ASYNC-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASYNC-MIB.
38
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
async OBJECT IDENTIFIER .1.3.6.1.4.1.208.45 |
SCANET-MIB Unknown .1.3.6.1.4.1.208.45 |
asyncConfig OBJECT IDENTIFIER .1.3.6.1.4.1.208.45.1 |
asyncConfigTableA list of configuration entries. Each entry contains
the configuration of a PCMCIA interface when this
is used with an asynchronous modem. SEQUENCE OF AsyncConfigEntry .1.3.6.1.4.1.208.45.1.1 |
asyncConfigEntryEvery configuration option available for the PC-Card
modem driver. AsyncConfigEntry .1.3.6.1.4.1.208.45.1.1.1 |
asyncConfigIndexThe ifIndex for the modem interface.ro INTEGER .1.3.6.1.4.1.208.45.1.1.1.1 |
asyncConfigDialModeThe dialing mode. Note that the pulse mode may not
be compatible with all countries unless advanced
country information is setup with the init strings.rw Enumeration .1.3.6.1.4.1.208.45.1.1.1.2 |
asyncConfigAutoInitWhen auto-init is enabled the modem brand is detected
and a predefined init string suited to the modem is
used. When auto-init is disabled the user editable init
string is used.rw Enumeration .1.3.6.1.4.1.208.45.1.1.1.3 |
asyncConfigDialStringThe phone number to dial, with special characters
to control the dialing, like pauses and waits for
new dial tones. The special characters may vary
amongst the modem brands.rw OCTET STRING .1.3.6.1.4.1.208.45.1.1.1.4 |
asyncConfigInitString1The first half of the user-editable init string. The
two init strings are combined before use.rw OCTET STRING .1.3.6.1.4.1.208.45.1.1.1.5 |
asyncConfigInitString2The second half of the user-editable init string.rw OCTET STRING .1.3.6.1.4.1.208.45.1.1.1.6 |
asyncMon OBJECT IDENTIFIER .1.3.6.1.4.1.208.45.2 |
asyncMonTableA list of monitor entries. Each entry contains
the monitorable data of a PCMCIA interface when
this is used with an asynchronous modem. SEQUENCE OF AsyncMonEntry .1.3.6.1.4.1.208.45.2.1 |
asyncMonEntryEvery value that can be monitored for the PCMCIA
interface. AsyncMonEntry .1.3.6.1.4.1.208.45.2.1.1 |
asyncMonIndexThe ifIndex for the modem interface.ro INTEGER .1.3.6.1.4.1.208.45.2.1.1.1 |
asyncMonModeThe current internal state of the modem driver.ro Enumeration .1.3.6.1.4.1.208.45.2.1.1.2 |
asyncMonTransmitFailedErrorsThe number of aborted packet transmits due to a
disconnect while packets were queued for
transmission.ro Counter .1.3.6.1.4.1.208.45.2.1.1.3 |
asyncMonTransmitCongestionsThe number of packet transmissions that failed due
to lack of resources.ro Counter .1.3.6.1.4.1.208.45.2.1.1.4 |
asyncMonReceiveLostEndMarkersThe number of packets discarded because the
packet end signature was missing.ro Counter .1.3.6.1.4.1.208.45.2.1.1.5 |
asyncMonReceiveOverflowsThe number of packets discarded due to lack of
free receive buffers.ro Counter .1.3.6.1.4.1.208.45.2.1.1.6 |
asyncMonReceiveStuffingErrorsIn data transmissions via an asynchrounous modem,
certain characters are reserved for use with the
modem, e.g. to indicate the start and end of data
packets. If these reserved characters occur in the
data stream, an 'Escape character' followed by a
'Substitute character' are used to represent it.
This is known as stuffing. This parameter shows
the number of packets discarded due to illegal
combinations of the Escape character with
Substitute characters.ro Counter .1.3.6.1.4.1.208.45.2.1.1.7 |
asyncMonReceiveCRCErrorsThe number of packets discarded due to errors
in the packet detected using the packet checksum.ro Counter .1.3.6.1.4.1.208.45.2.1.1.8 |
asyncMonReceiveShortPacketsThe number of packets discarded because the packets
were shorter than the minimum legal packet length.ro Counter .1.3.6.1.4.1.208.45.2.1.1.9 |
asyncMonReceiveLongPacketsThe number of packets discarded because the packets
were larger than the maximum legal packet length.ro Counter .1.3.6.1.4.1.208.45.2.1.1.10 |
asyncMonReceiveUartOverrunErrorsThe number of packets discarded because the
incoming data exceeded the receive buffer size
in the UART.ro Counter .1.3.6.1.4.1.208.45.2.1.1.11 |
asyncMonReceiveUartParityErrorsThe number of packets discarded because of errors
in the packet detected using the parity bit.ro Counter .1.3.6.1.4.1.208.45.2.1.1.12 |
asyncMonReceiveUartFramingErrorsThe number of packets discarded because of errors
during receiving the bit stream.ro Counter .1.3.6.1.4.1.208.45.2.1.1.13 |
asyncMonReceiveUartBreakErrorsThe number of packets discarded because of a
temporary loss of the received data flow.ro Counter .1.3.6.1.4.1.208.45.2.1.1.14 |
asyncMonCallDirectionDirection of the current call.ro Enumeration .1.3.6.1.4.1.208.45.2.1.1.15 |
asyncPcmcia OBJECT IDENTIFIER .1.3.6.1.4.1.208.45.3 |
asyncPcmciaTableA list of PC-Card (PCMCIA) information entries.
Each entry contains the information available from
the modems PCMCIA-interface. SEQUENCE OF AsyncPcmciaEntry .1.3.6.1.4.1.208.45.3.1 |
asyncPcmciaEntry AsyncPcmciaEntry .1.3.6.1.4.1.208.45.3.1.1 |
asyncPcmciaIndexThe ifIndex for the modem interface.ro INTEGER .1.3.6.1.4.1.208.45.3.1.1.1 |
asyncPcmciaManufacturerNameThe company name of the modem manufacturer.ro OCTET STRING .1.3.6.1.4.1.208.45.3.1.1.2 |
asyncPcmciaProductNameThe brand name of the modem.ro OCTET STRING .1.3.6.1.4.1.208.45.3.1.1.3 |
asyncPcmciaProductVersionMajorThe modem hardware major version number.ro INTEGER .1.3.6.1.4.1.208.45.3.1.1.4 |
asyncPcmciaProductVersionMinorThe modem hardware minor version number.ro INTEGER .1.3.6.1.4.1.208.45.3.1.1.5 |
asyncPcmciaPcmciaSupportedThis value is yes when the modem can be used with
the router.ro Enumeration .1.3.6.1.4.1.208.45.3.1.1.6 |