ASCEND-SDSL-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-SDSL-MIB.
39
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
39 total| Object Name |
|---|
ASCEND-WAN-MIBSDSL status parameters. SEQUENCE OF SdslLineStatusEntry .1.3.6.1.4.1.529.4.8.1 |
sdslLineStatisticTableSDSL statistical parameters. SEQUENCE OF SdslLineStatisticEntry .1.3.6.1.4.1.529.4.8.2 |
sdslLineStatisticEntryAn interface statistical entry containing objects to
describe the interface. SdslLineStatisticEntry .1.3.6.1.4.1.529.4.8.2.1 |
sdslStatIfEntryIndexThe interface groups interface index is used
to index into this table.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.1 |
sdslStatShelfIndexSDSL modules Shelf ID.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.2 |
sdslStatSlotIndexSDSL modules Slot ID.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.3 |
sdslStatLineIndexSDSL modules interface ID.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.4 |
sdslStatConnUpDaysConnection up day count.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.5 |
sdslStatConnUpHoursConnection Up 24 hour count.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.6 |
sdslStatConnUpMinutesConnection up minute count.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.7 |
sdslStatRxSignalPresentReceive signal present detection.ro Enumeration .1.3.6.1.4.1.529.4.8.2.1.8 |
sdslStatLineQualityDbLines noise margin. Reliable data will transfer
with a reading of -5db or greater.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.9 |
sdslStatUpDwnCntrLine Up Down counter value displays the number
of times the interface transitions from a down to up
state.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.10 |
sdslStatLineSelfTestLine hardware self test results (Passed or
Failed).ro Enumeration .1.3.6.1.4.1.529.4.8.2.1.11 |
sdslStatBertTimerBER test duration configuration. The BER test lasts for the
duration of this timer.rw Enumeration .1.3.6.1.4.1.529.4.8.2.1.12 |
sdslStatBertEnaEnable/disable of the BER test. If nodes are
connected, then the BER test is ran between the
units. If this node is not connected to a remote
node, then the interface is placed into analog
loopback and the BER test is started.rw Enumeration .1.3.6.1.4.1.529.4.8.2.1.13 |
sdslStatBertStateBER test states. When this node is not connected to
another node, the test is disabled. When two nodes are connected
then the BER test waits for the other node to start it's BER test and
then starts collecting bit errors immediately.ro Enumeration .1.3.6.1.4.1.529.4.8.2.1.14 |
sdslStatBertErrorCounterBER test bit error counter.ro INTEGER .1.3.6.1.4.1.529.4.8.2.1.15 |
sdslLineConfigTableSDSL status parameters. SEQUENCE OF SdslLineConfigEntry .1.3.6.1.4.1.529.4.8.3 |
sdslLineConfigEntryAn interface status entry containing objects to describe the
interface. SdslLineConfigEntry .1.3.6.1.4.1.529.4.8.3.1 |
sdslConfigIfEntryIndexInterface group index assigned to this port.ro INTEGER .1.3.6.1.4.1.529.4.8.3.1.1 |
sdslConfigShelfIndexTNT's SDSL modules Shelf ID.ro INTEGER .1.3.6.1.4.1.529.4.8.3.1.2 |
sdslConfigSlotIndexTNT's SDSL modules Slot ID.ro INTEGER .1.3.6.1.4.1.529.4.8.3.1.3 |
sdslConfigLineIndexSDSL modules line ID.ro INTEGER .1.3.6.1.4.1.529.4.8.3.1.4 |
sdslConfigLineRateThe current line raterw Enumeration .1.3.6.1.4.1.529.4.8.3.1.5 |
sdslLineStatusEntryAn interface status entry containing objects to describe the
interface. SdslLineStatusEntry .sdslLineStatusTable.1 |
sdslStatusIfEntryIndexInterface group index assigned to this port.ro INTEGER .sdslLineStatusTable.1.1 |
sdslStatusShelfIndexTNT's SDSL modules Shelf ID.ro INTEGER .sdslLineStatusTable.1.2 |
sdslStatusSlotIndexTNT's SDSL modules Slot ID.ro INTEGER .sdslLineStatusTable.1.3 |
sdslStatusLineIndexSDSL modules line ID.ro INTEGER .sdslLineStatusTable.1.4 |
sdslStatusUnitTypeUnit type defines if the unit is operating either as a
Central Office Equipment (COE) or Customer Premiss
equipment (CPE).ro Enumeration .sdslLineStatusTable.1.5 |
sdslStatusLineStateInterface state describes the current ports
operating state. States are: Config, Pend Down,
Up, Down, Start-up, or N/A.ro Enumeration .sdslLineStatusTable.1.6 |
sdslStatusUpRateThe current up stream (cpe to coe) rate
The object dslStatusUpRate is deprecated.
To set line rate the object sdslConfigLineRate
of the new sdslLineConfigTable should be used.rwdeprecated Enumeration .sdslLineStatusTable.1.7 |
sdslStatusDownRateThe current down stream (coe to cpe) rate
The object dslStatusDownRate is deprecated.
To set line rate the object sdslConfigLineRate
of the new sdslLineConfigTable should be used.rwdeprecated Enumeration .sdslLineStatusTable.1.8 |
sdslStatusVendorIdVendor identification.ro INTEGER .sdslLineStatusTable.1.9 |
sdslStatusMajorFirmWareVerMajor firmware version.ro INTEGER .sdslLineStatusTable.1.10 |
sdslStatusMinorFirmWareVerMinor firmware version.ro INTEGER .sdslLineStatusTable.1.11 |
sdslStatusHardWareVerHardware version.ro INTEGER .sdslLineStatusTable.1.12 |
sdslStatusLineRateThe current line ratero Enumeration .sdslLineStatusTable.1.13 |