ASCEND-ADSL-CAP-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ASCEND-ADSL-CAP-MIB.
31
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
ASCEND-WAN-MIBADSL CAP status parameters. SEQUENCE OF AdslCapLineStatusEntry .1.3.6.1.4.1.529.4.9.1 |
adslCapLineStatisticTableADSL CAP statistical parameters. SEQUENCE OF AdslCapLineStatisticEntry .1.3.6.1.4.1.529.4.9.2 |
adslCapLineStatisticEntryA interface statistical entry containing objects to
describe the interface. AdslCapLineStatisticEntry .1.3.6.1.4.1.529.4.9.2.1 |
adslCapStatIfEntryIndexIndex into the Status Table via the interface group
ifIndex value.ro INTEGER (1..'7fffffff'h) .1.3.6.1.4.1.529.4.9.2.1.1 |
adslCapStatShelfIndexADSL CAP modules Shelf ID.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.2 |
adslCapStatSlotIndexADSL CAP modules Slot ID.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.3 |
adslCapStatLineIndexADSL CAP modules interface ID.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.4 |
adslCapStatConnUpDaysConnection up day count.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.5 |
adslCapStatConnUpHoursConnection Up 24 hour count.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.6 |
adslCapStatConnUpMinutesConnection up minute count.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.7 |
adslCapStatRxSignalPresentReceive signal present detection.ro Enumeration .1.3.6.1.4.1.529.4.9.2.1.8 |
adslCapStatLineQualityDbLines noise margin. Reliable data will transfer
with a reading of -5db or greater.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.9 |
adslCapStatUpDwnCntrLine Up Down counter value displays the number
of times the interface transitions from a down to up
state.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.10 |
adslCapStatLineSelfTestLine hardware self test results (Passed or
Failed).ro Enumeration .1.3.6.1.4.1.529.4.9.2.1.11 |
adslCapStatBertTimerBER test duration configuration. When two nodes are
physically connected, the BER test lasts for the
duration of this timer.rw Enumeration .1.3.6.1.4.1.529.4.9.2.1.12 |
adslCapStatBertEnaEnable/disable of the BER test. If nodes are
connected, then the BER test is ran between the
units. If this node is not connected to a remote
node, then the interface is placed into analog
loopback and the BER test is started.rw Enumeration .1.3.6.1.4.1.529.4.9.2.1.13 |
adslCapStatBertStateBER test states. When this node is not connected to
anyother node, then the state enters
local-loop-active. When two nodes are conneced then
different states are transistioned through. If this
is the first node to enable the BER test, the state
will transistion from stopped to
waiting-for-511-sync. Now this node is waiting for
the remote node to enable its BER test. Once the
remote node enables its BER test, then both nodes
enter the active state. At this point the BER test
starts collecting bit errors.ro Enumeration .1.3.6.1.4.1.529.4.9.2.1.14 |
adslCapStatBertErrorCounterBER test bit error counter.ro INTEGER .1.3.6.1.4.1.529.4.9.2.1.15 |
adslCapLineStatusEntryA interface status entry containing objects to describe the
interface. AdslCapLineStatusEntry .adslCapLineStatusTable.1 |
adslCapStatusIfEntryIndexIndex into the Status Table via the interface group
ifIndex value.ro INTEGER (1..'7fffffff'h) .adslCapLineStatusTable.1.1 |
adslCapStatusShelfIndexTNT's ADSL CAP modules Shelf ID.ro INTEGER .adslCapLineStatusTable.1.2 |
adslCapStatusSlotIndexTNT's ADSL CAP modules Slot ID.ro INTEGER .adslCapLineStatusTable.1.3 |
adslCapStatusLineIndexADSL CAP modules line ID.ro INTEGER .adslCapLineStatusTable.1.4 |
adslCapStatusUnitTypeUnit type defines if the unit is operating either as a
Central Office Equipment (COE) or Customer Premiss
equipment (CPE).ro Enumeration .adslCapLineStatusTable.1.5 |
adslCapStatusLineStateInterface state describes the current ports
operating state. States are: Config, Pend Down,
Up, Down, Start-up, or N/A.ro Enumeration .adslCapLineStatusTable.1.6 |
adslCapStatusUpRateWhen parameter is read, it displays the
current up stream (cpe to coe) rate which can
differ from the written value.rw Enumeration .adslCapLineStatusTable.1.7 |
adslCapStatusDownRateWhen parameter is read, it displays the
current down stream (coe to cpe) rate which can
differ from the written value.rw Enumeration .adslCapLineStatusTable.1.8 |
adslCapStatusVendorIdVendor identification.ro INTEGER .adslCapLineStatusTable.1.9 |
adslCapStatusMajorFirmWareVerMajor firmware version.ro INTEGER .adslCapLineStatusTable.1.10 |
adslCapStatusMinorFirmWareVerMinor firmware version.ro INTEGER .adslCapLineStatusTable.1.11 |
adslCapStatusHardWareVerHardware version.ro INTEGER .adslCapLineStatusTable.1.12 |