused. Note that this can only
be set to false by an SNMP management
station. If false, it can only be set to true
by non-SNMP means.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.10 |
enableDnsResolverIf true, the Access Point will attempt to
resolve IP address references through all
configured DNS servers and will attempt to
perform reverse-lookup via all configured
DNS servers when displaying IP addresses.
If false, the Access Point will interpret
and display only explicit numeric IP
addresses.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.11 |
enableSNTPIf true, the Access Point will attempt to
periodically update its wall-clock time via a
configured SNTP server. If false, the Access
Point wall-clock time must be manually
adjusted.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.13 |
enableWDBIf true, the Access Point will enable use of
the VxWorks WDB debugger upon its next reboot.
If false, no WDB debugging services will be
available after the next reboot. The value
of enableWDB is applicable only to special
diagnostic versions of the Access Point
system code.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.14 |
pingTxLenThe size in octets of ping packets transmitted
by the Access Point. Default 64.rw Gauge .1.3.6.1.4.1.522.3.1.15 |
awcFirstBootIf true, no user-specified configuration has
been saved by the Access Point since either
the system left Cisco manufacturing or since
the user performed a Reset All System Factory
Defaults operation. If false, a change in
configuration has been saved by the user.
Note that configurations specified solely via
boot protocols such as DHCP or BOOTP are not
considered user-specified for purposes of
changing awcFirstBoot.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.16 |
awcOemOUIThe IEEE Organizationally Unique Identifier of
the reseller for which this system is
branded.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.1.17 |
awcOemNameThe full name of the reseller for which this
system is branded.ro DisplayString .1.3.6.1.4.1.522.3.1.18 |
awcOemNameShortAn abbreviated name of the reseller for which
this system is branded.ro DisplayString .1.3.6.1.4.1.522.3.1.19 |
awcOemHomeURLThe URL of the corporate HTML home page of the
reseller for which this system is branded.ro DisplayString .1.3.6.1.4.1.522.3.1.20 |
enablePSPFIf true, Publicly-Secure Packet Forwarding
mode is enabled (i.e. clients can not
communicate with each other). If false,
normal packet forwarding is used.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.21 |
sysExceptionRebootIf true, all access violations or other
general faults in any task will result in a
reboot of the system. If false, such errors
will not result in a reboot, and thus
diagnostics can be performed on the system.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.24 |
bootblockVersionThe version of the Access Point boot block
(bootstrap loader) code.ro DisplayString .1.3.6.1.4.1.522.3.1.25 |
motherboardRevisionRevision number of the Access Point
system motherboard.ro Gauge .1.3.6.1.4.1.522.3.1.26 |
enableSTPIf true and the system is licensed with Bridge
capabilities, the IEEE 802.1D Spanning Tree
Protocol will be be used to control packet
forwarding on all network interfaces. If
false or the system is not licensed with
Bridge capabilities, the system will use
Access Point heuristics to control packet
forwarding on all network interfaces.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.27 |
enableRebootKeyIf true, the VxWorks Monitor Trap keystroke
is enabled from the console and from Telnet.
By default, this is <control-X>. Entering
this character initiates a warm-restart of
the system. If false, the VxWorks Monitor
Trap keystroke is disabled.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.28 |
awcLocateUnitIf true, the unit will immediately begin
flashing all three of its Status LEDs with
an alternating pattern of amber and off.
If false, the Status LEDs operate in their
normal fashion.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.1.29 |
bootconfigVx OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.2 |
bootconfigBootProtocolThe protocol to be used for automatic
configuration at the time of system
bootstrap/reboot. Options BOOTP, DHCP,
or none.rw Enumeration .1.3.6.1.4.1.522.3.2.1 |
bootconfigReadINIIf always, the system will attempt to read a
.ini-formatted configuration file upon every
reboot. If never, the system will not attempt
to read a .ini file upon reboot, even if a
boot protocol is in use and the boot server
specifies a file to be read. If ifSpecified,
the system will attempt to read a .ini file
upon reboot if and only if a boot protocol
is in use and the boot server explicitly
specifies a file to be read. The system
attempts several filenames in the process of
retrieving a .ini file without error. In
order, these filenames are based on the
system's BOOTP- or DHCP-assigned client name,
then the MIB2 sysName, then the system's IP
address, then, as a last resort, the BOOTP- or
DHCP-assigned boot file name. For each
filename, the system attempts to read first
from the designated defaultFileServer, then,
if not successful, from one of either the
BOOTP/DHCP server itself or
bootconfigFileServerAddr (if specified by the
BOOTP/DHCP server).rw Enumeration .1.3.6.1.4.1.522.3.2.2 |
bootconfigServerConfigTimeoutThe time in seconds which the system should
wait for a configuration response from a
BOOTP server before falling back to the
stored configuration.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.2.3 |
bootconfigMultOfferTimeoutThe time, in seconds, which the system should
wait for a better offer configuration response
from a DHCP or BOOTP server before choosing
the best current offer.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.2.4 |
bootconfigReqLeaseDurationThe requested DHCP lease duration, in
minutes.rw Gauge -- Units -- minutes .1.3.6.1.4.1.522.3.2.5 |
bootconfigMinLeaseDurationThe minimum acceptable DHCP lease duration,
in minutes.rw Gauge -- Units -- minutes .1.3.6.1.4.1.522.3.2.6 |
bootconfigDevText string identifying the network device
used for bootstrapping the system via BOOTP or
DHCP. This is only applicable in BOOTP mode
or when the system is configured as a router,
when not all the network interfaces share the
same ifPhysAddress.rw DisplayString .1.3.6.1.4.1.522.3.2.7 |
bootconfigClientAddrIPv4 network address of this device, as
determined by the BOOTP or DHCP protocol.ro IpAddress .1.3.6.1.4.1.522.3.2.8 |
bootconfigHostAddrIPv4 network address of the BOOTP or DHCP
server from which the configuration
of this device was leased.ro IpAddress .1.3.6.1.4.1.522.3.2.9 |
bootconfigBootFileName of the default boot configuration file,
specified by the BOOTP or DHCP server,
containing the system configuration to be
utilized by this device. This is considered
a default configuration file because many
DHCP servers are not capable of distinguishing
boot files between different clients.ro DisplayString .1.3.6.1.4.1.522.3.2.10 |
bootconfigSubnetMaskIPv4 network subnet mask to be used by this
device, as determined by the BOOTP or DHCP
protocol.ro IpAddress .1.3.6.1.4.1.522.3.2.11 |
bootconfigGatewayIPv4 network address of the default network
gateway to be used by this device, as
determined by the BOOTP or DHCP protocol.ro IpAddress .1.3.6.1.4.1.522.3.2.12 |
bootconfigHostNameTextual name of the BOOTP or DHCP server from
which the configuration of this device was
leased. This should be a DNS-recognizable
host name.ro DisplayString .1.3.6.1.4.1.522.3.2.13 |
bootconfigClientNameTextual name of this device, as determined by
the BOOTP or DHCP protocol. This should be a
DNS-recognizable host name.ro DisplayString .1.3.6.1.4.1.522.3.2.14 |
bootconfigNameServerTableTable of DNS Name Servers provided by the
bootconfigHostAddr Boot Server. SEQUENCE OF BootconfigNameServerEntry .1.3.6.1.4.1.522.3.2.15 |
bootconfigNameServerEntryAn entry in bootconfigNameServerTable. BootconfigNameServerEntry .1.3.6.1.4.1.522.3.2.15.1 |
bootconfigNameServerPriorityThe priority order in which a domain name
server is queried. Lower values are queried
first.ro INTEGER .1.3.6.1.4.1.522.3.2.15.1.1 |
bootconfigNameServerThe IPv4 address of a domain name server.ro IpAddress .1.3.6.1.4.1.522.3.2.15.1.2 |
bootconfigDomainNameName of the IP domain of which this device
is a member, as determined by the BOOTP or
DHCP protocol.ro DisplayString .1.3.6.1.4.1.522.3.2.16 |
bootconfigSntpServerIPv4 network address of SNTP server for use
by this device, as determined by the BOOTP or
DHCP protocol.ro IpAddress .1.3.6.1.4.1.522.3.2.17 |
bootconfigSaveServerResponseIf true, the leased configuration from a boot
server is saved as the new system defaults.
If false, system defaults remain unchanged
when a new configuration is leased.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.2.18 |
bootconfigCmdInvokeIniLoadInitiate loading of an initialization
script '.ini' file from the file server
into the system FLASH.
Commands recognized: start.rw AwcInvokeCommand -- Rsyntax INTEGER { -- inactive(1), -- start(2), -- startNotify(3), -- restart(4), -- restartNotify(5), -- cancel(6) -- } .1.3.6.1.4.1.522.3.2.19 |
bootconfigCmdStatusIniLoadStatus of the most recent command to load
an initialization script '.ini' file.
Possible values:
0 = Operation completed successfully (or
has not taken place).
2 = The '.ini' file was not found on the
file server.
12 = Insufficient memory to load the
'.ini' file.
22 = Invalid '.ini' file format.
35 = File format of the '.ini' file is not
supported.
68 = Operation is still in progress. Poll
again later.
72 = Operation was started, but later was
canceled.ro INTEGER .1.3.6.1.4.1.522.3.2.20 |
bootconfigDhcpClassIDSpecification of the DHCP Class Identifier
presented by the system when requesting DHCP
leases.rw DisplayString .1.3.6.1.4.1.522.3.2.24 |
bootconfigFileServerAddrIPv4 network address of the file server from
which to read configuration files, as
determined by the BOOTP or DHCP protocol.ro IpAddress .1.3.6.1.4.1.522.3.2.25 |
bootconfigLogServerAddrIPv4 network address of the host to receive
SYSLOG messages, as determined by the BOOTP
or DHCP protocol.ro IpAddress .1.3.6.1.4.1.522.3.2.26 |
bootconfigBootCountThe number of times the system code has been
restarted since the system left Cisco
manufacturing.ro Gauge .1.3.6.1.4.1.522.3.2.27 |
bootconfigDhcpClientIdTypeThe ARP hardware type, per RFC 1700, of
bootconfigDhcpClientIdValue. If it is not
a hardware address (e.g. is a fully-qualified
domain name), a value of 0 will be used for
the DHCP Client Identifier 'htype' field.rw Enumeration .1.3.6.1.4.1.522.3.2.28 |
bootconfigDhcpClientIdValueSpecification of the DHCP unique client Identifier
presented by the system when requesting DHCP
leases.rw DisplayString .1.3.6.1.4.1.522.3.2.29 |
awcSerialDev OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.3 |
awcSerialConfigTableSerialConfigTable attributes. In tabular form
to allow for multiple instances on an agent. SEQUENCE OF AwcSerialConfigEntry .1.3.6.1.4.1.522.3.3.1 |
awcSerialConfigEntryAn entry in the awcSerialConfigEntry table. AwcSerialConfigEntry .1.3.6.1.4.1.522.3.3.1.1 |
serialDevIndexThe index used to access rows in the
awcSerialConfig table.ro INTEGER .1.3.6.1.4.1.522.3.3.1.1.1 |
serialAdminStatusThe requested status of the serial port.rw Enumeration .1.3.6.1.4.1.522.3.3.1.1.2 |
serialOperStatusThe actual status of the serial port.ro Enumeration .1.3.6.1.4.1.522.3.3.1.1.3 |
serialBaudThe baud rate of the serial port.rw Gauge .1.3.6.1.4.1.522.3.3.1.1.4 |
serialParityThe parity of the serial port.rw Enumeration .1.3.6.1.4.1.522.3.3.1.1.5 |
serialDataBitsThe number of data bits per character
recognized by the serial port.rw Gauge .1.3.6.1.4.1.522.3.3.1.1.6 |
serialStopBitsThe number of stop bits of the serial port.rw Gauge .1.3.6.1.4.1.522.3.3.1.1.7 |
serialFlowControlThe flow control method used by the serial
port.rw Enumeration .1.3.6.1.4.1.522.3.3.1.1.8 |
serialTerminalTypeThe terminal type of the serial port.rw Enumeration .1.3.6.1.4.1.522.3.3.1.1.9 |
serialTerminalLinesThe number of horizontal lines available on
each terminal page. Default 24.rw Gauge .1.3.6.1.4.1.522.3.3.1.1.10 |
serialTerminalColumnsThe number of vertical columns available on
each terminal page. Default 80.rw Gauge .1.3.6.1.4.1.522.3.3.1.1.11 |
serialDevFdThe VxWorks I/O File Descriptor used to access
the serial device.ro INTEGER .1.3.6.1.4.1.522.3.3.1.1.12 |
awcFtp OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.4 |
defaultFileServerThe name of the preferred file server to be
used for all FTP and TFTP Put and Get
operations. Max. name length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.4.1 |
awcFileXferProtocolThe protocol to be used by the system for file
transfer (TFTP or FTP).rw Enumeration .1.3.6.1.4.1.522.3.4.2 |
awcFileXferUserThe name of the user, as required by all FTP
file transfers. Max. name length is 128
octets.rw DisplayString .1.3.6.1.4.1.522.3.4.3 |
awcFileXferPasswordThe password of the user, as required by all
FTP file transfers. Max. password length is
128 octets.rw DisplayString .1.3.6.1.4.1.522.3.4.4 |
awcFileXferCmdInvokeFileLoadInitiate loading of all specified files
from the file server into the system
FLASH.
Commands recognized: start.rw AwcInvokeCommand -- Rsyntax INTEGER { -- inactive(1), -- start(2), -- startNotify(3), -- restart(4), -- restartNotify(5), -- cancel(6) -- } .1.3.6.1.4.1.522.3.4.5 |
awcFileXferCmdStatusFileLoadStatus of the most recent command to load
the specified fileXferFile* files.
Possible values:
0 = Operation completed successfully
(or has not taken place).
2 = At least one file was not found on
the file server.
12 = Insufficient memory to load all
files.
22 = No file specified, or invalid file
format.
35 = File format of at least one of the
files is not supported.
68 = Operation is still in progress.
Poll again later.
72 = Operation was started, but later was
canceled.ro INTEGER .1.3.6.1.4.1.522.3.4.6 |
awcFileXferCmdInvokeFileSaveInitiate saving of all specified
fileXferFile* files to the file server from
the system FLASH.
Commands recognized: start.rw AwcInvokeCommand -- Rsyntax INTEGER { -- inactive(1), -- start(2), -- startNotify(3), -- restart(4), -- restartNotify(5), -- cancel(6) -- } .1.3.6.1.4.1.522.3.4.7 |
awcFileXferCmdStatusFileSaveStatus of the most recent command to save
the specified fileXferFile* files.
Possible values:
0 = Operation completed successfully (or
has not taken place).
1 = Insufficient permission to save the
files.
2 = A directory specified for saving at
least one of the files was not found.
22 = No file specified, or invalid file
format.
68 = Operation is still in progress.
Poll again later.
72 = Operation was started, but later was
canceled.ro INTEGER .1.3.6.1.4.1.522.3.4.8 |
awcFileXferFileFirmwareSystemThe filename of the system firmware image.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.4.9 |
awcFileXferFileFirmwareRadio0The filename of the radio firmware image.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.4.10 |
awcFileXferFileWebUIThe filename of the system Web pages image.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.4.11 |
awcFileXferFileFpgaPcmciaThe filename of the FPGA image for the PCMCIA
controller. Max. string length is 128
octets.rw DisplayString .1.3.6.1.4.1.522.3.4.12 |
awcFileXferTftpPortIP port number over which to perform TFTP
operations. Default 69.rw INTEGER .1.3.6.1.4.1.522.3.4.13 |
awcFileXferFtpDirectoryDirectory on defaultFileServer in which files
are located.rw DisplayString .1.3.6.1.4.1.522.3.4.14 |
awcFileXferFilesFLASHThe filename of a complete FLASH firmware
image for the system, including all
non-configuration files within the system
FLASH file system. Max. string length is 128
octets.rw DisplayString .1.3.6.1.4.1.522.3.4.17 |
awcFileXferFileFirmwareRadio1The filename of the radio firmware image.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.4.18 |
awcIfTableIfTable attributes. In tabular form to
allow for multiple instances on an agent. SEQUENCE OF AwcIfEntry .1.3.6.1.4.1.522.3.5 |
awcIfEntryAn entry in the awcIfEntry table. AwcIfEntry .1.3.6.1.4.1.522.3.5.1 |
awcIfDefaultPhysAddressThe default, factory-assigned MAC address of
the interface. Guaranteed to be unique across
all IEEE 802 devices.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.5.1.1 |
awcIfPhysAddressThe MAC address to be used by the interface.
If awcIfDefaultPhysAddress is to be used, this
is 00:00:00:00:00:00.rw MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.5.1.2 |
awcIfAdoptPrimaryIdentityIf true, this interface adopts the identity of
bootconfigDev, the primary interface. This
includes MAC address, IP address, etc. This
is the conventional mode of operation when
operating as a transparent bridge. If false,
this interface always has a unique MAC
address.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.5.1.3 |
awcIfDefaultIpAddressThe default IPv4 Address of the interface.
If BOOTP or DHCP is enabled, this may be
overridden by the BOOTP or DHCP server.rw IpAddress .1.3.6.1.4.1.522.3.5.1.4 |
awcIfDefaultIpNetMaskThe default IPv4 netmask of the interface.
If BOOTP or DHCP is enabled, this may
be overridden by the BOOTP or DHCP server.rw IpAddress .1.3.6.1.4.1.522.3.5.1.5 |
awcIfIpAddressThe IPv4 Address currently in use by the
interface.ro IpAddress .1.3.6.1.4.1.522.3.5.1.6 |
awcIfIpNetMaskThe IPv4 netmask currently in use by the
interface.ro IpAddress .1.3.6.1.4.1.522.3.5.1.7 |
awcIfMSDUMaxLengthMaximum length of the data portion of a packet
for this particular interface. This is the
maximum MAC Service Data Unit length, which is
greater than or equal to ifMtu, depending on
the configured MAC-level encapsulation.ro Gauge .1.3.6.1.4.1.522.3.5.1.8 |
awcIfOutDiscardsCoS0The number of outbound packets of CoS 0 which
were chosen to be discarded even though no
errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a packet could be to free up
buffer space. Another reason would be
exceeding their maximum time-to-live.ro Counter .1.3.6.1.4.1.522.3.5.1.9 |
awcIfOutDiscardsCoS1The number of outbound packets of CoS 1 which
were chosen to be discarded even though no
errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a packet could be to free up
buffer space. Another reason would be
exceeding their maximum time-to-live.ro Counter .1.3.6.1.4.1.522.3.5.1.10 |
awcIfOutDiscardsCoS2The number of outbound packets of CoS 2 which
were chosen to be discarded even though no
errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a packet could be to free up
buffer space. Another reason would be
exceeding their maximum time-to-live.ro Counter .1.3.6.1.4.1.522.3.5.1.11 |
awcIfOutDiscardsCoS3The number of outbound packets of CoS 3 which
were chosen to be discarded even though no
errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a packet could be to free up
buffer space. Another reason would be
exceeding their maximum time-to-live.ro Counter .1.3.6.1.4.1.522.3.5.1.12 |
awcIfOutDiscardsCoS4The number of outbound packets of CoS 4 which
were chosen to be discarded even though no
errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a packet could be to free up
buffer space. Another reason would be
exceeding their maximum time-to-live.ro Counter .1.3.6.1.4.1.522.3.5.1.13 |
awcIfOutDiscardsCoS5The number of outbound packets of CoS 5 which
were chosen to be discarded even though no
errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a packet could be to free up
buffer space. Another reason would be
exceeding their maximum time-to-live.ro Counter .1.3.6.1.4.1.522.3.5.1.14 |
awcIfOutDiscardsCoS6The number of outbound packets of CoS 6 which
were chosen to be discarded even though no
errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a packet could be to free up
buffer space. Another reason would be
exceeding their maximum time-to-live.ro Counter .1.3.6.1.4.1.522.3.5.1.15 |
awcIfOutDiscardsCoS7The number of outbound packets of CoS 7 which
were chosen to be discarded even though no
errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a packet could be to free up
buffer space. Another reason would be
exceeding their maximum time-to-live.ro Counter .1.3.6.1.4.1.522.3.5.1.16 |
awc802dot11 OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.6 |
awcDot11smt OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.6.1 |
awcDot11StationConfigTableStation Config Table attributes. In tabular
form to allow for multiple instances on an
agent. SEQUENCE OF AwcDot11StationConfigEntry .1.3.6.1.4.1.522.3.6.1.1 |
awcDot11StationConfigEntryAn entry in the awcDot11StationConfigTable
table. AwcDot11StationConfigEntry .1.3.6.1.4.1.522.3.6.1.1.1 |
awcDot11StationRoleThe role of this station itself within the
802.11 BSS (radio cell) of which it is a
member.rw Enumeration .1.3.6.1.4.1.522.3.6.1.1.1.1 |
awcDot11PowerManagementSubModeWhen configured as roleClient, the Power
Management Submode of the device.rw Gauge .1.3.6.1.4.1.522.3.6.1.1.1.2 |
awcDot11UseAWCExtensionsIf true, Aironet extensions to the basic
802.11 protocol are enabled. This results in
better BSS performance and faster roaming.
If false, only the basic 802.11 protocols
are used. This ensures maximum compatibility
with non-Aironet equipment.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.3 |
awcDot11AllowAssocBroadcastSSIDIf true and awcDot11StationRole is either
roleAP or roleRepeater, the radio will respond
to Broadcast SSID Probe Requests and will
broadcast its own SSID within its Beacons. If
false, the radio will not respond to the
Broadcast SSID and will not broadcast its SSID
within Beacons.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.4 |
awcDot11PrivacyOptionImplementedMaxRateThe maximum Transmit bit rate supported by the
radio when using WEP encryption. Expressed in
standard 802.11 increments of 500Kb/sec.ro INTEGER .1.3.6.1.4.1.522.3.6.1.1.1.5 |
awcDot11DesiredBSSLengthThe number of entries in
awcDot11DesiredBSSTable.ro INTEGER .1.3.6.1.4.1.522.3.6.1.1.1.6 |
awcDot11EnetEncapsulationDefaultThe Ethernet Encapsulation Transform type used
within the BSS. Either IEEE 802.1H or
RFC 1042 can be utilized. IEEE 802.1H
provides exceptions for the Novel
IPX and AARP protocols.rw Enumeration .1.3.6.1.4.1.522.3.6.1.1.1.7 |
awcDot11ForceReqFirmwareVersionIf true, the radio driver will only allow
operation with the specific radio firmware
revision with which it was originally tested.
If false, the radio driver will allow
operation with the radio firmware revision
with which it was tested, or any later radio
firmware revision.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.8 |
awcDot11BridgeSpacingIf this device is the root side of a Bridge
configuration, this value is the distance in
kilometers reported between this device and
its farthest non-root Bridge.rw Gauge .1.3.6.1.4.1.522.3.6.1.1.1.9 |
awcDot11DesiredSSIDMaxAssociatedSTAThe maximum number of 802.11 Stations which
may Associate with this access point through
either the Broadcast SSID or through
dot11DesiredSSID. If 0, the maximum number
is limited only by the 802.11 standard and
by any hardware or radio firmware limitations
of the access point.rw INTEGER .1.3.6.1.4.1.522.3.6.1.1.1.10 |
awcDot11DesiredSSIDNumAssociatedSTAThe current number of 802.11 Stations which
are Associated with this access point through
either the Broadcast SSID or through
dot11DesiredSSID.ro INTEGER .1.3.6.1.4.1.522.3.6.1.1.1.11 |
awcDot11AuxiliarySSIDLengthThe maximum number of entries in
awcDot11AuxiliarySSIDTable. If
awcDot11MultipleSSIDPerBSSImplemented is FALSE,
awcDot11AuxiliarySSIDLength must be 0.ro INTEGER .1.3.6.1.4.1.522.3.6.1.1.1.12 |
awcDot11MultipleSSIDPerBSSImplementedThis attribute, when TRUE, indicates that the station
implementation is capable of responding to 802.11
Probe Requests for SSIDs other than dot11DesiredSSID.
The default value of this attribute is FALSE.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.13 |
awcDot11SymbolExtensionsImplementedThis attribute, when TRUE, indicates that the station
implementation is capable of generating Symbol, Inc.
proprietary elements in its Beacons and Probe
Responses. These elements enable support for Symbol
Voice-over-IP (VoIP) phones. The default value of
this attribute is FALSE.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.14 |
awcDot11SymbolExtensionsEnabledShould the Radio generate Symbol, Inc. proprietary
elements in its Beacons and Probe Responses in support
of Symbol VoIP phones?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.15 |
awcDot11DesiredSSIDMicAlgorithmAuxiliary Message Integrity Check (MIC) calculated on
WEP-encoded packets of stations Associated to this
access point through either the Broadcast SSID or
dot11DesiredSSID.rw AwcDot11MicAlgorithm -- Rsyntax INTEGER { -- micNone(1), -- micMMH(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.16 |
awcDot11DesiredSSIDWEPKeyPermuteAlgorithmFunction through which the WEP encryption key is
permuted between key renewal periods for stations
Associated to this access point through either the
Broadcast SSID or dot11DesiredSSID.rw AwcDot11WEPKeyPermuteAlgorithm -- Rsyntax INTEGER { -- wepPermuteNone(1), -- wepPermuteIV(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.17 |
awcDot11DesiredSSIDInfrastructureWGBWhen true, Workgroup Bridge-class devices Associated to
this access point through either the
Broadcast SSID or dot11DesiredSSID are provided
the class of service which is provided to network
infrastructure stations by their parent access point.
This includes use of the 802.11 reliable multicast
protocol (4-address packets for multicast). When false,
Workgroup Bridge-class devices are provided the class of
service which is provided to ordinary client stations.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.18 |
awcDot11DesiredSSIDDefaultPolIdDefault Policy Group Identifier for stations
Associated to this access point through either the
Broadcast SSID or dot11DesiredSSID. A value of 0
indicates that no special policies are to be applied
by default.rw AwcPolId -- Rsyntax INTEGER .1.3.6.1.4.1.522.3.6.1.1.1.19 |
awcDot11DesiredSSIDDefaultVlanIdDefault VLAN Identifier for stations
Associated to this access point through either the
Broadcast SSID or dot11DesiredSSID. A value of 0
indicates that either VLANs are disabled or that
the default VLAN is awcNativeVlanId.rw AwcVlanId -- Rsyntax INTEGER .1.3.6.1.4.1.522.3.6.1.1.1.20 |
awcDot11DesiredSSIDEnableProxyMobileIPIf true, Proxy Mobile IP is enabled for use by
all stations Associated to this access point
through either the Broadcast SSID or
dot11DesiredSSID.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.21 |
awcDot11InfrastructureSSIDIndex of the SSID which all 802.11 infrastructure
stations shall use for Association. If 0, an
access point and its repeaters and other
subordinate infrastructure devices will Associate
through dot11DesiredSSID. If non-0, an access
point and its subordinate infrastructure devices
will Associate through the auxiliary SSID with
awcDot11AuxSSIDIndex equal to
awcDot11InfrastructureSSID.rw INTEGER .1.3.6.1.4.1.522.3.6.1.1.1.22 |
awcDot11QBSSElementImplementedThis attribute, when TRUE, indicates that the station
implementation is capable of generating 802.11e QBSS
elements in its Beacons and Probe
Responses. These elements enable support for basic
802.11 Quality of Service. The default value of
this attribute is FALSE.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.23 |
awcDot11QBSSElementEnabledShould the Radio generate 802.11e QBSS
elements in its Beacons and Probe Responses in support
of 802.11 Quality of Service?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.24 |
awcDot11InfrastructureSSIDExclusiveShould this access point restrict all infrastructure
stations to associate only through the SSID specified
by awcDot11InfrastructureSSID?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.25 |
awcDot11SendIGMPGeneralQueryShould this access point issue an IGMP General Query
to all associated stations when they complete all
required high-level authentication? Such an IGMP
query can help configure multicast groups efficiently.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.1.1.26 |
awcDot11AuthenticationAlgorithmsTableThis table contains attributes to configure
authentication algorithm parameters for associations
through the SSID defined by IEEE802dot11-MIB
dot11DesiredSSID object. It defines attributes
additional to those defined in the IEEE802dot11-MIB
dot11AuthenticationAlgorithmsTable. An interface
may support multiple authentication algorithms.
This table has an expansion dependent relationship
on the ifTable. For each entry in this table,
there exists at least an entry in the ifTable of
ifType ieee80211(71). This table uses the
dot11AuthenticationAlgorithmsIndex of the
dot11AuthenticationAlgorithmsTable defined in the
IEEE802dot11-MIB as the expansion index.
Entries in this table cannot be created or deleted
by the network management system. All entries are
created or deleted by the agent. SEQUENCE OF AwcDot11AuthenticationAlgorithmsEntry .1.3.6.1.4.1.522.3.6.1.2 |
awcDot11AuthenticationAlgorithmsEntryEach entry specifies Cisco Aironet product
specific authentication algorithm
configuration attributes of the dot11DesiredSSID
on a radio interface. AwcDot11AuthenticationAlgorithmsEntry .1.3.6.1.4.1.522.3.6.1.2.1 |
awcDot11AuthenticationAlgorithmsIndexThe auxiliary variable used to identify instances
of the columnar objects in the Aironet Authentication
Algorithms Table. This variable corresponds directly
to the 802.11 dot11AuthenticationAlgorithmsIndex. INTEGER .1.3.6.1.4.1.522.3.6.1.2.1.1 |
awcDot11AuthenticationRequireEAPIf true, stations authenticating with the
corresponding dot11AuthenticationAlgorithm
must complete network-level EAP authentication
before they will be unblocked. If false,
stations authenticating with the corresponding
dot11AuthenticationAlgorithm will be unblocked
as soon as they complete the requirements of
802.11 authentication.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.2.1.2 |
awcDot11AuthenticationDefaultUcastAllowedToGoToThe set of ports to which frames received from
a specific port and destined for a MAC address
which is not already listed in dot1dStaticTable
and authenticates with the corresponding
dot11AuthenticationAlgorithm, are allowed to be
forwarded. Each octet within the value of this
object specifies a set of eight ports, with the
first octet specifying ports 1 through 8, the
second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit
represents the lowest numbered port, and the
least significant bit represents the highest
numbered port. Thus, each port of the bridge is
represented by a single bit within the value of
this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of ones of appropriate
length.rw OCTET STRING .1.3.6.1.4.1.522.3.6.1.2.1.3 |
awcDot11WEPDefaultKeysTableExtension of dot11WEPDefaultKeysTable to allow
for key lengths other than 40 bits. SEQUENCE OF AwcDot11WEPDefaultKeysEntry .1.3.6.1.4.1.522.3.6.1.3 |
awcDot11WEPDefaultKeysEntryAn entry in the awcDot11WEPDefaultKeysTable
table. AwcDot11WEPDefaultKeysEntry .1.3.6.1.4.1.522.3.6.1.3.1 |
awcDot11WEPDefaultKeyIndexThe auxiliary variable used to identify
instances of the columnar objects in the WEP
Default Keys Table. The value of this
variable is equal to the WEPDefaultKeyID + 1ro INTEGER .1.3.6.1.4.1.522.3.6.1.3.1.1 |
awcDot11WEPDefaultKeyLenLength in octets of
awcDot11WEPDefaultKeyValue. If 0, the
corresponding awcDot11WEPDefaultKeyValue is
not configured.rw INTEGER .1.3.6.1.4.1.522.3.6.1.3.1.2 |
awcDot11WEPDefaultKeyValueA WEP default secret key value. The value is
write-only (attempt to read will result in
return of a zero-length string).rw WEPKeytype128 -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.6.1.3.1.3 |
awcDot11PrivacyTableAdditional information about the WEP
capabilities of the device. In tabular form
to allow for multiple instances on an agent. SEQUENCE OF AwcDot11PrivacyEntry .1.3.6.1.4.1.522.3.6.1.5 |
awcDot11PrivacyEntryAn entry in the awcDot11PrivacyTable table. AwcDot11PrivacyEntry .1.3.6.1.4.1.522.3.6.1.5.1 |
awcDot11WEPDefaultKeyMaxIndexThe maximum WEP Default Key index which the
radio supports. Range 1..4, or 0 if the radio
does not support WEP.ro INTEGER .1.3.6.1.4.1.522.3.6.1.5.1.1 |
awcDot11AllowEncryptedWhen this attribute is true, the STA shall
indicate at the MAC service interface received
MSDUs regardless of the setting of the WEP
subfield of the Frame Control field, so long
as the dot11ExcludeUnencrypted attribute is
false. The default value of this attribute
shall be false.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.5.1.2 |
awcDot11WEPKeyMaxLenThe maximum WEP Key Length which the radio
supports. Range 0..16, or 0 if the radio does
not support WEP. Note that, even if the radio
supports more than 13 octets of key value, the
current 802.11 standard only makes use of
the first 13 octets.ro INTEGER .1.3.6.1.4.1.522.3.6.1.5.1.3 |
awcDot11LEAPUserNameUser Name assigned to the system for use when
authenticating with AAA servers.rw OCTET STRING .1.3.6.1.4.1.522.3.6.1.5.1.4 |
awcDot11LEAPPasswordUser Password (shared secret) assigned to the system
for use when authenticating with AAA servers.rw OCTET STRING .1.3.6.1.4.1.522.3.6.1.5.1.5 |
awcDot11DesiredBSSTableWhen the radio is not in roleAP, a list of
preferred Access Points with which the radio
should Associate. In tabular form to allow for
multiple instances on an agent. SEQUENCE OF AwcDot11DesiredBSSEntry .1.3.6.1.4.1.522.3.6.1.6 |
awcDot11DesiredBSSEntryAn entry in the awcDot11DesiredBSSTable
table. AwcDot11DesiredBSSEntry .1.3.6.1.4.1.522.3.6.1.6.1 |
awcDot11DesiredBSSIndexThe priority order in which Preferred Access
Points should be probed. Lower indices are
probed first.ro INTEGER .1.3.6.1.4.1.522.3.6.1.6.1.1 |
awcDot11DesiredBSSThe BSS identifier (MAC address) of the Access
Point with which the radio should try to
Associate, or 00:00:00:00:00:00 if the BSS
identifier for this priority is unspecified.rw MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.6.1.6.1.2 |
awcDot11AuxiliarySSIDTableWhen the radio is not in roleClient, a list of
Stations which, when Associated to this system,
shall always have the same AID. SEQUENCE OF AwcDot11AuxiliarySSIDEntry .1.3.6.1.4.1.522.3.6.1.7 |
awcDot11AuxiliarySSIDEntryAn entry in the awcDot11AuxiliarySSIDTable
table. AwcDot11AuxiliarySSIDEntry .1.3.6.1.4.1.522.3.6.1.7.1 |
awcDot11AuxSSIDIndexIdentifier of auxiliary SSIDs supported by the access
point in addition to dot11DesiredSSID. Domain from 1
to awcDot11AuxiliarySSIDLength.ro INTEGER .1.3.6.1.4.1.522.3.6.1.7.1.1 |
awcDot11AuxSSIDThis attribute reflects a Service Set ID recognized
by the access point. The access point shall respond
to Probe Requests specifying this SSID, but does not
advertise this SSID in its Beacons.rw OCTET STRING .1.3.6.1.4.1.522.3.6.1.7.1.2 |
awcDot11AuxSSIDMaxAssociatedSTAThe maximum number of 802.11 Stations which
may Associate with this access point through
awcDot11AuxSSID. If 0, the maximum number
is limited only by the 802.11 standard and
by any hardware or radio firmware limitations
of the access point.rw INTEGER .1.3.6.1.4.1.522.3.6.1.7.1.3 |
awcDot11AuxSSIDNumAssociatedSTAThe current number of 802.11 Stations which
are Associated with this access point through
awcDot11AuxSSID.ro INTEGER .1.3.6.1.4.1.522.3.6.1.7.1.4 |
awcDot11AuxSSIDDefaultPolIdDefault Policy Group Identifier for stations
Associated to this access point over awcDot11AuxSSID.
A value of 0 indicates that no special policies are
to be applied by default.rw AwcPolId -- Rsyntax INTEGER .1.3.6.1.4.1.522.3.6.1.7.1.6 |
awcDot11AuxSSIDDefaultVlanIdDefault VLAN Identifier for stations
Associated to this access point over awcDot11AuxSSID.
A value of 0 indicates that either VLANs are disabled
or that the default VLAN is awcNativeVlanId.rw AwcVlanId -- Rsyntax INTEGER .1.3.6.1.4.1.522.3.6.1.7.1.7 |
awcDot11AuxSSIDEnableProxyMobileIPIf true, Proxy Mobile IP is enabled for use by
all stations Associated to this access point
over awcDot11AuxSSID.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.7.1.8 |
awcDot11AuxSSIDAuthAlgTableThis (conceptual) table of attributes shall be a set of
all the Aironet-specific parameters for each authentication
algorithm supported by the station for each auxiliary SSID
listed in awcDot11AuxiliarySSIDTable. SEQUENCE OF AwcDot11AuxSSIDAuthAlgEntry .1.3.6.1.4.1.522.3.6.1.8 |
awcDot11AuxSSIDAuthAlgEntryAn Entry (conceptual row) in the Aironet Auxiliary SSID
Authentication Algorithms Table.
ifIndex - Each 802.11 interface is represented by an
ifEntry. Interface tables in this MIB module are indexed
by ifIndex. AwcDot11AuxSSIDAuthAlgEntry .1.3.6.1.4.1.522.3.6.1.8.1 |
awcDot11AuxSSIDAuthAlgIndexThe auxiliary variable used to identify instances
of the columnar objects in the Aironet Auxiliary SSID
Authentication Algorithms Table. This variable
corresponds directly to the 802.11
dot11AuthenticationAlgorithmsIndex. INTEGER .1.3.6.1.4.1.522.3.6.1.8.1.1 |
awcDot11AuxSSIDAuthAlgEnableIf true, stations may authenticate to the SSID
specified by awcDot11AuxSSIDIndex with the algorithm
corresponding to dot11AuthenticationAlgorithmsIndex.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.8.1.2 |
awcDot11AuxSSIDAuthAlgRequireEAPIf true, stations authenticating to the SSID
specified by awcDot11AuxSSIDIndex with the
corresponding dot11AuthenticationAlgorithm
must complete network-level EAP authentication
before they will be unblocked. If false,
stations authenticating with the corresponding
dot11AuthenticationAlgorithm will be unblocked
as soon as they complete the requirements of
802.11 authentication.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.1.8.1.3 |
awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoToThe set of ports to which frames received from a
specific port and destined for a MAC address which
is not already listed in dot1dStaticTable and
authenticates to the SSID specified by
awcDot11AuxSSIDIndex with the corresponding
dot11AuthenticationAlgorithm, are
allowed to be forwarded. Each octet
within the value of this object specifies a set of
eight ports, with the first octet specifying ports
1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of ones of appropriate
length.rw OCTET STRING .1.3.6.1.4.1.522.3.6.1.8.1.4 |
awcDot11AssignedAIDTableWhen the radio is not functioning as a client
station (i.e., awcDot11StationRole is not
'roleClient'), this is the list of AIDs which
this agent will assign to the clients
associating with it. An AID is assigned if
the corresponding MAC address matches that of
the client. This table has an expansion
dependent relationship on the ifTable. For
each entry in this table, there exists at least
an entry in the ifTable of ifType ieee80211(71). SEQUENCE OF AwcDot11AssignedAIDEntry .1.3.6.1.4.1.522.3.6.1.9 |
awcDot11AssignedAIDEntryAn entry in the awcDot11AssignedAIDTable
table. AwcDot11AssignedAIDEntry .1.3.6.1.4.1.522.3.6.1.9.1 |
awcDot11AssignedAIDAn AID which shall be reserved for the
exclusive use of a single Station.ro INTEGER .1.3.6.1.4.1.522.3.6.1.9.1.1 |
awcDot11AssignedSTAThe Station (MAC address) which, when
Associated to this system, shall always
be assigned awcDot11AssignedAID as its
802.11 AID.rw MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.6.1.9.1.2 |
awcDot11AccessPointCountersTableThis table includes radio statistics collected
by the IEEE 802.11 radio interface. This
table has a sparse dependent relationship on
the ifTable. For each entry in this table,
there exists an entry in the ifTable of
ifType ieee80211(71). SEQUENCE OF AwcDot11AccessPointCountersEntry .1.3.6.1.4.1.522.3.6.1.10 |
awcDot11AccessPointCountersEntryEach entry contains counters of frame
transmissions and client associations for a
radio interface. AwcDot11AccessPointCountersEntry .1.3.6.1.4.1.522.3.6.1.10.1 |
awcDot11AssociatedStationCountTotal number of successful 802.11 Association Request
operations to this radio of this access point since system
startup.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.1 |
awcDot11AuthenticatedStationCountTotal number of successful 802.11 MAC-level
Authentication operations to this radio of this access
point since system startup.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.2 |
awcDot11ReassociatedStationCountTotal number of successful 802.11 Reassociation Request
operations to this radio of this access point since system
startup.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.3 |
awcDot11RoamedStationCountTotal number of times that clients which had
successfully (re)associated with this access point
successfully reassociated with another access point
since system startup.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.4 |
awcDot11DeauthenticateCountTotal number of Deauthenticate frames sent over this
radio of this access point since system startup.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.5 |
awcDot11DisassociateCountTotal number of Disassociate frames sent over this
radio of this access point since system startup.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.6 |
awcDot11EncapPktsMMHTotal number of packets for which the a MIC has been
requested to be calculated with the MMH algorithm
before being submitted for transmission over
this radio of this access point since system startup.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.7 |
awcDot11DecapPktsMMHTotal number of packets received over this radio of
this access point since system startup and for which
a MIC has been requested to be validated with the
MMH algorithm.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.8 |
awcDot11EncapErrorsMMHTotal number of packets which have failed MIC
calculation with the MMH algorithm before being
submitted for transmission over this
radio of this access point since system startup.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.9 |
awcDot11DecapErrorsMMHTotal number of packets received over this radio of
this access point since system startup which have
failed MIC validation with the MMH algorithm.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.10 |
awcDot11DecapExistsMMHTotal number of packets received over this radio of
this access point since system startup which have
failed MIC validation with the MMH algorithm
specifically due to sequence number and duplicate
packet errors.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.11 |
awcDot11DecapAccessMMHTotal number of packets received over this radio of
this access point since system startup which have
failed MIC validation with the MMH algorithm
specifically due to cryptographic key-mismatch
errors.ro Counter .1.3.6.1.4.1.522.3.6.1.10.1.12 |
awcDot11mac OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.6.2 |
awcDot11CountersTableThis table contains MAC statistics
on each of IEEE 802.11 interface.
This table has a sparse dependent
relationship on the ifTable. For
each entry in this table, there exists
an entry in the ifTable of ifType
ieee80211(71). SEQUENCE OF AwcDot11CountersEntry .1.3.6.1.4.1.522.3.6.2.2 |
awcDot11CountersEntryEach entry contains counters of frame
transmissions for a radio interface. AwcDot11CountersEntry .1.3.6.1.4.1.522.3.6.2.2.1 |
awcDot11TxDeferEnergyCountTotal number of frames deferred transmission
due to energy detect since system startup.ro Counter .1.3.6.1.4.1.522.3.6.2.2.1.1 |
awcDot11RxMacCrcErrorCountTotal number of frames received with
MAC CRC errors since system startup.ro Counter .1.3.6.1.4.1.522.3.6.2.2.1.2 |
awcDot11SsidMismatchCountTotal number of Beacon or Probe Response frames received
for which the SSID does not match dot11DesiredSSID
since system startup.ro Counter .1.3.6.1.4.1.522.3.6.2.2.1.3 |
awcDot11QoSTableThis (conceptual) table of attributes shall be a set of
parameters for each traffic category (i.e. 802.1D priority)
of packet passed over the radio. SEQUENCE OF AwcDot11QoSEntry .1.3.6.1.4.1.522.3.6.2.4 |
awcDot11QoSEntryAn Entry (conceptual row) in the Aironet Quality of
Service Table.
ifIndex - Each 802.11 interface is represented by an
ifEntry. Interface tables in this MIB module are indexed
by ifIndex. AwcDot11QoSEntry .1.3.6.1.4.1.522.3.6.2.4.1 |
awcDot11QoSCoSThe auxiliary variable used to identify instances
of the columnar objects in the Aironet Quality of
Service Table. This variable corresponds directly to
the 802.1D traffic category ID, plus 1. INTEGER .1.3.6.1.4.1.522.3.6.2.4.1.1 |
awcDot11QoSCWmin802.11 CWmin of the traffic category. The value of this OID
must be one of the set 0, 1, 3, 7, 15, 31, 63, 127, 255, 511,
or 1023, and must be less than or equal to awcDot11QoSCWmax.rw INTEGER .1.3.6.1.4.1.522.3.6.2.4.1.2 |
awcDot11QoSCWmax802.11 CWmax of the traffic category. The value of this OID
must be one of the set 1, 3, 7, 15, 31, 63, 127, 255, 511,
or 1023, and must be greater than or equal to awcDot11QoSCWmin.rw INTEGER .1.3.6.1.4.1.522.3.6.2.4.1.3 |
awcDot11res OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.6.3 |
awcDot11resAttribute OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.6.3.1 |
awcDot11ResourceInfoTableResource Info Table attributes. In tabular
form to allow for multiple instances on an
agent. SEQUENCE OF AwcDot11ResourceInfoEntry .1.3.6.1.4.1.522.3.6.3.1.2 |
awcDot11ResourceInfoEntryAn entry in the awcDot11ResourceInfoTable
table. AwcDot11ResourceInfoEntry .1.3.6.1.4.1.522.3.6.3.1.2.1 |
awcDot11FirmwareBootstrapVersionThe firmware version of the radio boot block.
Max. string length is 128 octets.ro DisplayString .1.3.6.1.4.1.522.3.6.3.1.2.1.1 |
awcDot11phy OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.6.4 |
awcDot11PhyOperationTableawcDot11PhyOperationTable attributes. In
tabular form to allow for multiple instances
on an agent. SEQUENCE OF AwcDot11PhyOperationEntry .1.3.6.1.4.1.522.3.6.4.1 |
awcDot11PhyOperationEntryAn entry in the awcDot11PhyOperationTable
table. AwcDot11PhyOperationEntry .1.3.6.1.4.1.522.3.6.4.1.1 |
awcDot11CurrentCarrierSetThe carrier set of the device. The Carrier
Set implies a Regulatory Domain, but
geographic-specific restrictions within a
Regulatory Domain may necessitate several
Carrier Sets within the Regulatory Domain.ro Enumeration .1.3.6.1.4.1.522.3.6.4.1.1.1 |
awcDot11ModulationTypeThe RF modulation of the radio.rw Enumeration .1.3.6.1.4.1.522.3.6.4.1.1.2 |
awcDot11PreambleTypeThe current radio preamble type in use by the
Station.
Possible values:
1 = Use long preambles whenever possible.
2 = Use only short preambles.rw Enumeration .1.3.6.1.4.1.522.3.6.4.1.1.3 |
awcDot11PHYTypeThis is an 8-bit integer value that identifies the PHY type
supported by the attached PLCP and PMD. Currently defined
values and their corresponding PHY types are:
FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03,
DSSS 5.0 GHz = 11ro Enumeration .1.3.6.1.4.1.522.3.6.4.1.1.5 |
awcDot11PhyFHSSTableawcDot11PhyFHSSTable attributes. In tabular
form to allow for multiple instances on an
agent. SEQUENCE OF AwcDot11PhyFHSSEntry .1.3.6.1.4.1.522.3.6.4.4 |
awcDot11PhyFHSSEntryAn entry in the awcDot11PhyFHSSTable table. AwcDot11PhyFHSSEntry .1.3.6.1.4.1.522.3.6.4.4.1 |
awcDot11Compatible3100Boolean on whether or not the Station should
use 1Mb/sec management frames to be compatible
with Aironet 3100 series radios.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.4.4.1.1 |
awcDot11PhyDSSSTableawcDot11PhyDSSSTable attributes. In tabular
form to allow for multiple instances on an
agent. SEQUENCE OF AwcDot11PhyDSSSEntry .1.3.6.1.4.1.522.3.6.4.5 |
awcDot11PhyDSSSEntryAn entry in the awcDot11PhyDSSSTable table. AwcDot11PhyDSSSEntry .1.3.6.1.4.1.522.3.6.4.5.1 |
awcDot11Compatible4500Boolean on whether or not the Station should
use 2Mb/sec management frames to be compatible
with Aironet 4500 series radios.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.4.5.1.1 |
awcDot11ChannelAutoImplementedIf true, the radio can, when
awcDot11StationRole is roleAP, scan for other
BSS activity on all channels available in the
current awcDot11CurrentCarrierSet before
establishing its own BSS. If false, the radio
can only establish its BSS on
dot11CurrentChannel.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.4.5.1.2 |
awcDot11ChannelAutoEnabledIf true and awcDot11StationRole is roleAP, the
radio will scan for other BSS activity on all
channels available in the current
awcDot11CurrentCarrierSet before establishing
its own BSS. After the scan, this station
will establish its own BSS on the channel it
considers to have the least probability of
congestion. If false, this station always
establishes its BSS on dot11CurrentChannel.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.4.5.1.3 |
awcDot11CurrentChannelThe current operating frequency channel of the DSSS
PHY, as selected either by selective scanning or
via dot11CurrentChannel. Valid channel numbers
are as defined in 15.4.6.2ro INTEGER .1.3.6.1.4.1.522.3.6.4.5.1.4 |
awcDot11SupportedDataRatesPrivacyTableFor each transmit and receive bit rate, whether or not
the radio can support WEP encryption at that rate. SEQUENCE OF AwcDot11SupportedDataRatesPrivacyEntry .1.3.6.1.4.1.522.3.6.4.11 |
awcDot11SupportedDataRatesPrivacyEntryAn Entry (conceptual row) in the
awcDot11SupportedDataRatesPrivacy Table.
ifIndex - Each 802.11 interface is represented by an
ifEntry. Interface tables in this MIB module are indexed
by ifIndex. AwcDot11SupportedDataRatesPrivacyEntry .1.3.6.1.4.1.522.3.6.4.11.1 |
awcDot11SupportedDataRatesPrivacyIndexIndex object which identifies which data rate to access.
Range is 1..8.ro INTEGER .1.3.6.1.4.1.522.3.6.4.11.1.1 |
awcDot11SupportedDataRatesPrivacyValueThe receive or transmit bit rates supported by the PLCP
and PMD, represented by a count from X02-X7f,
corresponding to data rates in increments of 500Kb/s from
1 Mb/s to 63.5 Mb/s.ro INTEGER .1.3.6.1.4.1.522.3.6.4.11.1.2 |
awcDot11SupportedDataRatesPrivacyImplementedWhether or not WEP encryption is supported by the radio
for both Transmit and Receive operations at the
corresponding bit rate specified by
awcDot11SupportedDataRatesPrivacyValue.ro TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.4.11.1.3 |
awcDot11ChanSelectTableThis table specifies for each 802.11 channel,
whether the scanning process controlled by the
awcDot11ChannelAutoEnabled can select a
particular channel for use. This table has an
expansion dependent relationship on the ifTable.
For each entry in this table, there exists at least
an entry in the ifTable of ifType ieee80211(71).
Entries in this table cannot be created or deleted
by the network management system. All entries are
created or deleted by the agent. SEQUENCE OF AwcDot11ChanSelectEntry .1.3.6.1.4.1.522.3.6.4.12 |
awcDot11ChanSelectEntryEach entry specifies if a particular radio channel
is enabled on a radio interface. AwcDot11ChanSelectEntry .1.3.6.1.4.1.522.3.6.4.12.1 |
awcDot11ChanSelectChannel802.11 channel which is a candidate for low-occupancy
scanning.ro INTEGER .1.3.6.1.4.1.522.3.6.4.12.1.1 |
awcDot11ChanSelectEnableIf true, awcDot11ChanSelectChannel is available for the
system to use as its awcDot11CurrentChannel after scanning
for channel occupancy. If false, awcDot11ChanSelectChannel
is not available.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.6.4.12.1.2 |
awcUserMgr OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.7 |
userMgrConfigTableSystem User attributes. SEQUENCE OF UserMgrConfigEntry .1.3.6.1.4.1.522.3.7.1 |
userMgrConfigEntryAn entry in the user manager table. UserMgrConfigEntry .1.3.6.1.4.1.522.3.7.1.1 |
userMgrUserIndexThe index of the user.ro Gauge .1.3.6.1.4.1.522.3.7.1.1.1 |
userMgrUserNameThe name of the user. This should be unique
across all users. Max. string length is 32
octets.rw DisplayString .1.3.6.1.4.1.522.3.7.1.1.2 |
userMgrPasswordThe SHA-1 hashed password of the user in the
user manager. When a plaintext password is
written, it is automatically replaced by the
SHA-1 Secure Hash of that plaintext, prefixed
by a 4-octet magic cookie. Max. string length
is 24 octets.rw OCTET STRING .1.3.6.1.4.1.522.3.7.1.1.3 |
userMgrCapabilitiesBitmask of the capabilities of the user.
The value may be any combination (sum)
of the following capability values:
0 = none
1 = Administrator
2 = Write
4 = Firmware Update
8 = Identity Update
16 = SNMP Communityrw Gauge .1.3.6.1.4.1.522.3.7.1.1.4 |
userMgrStatusRow status of the user. Allows deletion via SNMP.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.7.1.1.5 |
enableUserMgrIf true, the User Manager subsystem is active.
Web page, console, and SNMP access is
restricted in accordance with
userMgrCapabilities. If false, all users have
full access to the system.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.7.2 |
allowBrowseWithoutLoginIf true, the HTTP user interface to read-only
web pages can be accessed without passing
HTTP authentication. If false, any HTTP
access requires the user to pass HTTP
authentication.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.7.3 |
protectLegalPageShould the legal credits page be protected or
not.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.7.4 |
awcHttpd OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.8 |
defaultWebRootFile directory which contains the system's
web site root file index.shm. Max. string
length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.8.1 |
defaultHelpRootURL identifying the directory in which help
pages for the system are located. This URL
is prefixed to all help page links.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.8.2 |
getWebUIThe name of an auxilliary set of HTML user
interface files to be loaded at system boot
time from defaultFileServer. Archive
formats accepted include .tar and .tar.gz.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.8.3 |
cmdInvokeGetWebUIInitiate loading of the getWebUI file.
Commands recognized: start.rw AwcInvokeCommand -- Rsyntax INTEGER { -- inactive(1), -- start(2), -- startNotify(3), -- restart(4), -- restartNotify(5), -- cancel(6) -- } .1.3.6.1.4.1.522.3.8.4 |
cmdStatusGetWebUIStatus of the most recent command to load
the auxilliary web User Interface pages.
Possible values:
0 = Operation completed successfully (or
has not taken place).
2 = File not found on the file server.
12 = Insufficient memory to load all
files.
20 = Identifier encountered while decoding
is an ordinary file,
not a directory.
22 = No file specified, or invalid file
format.
35 = File format is not supported.
68 = Operation is still in progress. Poll
again later.
72 = Operation was started, but later was
canceled.ro INTEGER .1.3.6.1.4.1.522.3.8.5 |
awcHttpdPortIP port number over which to perform HTTP
operations.rw INTEGER .1.3.6.1.4.1.522.3.8.6 |
awcConsoleAutoApplyThe current state of 'auto apply' mode on the
console browser.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.8.7 |
awcDnsRes OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.9 |
resolverDomainThe name of the resolver domain currently in
use by the system. Max. string length of 128
octets.ro DisplayString .1.3.6.1.4.1.522.3.9.1 |
resolverDomainSuffixThe suffix name of the resolver domain. Used
to abbreviate displayed host names.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.9.2 |
resolverDomainServerTableTable of DNS Name Servers currently in use by
the system. SEQUENCE OF ResolverDomainServerEntry .1.3.6.1.4.1.522.3.9.3 |
resolverDomainServerEntryAn entry in resolverDomainServerTable. ResolverDomainServerEntry .1.3.6.1.4.1.522.3.9.3.1 |
resolverDomainServerPriorityThe priority order in which a domain name
server is queried.ro INTEGER .1.3.6.1.4.1.522.3.9.3.1.1 |
resolverDomainServerThe IP Address of a domain name server
currently in use by the system.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.9.3.1.2 |
defaultResolverDomainThe name of the resolver domain to be used by
the system unless overridden by a BOOTP or
DHCP server. Max. string length of 128
octets.rw DisplayString .1.3.6.1.4.1.522.3.9.4 |
defaultResolverDomainServerTableTable of DNS Name Servers to be used by the
system unless overridden by a BOOTP or DHCP
server. SEQUENCE OF DefaultResolverDomainServerEntry .1.3.6.1.4.1.522.3.9.5 |
defaultResolverDomainServerEntryAn entry in defaultResolverDomainServerTable. DefaultResolverDomainServerEntry .1.3.6.1.4.1.522.3.9.5.1 |
defaultResolverDomainServerPriorityThe priority order in which a domain name
server is queried.ro INTEGER .1.3.6.1.4.1.522.3.9.5.1.1 |
defaultResolverDomainServerThe IP Address of a domain name server to be
used by the system unless overridden by a
BOOTP or DHCP server.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.9.5.1.2 |
awcSnmp OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.10 |
snmpTrapDestThe destination of an SNMP trap. This may be
any DNS-recognizable IP address. Max. string
length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.10.1 |
snmpTrapCommunityThe community name of the trap.
Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.10.2 |
awcSntp OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.11 |
defaultSntpServerThe name of the SNTP server to be use by the
system, unless overridden by a BOOTP or DHCP
server. Max. string length is 128 octets.rw DisplayString .1.3.6.1.4.1.522.3.11.1 |
sntpServerThe name of the SNTP server currently in use
by the system. Max. string length is 128
octets.ro DisplayString .1.3.6.1.4.1.522.3.11.2 |
awcForwardTbl OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.12 |
awcFtStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.12.1 |
awcFtMcastAddrCount of multicast addresses observed by the
system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.1 |
awcFtDsHostCount of DS (infrastructure) host addresses
observed by the system over its own DS network
interface (Ethernet).ro INTEGER .1.3.6.1.4.1.522.3.12.1.3 |
awcFtBridgeHostCount of DS (infrastructure) host addresses
observed by the system on the remote side of
a bridge.ro INTEGER .1.3.6.1.4.1.522.3.12.1.5 |
awcFtClientSTACount of Client Station addresses observed by
the system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.7 |
awcFtClientSTASelfCount of Client Stations which are Associated
to the system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.8 |
awcFtBridgeCount of non-root Bridge addresses observed by
the system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.9 |
awcFtBridgeSelfCount of non-root Bridges which are Associated
to the system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.10 |
awcFtRepeaterCount of Repeater addresses observed by the
system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.11 |
awcFtRepeaterSelfCount of Repeater devices which are Associated
to the system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.12 |
awcFtAccessPointCount of Access Point addresses observed by
the system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.13 |
awcFtBridgeRootCount of Root Bridge addresses observed by
the system.ro INTEGER .1.3.6.1.4.1.522.3.12.1.15 |
awcFtConfig OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.12.2 |
awcFtMaxNumEntriesThe maximum number of entries in the
forwarding table. Must be a power of 2 from
1024 to 65536. The number of entries controls
the size of the forwarding table and the hash
algorithm used by the forwarding table.
Changing the number of entries requires a
system reboot.rw INTEGER .1.3.6.1.4.1.522.3.12.2.1 |
awcFtTimeoutSecUnknownThe default number of seconds an Entry with
awcTpFdbClassID=unknown will remain in the
Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.2 |
awcFtTimeoutSecMcastAddrThe default number of seconds an Entry with
awcTpFdbClassID=multicast will remain in the
Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.3 |
awcFtTimeoutSecDsHostThe default number of seconds an Entry with
awcTpFdbClassID=dsHost will remain in the
Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.4 |
awcFtTimeoutSecBridgeHostThe default number of seconds an Entry with
awcTpFdbClassID=bridgeHost will remain in the
Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.5 |
awcFtTimeoutSecClientSTAThe default number of seconds an Entry with
awcTpFdbClassID=clientStation will remain in
the Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.6 |
awcFtTimeoutSecBridgeThe default number of seconds an Entry with
awcTpFdbClassID=bridge will remain in the
Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.7 |
awcFtTimeoutSecRepeaterThe default number of seconds an Entry with
awcTpFdbClassID=repeater will remain in the
Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.8 |
awcFtTimeoutSecAccessPointThe default number of seconds an Entry with
awcTpFdbClassID=accessPoint will remain in the
Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.9 |
awcFtTimeoutSecBridgeRootThe default number of seconds an Entry with
awcTpFdbClassID=bridgeRoot will remain in the
Forwarding Table before being staled-out.rw Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.2.10 |
awcFtEnableAwcTpFdbTableIf true, the system will populate the
awcTpFdbEntry MIB for all forwarding table
entries. This improves management statistics.
If false, the system will not populate the
awcTpFdbEntry MIB for any forwarding table
entries. This improves speed and memory
utilization.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.12.2.11 |
awcFtEnableMacAuthServerIf true, the system will contact a AAA server
for retrieving dot1dStaticTable information
for new forwarding table entries if a
dot1dStaticTable entry does not already exist
for the host address.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.12.2.12 |
awcFtRogueApAlertTimeoutThe minimum number of minutes after a Possible
Rogue status is reported about a device before
another Possible Rogue status report is
issued by this system about the same device.rw INTEGER .1.3.6.1.4.1.522.3.12.2.13 |
awcFtEnableMacOrEapAuthIf true, the system grants full access to those
clients which have successfully completed either
MAC or EAP authentication.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.12.2.14 |
awcFtDot1dTpFdbTableEnableIf true, the system will populate the
dot1dTpFdbEntry MIB for all forwarding table
entries. This improves management statistics.
If false, the system will not populate the
dot1dTpFdbEntry MIB for any forwarding table
entries. This improves speed and memory
utilization.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.12.2.15 |
awcTpFdbTableA table that contains information about
entries for which the bridge has forwarding
and/or filtering information. This information
is used by the transparent bridging function
for maintaining statistics about each entry. SEQUENCE OF AwcTpFdbEntry .1.3.6.1.4.1.522.3.12.3 |
awcTpFdbEntryInformation about a specific MAC address
for which the bridge has some forwarding and/or
filtering information. AwcTpFdbEntry .1.3.6.1.4.1.522.3.12.3.1 |
awcTpFdbAddressA MAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.12.3.1.1 |
awcTpFdbClassIDObserved general 802.11 classification of the
entry.ro AwcTpFdbClassID -- Rsyntax INTEGER { -- unknown(1), -- multicast(2), -- dsHost(3), -- bridgeHost(4), -- clientStation(5), -- bridge(6), -- repeater(7), -- accessPoint(8), -- bridgeRoot(9) -- } .1.3.6.1.4.1.522.3.12.3.1.2 |
awcTpFdbSrcPktsImmedNumber of observed packets for which this entry was the
source.ro Counter .1.3.6.1.4.1.522.3.12.3.1.3 |
awcTpFdbSrcOctetsImmedNumber of observed octets for which this entry was the
source.ro Counter .1.3.6.1.4.1.522.3.12.3.1.4 |
awcTpFdbSrcErrorPktsImmedNumber of observed error packets for which this entry was
the source.ro Counter .1.3.6.1.4.1.522.3.12.3.1.5 |
awcTpFdbSrcErrorOctetsImmedNumber of observed error octets for which this entry was
the source.ro Counter .1.3.6.1.4.1.522.3.12.3.1.6 |
awcTpFdbDestPktsImmedNumber of observed packets for which this entry was the
destination.ro Counter .1.3.6.1.4.1.522.3.12.3.1.7 |
awcTpFdbDestOctetsImmedNumber of observed octets for which this entry was the
destination.ro Counter .1.3.6.1.4.1.522.3.12.3.1.8 |
awcTpFdbDestErrorPktsImmedNumber of observed error packets for which this entry was
the destination. This count includes
awcTpFdbDestMaxRetryErrorsImmed.ro Counter .1.3.6.1.4.1.522.3.12.3.1.9 |
awcTpFdbDestErrorOctetsImmedNumber of observed error octets for which this entry was
the destination.ro Counter .1.3.6.1.4.1.522.3.12.3.1.10 |
awcTpFdbDestMaxRetryErrorsImmedNumber of observed max-retry error packets for which this
entry was the destination.ro Counter .1.3.6.1.4.1.522.3.12.3.1.11 |
awcTpFdbIPv4AddrObserved IPv4 network address of the entry.ro IpAddress .1.3.6.1.4.1.522.3.12.3.1.16 |
awcTpFdbDdpTableA table that contains information about
entries for which the bridge has forwarding
and/or filtering information. This table
maintains only Aironet-specific information
about each entry. SEQUENCE OF AwcTpFdbDdpEntry .1.3.6.1.4.1.522.3.12.4 |
awcTpFdbDdpEntryInformation about a specific MAC address
for which the bridge has some forwarding and/or
filtering information. AwcTpFdbDdpEntry .1.3.6.1.4.1.522.3.12.4.1 |
awcTpFdbDdpAddressA MAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.12.4.1.1 |
awcTpFdbDdpSysNameThe Aironet DDP System Name of the entry.ro DisplayString .1.3.6.1.4.1.522.3.12.4.1.2 |
awcTpFdbDdpProdDevIDThe Aironet DDP Product Device ID of the entry.ro AwcDdpProdDevID -- Rsyntax INTEGER { -- tokenRingAP(74), -- ethernetAP(76), -- ethernetBridge(77), -- tokenRingBridge(78), -- pc3000Client(84), -- serialUC(85), -- ethernetUC(86), -- pc3500Client(101), -- pc4500Client(102), -- generic80211Client(104), -- pc4800Client(109), -- pc3100Client(110), -- mc(111), -- ethernetClient(112), -- pc2500Client(113), -- pc4800bClient(117), -- euc(120), -- homeAP(121), -- eucNoDiversity(122), -- emcNoDiversity(123), -- emc(124), -- series350Client(127), -- series370Client(128), -- multicast(240), -- unknown(241), -- tokenRingHost(253), -- ethernetHost(255) -- } .1.3.6.1.4.1.522.3.12.4.1.3 |
awcTpFdbDdpRadioDevIDThe Aironet DDP Radio Device ID of the entry.ro AwcDdpRadioDevID -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- tma900(1), -- tma2400(2), -- pc3500(3), -- pc3000(4), -- tma2040(5), -- pc4500(6), -- pc4800(12), -- pc3100(13), -- series350(34), -- series370(35) -- } .1.3.6.1.4.1.522.3.12.4.1.4 |
awcTpFdbDdpSwVerMajorThe Aironet DDP Major Software Version Number of
the entry. If unknown, the value 0 is returned.ro INTEGER .1.3.6.1.4.1.522.3.12.4.1.5 |
awcTpFdbDdpSwVerMinorThe Aironet DDP Minor Software Version Number of
the entry.ro INTEGER .1.3.6.1.4.1.522.3.12.4.1.6 |
awcTpFdbDdpSwVerBetaThe Aironet DDP Beta Software Version Number of
the entry. This number is always 0 for
officially-released software.ro INTEGER .1.3.6.1.4.1.522.3.12.4.1.7 |
awcTpFdbDdpUptimeThe time in seconds that the entry has been
operational.ro Gauge -- Units -- seconds .1.3.6.1.4.1.522.3.12.4.1.8 |
awcTpFdbDdpNumAnnounceSentThe number of times the entry itself believes
that it has issued some form of Aironet DDP
Presense Announcement. If this field decreases,
the entry has probably been reset.ro Gauge .1.3.6.1.4.1.522.3.12.4.1.9 |
awcTpFdbDdpNumAssociatedThe number of Stations currently Associated
with the entry.ro INTEGER .1.3.6.1.4.1.522.3.12.4.1.10 |
awcTpFdbDdpLoadAn approximation of the percentage of offered
vs. theoretically-available load on the host's
radio interface.ro INTEGER .1.3.6.1.4.1.522.3.12.4.1.11 |
awcTpFdbDdpDistFromDSThe Bridging Distance or Number of Hops between
the entry and the backbone Distribution System
(DS). If 0, the entry is directly connected to
the DS.ro INTEGER .1.3.6.1.4.1.522.3.12.4.1.12 |
awcDot11TpFdbTableA table that contains information about
entries for which the bridge has forwarding
and/or filtering information. This table
maintains only 802.11-specific information
about each entry. SEQUENCE OF AwcDot11TpFdbEntry .1.3.6.1.4.1.522.3.12.5 |
awcDot11TpFdbEntryInformation about a specific MAC address
for which the bridge has some forwarding and/or
filtering information. AwcDot11TpFdbEntry .1.3.6.1.4.1.522.3.12.5.1 |
awcDot11TpFdbAddressA MAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.12.5.1.1 |
awcDot11TpFdbAIDAID with which the Station is associated with this
system, or 2008 if the
Station is not currently known to be associated. If the
entry is multicast, awcDot11TpFdbAID is 0. Note that
the uplink from a Client or Repeater AP to its parent
is always AID 1.ro Gauge .1.3.6.1.4.1.522.3.12.5.1.2 |
awcDot11TpFdbClientState802.11 Service State of the Station.ro AwcDot11ClientState -- Rsyntax INTEGER { -- state0(1), -- state1(2), -- state2(3), -- state3(4) -- } .1.3.6.1.4.1.522.3.12.5.1.3 |
awcDot11TpFdbTxShortRetriesThe total number of 802.11 Short Retries incurred across
all packet Transmission Attempts to this Station.ro Counter .1.3.6.1.4.1.522.3.12.5.1.4 |
awcDot11TpFdbTxLongRetriesThe total number of 802.11 Long Retries incurred across
all packet Transmission Attempts to this Station.ro Counter .1.3.6.1.4.1.522.3.12.5.1.5 |
awcDot11TpFdbLatestTxShortRetriesThe number of 802.11 Short Retries incurred during the
most recent packet Transmission Attempts to this Station.ro Counter .1.3.6.1.4.1.522.3.12.5.1.6 |
awcDot11TpFdbLatestTxLongRetriesThe number of 802.11 Long Retries incurred during the
most recent packet Transmission Attempts to this Station.ro Counter .1.3.6.1.4.1.522.3.12.5.1.7 |
awcDot11TpFdbRxWEPErrorsThe total number of packets received from this Station
which failed to be properly decrypted via the WEP security
mechanism.ro Counter .1.3.6.1.4.1.522.3.12.5.1.8 |
awcDot11TpFdbLatestRxSignalStrengthA device-dependent measure of the signal strength of the
most recently received packet from this Station. Might be
normalized or unnormalized.ro Gauge .1.3.6.1.4.1.522.3.12.5.1.9 |
awcDot11TpFdbLatestRxSignalQualityA device-dependent measure of the signal quality of the
most recently received packet from this Station.ro Gauge .1.3.6.1.4.1.522.3.12.5.1.10 |
awcDot11TpFdbCapabilitiesThe possible 802.11 capabilities of the Station's radio.ro Gauge .1.3.6.1.4.1.522.3.12.5.1.11 |
awcDot11TpFdbListenIntervalThe number of beacon intervals across which a the Station
will sleep in power-save mode, or 1 if the
Station will never be in power-save mode.ro Gauge .1.3.6.1.4.1.522.3.12.5.1.12 |
awcDot11TpFdbSupportedDataRatesThis attribute shall specify the set of data rates
at which the station may transmit data. Each octet
contains a value representing a rate. Each rate
shall be within the range from 2 to 255, the lower
seven bits 0..6 of which corresponding to data rates
in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s,
and shall be supported (as indicated in the supported
rates table) for receiving data. This value is
reported in transmitted Beacon, Probe Request, Probe
Response, Association Request, Association Response,
Reassociation Request, and Reassociation Response
frames, and is used to determine whether a BSS
with which the station desires to synchronize is
suitable. If set, Bit 7 of the rate specification
indicates that rate is a member of the Basic Rate Set
of the access point.ro OCTET STRING .1.3.6.1.4.1.522.3.12.5.1.13 |
awcDot11TpFdbPreferredTxRateThe transmission rate at which a packet should
currently be transmitted from an AP to this Station.
This rate does not carry information about whether or
not the rate is in the Basic Rate Set (i.e. bit 0x80
is never set).ro Gauge .1.3.6.1.4.1.522.3.12.5.1.14 |
awcDot11TpFdbCurrentBSSBSS to which the station is currently Associated, or
00:00:00:00:00:00 if the station's current AP is
unknown.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.12.5.1.15 |
awcDot11TpFdbSSIDIf the Station is Associated to this AP, the SSID via
which the Station Associated. If 0, the Station
Associated via dot11DesiredSSID. If greater than 0,
the Station Associated through the auxiliary SSID with
awcDot11AuxSSIDIndex equal to awcDot11TpFdbSSID.
If -1, the Station is not currently Associated to
this AP.ro INTEGER(-1..2007) .1.3.6.1.4.1.522.3.12.5.1.16 |
awcDot11TpFdbVlanIdNumeric ID of the VLAN over which the Station is
communicating. If 0, the Station is not known to be
communicating over any specific VLAN.ro AwcVlanId -- Rsyntax INTEGER .1.3.6.1.4.1.522.3.12.5.1.17 |
awcDot1dTpPortTableA table that contains information about every
port that is associated with this transparent
bridge. This table contains information about
host and protocol filtering for the port.
Each entry represents a transparent bridge port
on the device.
Entries in this table cannot be created or
deleted by the network management system.
All entries are created or deleted by the
agent. SEQUENCE OF AwcDot1dTpPortEntry .1.3.6.1.4.1.522.3.12.6 |
awcDot1dTpPortEntryA list of filtering information for each port of a
transparent bridge. This information includes
packet forwarding permission for unicast and
non-unicast frames and filters ID used for
the filtering. AwcDot1dTpPortEntry .1.3.6.1.4.1.522.3.12.6.1 |
awcDot1dTpPortDefaultUcastAllowedToGoToThe set of ports to which frames received from a
specific port and destined for a unicast MAC address
which is not already listed in dot1dStaticTable are
allowed to be forwarded. Each octet
within the value of this object specifies a set of
eight ports, with the first octet specifying ports
1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of ones of appropriate
length.rw OCTET STRING .1.3.6.1.4.1.522.3.12.6.1.1 |
awcDot1dTpPortDefaultNUcastAllowedToGoToThe set of ports to which frames received from a
specific port and destined for a multicast MAC address
which is not already listed in dot1dStaticTable are
allowed to be forwarded. Each octet
within the value of this object specifies a set of
eight ports, with the first octet specifying ports
1 through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents the
highest numbered port. Thus, each port of the
bridge is represented by a single bit within the
value of this object. If that bit has a value of
'1' then that port is included in the set of
ports; the port is not included if its bit has a
value of '0'. (Note that the setting of the bit
corresponding to the port from which a frame is
received is irrelevant.) The default value of
this object is a string of ones of appropriate
length.rw OCTET STRING .1.3.6.1.4.1.522.3.12.6.1.2 |
awcDot1dTpPortMaxNUcastPerSecondThe maximum number of multicast packets
allowed to be forwarded over the port each
second. If 0, the number of multicasts
is unlimited.rw Gauge .1.3.6.1.4.1.522.3.12.6.1.3 |
awcDot1dTpPortDefaultInEthertypeFilterIdawcPfEtSetId of the Ethertype Filter Set to
apply to packets received over this port.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.12.6.1.4 |
awcDot1dTpPortDefaultOutEthertypeFilterIdawcPfEtSetId of the Ethertype Filter Set to
apply to packets transmitted over this port.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.12.6.1.5 |
awcDot1dTpPortDefaultInIpProtoFilterIdawcPfIppSetId of the IP Protocol Filter Set to
apply to packets received over this port.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.12.6.1.6 |
awcDot1dTpPortDefaultOutIpProtoFilterIdawcPfIppSetId of the IP Protocol Filter Set to
apply to packets transmitted over this port.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.12.6.1.7 |
awcDot1dTpPortDefaultInIpPortFilterIdawcPfIptSetId of the IP Port Filter Set to
apply to packets received over this port.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.12.6.1.8 |
awcDot1dTpPortDefaultOutIpPortFilterIdawcPfIptSetId of the IP Port Filter Set to
apply to packets transmitted over this port.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.12.6.1.9 |
awcTpFdbAlertTableA table that contains information about
entries for which the bridge has forwarding
and/or filtering information. This table
maintains only packet-trace alert statistics.
Each entry is indexed by a MAC address
in the packet forwarding.
Entries in this table cannot be created or
deleted by the network management system.
All entries are created or deleted by the
agent. SEQUENCE OF AwcTpFdbAlertEntry .1.3.6.1.4.1.522.3.12.7 |
awcTpFdbAlertEntryInformation about a specific MAC address
for which the bridge has some forwarding and/or
filtering information. AwcTpFdbAlertEntry .1.3.6.1.4.1.522.3.12.7.1 |
awcTpFdbAlertAddressA MAC address for which the bridge has
forwarding and/or filtering information.ro MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.12.7.1.1 |
awcTpFdbFromAlertSrcPktsImmedThe total number of packets directed to this entry,
over any interface, from a source host
designated Alert From in the forwarding table.ro Counter .1.3.6.1.4.1.522.3.12.7.1.2 |
awcTpFdbFromAlertSrcOctetsImmedThe total number of octets directed to this entry,
over any interface, from a source host
designated Alert From in the forwarding table.ro Counter .1.3.6.1.4.1.522.3.12.7.1.3 |
awcTpFdbToAlertDestPktsImmedThe total number of packets sent by this entry,
over any interface, to a destination MAC address
designated Alert To in the forwarding table.ro Counter .1.3.6.1.4.1.522.3.12.7.1.4 |
awcTpFdbToAlertDestOctetsImmedThe total number of packets sent by this entry,
over any interface, to a destination MAC address
designated Alert To in the forwarding table.ro Counter .1.3.6.1.4.1.522.3.12.7.1.5 |
awcTpFdbAlertSentAlertTypePktsImmedThe total number of packets sent by this entry,
over any interface, with a packet type
designated Alert in an applicable protocol filter.ro Counter .1.3.6.1.4.1.522.3.12.7.1.6 |
awcTpFdbAlertSentAlertTypeOctetsImmedThe total number of octets sent by this entry,
over any interface, with a packet type
designated Alert in an applicable protocol filter.ro Counter .1.3.6.1.4.1.522.3.12.7.1.7 |
awcTpFdbAlertRcvdAlertTypePktsImmedThe total number of packets directed to this entry,
over any interface, with a packet type
designated Alert in an applicable protocol filter.ro Counter .1.3.6.1.4.1.522.3.12.7.1.8 |
awcTpFdbAlertRcvdAlertTypeOctetsImmedThe total number of octets directed to this entry,
over any interface, with a packet type
designated Alert in an applicable protocol filter.ro Counter .1.3.6.1.4.1.522.3.12.7.1.9 |
awcRipConfig OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.13 |
awcEventLog OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.14 |
awcEventOffsetGMTThe current offset from GMT in minutes.rw INTEGER(-720..720) -- Units -- minutes .1.3.6.1.4.1.522.3.14.1 |
awcEventUseDaylightSavingsTimeIf true, daylight savings time is used.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.14.2 |
awcEventTimestampGMTGMT Time, in seconds since January 1, 1970,
when the system wall-clock time was last set.rw INTEGER -- Units -- seconds .1.3.6.1.4.1.522.3.14.3 |
awcEventUptimeModifiedGMTSystem uptime, in seconds, when the system
wall-clock time was last set.ro INTEGER -- Units -- seconds .1.3.6.1.4.1.522.3.14.4 |
awcEventDisplayWallClockTimeIf true, time display on the system's web
pages and console is in wall-clock time.
If false, time display is in system uptime.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.14.5 |
awcEventDisplayUptimeAscendingIf true, time display in system uptime is
measured from the time the system boots,
forward. If false, time display in
measured from the current time backwards.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.14.6 |
awcEventDetailDefaultDetail level at which, by default, events
are displayed. General detail level
classifications are:
8 - no display at all
16 - sparse detail
24 - normal detail
32 - verbose detail
40 - exhaustive detailrw INTEGER .1.3.6.1.4.1.522.3.14.7 |
awcEventSeverityDispConsoleIf an event has a severity level greater than
or equal to awcEventSeverityDispConsole, it
is displayed on the console shortly after it
occurs.rw AwcEventSeverity -- Rsyntax INTEGER { -- systemFatal(2), -- protocolFatal(3), -- portFatal(4), -- systemAlert(5), -- protocolAlert(6), -- portAlert(7), -- externalAlert(8), -- systemWarning(9), -- protocolWarning(10), -- portWarning(11), -- externalWarning(12), -- systemInfo(13), -- protocolInfo(14), -- portInfo(15), -- externalInfo(16) -- } .1.3.6.1.4.1.522.3.14.8 |
awcEventSeverityDispHtmlGUIIf an event has a severity level greater than
or equal to awcEventSeverityDispHtmlGUI, it
is displayed on the the Event Log GUI web
pages.rw AwcEventSeverity -- Rsyntax INTEGER { -- systemFatal(2), -- protocolFatal(3), -- portFatal(4), -- systemAlert(5), -- protocolAlert(6), -- portAlert(7), -- externalAlert(8), -- systemWarning(9), -- protocolWarning(10), -- portWarning(11), -- externalWarning(12), -- systemInfo(13), -- protocolInfo(14), -- portInfo(15), -- externalInfo(16) -- } .1.3.6.1.4.1.522.3.14.9 |
awcEventSeverityDispHtmlConsoleIf an event has a severity level greater than
or equal to awcEventSeverityDispHtmlConsole,
it is displayed on the the Event Log console
browser pages.rw AwcEventSeverity -- Rsyntax INTEGER { -- systemFatal(2), -- protocolFatal(3), -- portFatal(4), -- systemAlert(5), -- protocolAlert(6), -- portAlert(7), -- externalAlert(8), -- systemWarning(9), -- protocolWarning(10), -- portWarning(11), -- externalWarning(12), -- systemInfo(13), -- protocolInfo(14), -- portInfo(15), -- externalInfo(16) -- } .1.3.6.1.4.1.522.3.14.10 |
awcEventAlertSNMPIf true, events of a severity with Disposition
set to notify will generate an SNMP trap.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.14.11 |
awcEventAlertSyslogIf true, events of a severity with Disposition
set to notify will generate a sysLog message.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.14.12 |
awcEventStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.14.14 |
awcEventCntSeverityNULLNULL message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.1 |
awcEventCntSeveritySilentSilent message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.2 |
awcEventCntSeveritySystemFatalFatal system message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.3 |
awcEventCntSeverityProtocolFatalFatal Protocol message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.4 |
awcEventCntSeverityPortFatalFatal Port message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.5 |
awcEventCntSeveritySystemAlertSystem Alert message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.6 |
awcEventCntSeverityProtocolAlertProtocol Alert message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.7 |
awcEventCntSeverityPortAlertPort Alert message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.8 |
awcEventCntSeverityExternalAlertExternal Alert message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.9 |
awcEventCntSeveritySystemWarningSystem Warning message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.10 |
awcEventCntSeverityProtocolWarningProtocol Warning message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.11 |
awcEventCntSeverityPortWarningPort Warning message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.12 |
awcEventCntSeverityExternalWarningExternal Warning message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.13 |
awcEventCntSeveritySystemInfoSystem Info message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.14 |
awcEventCntSeverityProtocolInfoProtocol Info message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.15 |
awcEventCntSeverityPortInfoPort Info message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.16 |
awcEventCntSeverityExternalInfoExternal Info message counter.ro Counter .1.3.6.1.4.1.522.3.14.14.17 |
awcEventDisposition OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.14.15 |
awcEventDispSeverityNULLNULL message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.1 |
awcEventDispSeveritySilentSilent message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.2 |
awcEventDispSeveritySystemFatalFatal system message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.3 |
awcEventDispSeverityProtocolFatalFatal Protocol message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.4 |
awcEventDispSeverityPortFatalFatal Port message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.5 |
awcEventDispSeveritySystemAlertSystem Alert message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.6 |
awcEventDispSeverityProtocolAlertProtocol Alert message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.7 |
awcEventDispSeverityPortAlertPort Alert message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.8 |
awcEventDispSeverityExternalAlertExternal Alert message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.9 |
awcEventDispSeveritySystemWarningSystem Warning message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.10 |
awcEventDispSeverityProtocolWarningProtocol Warning message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.11 |
awcEventDispSeverityPortWarningPort Warning message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.12 |
awcEventDispSeverityExternalWarningExternal Warning message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.13 |
awcEventDispSeveritySystemInfoSystem Info message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.14 |
awcEventDispSeverityProtocolInfoProtocol Info message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.15 |
awcEventDispSeverityPortInfoPort Info message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.16 |
awcEventDispSeverityExternalInfoExternal Info message disposition.rw AwcEventDisposition -- Rsyntax INTEGER { -- count(1), -- displayConsole(2), -- record(3), -- notify(4) -- } .1.3.6.1.4.1.522.3.14.15.17 |
awcEventSyslogAddrThe destination of a sysLog message.
This address must be numeric or DNS
resolvable. Max. string length is
128 octets.rw DisplayString .1.3.6.1.4.1.522.3.14.16 |
awcEventSyslogFacilityThe facility number encoded within a sysLog
message.rw INTEGER .1.3.6.1.4.1.522.3.14.17 |
awcEventTraceStationSeveritySeverity at which all Detailed Packet Trace events
shall be handled.rw AwcEventSeverity -- Rsyntax INTEGER { -- systemFatal(2), -- protocolFatal(3), -- portFatal(4), -- systemAlert(5), -- protocolAlert(6), -- portAlert(7), -- externalAlert(8), -- systemWarning(9), -- protocolWarning(10), -- portWarning(11), -- externalWarning(12), -- systemInfo(13), -- protocolInfo(14), -- portInfo(15), -- externalInfo(16) -- } .1.3.6.1.4.1.522.3.14.20 |
awcEventTraceLogSizeSize in octets of the system Detailed Event Trace
Buffer. Note that this buffer is statically
allocated at system initialization time. Changing
the size of the buffer requires a system reboot.rw Gauge .1.3.6.1.4.1.522.3.14.21 |
awcEventTracePacketLenMaximum size in octets of each Packet Trace Event
recorded in the Detailed Event Trace Buffer.rw Gauge .1.3.6.1.4.1.522.3.14.22 |
awcEventTableSNMP access to Event Log table. SEQUENCE OF AwcEventEntry .1.3.6.1.4.1.522.3.14.23 |
awcEventEntryAn entry in awcEventTable. AwcEventEntry .1.3.6.1.4.1.522.3.14.23.1 |
awcEventIDSystem-unique identifier of the event.ro Gauge .1.3.6.1.4.1.522.3.14.23.1.1 |
awcEventTimeSystem time at which the event occurred.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.14.23.1.2 |
awcEventSeveritySeverity of the event.ro AwcEventSeverity -- Rsyntax INTEGER { -- systemFatal(2), -- protocolFatal(3), -- portFatal(4), -- systemAlert(5), -- protocolAlert(6), -- portAlert(7), -- externalAlert(8), -- systemWarning(9), -- protocolWarning(10), -- portWarning(11), -- externalWarning(12), -- systemInfo(13), -- protocolInfo(14), -- portInfo(15), -- externalInfo(16) -- } .1.3.6.1.4.1.522.3.14.23.1.3 |
awcEventDescriptionDetailed description of the event.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.14.23.1.4 |
awcEventTypeSpecific type of the event. The type is unique for
each test condition which can result in event
generation.ro DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.14.23.1.5 |
awcEventUseCiscoFormatIf true, the system will generate
syslog messages using Cisco standard EMBLEM-
compliant format. If false, syslog will use
legacy Aironet format.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.14.25 |
awcDot11AuthenticateFailDispositionSpecifies how standard IEEE trap dot11AuthenticateFail
is handled on the system.rw AwcDot11EventDisposition -- Rsyntax INTEGER { -- noNotification(1), -- eventLogOnly(2), -- ieeeTrapOnly(3), -- eventLogAndIeeeTrap(4) -- } .1.3.6.1.4.1.522.3.14.26 |
awcDot11DeauthenticateDispositionSpecifies how standard IEEE 802.11 trap dot11Deauthenticate
is handled on the system.rw AwcDot11EventDisposition -- Rsyntax INTEGER { -- noNotification(1), -- eventLogOnly(2), -- ieeeTrapOnly(3), -- eventLogAndIeeeTrap(4) -- } .1.3.6.1.4.1.522.3.14.27 |
awcDot11DisassociateDispositionSpecifies how standard IEEE 802.11 trap dot11Disassociate
is handled on the system.rw AwcDot11EventDisposition -- Rsyntax INTEGER { -- noNotification(1), -- eventLogOnly(2), -- ieeeTrapOnly(3), -- eventLogAndIeeeTrap(4) -- } .1.3.6.1.4.1.522.3.14.28 |
awcEtherMIB OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.15 |
awcEtherIfSpeedSelectRequested Ethernet interface speed and
duplex.rw Enumeration .1.3.6.1.4.1.522.3.15.1 |
awcEtherDuplexActual Ethernet interface duplex, after any
line negotiation has taken place.ro Enumeration .1.3.6.1.4.1.522.3.15.5 |
awcEtherCamSizeNumber of entries in the hardware Content Addressible
Memory MAC address filter available to the Ethernet
controller.ro Gauge .1.3.6.1.4.1.522.3.15.7 |
awcEtherEnableSwCamIf true, the Ethernet driver makes use of a Software
Content Addressible Memory when making packet-forwarding
decisions. When true, forwarding decisions are much
faster, but network statistics collection is much
coarser. If false, all packet-forwarding decisions are
made by the higher-level packet-bridging logic.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.15.8 |
awcEtherForcePortUnblockIf true, the Ethernet port has dot1dStpPortState forced
to forwarding even when the Spanning Tree Protocol is
not enabled. This provides rapid port re-establishment
at the potential cost of not detecting network topology
loops involving the Ethernet and other network interfaces
such as the radio. If false, the Ethernet port is blocked
whenever there exists the potential for a network topology
loop and the Spanning Tree Protocol is not enabled to guard
against such loops.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.15.9 |
awcEtherLostEthernetSecondsNumber of seconds the system must detect loss of backbone
connectivity (i.e. loss of Ethernet link and no active
trunks available on any of the radios) before taking the
action specified by awcEtherLostEthernetAction.rw INTEGER .1.3.6.1.4.1.522.3.15.10 |
awcEtherLostEthernetActionAction taken by the system when a loss of backbone
connectivity condition occurs for a period of time
longer than awcEtherLostEthernetSeconds.rw Enumeration .1.3.6.1.4.1.522.3.15.11 |
awcEtherLostEthernetSSIDThe single SSID index required by the system if
awcEtherLostEthernetAction is restrictSSID and backbone
connectivity is lost for a period of time longer than
awcEtherLostEthernetSeconds. If 0, only Association to
dot11DesiredSSID is allowed. If non-0, only
Association to the auxiliary SSID with the corresponding
awcDot11AuxSSIDIndex is allowed.rw Gauge .1.3.6.1.4.1.522.3.15.12 |
awcPolicyGroups OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.16 |
awcPolGrpTableTable of named groups of related protocol filters SEQUENCE OF AwcPolGrpEntry .1.3.6.1.4.1.522.3.16.1 |
awcPolGrpEntryAn entry in awcPolGrpTable. AwcPolGrpEntry .1.3.6.1.4.1.522.3.16.1.1 |
awcPolGrpIdNumeric identifier of the Policy Group. Gauge .1.3.6.1.4.1.522.3.16.1.1.1 |
awcPolGrpNameDescriptive name of the Policy Group.
Max. string length is 64 octets.rw DisplayString .1.3.6.1.4.1.522.3.16.1.1.2 |
awcPolGrpStatusRow status of the entire Policy Group.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.16.1.1.3 |
awcPolGrpInEthertypeFilterIdawcPfEtSetId of the Ethertype Filter Set to
apply to packets received subject to this policy.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.16.1.1.4 |
awcPolGrpOutEthertypeFilterIdawcPfEtSetId of the Ethertype Filter Set to
apply to packets transmitted subject to this policy.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.16.1.1.5 |
awcPolGrpInIpProtoFilterIdawcPfIppSetId of the IP Protocol Filter Set to
apply to packets received subject to this policy.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.16.1.1.6 |
awcPolGrpOutIpProtoFilterIdawcPfIppSetId of the IP Protocol Filter Set to
apply to packets transmitted subject to this policy.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.16.1.1.7 |
awcPolGrpInIpPortFilterIdawcPfIptSetId of the IP Port Filter Set to
apply to packets received subject to this policy.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.16.1.1.8 |
awcPolGrpOutIpPortFilterIdawcPfIptSetId of the IP Port Filter Set to
apply to packets transmitted subject to this policy.
If 0, no filters are applied.rw Gauge .1.3.6.1.4.1.522.3.16.1.1.9 |
awcDscpToCosMapEnableIf true, IP packets which are not already
classified with a non-default Class of Service
(CoS) can be classified by reference to their
Differentiated Services Code-Point (DSCP) value.
If false, unclassified IP packets are not subject
to DSCP classification.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.16.2 |
awcDscpToCosMapTableThis (conceptual) table to statically map
Differentiated Services Code-Point (DSCP)
values to corresponding Class of Service (CoS)
values. SEQUENCE OF AwcDscpToCosMapEntry .1.3.6.1.4.1.522.3.16.3 |
awcDscpToCosMapEntryAn Entry (conceptual row) in the Aironet DSCP To CoS
mapping table to statically map a Differentiated
Services Code-Point (DSCP) value to corresponding
Class of Service (CoS) value. AwcDscpToCosMapEntry .1.3.6.1.4.1.522.3.16.3.1 |
awcDscpToCosMapDscpThe auxiliary variable used to identify instances
of the columnar objects in the Aironet Differentiated
Services Code-Point (DSCP) to Class of Service (CoS)
Mapping Table. This variable directly corresponds to
a Differentiated Services Code-Point, plus 1. The
value may be used for marking a traffic stream. INTEGER .1.3.6.1.4.1.522.3.16.3.1.1 |
awcDscpToCosMapCosA value of Class of Service (CoS) mapped to
the DSCP value awcDscpToCosMapDscp. This object
corresponds directly to the 802.1D traffic category
ID, plus 1. The matching values are therefore in the
range 1 through 8. The value 0 indicates that no
matching CoS is configured for the corresponding
awcDscpToCosMapDscp.rw INTEGER .1.3.6.1.4.1.522.3.16.3.1.2 |
awcDdpIAPP OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.17 |
awcIappMcastIpAddrMulticast IP network address over which
applicable packets of the DDP and IAPP
protocols are exchanged between stations.
Default 224.0.1.40.rw IpAddress .1.3.6.1.4.1.522.3.17.1 |
awcIappPortIP port identifier through which applicable
packets of the DDP and IAPP protocols are
exchanged between stations.
Default 2887.rw INTEGER .1.3.6.1.4.1.522.3.17.2 |
awcP802dot1XVersionVersion of the 802.1X Protocol specification which
the AP will apply for incoming and outgoing EAPOL
traffic. Versions with 'd' designators are draft
specifications. The 802.1x-2001 standard is the
same as draft 10.rw Enumeration .1.3.6.1.4.1.522.3.17.100 |
awcHotStandby OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.18 |
awcHotStandbyMACAddrThe MAC address of the target unit which is
being monitored.rw MacAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.18.1 |
awcHotStandbyPollingFrequencyThe frequency (in seconds) that the monitored
target unit is being polled for testing its
health.rw INTEGER .1.3.6.1.4.1.522.3.18.2 |
awcHotStandbyPollingTimeOutThe total time (in seconds) that the monitoring
unit can tolerate the failure at polling the
monitored target unit. After this duration, one
more failure of the polling will trigger the
standby unit to take the role of monitored unit.rw INTEGER .1.3.6.1.4.1.522.3.18.3 |
awcHotStandbyInHotStandbyIf true, the current unit is in its monitoring
mode, i.e., if the unit is or will be a hot
standby device.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.18.4 |
awcHotStandbyStateThe current state, e.g., running, stopped, ... of the hotstandby.ro AwcHotStandbyState -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- running(0), -- initializing(1), -- stopped(2), -- notRunning(3) -- } .1.3.6.1.4.1.522.3.18.5 |
awcHotStandbyStatusThe current stateus, e.g., error, OK, ... of the hotstandby.ro AwcHotStandbyStatus -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- normal(0), -- initializing(1), -- takeover(2), -- stopped(3), -- associating(4), -- rootMacFailed(5), -- interfaceMerge(6), -- associationFail(7), -- etherTestFail(8), -- radioTestFail(9), -- error(10) -- } .1.3.6.1.4.1.522.3.18.6 |
awcAaa OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.19 |
awcAaaServerTableThis table provides information of AAA servers
currently available to this access point and
the parameters used to connect to the servers.
Each entry corresponds to an AAA server and is
indexed by the priority in which the server
should be used. AAA server of lowest priority
value should be used first. Entries in this
table cannot be created or deleted by the
network management system. All entries are
created or deleted by the agent. SEQUENCE OF AwcAaaServerEntry .1.3.6.1.4.1.522.3.19.1 |
awcAaaServerEntryAn entry provide the AAA server usage priority,
protocol, name, IP port, request timeout, and
authentication mechanisms supported. AwcAaaServerEntry .1.3.6.1.4.1.522.3.19.1.1 |
awcAaaServerPriorityThe priority of the server for when multiple servers
are configured for the same service. Lower priority
servers are used, in sequence, as backups.ro INTEGER .1.3.6.1.4.1.522.3.19.1.1.1 |
awcAaaServerProtocolThe protocol used to communicate with the AAA server.rw Enumeration .1.3.6.1.4.1.522.3.19.1.1.2 |
awcAaaServerNameThe DNS-resolvable name or numeric IP address of the
AAA server.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.19.1.1.3 |
awcAaaServerPortThe IP port number of the AAA server.rw Gauge .1.3.6.1.4.1.522.3.19.1.1.4 |
awcAaaServerTimeoutThe amount of time (in seconds) that an Access Point
should wait for a response from the AAA server
before retransmitting the request. If the Access Point
does not receive a response within the timeout
period, it retransmits the request. If no response is
received for a maximum of awcAaaServerMaxRetransmission
retransmissions, the server is considered not reachable
and a secondary server (if any) will be chosen.
If the AP and the AAA server are connected through a
low-speed network and the awcAaaServerTimeout value is set
to too low, the network may become congested, as the AP
retransmits unacknowledged requests that have not yet
reached the serverrw Gauge .1.3.6.1.4.1.522.3.19.1.1.5 |
awcAaaClientNameThe name the Access Point uses to identify itself when
acting as the supplicant.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.19.1.1.6 |
awcAaaServerSharedSecretThe textual string shared between the AAA server and
the access point, used to authenticate the messages
delivered between them.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.19.1.1.7 |
awcAaaServer8021xCapabilityEnabledIs this server to be used for 802.1X authentication?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.1.1.8 |
awcAaaServerMacAddrAuthEnabledIs this server to be used for MAC-address
authentication?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.1.1.9 |
awcAaaServerAdminAuthEnabledIs this server to be used for AP Admin
authentication?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.1.1.10 |
awcAaaServerMipAuthEnabledIs this server to be used for Proxy Mobile IP
authentication?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.1.1.11 |
awcAaaServerMaxRetransmissionThe maximum number of retransmission of a request.
If an Access Point does not receive a response within
awcAaaServerTimeout, it retransmits the request. If no
response is received for a maximum number of
retransmissions, the server is considered not reachable
and a secondary server (if any) will be chosen
temporarily.rw Gauge .1.3.6.1.4.1.522.3.19.1.1.12 |
awcAcctServerTableThis table provides information of AAA
accounting servers currently available to
this access point and the parameters used to
connect to the servers.
Each entry corresponds to an AAA server and is
indexed by the priority in which the server
should be used. AAA server of lowest priority
value should be used first. Entries in this
table cannot be created or deleted by the
network management system. All entries are
created or deleted by the agent. SEQUENCE OF AwcAcctServerEntry .1.3.6.1.4.1.522.3.19.2 |
awcAcctServerEntryAn entry provide the AAA server usage priority,
protocol, name, IP port, request timeout, and
security mechanisms supported. AwcAcctServerEntry .1.3.6.1.4.1.522.3.19.2.1 |
awcAcctServerPriorityThe priority of the server for when multiple servers
are configured for the same service. Lower priority
servers are used, in sequence, as backups.ro INTEGER .1.3.6.1.4.1.522.3.19.2.1.1 |
awcAcctServerProtocolThe protocol used to communicate with the AAA server.rw Enumeration .1.3.6.1.4.1.522.3.19.2.1.2 |
awcAcctServerNameThe DNS-resolvable name or numeric IP address of the
AAA server.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.19.2.1.3 |
awcAcctServerPortThe IP port number of the AAA server.rw Gauge .1.3.6.1.4.1.522.3.19.2.1.4 |
awcAcctServerTimeoutThe amount of time (in seconds) that an Access Point
should wait for a response from the Accounting server
before retransmitting the request. If the Access Point
does not receive a response within the timeout
period, it retransmits the request. If no response is
received for a maximum of awcAcctServerMaxRetransmission
retransmissions, the server is considered not reachable
and a secondary server (if any) will be chosen.
If the AP and the Accounting server are connected through a
low-speed network and the awcAcctServerTimeout value is set
to too low, the network may become congested, as the AP
retransmits unacknowledged accounting requests that have
not yet reached the serverrw Gauge .1.3.6.1.4.1.522.3.19.2.1.5 |
awcAcctServerUpdateEnableIs the Acct update to this server enabled?.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.2.1.6 |
awcAcctServerUpdateDelayThe amount of time (in seconds) that the Access Point
should send to the AAA server an update of accounting information.rw Gauge .1.3.6.1.4.1.522.3.19.2.1.7 |
awcAcctClientNameThe name the Access Point uses to identify itself when
acting as the supplicant.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.19.2.1.8 |
awcAcctSecureEnabledIs this server to be used for accounting with security AUTH?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.2.1.9 |
awcAcctGeneralEnabledIs this server to be used for accounting without security AUTH?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.2.1.10 |
awcAcctServerSharedSecretThe textual string shared between the ACCT server and
the access point, used to authenticate the messages
delivered between them.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.522.3.19.2.1.11 |
awcAcctServerMaxRetransmissionThe maximum number of retransmissions of an accounting
request. If an Access Point does not receive a response
within awcAcctServerTimeout, it retransmits the request.
If no response is received for a maximum number of
retransmissions, the server is considered not reachable
and a secondary server (if any) will be chosen.rw Gauge .1.3.6.1.4.1.522.3.19.2.1.12 |
awcAcctConfig OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.19.3 |
awcAcctEnableThe boolean indicating if the accounting is enabled.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.3.1 |
awcAcctStopDelayEnableThe boolean indicating if the accounting stop request
should be delayed before sent.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.19.3.2 |
awcAcctStopDelayTimeThe duration for the AP to delay sending the STOP message if any.rw Gauge .1.3.6.1.4.1.522.3.19.3.3 |
awcAaaAuthConfig OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.19.4 |
awcAaaServerPrimaryReattemptPeriodWhile the primary authentication server serving a given
authentication function is not reachable, the duration,
in minutes, at which the AP should reattempt to return
to its primary server serving that authentication function.
A value of zero indicates that primary authentication server
reattempt is disabled.rw Gauge .1.3.6.1.4.1.522.3.19.4.1 |
awcAaaServerDot1xAuthCurrentThe index of the currently selected AAA server for 802.1X user
authentication. A value of zero indicates that no authentication
server is available to service 802.1X authentication function to
this AP. The value of 1 to 4 indicates the corresponding server
for 802.1X authentication.ro INTEGER .1.3.6.1.4.1.522.3.19.4.2 |
awcAaaServerMacAddrAuthCurrentThe index of the currently selected AAA server for MAC address
authentication. A value of zero indicates that no authentication
server is available to service MAC address authentication
function to this AP. The value of 1 to 4 indicates the
corresponding server in use for MAC address authentication
function.ro INTEGER .1.3.6.1.4.1.522.3.19.4.3 |
awcAaaServerAdminAuthCurrentThe index of the currently selected AAA server for the Access
Point administrator authentication function. A value of zero
indicates that no authentication server is available to service
admin login authentication function to this AP. The value of 1
to 4 indicates the corresponding server in use for the AP admin
authentication function.ro INTEGER .1.3.6.1.4.1.522.3.19.4.4 |
awcAaaServerMipAuthCurrentThe index of the currently selected AAA server used to retrieve
authentication data requied for Proxy Mobile registration and
authentication function. A value of zero indicates that no
authentication server is available for this function. The value of 1
to 4 indicates the corresponding server in use for proxy mobile IP
related authentication function.ro INTEGER .1.3.6.1.4.1.522.3.19.4.5 |
awcProtocolFilters OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.20 |
awcPrFltEthertypeSetTableTable of static Ethertype Filters SEQUENCE OF AwcPrFltEthertypeSetEntry .1.3.6.1.4.1.522.3.20.1 |
awcPrFltEthertypeSetEntryAn entry in awcPrFltEthertypeTable. AwcPrFltEthertypeSetEntry .1.3.6.1.4.1.522.3.20.1.1 |
awcPfEtSetIdNumeric identifier of the static Ethertype
filters set.ro Gauge .1.3.6.1.4.1.522.3.20.1.1.1 |
awcPfEtSetNameDescriptive name of the static Ethertype
filters set. Max. string length is 64 octets.rw DisplayString .1.3.6.1.4.1.522.3.20.1.1.2 |
awcPfEtDefaultDispositionDefault packet disposition of the static Ethertype
filters set.rw AwcPfDisposition -- Rsyntax INTEGER { -- forward(1), -- block(2), -- default(3) -- } .1.3.6.1.4.1.522.3.20.1.1.3 |
awcPfEtDefaultUcastTimeToLiveDefault time-to-live for unicast (directed) packets.
A value of 0 means to use the system defaults.rw Gauge .1.3.6.1.4.1.522.3.20.1.1.4 |
awcPfEtDefaultNUcastTimeToLiveDefault time-to-live for non-unicast (multicast)
packets. A value of 0 means to use the system
defaults.rw Gauge .1.3.6.1.4.1.522.3.20.1.1.5 |
awcPfEtSetStatusRow status of the entire static Ethertype filters
set.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.20.1.1.6 |
awcPrFltEthertypeTableTable of individual static Ethertype filters. SEQUENCE OF AwcPrFltEthertypeEntry .1.3.6.1.4.1.522.3.20.2 |
awcPrFltEthertypeEntryAn entry in the individual static Ethertype
filter table. AwcPrFltEthertypeEntry .1.3.6.1.4.1.522.3.20.2.1 |
awcPfEtEthertypeEthertype (protocol) to which this individual
static filter appliesro INTEGER(1..255|1501..65535) .1.3.6.1.4.1.522.3.20.2.1.1 |
awcPfEtDispositionDesignation of how the protocol should be
handled.rw AwcPfDisposition -- Rsyntax INTEGER { -- forward(1), -- block(2), -- default(3) -- } .1.3.6.1.4.1.522.3.20.2.1.2 |
awcPfEtUserPriorityDesignation of the priority assigned to
packets of the Ethertype.rw AwcPfPriority -- Rsyntax INTEGER { -- default(1), -- background(2), -- spare(3), -- excellentEffort(4), -- controlledLoad(5), -- interactiveVideo(6), -- interactiveVoice(7), -- networkControl(8) -- } .1.3.6.1.4.1.522.3.20.2.1.3 |
awcPfEtUcastTimeToLiveTime-to-live for unicast (directed) packets. A
value of 0 means to use the Filter Set defaults.rw Gauge .1.3.6.1.4.1.522.3.20.2.1.4 |
awcPfEtNUcastTimeToLiveTime-to-live for non-unicast (multicast) packets. A
value of 0 means to use the Filter Set defaults.rw Gauge .1.3.6.1.4.1.522.3.20.2.1.5 |
awcPfEtAlertShould an alert be registered when a packet of
this Ethertype is observed?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.20.2.1.6 |
awcPfEtStatusRow status of the individual static Ethertype
filters.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.20.2.1.7 |
awcPrFltIpProtocolSetTableTable of static IP Protocol Filters SEQUENCE OF AwcPrFltIpProtocolSetEntry .1.3.6.1.4.1.522.3.20.3 |
awcPrFltIpProtocolSetEntryAn entry in awcPrFltIpProtocolTable. AwcPrFltIpProtocolSetEntry .1.3.6.1.4.1.522.3.20.3.1 |
awcPfIppSetIdNumeric identifier of the static IP Protocol
filters set.ro Gauge .1.3.6.1.4.1.522.3.20.3.1.1 |
awcPfIppSetNameDescriptive name of the static IP Protocol
filters set. Max. string length is 64 octets.rw DisplayString .1.3.6.1.4.1.522.3.20.3.1.2 |
awcPfIppDefaultDispositionDefault packet disposition of the static IP Protocol
filters set.rw AwcPfDisposition -- Rsyntax INTEGER { -- forward(1), -- block(2), -- default(3) -- } .1.3.6.1.4.1.522.3.20.3.1.3 |
awcPfIppDefaultUcastTimeToLiveDefault time-to-live for unicast (directed) packets.
A value of 0 means to use the system defaults.rw Gauge .1.3.6.1.4.1.522.3.20.3.1.4 |
awcPfIppDefaultNUcastTimeToLiveDefault time-to-live for non-unicast (multicast)
packets. A value of 0 means to use the system
defaults.rw Gauge .1.3.6.1.4.1.522.3.20.3.1.5 |
awcPfIppSetStatusRow status of the entire static IP Protocol filters
set.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.20.3.1.6 |
awcPrFltIpProtocolTableTable of individual static IP Protocol
filters. SEQUENCE OF AwcPrFltIpProtocolEntry .1.3.6.1.4.1.522.3.20.4 |
awcPrFltIpProtocolEntryAn entry in the individual static IP Protocol
filter table. AwcPrFltIpProtocolEntry .1.3.6.1.4.1.522.3.20.4.1 |
awcPfIppIpProtocolIP Protocol to which this individual static
filter appliesro INTEGER .1.3.6.1.4.1.522.3.20.4.1.1 |
awcPfIppDispositionDesignation of how the protocol should be
handled.rw AwcPfDisposition -- Rsyntax INTEGER { -- forward(1), -- block(2), -- default(3) -- } .1.3.6.1.4.1.522.3.20.4.1.2 |
awcPfIppUserPriorityDesignation of the priority assigned to
packets of the IP Protocol.rw AwcPfPriority -- Rsyntax INTEGER { -- default(1), -- background(2), -- spare(3), -- excellentEffort(4), -- controlledLoad(5), -- interactiveVideo(6), -- interactiveVoice(7), -- networkControl(8) -- } .1.3.6.1.4.1.522.3.20.4.1.3 |
awcPfIppUcastTimeToLiveTime-to-live for unicast (directed) packets. A
value of 0 means to use the Filter Set defaults.rw Gauge .1.3.6.1.4.1.522.3.20.4.1.4 |
awcPfIppNUcastTimeToLiveTime-to-live for non-unicast (multicast) packets. A
value of 0 means to use the Filter Set defaults.rw Gauge .1.3.6.1.4.1.522.3.20.4.1.5 |
awcPfIppAlertShould an alert be registered when a packet
of this IP Protocol is observed?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.20.4.1.6 |
awcPfIppStatusRow status of the individual static IP Protocol
filters.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.20.4.1.7 |
awcPrFltIpPortSetTableTable of static IP Port Filters SEQUENCE OF AwcPrFltIpPortSetEntry .1.3.6.1.4.1.522.3.20.5 |
awcPrFltIpPortSetEntryAn entry in awcPrFltIpPortTable. AwcPrFltIpPortSetEntry .1.3.6.1.4.1.522.3.20.5.1 |
awcPfIptSetIdNumeric identifier of the static IP Port
filters set.ro Gauge .1.3.6.1.4.1.522.3.20.5.1.1 |
awcPfIptSetNameDescriptive name of the static IP Port filters
set. Max. string length is 64 octets.rw DisplayString .1.3.6.1.4.1.522.3.20.5.1.2 |
awcPfIptDefaultDispositionDefault packet disposition of the static IP Port
filters set.rw AwcPfDisposition -- Rsyntax INTEGER { -- forward(1), -- block(2), -- default(3) -- } .1.3.6.1.4.1.522.3.20.5.1.3 |
awcPfIptDefaultUcastTimeToLiveDefault time-to-live for unicast (directed) packets.
A value of 0 means to use the system defaults.rw Gauge .1.3.6.1.4.1.522.3.20.5.1.4 |
awcPfIptDefaultNUcastTimeToLiveDefault time-to-live for non-unicast (multicast)
packets. A value of 0 means to use the system
defaults.rw Gauge .1.3.6.1.4.1.522.3.20.5.1.5 |
awcPfIptSetStatusRow status of the entire static IP Port filters set.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.20.5.1.6 |
awcPrFltIpPortTableTable of individual static IP Port filters. SEQUENCE OF AwcPrFltIpPortEntry .1.3.6.1.4.1.522.3.20.6 |
awcPrFltIpPortEntryAn entry in the individual static IP Port
filter table. AwcPrFltIpPortEntry .1.3.6.1.4.1.522.3.20.6.1 |
awcPfIptIpPortIP Port to which this individual static filter
appliesro INTEGER .1.3.6.1.4.1.522.3.20.6.1.1 |
awcPfIptDispositionDesignation of how the Port should be
handled.rw AwcPfDisposition -- Rsyntax INTEGER { -- forward(1), -- block(2), -- default(3) -- } .1.3.6.1.4.1.522.3.20.6.1.2 |
awcPfIptUserPriorityDesignation of the priority assigned to
packets of the IP Port.rw AwcPfPriority -- Rsyntax INTEGER { -- default(1), -- background(2), -- spare(3), -- excellentEffort(4), -- controlledLoad(5), -- interactiveVideo(6), -- interactiveVoice(7), -- networkControl(8) -- } .1.3.6.1.4.1.522.3.20.6.1.3 |
awcPfIptUcastTimeToLiveTime-to-live for unicast (directed) packets. A
value of 0 means to use the Filter Set defaults.rw Gauge .1.3.6.1.4.1.522.3.20.6.1.4 |
awcPfIptNUcastTimeToLiveTime-to-live for non-unicast (multicast) packets. A
value of 0 means to use the Filter Set defaults.rw Gauge .1.3.6.1.4.1.522.3.20.6.1.5 |
awcPfIptAlertShould an alert be registered when a packet of
this IP Port is observed?rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.20.6.1.6 |
awcPfIptStatusRow status of the individual static IP Port filters.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.20.6.1.7 |
awcMobileIP OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.22 |
enableMobileIPIf true, the Access Point's proxy mobile IP
service is enabled. If false, proxy mobile
IP service is disabled.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.22.1 |
awcprimAAPThe first AAP hostname or IP address from a
list of 3 AAPs.rw DisplayString .1.3.6.1.4.1.522.3.22.2 |
awcsec1AAPThe second AAP hostname or IP address from a
list of 3 AAPs.rw DisplayString .1.3.6.1.4.1.522.3.22.3 |
awcsec2AAPThe third AAP hostname or IP address from a
list of 3 AAPs.rw DisplayString .1.3.6.1.4.1.522.3.22.4 |
mipSATableThis entity's Mobile IP Local SA Bindings table. SEQUENCE OF MipSAEntry .1.3.6.1.4.1.522.3.22.5 |
mipSAEntryAn entry of SA bindings for a range of IP Addresses. MipSAEntry .1.3.6.1.4.1.522.3.22.5.1 |
mipSAIpStartStarting IP Address of a range for the SA binding. IpAddress .1.3.6.1.4.1.522.3.22.5.1.1 |
mipSAIpEndEnding IP Address of the range for the SA binding.rw IpAddress .1.3.6.1.4.1.522.3.22.5.1.2 |
mipSAGroupSPIGroup SPI for the range of IP Address in the Local
SA bindingrw DisplayString .1.3.6.1.4.1.522.3.22.5.1.3 |
mipSAGroupKeyGroup Key for the range of IP Address in the Local
SA bindingrw DisplayString .1.3.6.1.4.1.522.3.22.5.1.4 |
mipSAStatusRow status of the pMIP SA. Allows deletion via SNMP.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.522.3.22.5.1.5 |
awcmipDebugIf true, the Access Point's proxy mobile IP
debug information is printed on the console.
If false, debug messages are not printed.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.522.3.22.6 |
awcVxConformance OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100 |
awcVxCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.1 |
awcVxCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.1.1 |
awcVxGroups OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2 |
awcSystemGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.1 |
bootconfigVxGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.2 |
awcSerialDevGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.3 |
awcFtpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.4 |
awcIfTableGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.5 |
awc802dot11Group OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.6 |
awcUserMgrGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.7 |
awcHttpdGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.8 |
awcDnsResGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.9 |
awcSnmpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.10 |
awcSntpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.11 |
awcForwardTblGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.12 |
awcEventLogGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.14 |
awcEtherMIBGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.15 |
awcPolicyGroupsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.16 |
awcDdpIAPPGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.17 |
awcHotStandbyGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.18 |
awcAaaGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.19 |
awcProtocolFiltersGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.20 |
awcMobileIpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.21 |
awcEthernetLostGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.22 |
awcTrapLogGroup OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.100.2.100 |