SCANET-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SCANET-MIB.
105
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
105 total| Object Name |
|---|
scanet OBJECT IDENTIFIER .1.3.6.1.4.1.208 |
RFC1213-MIB Unknown .1.3.6.1.4.1.208 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.208.1 |
ts-2104 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.12 |
cs-72xx OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.13 |
cs-76xx OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.15 |
cs-14xx OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.32 |
ethernetSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35 |
es-1810 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35.1 |
es-1820 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35.2 |
es10t24 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35.3 |
es10t24plus OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35.4 |
es-1520 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35.5 |
es-1850 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35.6 |
es-1851 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35.7 |
es100fx OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.35.8 |
cs-3300 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.42 |
mfts OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.67 |
cs-21xx OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.68 |
ct-30xx OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.69 |
in-40xx OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.82 |
ct-40xx OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.83 |
matchboxRouter OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88 |
mr-1010 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.1 |
mr-1011 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.2 |
mr-1013 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.3 |
mr-1014 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.4 |
mr-1050 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.5 |
mr-1051 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.6 |
mr-1110 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.7 |
mr-1111 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.8 |
mr-1113 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.9 |
mr-1114 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.10 |
mr-1150 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.11 |
mr-1151 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.12 |
mr-1055 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.13 |
mr-1155 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.14 |
mr-1020 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.15 |
mr-1120 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.16 |
mr-1023 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.17 |
mr-1123 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.18 |
mr-1024 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.19 |
mr-1124 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.20 |
mr-1040 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.21 |
mr-1140 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.22 |
mr-1021 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.23 |
mr-1121 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.24 |
er9100 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.25 |
er9200 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.26 |
er9300 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.27 |
er9400 OBJECT IDENTIFIER .1.3.6.1.4.1.208.1.88.28 |
mib2ext OBJECT IDENTIFIER .1.3.6.1.4.1.208.2 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.1 |
rebootObject to control actions in the device such as:
resetNow(1) is reset the device immediately,
reloadParm(7) is reload parameterblock from FLASH.
saveParm(8) is save the parameter block to FLASH.
Notice that not all products supports all values
of this object.rw Enumeration .1.3.6.1.4.1.208.2.1.1 |
ramThe size of the CPU RAM.ro INTEGER .1.3.6.1.4.1.208.2.1.2 |
idTableA table containing H/W and F/W identification. SEQUENCE OF IdEntry .1.3.6.1.4.1.208.2.1.3 |
idEntryA H/W and F/W information entry for each
set of boards. IdEntry .1.3.6.1.4.1.208.2.1.3.1 |
brdNumberAn index identifying one or more boards.ro INTEGER .1.3.6.1.4.1.208.2.1.3.1.1 |
hwIdH/W identification for the board, ex 10T24.ro DisplayString .1.3.6.1.4.1.208.2.1.3.1.2 |
fwIdF/W identification for the board. ex PROM
version number.ro DisplayString .1.3.6.1.4.1.208.2.1.3.1.3 |
swTableA table af S/W filenames. SEQUENCE OF SwEntry .1.3.6.1.4.1.208.2.1.4 |
swEntryA filename. SwEntry .1.3.6.1.4.1.208.2.1.4.1 |
swNameFilename of S/W.ro DisplayString .1.3.6.1.4.1.208.2.1.4.1.1 |
errorLogNumberNumber of entries in the error log. Setting the
value zero will clear the log. Set of any other
value is invalid.rw INTEGER .1.3.6.1.4.1.208.2.1.5 |
systemLogNumberNumber of entries in the system log. Setting the
value zero will clear the log. Set of any other
value is invalid.rw INTEGER .1.3.6.1.4.1.208.2.1.6 |
autAccessTableAuthorization Access list. A list of all IP
addresses that has passed the authorization.
The access can be from either SNMP, TFTP or Telnet SEQUENCE OF AutAccessEntry .1.3.6.1.4.1.208.2.1.7 |
autAccessEntryAuthorization accept entry. AutAccessEntry .1.3.6.1.4.1.208.2.1.7.1 |
autAccessIPIP address of the host that has
successfully passed the authorization.ro IpAddress .1.3.6.1.4.1.208.2.1.7.1.1 |
autAccessTimeTime of last successfully access.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.208.2.1.7.1.2 |
timeOfDayThe system's Time Of Day. The time is expresed
in seconds since midnight (0 hour), Januar 1, 1970.rw INTEGER .1.3.6.1.4.1.208.2.1.8 |
configurationLastChangedTime Of Day the configuration was last changed.
The time is expresed in seconds since midnight
(0 hour), Januar 1, 1970.ro INTEGER .1.3.6.1.4.1.208.2.1.9 |
configurationLastSavedTime Of Day the configuration was saved to FLASH.
The time is expresed in seconds since midnight
(0 hour), Januar 1, 1970.ro INTEGER .1.3.6.1.4.1.208.2.1.10 |
unsavedConfigurationIndicates if there are unsaved configuration
changes to FLASH. If the value is yes(2) the
configuration has been changed and can be
saved by setting the object reboot to saveParm(8).ro Enumeration .1.3.6.1.4.1.208.2.1.11 |
ip OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.4 |
ipTableThis table is needed to set the IP address and
the IP mask. Refer to the table ipAddrTable
in MIB-II, for a description. SEQUENCE OF IpEntry .1.3.6.1.4.1.208.2.4.1 |
ipEntryEntry with an IP address and an IP mask. IpEntry .1.3.6.1.4.1.208.2.4.1.1 |
ipIndexThe value of an interface indentified
by ifIndex.ro INTEGER .1.3.6.1.4.1.208.2.4.1.1.1 |
ipAddrAndMaskThe IP Address and the Subnet Mask.
The format of the octet string is:
4 bytes : IP Address
4 bytes : IP Subnet Mask.rw OCTET STRING .1.3.6.1.4.1.208.2.4.1.1.2 |
snmp OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.11 |
filterFilter to control logging af events.rwobsolete Enumeration .1.3.6.1.4.1.208.2.11.1 |
printA general object used for SNMP-TRAPS.
Notice that this object for newer products is
obsolete and replaced by unique TRAP's.ro DisplayString .1.3.6.1.4.1.208.2.11.2 |
causeA general object used for SNMP-TRAPS.
Notice that this object for newer products is
obsolete and replaced by unique TRAP's.ro DisplayString .1.3.6.1.4.1.208.2.11.3 |
solutionA general object used for SNMP-TRAPS.
Notice that this object for newer products is
obsolete and replaced by unique TRAP's.ro DisplayString .1.3.6.1.4.1.208.2.11.4 |
autMaxEntriesMaximun number of entries in the autTablero INTEGER .1.3.6.1.4.1.208.2.11.5 |
autTableAuthorization list. SEQUENCE OF AutEntry .1.3.6.1.4.1.208.2.11.6 |
autEntryAuthorization entry. AutEntry .1.3.6.1.4.1.208.2.11.6.1 |
autNumberA number that uniquely identifies an
authorization entry.ro INTEGER .1.3.6.1.4.1.208.2.11.6.1.1 |
autIpAndAccessAndCommunityThis object contains the Ip address (4 byte),
Access (1 byte) and Community (0 to
31 byte). If the Ip address is zero
then any ip address is allowed. The
Access can take the values
readOnly(1) and readWrite(2). If
the community string is zero length,
then any value of community is allowed.rw OCTET STRING .1.3.6.1.4.1.208.2.11.6.1.2 |
autDeleteThe autEntry is removed when set to
1. Allways returns 0rw Enumeration .1.3.6.1.4.1.208.2.11.6.1.3 |
trapMaxEntriesMaximun number of entries in the trapTablero INTEGER .1.3.6.1.4.1.208.2.11.7 |
trapTableHost Trap list. SEQUENCE OF TrapEntry .1.3.6.1.4.1.208.2.11.8 |
trapEntryHost Trap entry. TrapEntry .1.3.6.1.4.1.208.2.11.8.1 |
trapNumberA number that uniquely identifies an
trap entry.ro INTEGER .1.3.6.1.4.1.208.2.11.8.1.1 |
trapIpAndCommunityThis object contains the Ip address
(4 byte) and the Community (0 to 31
byte) used in the Traps.rw OCTET STRING .1.3.6.1.4.1.208.2.11.8.1.2 |
trapDeleteThe trapEntry is removed when set to
1. Allways returns 0rw Enumeration .1.3.6.1.4.1.208.2.11.8.1.3 |
swUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.40 |
swInfoTableSoftware information table. If the product
has a dual software system the table contains
two entries. SEQUENCE OF SwInfoEntry .1.3.6.1.4.1.208.2.40.1 |
swInfoEntrySoftware information entry. SwInfoEntry .1.3.6.1.4.1.208.2.40.1.1 |
swStatusThis object is only used for products
with a dual software system. After loading
and initiating new software the status
is experimental. The software must be
approved to be used after power off.rw Enumeration .1.3.6.1.4.1.208.2.40.1.1.1 |
swName2The software file name (0 to 46 bytes)ro OCTET STRING .1.3.6.1.4.1.208.2.40.1.1.2 |
swLoadTimeThe time the software was loaded and
saved to FLASH.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.208.2.40.1.1.3 |
swTftpIpIP address of the TFTP server from
which the software was loaded.ro IpAddress .1.3.6.1.4.1.208.2.40.1.1.4 |
swTftpIpAndSwNameThis object contains the IP address of the TFTP
server (4 bytes) and the software file name
(0 to 46 bytes). This is used to initiate a
software update.rw OCTET STRING .1.3.6.1.4.1.208.2.40.2 |
swUpdateResultThe result of software update.ro Enumeration .1.3.6.1.4.1.208.2.40.3 |
scaProt OBJECT IDENTIFIER .1.3.6.1.4.1.208.4 |