ASCEND-HDSL2-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-HDSL2-MIB.
37
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
37 total| Object Name |
|---|
ASCEND-WAN-MIBHDSL2 status parameters. SEQUENCE OF Hdsl2LineStatusEntry .1.3.6.1.4.1.529.4.12.1 |
hdsl2LineStatisticTableHDSL2 statistical parameters. SEQUENCE OF Hdsl2LineStatisticEntry .1.3.6.1.4.1.529.4.12.2 |
hdsl2LineStatisticEntryA interface statistical entry containing objects to
describe the interface. Hdsl2LineStatisticEntry .1.3.6.1.4.1.529.4.12.2.1 |
hdsl2StatIfEntryIndexThe interface groups interface index is used
to index into this table.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.1 |
hdsl2StatShelfIndexHDSL2 modules Shelf ID.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.2 |
hdsl2StatSlotIndexHDSL2 modules Slot ID.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.3 |
hdsl2StatLineIndexHDSL2 modules interface ID.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.4 |
hdsl2StatConnUpDaysConnection up day count.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.5 |
hdsl2StatConnUpHoursConnection Up 24 hour count.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.6 |
hdsl2StatConnUpMinutesConnection up minute count.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.7 |
hdsl2StatRxSignalPresentReceive signal present detection.ro Enumeration .1.3.6.1.4.1.529.4.12.2.1.8 |
hdsl2StatLineQualityDbLines noise margin. Reliable data will transfer
with a reading of ??? or greater.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.9 |
hdsl2StatUpDwnCntrLine Up Down counter value displays the number
of times the interface transitions from a down to up
state.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.10 |
hdsl2StatLineSelfTestLine hardware self test results (Passed or
Failed).ro Enumeration .1.3.6.1.4.1.529.4.12.2.1.11 |
hdsl2StatTxPowerLines transmit power.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.4.12.2.1.12 |
hdsl2StatFramerCrcErrorsLines framer CRC errors.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.4.12.2.1.13 |
hdsl2StatFramerSyncStatusLines framer sync status .ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.4.12.2.1.14 |
hdsl2StatFramerLosdCntLines framer ???.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.4.12.2.1.15 |
hdsl2StatFramerSegaCntLines framer ???.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.4.12.2.1.16 |
hdsl2StatFramerSegdCntLines framer ???.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.4.12.2.1.17 |
hdsl2StatFramerRxHecErrorsLines framer ???.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.4.12.2.1.18 |
hdsl2StatBertTimerBER test duration configuration. The BER test lasts for the
duration of this timer.rw Enumeration .1.3.6.1.4.1.529.4.12.2.1.19 |
hdsl2StatBertEnaEnable/disable of the BER test. If nodes are
connected, then the BER test is ran between the
units. If this node is not connected to a remote
node, then the interface is placed into analog
loopback and the BER test is started.rw Enumeration .1.3.6.1.4.1.529.4.12.2.1.20 |
hdsl2StatBertStateBER test states. When this node is not connected to
another node, the test is disabled. When two nodes are connected
then the BER test waits for the other node to start it's BER test and
then starts collecting bit errors immediately.ro Enumeration .1.3.6.1.4.1.529.4.12.2.1.21 |
hdsl2StatBertErrorCounterBER test bit error counter.ro INTEGER .1.3.6.1.4.1.529.4.12.2.1.22 |
hdsl2LineStatusEntryA interface status entry containing objects to describe the
interface. Hdsl2LineStatusEntry .hdsl2LineStatusTable.1 |
hdsl2StatusIfEntryIndexInterface group index assigned to this port.ro INTEGER .hdsl2LineStatusTable.1.1 |
hdsl2StatusShelfIndexTNT's HDSL2 modules Shelf ID.ro INTEGER .hdsl2LineStatusTable.1.2 |
hdsl2StatusSlotIndexTNT's HDSL2 modules Slot ID.ro INTEGER .hdsl2LineStatusTable.1.3 |
hdsl2StatusLineIndexHDSL2 modules line ID.ro INTEGER .hdsl2LineStatusTable.1.4 |
hdsl2StatusUnitTypeUnit type defines if the unit is operating either as a
Central Office Equipment (COE) or Customer Premiss
equipment (CPE).ro Enumeration .hdsl2LineStatusTable.1.5 |
hdsl2StatusLineStateInterface state describes the current ports
operating state. States are: Config, Pend Down,
Up, Down, Start-up, or N/A.ro Enumeration .hdsl2LineStatusTable.1.6 |
hdsl2StatusOpRateThe current symetrical operation raterw Enumeration .hdsl2LineStatusTable.1.7 |
hdsl2StatusVendorIdVendor identification.ro INTEGER .hdsl2LineStatusTable.1.8 |
hdsl2StatusMajorFirmWareVerMajor firmware version.ro INTEGER .hdsl2LineStatusTable.1.9 |
hdsl2StatusMinorFirmWareVerMinor firmware version.ro INTEGER .hdsl2LineStatusTable.1.10 |
hdsl2StatusHardWareVerHardware version.ro INTEGER .hdsl2LineStatusTable.1.11 |