AVAYA-RTP-MIB
AI MIB Summary
The AVAYA-RTP-MIB provides SNMP access to Quality of Service (QoS) statistics for Real-Time Protocol (RTP) sessions on Avaya VoIP infrastructure, enabling the monitoring of terminated session metrics and the configuration of threshold-based traps for degraded audio streams. This module facilitates fault detection by alerting operators when specific bad-QoS conditions occur in individual sessions or when a defined number of concurrent streams exceed error thresholds, including rate-limiting controls for these notifications.
This module defines an interface to RTP sessions QoS statistic gathering capabilities in Avaya's VoIP enabled devices. The MIB, designed for Avaya Services, allows operators to perform the following tasks: 1. View the statistics of recently terminated RTP session. 2. Define QoS related thresholds that define bad-QoS conditions. 3. View the statistics of last session, which experienced bad QoS. 4. Enable a special QoS trap that is sent upon termination of RTP session with bad QoS. 5. Enable a special QoS fault trap that is sent when more than N streams suffer from bad QoS. And a QoS clear trap that is sent when this fault conditions ends. 6. Configure the above traps rate limiting mechanism. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
avRtpMib.1.3.6.1.4.1.6889.2.7
140
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
140 total| Object Name |
|---|
avaya OBJECT IDENTIFIER .1.3.6.1.4.1.6889 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2 |
avRtpMibThis module defines an interface to RTP sessions QoS statistic gathering capabilities in Avaya's VoIP enabled devices. The MIB, designed for Avaya Services, allows operators to perform the following tasks: 1. View the statistics of recently terminated RTP session. 2. Define QoS related thresholds that define bad-QoS conditions. 3. View the statistics of last session, which experienced bad QoS. 4. Enable a special QoS trap that is sent upon termination of RTP session with bad QoS. 5. Enable a special QoS fault trap that is sent when more than N streams suffer from bad QoS. And a QoS clear trap that is sent when this fault conditions ends. 6. Configure the above traps rate limiting mechanism. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification) embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisionsIt is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties a non-exclusive license to use this Specification in connection with the management of AVAYA products.This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6889.2.7 |
avRtpNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.7.0 |
avRtpQoSTrapThe trap contains QoS statistics for a single RTP session. The device can send this trap when an RTP session that experienced bad QoS terminates NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.7.0.1 |
avRtpQoSFaultThe trap indicates that more than XXX RTP sessions currently suffers from bad QoS. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.7.0.2 |
avRtpQoSClearThis trap indicates that a QoS fault, previously indicated by an avRtpQoSFault has cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.7.0.3 |
avRtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.7.1 |
avRtpThresholdTableThresholds configuration table SEQUENCE OF AvRtpThresholdEntry .1.3.6.1.4.1.6889.2.7.1.1 |
avRtpThresholdEntryEach entry contains one set of thresholds. In this version only one entry is supported (1). AvRtpThresholdEntry .1.3.6.1.4.1.6889.2.7.1.1.1 |
avRtpThresholdSetThe threshold setro Integer32 .1.3.6.1.4.1.6889.2.7.1.1.1.1 |
avRtpThresholdMinStatWinThe minimum number of observed RTP sequence numbers advance needed for the evaluation of packet loss.rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.2 |
avRtpThresholdRxCodecLossCodec packet loss i.e. the loss at the codec decoder. This threshold is evaluated once for each statistical interval (6-12 seconds)rw AvRtpLoss .1.3.6.1.4.1.6889.2.7.1.1.1.3 |
avRtpThresholdRxAvgCodecLossThreshold on the avarage codec lossrw AvRtpLoss .1.3.6.1.4.1.6889.2.7.1.1.1.4 |
avRtpThresholdRxCodecLossEvThe device generates a QoS traps if avRtpThresholdRxCodecLoss was crossed avRtpThresholdRxCodecLossEv times during the session (0 means that no traps are sent for this threshold).rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.5 |
avRtpThresholdCodecRttCodec round trip time threshold (an estimate for the overall RTT, including the internal delays). This threshold is evaluated each time an RTCP message is received (usually every 6-12 seconds)rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.6 |
avRtpThresholdCodecRttEvThe device generates a QoS traps if avRtpThresholdCodecRtt was crossed avRtpThresholdCodecRttEv times during the session (0 means that no traps are sent for this threshold).rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.7 |
avRtpThresholdEcReturnLossEcho Cancellation return loss in -dBm. High value (low absolute) means that a lot of energy is returned which can result in auditable echos. This threshold is evaluated once for each statistical interval (6-12 seconds)rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.8 |
avRtpThresholdEcReturnLossEvrw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.9 |
avRtpThresholdRxLossThe received packet loss. This threshold is evaluated once for each statistical interval (6-12 seconds)rw AvRtpLoss .1.3.6.1.4.1.6889.2.7.1.1.1.10 |
avRtpThresholdRxLossEvThe device generates a QoS traps if avRtpThresholdRxCodecLoss was crossed avRtpThresholdRxCodecLossEv times during the session (0 means that no traps are sent for this threshold).rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.11 |
avRtpThresholdRemLossRemote peer packet loss threshold learnt from received RTCP reports. This threshold is evaluated once for each statistical interval (6-12 seconds)rw AvRtpLoss .1.3.6.1.4.1.6889.2.7.1.1.1.12 |
avRtpThresholdRemLossEvrw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.13 |
avRtpThresholdAvgRxLossThe received average packet loss. This threshold is evaluated at the end of the session.rw AvRtpLoss .1.3.6.1.4.1.6889.2.7.1.1.1.14 |
avRtpThresholdAvgRemLossThreshold on the average remote packet loss, learnt from RTCP reports. This threshold is evaluated at the end of the session.rw AvRtpLoss .1.3.6.1.4.1.6889.2.7.1.1.1.15 |
avRtpThresholdRxJitterA threshold on the received inter-arrival jitter, measured in milliseconds. This threshold is evaluated once for each statistical interval (6-12 seconds)rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.16 |
avRtpThresholdRxJitterEvrw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.17 |
avRtpThresholdRemJitterA threshold on the remote inter-arrival jitter, learnt from RTCP reports. This item is measured in milliseconds and is evaluated upon reception of an RTCP message.rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.18 |
avRtpThresholdRemJitterEvrw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.19 |
avRtpThresholdRttA threshold on the network round-trip-time, measured in milliseconds. This item is evaluated upon reception of RTCP messages.rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.20 |
avRtpThresholdRttEvrw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.21 |
avRtpThresholdRxSsrcChangeEvThe device would generate an end-of-session QoS trap if the number of observed SSRC changes was over this treshold.rw INTEGER .1.3.6.1.4.1.6889.2.7.1.1.1.22 |
avRtpEnableEnable RTP statistic collection by the device. Note that statistic collection may cause minor performance hit.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.1.2 |
avRtpQoSTrapEnableEEnable the QoS-Trap generation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.1.3 |
avRtpQoSFaultTrapEnableEnable the QoS-Trap generation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.1.4 |
avRtpQoSFaultThThe number of concurrent active RTP sessions that suffers from bad QoS (according to avRtpThresholds) that cause the device to enter a 'QoS fault' state. Note, upon entering this fault state, the device sends a avRtpQoSFault trap.rw INTEGER .1.3.6.1.4.1.6889.2.7.1.5 |
avRtpQoSClearThThe number of concurrent active RTP sessions that suffers from bad QoS (according to avRtpThresholds) that clears the 'QoS fault' state. Note, when the QoS fault clears, the device send a avRtpQoSClear trap.rw INTEGER .1.3.6.1.4.1.6889.2.7.1.6 |
avRtpTxQoSTrapsThe number of avRtpQoSTrap sent so far.ro Counter32 .1.3.6.1.4.1.6889.2.7.1.7 |
avRtpQoSTrapsDropThe number of avRtpQoSTraps that were dropped by the rate limiterro Counter32 .1.3.6.1.4.1.6889.2.7.1.8 |
avRtpQoSTrapTokenIntervalConfigure the QoS trap token-bucket rate limiter. This item sets the token interval in hundredth of seconds.rw TimeInterval .1.3.6.1.4.1.6889.2.7.1.9 |
avRtpQoSTrapBucketSizeConfigure the QoS trap token-bucket rate limiter. This item configures the bucket-size.rw INTEGER .1.3.6.1.4.1.6889.2.7.1.10 |
avRtpDateAndTimeThe current RTC date and Timero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.1.11 |
avRtpMaxSessionTableSizeThe maximum number of rows of the session tablero Integer32 .1.3.6.1.4.1.6889.2.7.1.12 |
avRtpReservedSessionTableRowsThe number of rows in session table reserved for terminated sessions that had QoS eventsro Integer32 .1.3.6.1.4.1.6889.2.7.1.13 |
avRtpClearClear the Session tablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.1.14 |
avRtpFaultMaskFault mask enables Avaya Fault-Mon to poll the device status Bit 0 - Set if there is a fault condition according to avRtpQoSFaultTh/avRtpQoSClearThro OCTET STRING .1.3.6.1.4.1.6889.2.7.1.15 |
avRtpSessionTableThis table contains statistics for recently terminated RTP flows. SEQUENCE OF AvRtpSessionEntry .1.3.6.1.4.1.6889.2.7.2 |
avRtpSessionEntryEach row contains information from a single RTP session. Rows are removed when the space limits are reached (avRtpSessionTableSize). There are avRtpSessionTableReservedRows reserved rows for terminated sessions that had QoS events. Sessions that had QoS events might appear twice in the table, e.g. once with AvRtpSessionState = terminated and once with terminatedWithEvent. AvRtpSessionEntry .1.3.6.1.4.1.6889.2.7.2.1 |
avRtpSessionStateAn arbitrary RTP-flow sequence number, serves as the MIB tables indexro Enumeration .1.3.6.1.4.1.6889.2.7.2.1.1 |
avRtpSessionIDAn arbitrary RTP-flow sequence number, serves as the MIB tables indexro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.2 |
avRtpSessionEngineIDThe number of the VoIP engine responsible for the RTP stream. More information about the specific VoIP engine can be found in avRtpSumTablero Integer32 .1.3.6.1.4.1.6889.2.7.2.1.3 |
avRtpSessionLocAddrTypeThis item specifies whether the IP addresses in this row are in IPv6 or in IPv4 format (See RFC3291)ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.7.2.1.4 |
avRtpSessionLocAddrThe RTP stream local RTP address.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.7.2.1.5 |
avRtpSessionLocAddrV4The RTP stream local RTP address (IPv4).ro IpAddress .1.3.6.1.4.1.6889.2.7.2.1.6 |
avRtpSessionLocAddrV6The RTP stream local RTP address (IPv6).ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.7.2.1.7 |
avRtpSessionRemAddrTypeThis item specifies whether the remote IP addresses in this row is in IPv6 or in IPv4 format (See RFC3291)ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.7.2.1.8 |
avRtpSessionRemAddrThe RTP stream remote peer addressro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.7.2.1.9 |
avRtpSessionRemAddrV4The RTP stream Remote RTP address (IPv4).ro IpAddress .1.3.6.1.4.1.6889.2.7.2.1.10 |
avRtpSessionRemAddrV6The RTP stream Remote RTP address (IPv6).ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.7.2.1.11 |
avRtpSessionLocPortThe RTP stream local UDP portro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.7.2.1.12 |
avRtpSessionRemPortThe RTP stream remote UDP portro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.6889.2.7.2.1.13 |
avRtpSessionStartTimeThe stream start timero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.2.1.14 |
avRtpSessionEndTimeThe stream end timero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.2.1.15 |
avRtpSessionDurationThe duration of the stream in hundredth of secondsro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.2.1.16 |
avRtpSessionCnameThe RTP canonical name of the gatewayro DisplayString .1.3.6.1.4.1.6889.2.7.2.1.17 |
avRtpSessionPhoneA string containing the phone extensions (received for CM), in the format of <conferenceID>:<extension #1>...<extension #N>ro DisplayString .1.3.6.1.4.1.6889.2.7.2.1.18 |
avRtpSessionSeverityThe QoS problem severity for the stream. This item equals to 'warning' if a trap was suppose to be sent. and 'cleared' otherwise.ro Enumeration .1.3.6.1.4.1.6889.2.7.2.1.19 |
avRtpSessionTxLenThe transmitted RTP packet sizero Integer32 .1.3.6.1.4.1.6889.2.7.2.1.20 |
avRtpSessionTypeThis value describes the session type. It holds the RTP type for RTP streams and unique items (above 127) for non-RTP or dynamically allocated typesro Enumeration .1.3.6.1.4.1.6889.2.7.2.1.21 |
avRtpSessionTxIntervalThe interval (in milliseconds) between RTP packets.ro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.22 |
avRtpSessionTxEncrypThe Media Encryption metric indicates what kind media encryption is ,if any, is used for the RTP session. This information is valuable because: 1) media-encryption consumes more VoIP resources 2) Encryption key infrastructure may cause problems encryptionOff(0) - Encryption is off encryptionAEAv2(1) - Avaya Proprietary AEAv2 encryption encryptionAES(2) - Avaya Proprietary AES encryption Standard Encryption (Secure RTP): srtpAesCm128(4) - Counter Mode 128 AES encryption, no authentication srtpAesCm128HmacSha180(5) - AES encryption, 80bit SHA1 authentication srtpAesCm128HmacSha132(6) - AES encryption, 32bit SHA1 authentication srtpF8128HmacSha180(7) - F8 encryption, 80bit SHA1 authentication srtpHmacSha180(8) - No encryption, 80bit SHA1 authentication srtpHmacSha132(9) - No encryption, 32bit SHA1 authenticationro Enumeration .1.3.6.1.4.1.6889.2.7.2.1.23 |
avRtpSessionTxDscpThe last transmitted IP DSCP. This value may change during the call according to the RSVP status.This information is valuable because routers may give different priority to packets according to their DSCP valuero INTEGER .1.3.6.1.4.1.6889.2.7.2.1.24 |
avRtpSessionTxVlanThe VLAN on which the RTP packets are transmitted. Minus one means 'unknown'ro INTEGER (-1..4095) .1.3.6.1.4.1.6889.2.7.2.1.25 |
avRtpSessionTxL2PriThe Layer 2 (e.g. IEEE 802.1p) priority of the sent Ethernet frames. Minus 1 means unknown. This information is valuable because Ethernet switches can give frames different priority according to their 802.1p valuero INTEGER (-1..7) .1.3.6.1.4.1.6889.2.7.2.1.26 |
avRtpSessionTxSilenceSuppSilence suppression state.noRtp means that a simple silence suppression scheme was used i.e. without RTP packets on silence. Complex means that a combination of silence packets and 'no RTP on Silence' is usedThis information is valuable because: 1) silence suppression can save upto %60 bandwidth 2) Silence suppression influences user experience (especially if the terminals does not generate confort-noise)ro AvRtpSilenceSupp .1.3.6.1.4.1.6889.2.7.2.1.27 |
avRtpSessionTxSsrcThe transmitted RTP stream SSRC.This value can be used to locate a stream in a packet capture.ro Unsigned32 .1.3.6.1.4.1.6889.2.7.2.1.28 |
avRtpSessionTxRsvpThe RSVP status for the stream. This information is valuable because: 1) Routers may reserve bandwidth to for the stream. 2) Avaya VoIP endpoints changes the transmitted DSCP according to the RSVP status.ro Enumeration .1.3.6.1.4.1.6889.2.7.2.1.29 |
avRtpSessionTxResvFailThe number of times the RSVP reservation has failed. This item is init to one if RSVP is in-use.ro Gauge32 .1.3.6.1.4.1.6889.2.7.2.1.30 |
avRtpSessionStatIntervalThe thresholds are evaluated periodically, usually each time an RTCP message is being sent.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.2.1.31 |
avRtpSessionRxCodecPlayTimeThe time the codec has played frames (not including silence suppression or fill frames)ro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.32 |
avRtpSessionRxCodecLossCountThe total codec loss time in millisecondsro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.33 |
avRtpSessionRxCodecLossThe codec loss during the last Statistical interval, in 1/1000 units. The codec loss is the number of fill period divided by the statistical interval. The fill period is the duration of time that the codec had to send data to the digital to analog converter, but no codec frames were available in the jitter buffer. This is a measure for the overall packet loss after the jitter and resequencing re sequencing buffers.ro AvRtpLoss .1.3.6.1.4.1.6889.2.7.2.1.34 |
avRtpSessionRxAvgCodecLossThe total codec loss during the session.ro AvRtpLoss .1.3.6.1.4.1.6889.2.7.2.1.35 |
avRtpSessionRxCodecLossEvThe number of times codec loss was sampled over the thresholdro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.36 |
avRtpSessionRxLossThe received network loss in the last statistical interval (in 1/1000 units).ro AvRtpLoss .1.3.6.1.4.1.6889.2.7.2.1.37 |
avRtpSessionRxAvgLossThe total network loss during the session (in 1/1000 units).ro AvRtpLoss .1.3.6.1.4.1.6889.2.7.2.1.38 |
avRtpSessionRxLossEvThe number of times network loss was sampled over the thresholdro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.39 |
avRtpSessionRxThe total number of received RTP packetsro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.40 |
avRtpSessionRxLossCountThe total number of lost packetsro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.41 |
avRtpSessionRxSeqFallThe total number of sequence fall eventsro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.42 |
avRtpSessionRxDupThe total number of received duplicate packets. This item may indicate transient routing loopro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.43 |
avRtpSessionRxJBufUnderrunsThe duration of jitter buffer under runs during the call in milliseconds (i.e. buffer empty when a frame is needed by the codec).ro Gauge32 .1.3.6.1.4.1.6889.2.7.2.1.44 |
avRtpSessionRxJBufOverrunsThe duration of time in codec frames that were dropped due to jitter buffer overruns in milliseconds (i.e. jitter buffer is full)ro Gauge32 .1.3.6.1.4.1.6889.2.7.2.1.45 |
avRtpSessionRxJBufDelayThe last jitter buffer delay in milliseconds.ro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.46 |
avRtpSessionRxMaxJBufDelayThe maximum jitter buffer delay during the call (in milliseconds)ro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.47 |
avRtpSessionRxJitterThe last/current received RTP jitterro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.48 |
avRtpSessionRxAvgJitterThe average received RTP jitterro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.49 |
avRtpSessionRxJitterEvThe number of times, jitter was sampled over the threshold.ro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.50 |
avRtpSessionRxTtlThe current/last received TTL value (IP Time To Live)ro INTEGER .1.3.6.1.4.1.6889.2.7.2.1.51 |
avRtpSessionRxMinTtlThe minimum received TTL value. The technician can use this value as a hint to what was the IP route during the session.ro INTEGER .1.3.6.1.4.1.6889.2.7.2.1.52 |
avRtpSessionRxMaxTtlThe maximum received TTL value. Difference between this value and avRtpSessionRxMinTtl may indicate route changes during the call.ro INTEGER .1.3.6.1.4.1.6889.2.7.2.1.53 |
avRtpSessionRxDscpThe last received DSCP value.ro INTEGER .1.3.6.1.4.1.6889.2.7.2.1.54 |
avRtpSessionRxL2PriThe last received L2 priority (IEEE 802.1p, Ethernet priority)ro INTEGER (-1..7) .1.3.6.1.4.1.6889.2.7.2.1.55 |
avRtpSessionRxSilenceSuppThe observed (received) silence suppression technique.ro AvRtpSilenceSupp .1.3.6.1.4.1.6889.2.7.2.1.56 |
avRtpSessionRxSsrcThe last received RTP SSRC valuero Unsigned32 .1.3.6.1.4.1.6889.2.7.2.1.57 |
avRtpSessionRxSsrcChangeCounts the number of observed SSRC changes during the call. This may indicate a remote VoIP engine fail-over event.ro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.58 |
avRtpSessionTxRtcpThe total number of transmitted RTCP reportsro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.59 |
avRtpSessionRxRtcpThe total number of received RTCP reportsro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.60 |
avRtpSessionCodecRttThe Estimated analog overall round-trip time calculated from the last received RTCP packet. The estimate value include the network delay plus the internal delays plus an estimate for the remote internal delay. This value is measured in milliseconds.ro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.61 |
avRtpSessionAvgCodecRttThe Avarage Estimated analog overall RTT (including internal delays) during the session.ro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.62 |
avRtpSessionCodecRttEvThe number of times the Estimated analog codec RTT was over the thresholdro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.63 |
avRtpSessionRttThe last RTT value in milliseconds. RTT is learnt from RTCP reportsro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.64 |
avRtpSessionAvgRttThe average RTT during the RTP sessionsro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.65 |
avRtpSessionRttEvThe number of received RTCP packets which has indicated that RTT was over the threshold.ro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.66 |
avRtpSessionRemLossThe last known remote loss (learnt from received RTCP message)ro AvRtpLoss .1.3.6.1.4.1.6889.2.7.2.1.67 |
avRtpSessionRemAvgLossThe last known remote loss (learnt from received RTCP message)ro AvRtpLoss .1.3.6.1.4.1.6889.2.7.2.1.68 |
avRtpSessionRemLossEvThe number of received RTCP packets which has indicated that loss, at the remote peer, was over the threshold..ro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.69 |
avRtpSessionRemJitterThe last known remote jitter, learnt from RTCP.ro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.70 |
avRtpSessionRemAvgJitterThe average remote jitter, learnt from RTCP.ro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.71 |
avRtpSessionRemJitterEvThe number of received RTCP messages, which have indicated that loss was over the threshold.ro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.72 |
avRtpSessionEcTailLenThe current/last echo cancellation tail length.ro Integer32 .1.3.6.1.4.1.6889.2.7.2.1.73 |
avRtpSessionEcReturnLossThe last sampled Echo Cancellation return loss.ro INTEGER .1.3.6.1.4.1.6889.2.7.2.1.74 |
avRtpSessionEcReturnLossEvThe number of time the echo cancellation return loss was sampled over the threshold. This value is sampled every avRtpSessionStatInervalro Counter32 .1.3.6.1.4.1.6889.2.7.2.1.75 |
avRtpSessionAECAcoustic echo cancellation state, relevant for speaker phonesro Enumeration .1.3.6.1.4.1.6889.2.7.2.1.76 |
avRtpSessionDebugStrThis string contains the major metrics in human readable form. It is used by the QoS trap.ro DisplayString .1.3.6.1.4.1.6889.2.7.2.1.77 |
avRtpSumTableThis table contains summary of sessions and QoS events for each VoIP engine. SEQUENCE OF AvRtpSumEntry .1.3.6.1.4.1.6889.2.7.3 |
avRtpSumEntry AvRtpSumEntry .1.3.6.1.4.1.6889.2.7.3.1 |
avRtpSumEngineIDVoIP engine identifier. Usually, the VoIP engine slot number.ro Integer32 .1.3.6.1.4.1.6889.2.7.3.1.1 |
avRtpSumEngineDescrA string describing the VoIP engine. Equals to entPhysicalDescr or cmgModuleDescriptionro DisplayString .1.3.6.1.4.1.6889.2.7.3.1.2 |
avRtpSumPeriodThe time since the summary counters were cleared.ro TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.3.1.3 |
avRtpSumActiveFlowsThe number of active flowsro Integer32 .1.3.6.1.4.1.6889.2.7.3.1.4 |
avRtpSumActiveQosEventsThe number of flows that currently suffers from QoS problems.ro Integer32 .1.3.6.1.4.1.6889.2.7.3.1.5 |
avRtpSumTotalFlowsThe total number of flowsro Counter32 .1.3.6.1.4.1.6889.2.7.3.1.6 |
avRtpSumTotalFlowsQoSEventsThe total number of flows that had QoS eventsro Counter32 .1.3.6.1.4.1.6889.2.7.3.1.7 |
avRtpSumTxTTLTTL of transmitted RTP packets.ro INTEGER .1.3.6.1.4.1.6889.2.7.3.1.8 |
avRtpSumSessionDurationTotal duration of the sessions in secondsro Counter32 .1.3.6.1.4.1.6889.2.7.3.1.9 |
avRtpSumClearClear the summary countersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.3.1.10 |
avRtpLookupTableThis virtual table is used for finding a specific SessionIDs based on the remote address and call state. SEQUENCE OF AvRtpLookupEntry .1.3.6.1.4.1.6889.2.7.4 |
avRtpLookupEntry AvRtpLookupEntry .1.3.6.1.4.1.6889.2.7.4.1 |
avRtpLookupStartTimeThe stream start timero DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6889.2.7.4.1.1 |