INTEL-S500-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
140
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
140 total| Object Name |
|---|
s500 OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10 |
INTEL-GEN-MIB Unknown .1.3.6.1.4.1.208.2.10 |
s500PermVioEventThis trap is sent when there has been a permanent entry
violation. A MAC address has been detected at a
port, other than the port where it has been configured as a
permanent entry.
The variable portIfIndex indicates the port where the
MAC incorrectly has been detected.
The problem can be solved by re-configuring the MAC's
permanent entry, or by physically moving the MAC to the
port it has been configured for. TRAP-TYPE .1.3.6.1.4.1.208.2.10.0.1 |
s500AdaptiveForwEventThis trap is sent when a port automatically is
changing forwarding mode. This will only happen when
the port has been configured to Adaptive mode.
The syntax is (Portnumber, New mode, Old mode) TRAP-TYPE .1.3.6.1.4.1.208.2.10.0.2 |
s500TemperatureEventThis trap indicates that the temparature of the
chassis has changed TRAP-TYPE .1.3.6.1.4.1.208.2.10.0.3 |
s500RedundantPowerSupplyEventThis trap indicates that the status of the redundant
power supply has changed TRAP-TYPE .1.3.6.1.4.1.208.2.10.0.4 |
module OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.1 |
defaultSwitchModeDefault switch mode. This is used by the object
portSwitchMode when it's value is default(1)rw Enumeration .1.3.6.1.4.1.208.2.10.1.1 |
defaultFlowControlModeDefault Flow Control mode. This is used by the object
portConfFlowControl when it's value is default(1)rw Enumeration .1.3.6.1.4.1.208.2.10.1.2 |
smuMasterOBSOLETEro Enumeration .1.3.6.1.4.1.208.2.10.1.3 |
localManagementTimeoutThe time (in minutes) that has elapsed before a local
management session (telnet or serial) closes when
it has not been used.
The value '0' means no timeout.rw INTEGER .1.3.6.1.4.1.208.2.10.1.4 |
temperatureLeveltemperatureLevel values:
normal(1) : Temperature normal
high(2) : Temperature high. Check air circulation
critical(3): Temperature critical. Shut down
in 30 secondsro Enumeration .1.3.6.1.4.1.208.2.10.1.5 |
redundantPowerSupplyStatusStatus for redundant power supply:
notPresent(1): RPS not connected or failed. (It
may be present but not plugged in
or damaged etc.)
present(2): RPS not active. (It may be present,
connected, in perfect health, but
just not being used.)
active(3): RPS activero Enumeration .1.3.6.1.4.1.208.2.10.1.6 |
portMirroringenable(1): Enabling of port mirroring. This is only
possible if RMON is disabled.
disable(2): Disabling of port mirroring.
RMON can only be enabled if port mirroring is disabledrw Enumeration .1.3.6.1.4.1.208.2.10.1.7 |
disableRmondestroyAll(1): Disable RMON and destroy all
probes. This is necessary for enabling port mirroringrw Enumeration .1.3.6.1.4.1.208.2.10.1.8 |
isRmonActiveenabled(1): RMON is enabled
disabled(2): RMON is disabledro Enumeration .1.3.6.1.4.1.208.2.10.1.9 |
switchTotalTrafficTotal switch traffic measured in octetsro Counter .1.3.6.1.4.1.208.2.10.1.10 |
bufferPoolUsedTotal switch buffer pool usage.
(percentage between 0 and 100)ro INTEGER .1.3.6.1.4.1.208.2.10.1.11 |
featuresBitFlagBit field index from bit 1 to 32. If an bit is
set, the switch supports the related feature.
BIT 1: Distributed VLAN
BIT 2: Layer 3 switching
BIT 3: Diagnostics
BIT 4: RSVP
BIT 5: IP multicast
BIT 6: IP filtering
BIT 7: ATM STP
BIT 8: Port trunking
BIT 9: Port mirroring
BIT 10: VLAN stacking
BIT 11: Forwarding of learn packets
BIT 12: IGMP pruning
BIT 13: ToS
BIT 14: Bulk En-/Disable STP
BIT 15: VLAN table flush
BIT 16: Transparent Cache
BIT 17: Compressed Stackro OCTET STRING .1.3.6.1.4.1.208.2.10.1.12 |
switchBwMax switch BW. (Mbits per second)ro INTEGER .1.3.6.1.4.1.208.2.10.1.13 |
ownMatrixAttachmentPortReturns the port number of the Matrix port the
switch is attached to. NB: will return 50 for
a switch not connected to a Matrix Modulero INTEGER .1.3.6.1.4.1.208.2.10.1.14 |
stackCrcchecksum for stack specific parameters
If a parameter is unavailable 0 is returnedro INTEGER .1.3.6.1.4.1.208.2.10.1.15 |
ports OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.2 |
portSnmpPortReturns the port which this SNMP request went
through. This gives the port on which the SNMP
management system is connected.ro INTEGER .1.3.6.1.4.1.208.2.10.2.1 |
portLastChangeThe value of sysUpTime after any interface
has changed statero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.208.2.10.2.2 |
portInfoTablePort information table which includes all ports. SEQUENCE OF PortInfoEntry .1.3.6.1.4.1.208.2.10.2.3 |
portInfoEntryContains the type of interface . PortInfoEntry .1.3.6.1.4.1.208.2.10.2.3.1 |
portInfoChassisIndexChassis indexro INTEGER .1.3.6.1.4.1.208.2.10.2.3.1.1 |
portInfoModuleIndexModule indexro INTEGER .1.3.6.1.4.1.208.2.10.2.3.1.2 |
portInfoIndexAn index value that uniquely identifies
an interface. The interface identified by
a particular value of this index is the
same interface as identified by the same
value of ifIndex.ro INTEGER .1.3.6.1.4.1.208.2.10.2.3.1.3 |
portInfoTypeThe type of Physical interface at the port.ro Enumeration .1.3.6.1.4.1.208.2.10.2.3.1.4 |
portConfTablePort configuration and status table. SEQUENCE OF PortConfEntry .1.3.6.1.4.1.208.2.10.2.4 |
portConfEntryAn entry containing the objects for
configuration and status of a port. PortConfEntry .1.3.6.1.4.1.208.2.10.2.4.1 |
portConfChassisIndexChassis indexro INTEGER .1.3.6.1.4.1.208.2.10.2.4.1.1 |
portConfModuleIndexModule indexro INTEGER .1.3.6.1.4.1.208.2.10.2.4.1.2 |
portConfIndexAn index value that uniquely identifies
an interface. The interface identified by
a particular value of this index is the
same interface as identified by the same
value of ifIndex.ro INTEGER .1.3.6.1.4.1.208.2.10.2.4.1.3 |
portConfDescrUser configurable description of the port.rw DisplayString .1.3.6.1.4.1.208.2.10.2.4.1.4 |
portConfLocationUser configurable location of the port.rw DisplayString .1.3.6.1.4.1.208.2.10.2.4.1.5 |
portConfConfigSwitchModePort Switch mode. If set to default(1) the
value from defaultSwitchMode is used.rw Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.6 |
portConfFlowControlPort Flow Control mode. If set to
default(1) the value from
defaultFlowControlMode is used.rw Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.7 |
portConfSpeedSupportedThe possible speeds of a portro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.8 |
portConfDuplexSupportedThe possible duplex modes of a portro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.9 |
portConfConfigSpeedThe configured speed for a portrw Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.10 |
portConfConfigDuplexThe configured duplex mode for a portrw Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.11 |
portConfConfigAutoNegThe configured auto-negotiation for a portrw Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.12 |
portConfSpeedThe current speed for a portro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.13 |
portConfDuplexThe current duplex mode for a portro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.14 |
portConfAutoNegThe currect auto-negotiation for a portro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.15 |
portConfSwitchModeCurrent forwarding mode of the port.ro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.16 |
portConfTrunkSupportedThe types of port trunking available for
the actual port. A trunk consists of a
number ports sitting next to each
other. The first port is selected as
master for the trunk, the following as slaves.
trunkWidthTwo(1): Port is available as
master for 2 port trunking.
trunkWidthFour(2): Port is available as
master for 4 port trunking.
trunkMaster(3): Port is master in a trunk.
trunkSlave(4): Port is slave in a trunk.
notAvailable(99): Port is not available
for trunking.ro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.17 |
portConfTrunkConfigThe size of the actual trunk. 0 means
trunkWidthTwo(1): This port is member of
a 2 port trunk.
trunkWidthFour(2):This port is member of
a 4 port trunk.
disable(99): This port is not trunkedrw Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.18 |
portConfTrunkNameTrunk namerw DisplayString .1.3.6.1.4.1.208.2.10.2.4.1.19 |
portConfMirrorSupportedWhich mode of port mirroring does the port
support.
mirrorSourceOnly(1): Port can only be
used as source for mirroring
mirrorDestinationOnly(2): Port can only be
used as destination for mirroring
mirrorSourceOrDestination(3): Port can
be used as source or destination
notAvailable(99): Port can not be used
for mirroringro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.20 |
portConfMirrorConfigThe configured port mirroring for
the actual port.
mirrorSource(1): Port is source for
mirroring
mirrorDestination(2): Port is
destination for mirroring
disabled(99): Port is not mirroredrw Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.21 |
portConfVlanSupportedDescribes if the port can be used as a port
rule in the VLAN configuration.
enabled(1): Port can be used in port
VLANs
notAvailable(99): Port can not be used
in port VLANsro Enumeration .1.3.6.1.4.1.208.2.10.2.4.1.22 |
portAllSpanningTreeModeEnable or Disable Spanning Tree Protocol for
all ports on switch.
SET is only allowed with value allEnabled(1) or
allDisabled(2).rw Enumeration .1.3.6.1.4.1.208.2.10.2.5 |
statistic OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.3 |
txStatTableTransmit statistics table. SEQUENCE OF TxStatEntry .1.3.6.1.4.1.208.2.10.3.1 |
txStatEntryAn entry containing objects for
transmit statistics. TxStatEntry .1.3.6.1.4.1.208.2.10.3.1.1 |
txStatIndexAn index value that uniquely identifies
an interface. The interface identified by
a particular value of this index is the
same interface as identified by the same
value of ifIndex.ro INTEGER .1.3.6.1.4.1.208.2.10.3.1.1.1 |
txUCPkts64Octets64 byte unicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.2 |
txUCPkts65To127Octets65 to 127 byte unicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.3 |
txUCPkts128To255Octets128 to 255 byte unicast packets
transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.4 |
txUCPkts256To511Octets256 to 511 byte unicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.5 |
txUCPkts512To1023Octets512 to 1023 byte unicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.6 |
txUCPkts1024To1518Octets1024 to 1518 byte unicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.7 |
txMCPkts64Octets64 byte multicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.8 |
txMCPkts65To127Octets65 to 127 byte multicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.9 |
txMCPkts128To255Octets128 to 255 byte multicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.10 |
txMCPkts256To511Octets256 to 511 byte multicast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.11 |
txMCPkts512To1023Octets512 to 1023 byte multicast packets
transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.12 |
txMCPkts1024To1518Octets1024 to 1518 byte multicast packets
transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.13 |
txBCPkts64Octets64 byte broadcast packets transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.14 |
txBCPkts65To127Octets65 to 127 byte broadcast packets
transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.15 |
txBCPkts128To255Octets128 to 255 byte broadcast packets
transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.16 |
txBCPkts256To511Octets256 to 511 byte broadcast packets
transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.17 |
txBCPkts512To1023Octets512 to 1023 byte broadcast packets
transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.18 |
txBCPkts1024To1518Octets1024 to 1518 byte broadcast packets
transmittedro Counter .1.3.6.1.4.1.208.2.10.3.1.1.19 |
totalRxTxPacketsThis object is used for LED control to
display traffic. Values in the string are
all packets transmitted and received at
each port. The number and order of values
equals the ifIndex, however only physical
ports are included in the array. Each
entry is 4 bytes. The first 4 bytes of
the string is the value of portLastChange.ro OCTET STRING .1.3.6.1.4.1.208.2.10.3.3 |
totalCollisionsThis object is used for LED control to
display collision. Values in the string
are the total collisions at each
port. The number and order of values
equals the ifIndex, however only physical
ports are included in the array. Each
entry is 4 bytes. The first 4 bytes of
the string is the value of portLastChange.ro OCTET STRING .1.3.6.1.4.1.208.2.10.3.4 |
adaptiveForwardMode OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.4 |
adaptiveForwardModeSampleTimeSpecify how long (in seconds) the received
packets will be monitored. The resulting
forwarding mode will be based on the quality of
the packetsrw INTEGER .1.3.6.1.4.1.208.2.10.4.1 |
adaptiveForwardModeRuntsOffsetSpecifies the minimum amount of runts during the
sample time which forces the port out of
cutThrough(2). The value is specified in per mill
* 1000rw INTEGER .1.3.6.1.4.1.208.2.10.4.2 |
adaptiveForwardModeRuntsRangeSpecifies (together with
adaptiveForwardModeRuntsOffset) the maximum amount
of runts allowed during the sample time. This
forces the port back to cutThrough(2). The value is
specified in per mill * 1000rw INTEGER .1.3.6.1.4.1.208.2.10.4.3 |
adaptiveForwardModeCrcsOffsetSpecifies the maximum amount of CRC errors during
the sample time. This forces the port out of
Store-and-Forward. The value is specified in per mill *
1000rw INTEGER .1.3.6.1.4.1.208.2.10.4.4 |
adaptiveForwardModeCrcsRangeSpecifies together with
adaptiveForwardModeCrcsOffset the maximum amount
of CRC errors during the sample time. This forces
the port out of Store-and-Forward. The value is
specified in per mill * 1000rw INTEGER .1.3.6.1.4.1.208.2.10.4.5 |
chipSets OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.5 |
smu OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.6 |
smuModuleTableNot implemented yet SEQUENCE OF SmuModuleEntry .1.3.6.1.4.1.208.2.10.6.1 |
smuModuleEntryNot implemented yet SmuModuleEntry .1.3.6.1.4.1.208.2.10.6.1.1 |
smuModuleChassisIndexNot implemented yetro INTEGER .1.3.6.1.4.1.208.2.10.6.1.1.1 |
smuModuleIndexNot implemented yetro INTEGER .1.3.6.1.4.1.208.2.10.6.1.1.2 |
smuModuleStateNot implemented yetro INTEGER .1.3.6.1.4.1.208.2.10.6.1.1.3 |
smuPortTableNot implemented yet SEQUENCE OF SmuPortEntry .1.3.6.1.4.1.208.2.10.6.2 |
smuPortEntryNot implemented yet SmuPortEntry .1.3.6.1.4.1.208.2.10.6.2.1 |
smuPortChassisIndexNot implemented yetro INTEGER .1.3.6.1.4.1.208.2.10.6.2.1.1 |
smuPortModuleIndexNot implemented yetro INTEGER .1.3.6.1.4.1.208.2.10.6.2.1.2 |
smuPortIndexNot implemented yetro INTEGER .1.3.6.1.4.1.208.2.10.6.2.1.3 |
smuPortAttachedNumberNot implemented yetro INTEGER .1.3.6.1.4.1.208.2.10.6.2.1.4 |
smuPortAttachedMacNot implemented yetro OCTET STRING .1.3.6.1.4.1.208.2.10.6.2.1.5 |
smuPortAttachedIpNot implemented yetro IpAddress .1.3.6.1.4.1.208.2.10.6.2.1.6 |
permanentEntries OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.7 |
permanentEntriesTable SEQUENCE OF PermanentEntriesEntry .1.3.6.1.4.1.208.2.10.7.1 |
permanentEntriesEntry PermanentEntriesEntry .1.3.6.1.4.1.208.2.10.7.1.1 |
permanentEntriesMACAddrMAC address of permanent entry.rw OCTET STRING .1.3.6.1.4.1.208.2.10.7.1.1.1 |
permanentEntriesPortIdPort number for permanent entry.rw INTEGER .1.3.6.1.4.1.208.2.10.7.1.1.2 |
permanentEntriesCreateObjCreate a non-existant table entry. If
the entry already exists, genError is
returned.
Format: PortId (INTEGER)rw INTEGER .1.3.6.1.4.1.208.2.10.7.1.1.3 |
permanentEntriesDeleteObjDelete an existing table entry.rw Enumeration .1.3.6.1.4.1.208.2.10.7.1.1.4 |
matrix OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.8 |
matrixModuleTableThe table for general stack information SEQUENCE OF MatrixModuleEntry .1.3.6.1.4.1.208.2.10.8.1 |
matrixModuleEntryInformation for a specific module slot
about stackconnections, state, masterinformation MatrixModuleEntry .1.3.6.1.4.1.208.2.10.8.1.1 |
matrixModuleIndexSlot number to retrieve information for.
1 is slot A, 2 is slot Bro INTEGER .1.3.6.1.4.1.208.2.10.8.1.1.1 |
matrixModuleStateState of the matrix module. If
notAvailable(99) no matrix module can be seen,
active(1) is indicating a running module,
standby(2) is indicating a module that is
ready to become active if needed in a
redundant setup,
error(3) indicates a stack/redundancy
error,
back(4) is id the SIM module is running
in a back to back configurationro Enumeration .1.3.6.1.4.1.208.2.10.8.1.1.2 |
matrixNumberConnectedThe number of connected units to the
matrix modulero INTEGER .1.3.6.1.4.1.208.2.10.8.1.1.3 |
matrixMasterPort0 means no master available, otherwise
an ifindex is returned (50->57)ro INTEGER .1.3.6.1.4.1.208.2.10.8.1.1.4 |
matrixPortTableMatrix module per port overview. SEQUENCE OF MatrixPortEntry .1.3.6.1.4.1.208.2.10.8.2 |
matrixPortEntryPer switch of information gathered
from the matrix module about the connected
devices MatrixPortEntry .1.3.6.1.4.1.208.2.10.8.2.1 |
matrixPortModuleIndexSlot number to retrieve information for.
1 is slot A, 2 is slot Bro INTEGER .1.3.6.1.4.1.208.2.10.8.2.1.1 |
matrixPortIndexIndex for retrieving the matrix portsro INTEGER .1.3.6.1.4.1.208.2.10.8.2.1.2 |
matrixPort0 means no device is available, otherwise
an ifindex is returned (50->57)ro INTEGER .1.3.6.1.4.1.208.2.10.8.2.1.3 |
matrixPortTypeThe connected device type,
notAvailable(99) if unknown or nonero Enumeration .1.3.6.1.4.1.208.2.10.8.2.1.4 |
matrixPortMajVerMajor Version of matrix module shared memory
layout supportedro INTEGER .1.3.6.1.4.1.208.2.10.8.2.1.5 |
matrixPortMinVerMinor Version of matrix module shared memory
layout supportedro INTEGER .1.3.6.1.4.1.208.2.10.8.2.1.6 |
matrixPortMacMac address of the device connected to a
specific matrix port. If the device does
not have a mac address it will be zeroro OCTET STRING .1.3.6.1.4.1.208.2.10.8.2.1.7 |
matrixPortIpIP address of the device connected to a
specific matrix port. If the device does
not have an IP address it will be zerorw IpAddress .1.3.6.1.4.1.208.2.10.8.2.1.8 |
matrixPortSubnetMaskIP subnet mask of the device connected
to a specific matrix port.rw IpAddress .1.3.6.1.4.1.208.2.10.8.2.1.9 |
matrixPortGatewayIP gateway of the device connected
to a specific matrix port.rw IpAddress .1.3.6.1.4.1.208.2.10.8.2.1.10 |
matrixLastChangeTimestamp for last change in matrix tables on any
Matrix modulero TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.208.2.10.8.3 |
mediamodules OBJECT IDENTIFIER .1.3.6.1.4.1.208.2.10.9 |
mediaModuleTablePossible values of indices are
1..moduleMaxMediaModules SEQUENCE OF MediaModuleEntry .1.3.6.1.4.1.208.2.10.9.1 |
mediaModuleEntryPossible values of indices are
1..stackMaxChassis, 1..chassisMaxModules
and 1..moduleMaxMediaModules MediaModuleEntry .1.3.6.1.4.1.208.2.10.9.1.1 |
moduleModeHardware mode for media module.
Stack mode is 1 (connected to stack),
Stand alone mode is 2 (connected to switch).rw Enumeration .1.3.6.1.4.1.208.2.10.9.1.1.1 |
matrixAttachmentPortReturns the port number of the Matrix port the
uplink mmodule is attached to. NB: will return 50 for
a uplink module not connected to a Matrix Modulero INTEGER .1.3.6.1.4.1.208.2.10.9.1.1.2 |
mediaModuleChangeThe value of sysUpTime after any mediamoduletype
has changedro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.208.2.10.9.2 |
txOctetsIllegalAddrTypeInternal error
::= { txStatEntry 20 }
tx1ArbitFrameDelay OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTIONro Counter .1.3.6.1.4.1.208.39.4.2.1.55 |
rxCodeViolationsAn illegal symbol received on a
100Base-X port.ro Counter .1.3.6.1.4.1.208.39.4.2.1.56 |
rxJabberErrorsRx packets that are too long and
contains CRC errors and/or dribble nibble.ro Counter .1.3.6.1.4.1.208.39.4.2.1.57 |
rxNiaOverRunDropErrorsThe NIA Rx buffer goes to overrun if
the nimbus is overloaded (NIA10 only).ro Counter .1.3.6.1.4.1.208.39.4.2.1.58 |
rxAllCounterPacketsA collection of all counters for byte
and packet counters. This object is
needed to optimise SNMP traffic. The
counters in this string are:
rxStatIndex INTEGER
rxOctetsLocalHis Counter
rxOctetsLocalLos Counter
rxOctetsForwardedHis Counter
rxOctetsForwardedLos Counter
rxUCPkts64OctetsLocals Counter
rxUCPkts64OctetsForwardeds Counter
rxUCPkts65To127OctetsLocals Counter
rxUCPkts65To127OctetsForwardeds Counter
rxUCPkts128To255OctetsLocals Counter
rxUCPkts128To255OctetsForwardeds Counter
rxUCPkts256To511OctetsLocals Counter
rxUCPkts256To511OctetsForwardeds Counter
rxUCPkts512To1023OctetsLocals Counter
rxUCPkts512To1023OctetsForwardeds Counter
rxUCPkts1024To1518OctetsLocals Counter
rxUCPkts1024To1518OctetsForwardeds Counter
rxMCPkts64OctetsLocals Counter
rxMCPkts64OctetsForwardeds Counter
rxMCPkts65To127OctetsLocals Counter
rxMCPkts65To127OctetsForwardeds Counter
rxMCPkts128To255OctetsLocals Counter
rxMCPkts128To255OctetsForwardeds Counter
rxMCPkts256To511OctetsLocals Counter
rxMCPkts256To511OctetsForwardeds Counter
rxMCPkts512To1023OctetsLocals Counter
rxMCPkts512To1023OctetsForwardeds Counter
rxMCPkts1024To1518OctetsLocals Counter
rxMCPkts1024To1518OctetsForwardeds Counter
rxBCPkts64OctetsLocals Counter
rxBCPkts64OctetsForwardeds Counter
rxBCPkts65To127OctetsLocals Counter
rxBCPkts65To127OctetsForwardeds Counter
rxBCPkts128To255OctetsLocals Counter
rxBCPkts128To255OctetsForwardeds Counter
rxBCPkts256To511OctetsLocals Counter
rxBCPkts256To511OctetsForwardeds Counter
rxBCPkts512To1023OctetsLocals Counter
rxBCPkts512To1023OctetsForwardeds Counter
rxBCPkts1024To1518OctetsLocals Counter
rxBCPkts1024To1518OctetsForwardeds Counter
The values are represented in the OCTET
STRING in the listed order. Each value
stored as a 32 bits big engine value.ro OCTET STRING .1.3.6.1.4.1.208.39.4.2.1.59 |
rxAllCounterOthersA collection of all counters other than
for byte and packet counters. This object is
needed to optimize SNMP traffic. The
counters in this string are:
rxStatIndex INTEGER
rxShortErrors Counter
rxRuntErrors Counter
rxDataRateMMErrors Counter
rxFilterMACUnexp2ndPortDrops Counter
rxFilterIllegalMACDrops Counter
rxVeryLongErrors Counter
rxLongErrors Counter
rxCodeViolation Counter
rxJabberErrors Counter
rxAlignErrors Counter
rxFCSErrors Counter
The values are represented in the OCTET
STRING in the listed order, each value
stored as a 32 bits big engine value.ro OCTET STRING .1.3.6.1.4.1.208.39.4.2.1.60 |