AWC-VLAN-CFG-MIB
AI MIB Summary
The AWC-VLAN-CFG-MIB facilitates the configuration and monitoring of Virtual LAN (VLAN) parameters, including VLAN IDs, names, and port memberships, specifically on Cisco Aironet wireless access points via SNMP. It enables administrators to programmatically define broadcast domains and manage Layer 2 segmentation for wireless client traffic without requiring direct CLI access.
Aironet products VLAN Configuration MIB.
Main OID:
awcVlanCfgMIB.1.3.6.1.4.1.522.3.21
29
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
awcVlanCfgMIBAironet products VLAN Configuration MIB. MODULE-IDENTITY .1.3.6.1.4.1.522.3.21 |
awcVlanCfgObjects OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.21.1 |
awcMaxVlanIdsThe Maximum number of discrete VLAN IDs supported.
The VLAN IDs need not be consecutive.ro Unsigned32 .1.3.6.1.4.1.522.3.21.1.1 |
awcVlanEncapModeThe encapsulation mode setting controls transmit
tagging logic for all ports. The value of this
object is derived from other settings within the
VLAN MIB.ro AwcVlanEncapType .1.3.6.1.4.1.522.3.21.1.2 |
awcNativeVlanIdNative VLAN ID for the device. The default Native
VLAN ID is 0, for no VLAN ID. If the device is attached
to an Ethernet bridge/switch VLAN port then a non-zero
Native VLAN ID must match the Port VLAN ID of the
bridge/switch port. The Native VLAN ID is the default
VLAN ID for frames that are not otherwise
associated with a VLAN ID.rw AwcVlanId .1.3.6.1.4.1.522.3.21.1.3 |
awcVlanAllowEncryptedWhen this attribute is true, the STA shall
indicate at the MAC service interface received
MSDUs regardless of the setting of the WEP
subfield of the Frame Control field, so long
as no other VLAN parameters necessitate use
of encryption. The default value of this attribute
shall be true.
The general use for awcVlanAllowEncrypted to be
true even when no static WEP keys are set for
a VLAN is to allow a station to utilize EAP
authentication to encrypt directed packets,
even while multicast packets are unencrypted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.522.3.21.1.4 |
awcVlanAnyEnabledWhen this attribute is true, VLAN operation of the
system is enabled when any awcVlanEnabled value is
true. When this attribute is false, VLAN operation
is disabled. The awcVlanAnyEnabled thus acts as a
master switch to enable or disable VLAN operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.522.3.21.1.5 |
awcVlanCfgTableA table used for configuring and managing VLANS. SEQUENCE OF AwcVlanCfgEntry .1.3.6.1.4.1.522.3.21.1.6 |
awcVlanCfgEntryVLAN table entry containing parameters for configuring
and managing a particular VLAN. AwcVlanCfgEntry .1.3.6.1.4.1.522.3.21.1.6.1 |
awcVlanIndexVLAN ID to which the parameters in this conceptual
row shall be applied. If 4095, the parameters in
this conceptual row shall be applied to
non-VLAN-tagged frames. AwcVlanIndex .1.3.6.1.4.1.522.3.21.1.6.1.1 |
awcVlanPolIdDefault Policy Group Identifier for hosts occupying
this VLAN.rw AwcPolId .1.3.6.1.4.1.522.3.21.1.6.1.2 |
awcVlanEnabledIf true, this VLAN is enabled on all trunk and
hybrid ports. If false, this VLAN is disabled on
all ports.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.522.3.21.1.6.1.3 |
awcVlanNUcastKeyRotationIntervalWEP key rotation period. 0 indicates no key rotation.rw INTEGER .1.3.6.1.4.1.522.3.21.1.6.1.4 |
awcVlanRowStatusUsed for creating/deleting conceptual rows in this
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.522.3.21.1.6.1.5 |
awcVlanMicAlgorithmAuxiliary Message Integrity Check (MIC) calculated on
WEP-encoded packets of stations assigned to this VLAN.
This object is not applicable for the reserved VLAN
4095.rw AwcDot11MicAlgorithm .1.3.6.1.4.1.522.3.21.1.6.1.6 |
awcVlanWEPKeyPermuteAlgorithmFunction through which the WEP encryption key is
permuted between key renewal periods for stations
assigned to this VLAN. This object is not
applicable for the reserved VLAN 4095.rw AwcDot11WEPKeyPermuteAlgorithm .1.3.6.1.4.1.522.3.21.1.6.1.7 |
awcVlanNameDescriptive textual name for the VLAN.rw OCTET STRING .1.3.6.1.4.1.522.3.21.1.6.1.8 |
awcVlanDefaultUserPriorityDesignation of the priority assigned to packets
transmitted over this VLAN, if no other filter or
classification rule has yet assigned a priority.rw AwcPfPriority .1.3.6.1.4.1.522.3.21.1.6.1.9 |
awcVlanAlertShould an alert be registered when a packet on
this VLAN is observed?rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.522.3.21.1.6.1.10 |
awcVlanNUcastKeyTableDefault Shared WEP Keys for all 802.11 packets
transmitted and received as non-VLAN-tagged
frames over a port with the Port VLAN ID specified
as awcVlanIndex. If WEP encryption
is enabled for transmitted 802.11 frames, then the
set of 1 to 4 default shared WEP keys are used
to encrypt transmitted 802.11 broadcast/multicast
frames associated with the Port VLAN ID. The
shared WEP keys are also used to encrypt/decrypt
unicast frames, associated with the Port VLAN ID,
if an individual session key is not defined for the
target station address. SEQUENCE OF AwcVlanNUcastKeyEntry .1.3.6.1.4.1.522.3.21.1.7 |
awcVlanNUcastKeyEntryAn entry in the awcVlanNUcastKeyTable table. AwcVlanNUcastKeyEntry .1.3.6.1.4.1.522.3.21.1.7.1 |
awcVlanNUcastKeyIndex802.11 WEP Key Index, + 1, used when transmitting or
receiving frames with this key. INTEGER .1.3.6.1.4.1.522.3.21.1.7.1.1 |
awcVlanNUcastKeyLenLength in octets of awcVlanNUcastKeyValue. Common
values are 5 for 40-bit WEP and 13 for 128-bit WEP.
A value of 0 means that the key is not set.rw INTEGER .1.3.6.1.4.1.522.3.21.1.7.1.2 |
awcVlanNUcastKeyValueA WEP default secret key value. The value is
write-only (attempt to read will result in
return of zero-length string).rw WEPKeytype128 .1.3.6.1.4.1.522.3.21.1.7.1.3 |
awcVlanAllowUnencryptedVlanIdSingle VLAN ID on which unencrypted packets are
allowed. The default Unencrypted VLAN ID is 0,
meaning that all VLANs require full encryption.rw AwcVlanId .1.3.6.1.4.1.522.3.21.1.8 |
awcVlanCfgNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.21.2 |
awcVlanCfgConformance OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.21.3 |
awcVlanCfgCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.21.3.1 |
awcVlanCfgGroups OBJECT IDENTIFIER .1.3.6.1.4.1.522.3.21.3.2 |