AS-2000
AI MIB Summary
Standard SNMP MIB module defining data structures for AS-2000.
254
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
254 total| Object Name |
|---|
lucent OBJECT IDENTIFIER .1.3.6.1.4.1.1751 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1751 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1 |
orinocoProducts OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.4 |
as2000Product OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.4.4 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2 |
orinoco OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4 |
as2000 OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3 |
orinocoInterface OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.3 |
orinocoPHY OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.3.2 |
pliSystemNameThe sysName of the Access Server. This may be used for
diagnostic purposes. This name will be the same as the
sysName of the system group of MIB IIrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.3.2.1 |
psWlanIfTableThe table contains the information about the
wavelan interfaces present in the Access Server. SEQUENCE OF PsWlanIfEntry .1.3.6.1.4.1.1751.2.4.3.3.2.2 |
psWlanIfEntryThe entry in the wavelan interfac table. Described
next. PsWlanIfEntry .1.3.6.1.4.1.1751.2.4.3.3.2.2.1 |
pliWlanIfIndexA unique value for each interface. The value for
each interface must remain constant at
least from one re-initialization of the entity's
network management system to the next re-
initialization.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.1 |
pliWlanIfNetworkNameThe network name of this wavelan interfacerw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.2 |
pliWlanIfMACAddressThe MAC address of the wavelan card present in this interface.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.3 |
pliWlanIfMediumReservationThe medium reservation value. The range is 0 - 2347.
Default is 2347 - means disabled.
Medium reservation specifies the number of octets in
a message above which a RTS/CTS handshake is performed.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.4 |
pliWlanIfTransmitRateThe transmit rate of this interface.rw INTEGER -- { -- one-fixed(1), -- two-fixed(2), -- two-autofallback(3), -- fixed-medium(4), -- fixed-high(5), -- auto-fallback-standard(6), -- auto-fallback-medium(7) -- } .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.5 |
pliWlanIfOperatingFrequencyThe RF channel that the Access Server is working on.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.6 |
pliWlanIfAPDensityThe AP density in the region.rw INTEGER -- { -- low(1), -- medium(2), -- high(3) -- } .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.7 |
pliWlanIfClosedSystemThis flag identifies whether the Access Server will accept
associate requests in this interface, from AS-Clients having a
network name of 'ANY'. The Access Server should always be a closed
station and such requests should always be rejected. This flag is
provided for diagnostic purposes.rw INTEGER -- { -- closed(1), -- open(2) -- } .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.8 |
pliWlanIfAllowedTransmitRatesThis variables reflects the transmit rates that the
wavelan card supportsro INTEGER .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.9 |
pliWlanIfRegulatoryDomainListThis variables reflects the regulatory domain the wavelan card
belongs to.ro OCTET STRING .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.10 |
pliWlanIfAllowedOperatingFrequenciesThis variables reflects the RF channels that the
wavelan card supports.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.11 |
pliWlanIfCapabilityOptionsThe capabilities of the card. Indicates the support of
features like WEP.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.12 |
pliWlanIfProfileCodeThe varible conprises of a vendor indication (Lucent or
an OEM customer) and a capability indication (eg. bronze
or gold).ro INTEGER .1.3.6.1.4.1.1751.2.4.3.3.2.2.1.13 |
orinocoDriver OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.3.4 |
pliDriverNameThe driver name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.3.4.1 |
pliDriverVersionThe driver's version number. This is a text string
including the major and minor release number, and,
optionally, the patch level: 'mm.nn.pp', where
mm = major release number
nn = point release number
pp = optional patch number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.3.4.2 |
orinocoSNMPSetup OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.4 |
psSNMPReadPasswordThe password for reading object values from the agent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.4.1 |
psSNMPReadWritePasswordThe password for reading and modifying object values
from the agent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.4.2 |
psSNMPTrapHostIPAddressThe IP address of the host to which traps should be sent.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.4.3 |
psSNMPTrapHostPasswordThe password sent with the trap to enable the management
station to ignore unsolicited traps.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.4.4 |
psSNMPManagerCountThe number of management stations that have been
authorised to manage this Access Server.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.4.5 |
psSNMPAccessTableThe table containing the information about the
managers authorised to manage this Access Server. SEQUENCE OF PsSNMPAccessTableEntry .1.3.6.1.4.1.1751.2.4.3.4.6 |
psSNMPAccessTableEntryThe entry in the SNMP access table. Described
next. PsSNMPAccessTableEntry .1.3.6.1.4.1.1751.2.4.3.4.6.1 |
managerIndexManagement station identification number.
Is the index for the table.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.4.6.1.1 |
managerIPAddressIP address of the management station.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.4.6.1.2 |
managerSubnetMaskThe IP subnet mask. Used to grant access to a complete subnet.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.4.6.1.3 |
managerStatusWhether the manager is enabled or disabled.
Used to delete the unwanted entries.rw Enumeration .1.3.6.1.4.1.1751.2.4.3.4.6.1.4 |
psSNMPInBadManagersThe no of attempts to manage this Access Server
by unauthorised managers.ro Counter .1.3.6.1.4.1.1751.2.4.3.4.7 |
psTestSNMPReadWritePasswordThe password for reading and modifying object values
from the agent can be verified by setting this.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.4.8 |
orinocoPPPSetup OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.5 |
psPPPIPAddressAssignmentTypeThis identifies whether the IP addresses assigned
to the AS-Clients are obtained through APM (address
pool manager), through DHCP or through the RADIUS server.rw INTEGER -- { -- apm(1), -- dhcp-relay(2), -- radius(3) -- } .1.3.6.1.4.1.1751.2.4.3.5.1 |
psPPPNoOfMACIPMappingEntriesThe number of static mapping entries.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.5.2 |
psPPPMACIPMappingTableThis table contains the static mapping of
MAC addresses to IP addresses. SEQUENCE OF PsPPPMACIPMappingTableEntry .1.3.6.1.4.1.1751.2.4.3.5.3 |
psPPPMACIPMappingTableEntryThe entry of the asPPPMACIPMappingTable Described below. PsPPPMACIPMappingTableEntry .1.3.6.1.4.1.1751.2.4.3.5.3.1 |
mACIPIndexThis is the index for the mappping table.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.5.3.1.1 |
mACAddressThis is the MAC address.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.5.3.1.2 |
iPAddressThe IP address corresponding to the MAC address.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.5.3.1.3 |
commentThe comment for this entry, maybe the PC's owner.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.5.3.1.4 |
entryStatusWhether the entry is enabled or disabled. Used to delete
the unwanted entries.rw Enumeration .1.3.6.1.4.1.1751.2.4.3.5.3.1.5 |
psPPPKeepAliveIntervalThe keep alive interval to be notified to the PPP
layer.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.5.4 |
psPPPNoOfKeepAliveTimeoutsThe maximum number of timeouts before the session
is torn down.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.5.5 |
psPPPPrimaryDNSIPAddressThe IP address of the primary DNS server in the network.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.5.6 |
psPPPSecondaryDNSIPAddressThe IP address of the secondary DNS server in the network.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.5.7 |
psPPPMaxNoOfUsersThe maximum no of clients permitted to connect to this
Access Server.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.5.8 |
psPPPCHAPStatusThis variable indicates the status of CHAP in the Access Server.rw INTEGER -- { -- enable(1), -- disable(2) -- } .1.3.6.1.4.1.1751.2.4.3.5.9 |
psPPPCHAPPriorityThis variable indicates the priority of CHAP among all
authentictaion protocols enabled on the Access Server.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.5.10 |
psPPPPAPStatusThis variable indicates the status of PAP in the Access Server.rw INTEGER -- { -- enable(1), -- disable(2) -- } .1.3.6.1.4.1.1751.2.4.3.5.11 |
psPPPPAPPriorityThis variable indicates the priority of PAP among all
authentictaion protocols enabled on the Access Server.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.5.12 |
psPPPPrimaryNBNSIPAddressThe IP address of the Primary NBNS server in the network.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.5.13 |
psPPPSecondaryNBNSIPAddressThe IP address of the Secondary NBNS server in the network.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.5.14 |
psPPPIPRangeTableThis table contains the static mapping of
MAC addresses to IP addresses. SEQUENCE OF PsPPPIPRangeTableEntry .1.3.6.1.4.1.1751.2.4.3.5.15 |
psPPPIPRangeTableEntryThe entry of the psPPPIPRangeTable.
Described below. PsPPPIPRangeTableEntry .1.3.6.1.4.1.1751.2.4.3.5.15.1 |
pPPIPIndexThis is the index for the IP range table.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.5.15.1.1 |
startIPAddressThis is the staring IP address of this range.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.5.15.1.2 |
endIPAddressThis is the ending IP address of this range.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.5.15.1.3 |
widthThis is the withd of the range (no of addresses).rw INTEGER .1.3.6.1.4.1.1751.2.4.3.5.15.1.4 |
statusThe status of the entry, whether to be used or not
used. Setting this to delete will remove this entry.rw Enumeration .1.3.6.1.4.1.1751.2.4.3.5.15.1.5 |
iPCommentThe comment for this entry may be the PC owner.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.5.15.1.6 |
psPPPSessionIdleTimeOutThe varible indicates the Session Idle time out.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.5.16 |
orinocoAgent OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.6 |
psVersionThe version of the Access Server software currently execuing.
Would be text string including the major and minor release
number, and, optionally, the patch level: 'mm.nn.pp', where
mm = major release number
nn = point release number
pp = optional patch number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.6.1 |
psIPAddressThe IP address to be assigned to the Access Server (to
change from factory fitted IP address).rw IpAddress .1.3.6.1.4.1.1751.2.4.3.6.2 |
psSubnetMaskThe subnet mask of the Access Server.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.6.3 |
psDefaultGatewayThe default gateway for the Access Server.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.6.4 |
psIPAddressTypeThis can be DHCP/BOOTP(dynamic) or assigned
by User via CLI or AS Manager(static). The
IP address of the Access Server will be
assigned based on this.rw INTEGER -- { -- static(1), -- dynamic(2) -- } .1.3.6.1.4.1.1751.2.4.3.6.5 |
psAdministrativeStateThe administrative state of the substation, can
be Up or Down.rw INTEGER -- { -- up(1), -- down(2) -- } .1.3.6.1.4.1.1751.2.4.3.6.6 |
psTFTPIPAddressThe IP address of the TFTP server.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.6.7 |
psTFTPFilenameThe filename of the image in the TFTP server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.6.8 |
psTFTPOperationThe operation to be done, can be upload or download.rw INTEGER -- { -- upload(1), -- download(2), -- downloadAndReboot(3) -- } .1.3.6.1.4.1.1751.2.4.3.6.9 |
psRebootThis variable must be set to reboot the Access Server. The
value is the number of seconds to wait to do a reboot.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.6.10 |
psSecondsToAdminDownThe count of seconds to go before the administrative state
of the Access Server is made down.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.6.11 |
psContactEmailThe textual identification of the contact person
for this managed node, together with information
on how to contact this person.rw DisplayString .1.3.6.1.4.1.1751.2.4.3.6.12 |
psBSPBootloaderVersionThis object represents the BSP/Bootloader version that is
currently stored in the access server device..ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.6.13 |
psTelnetSesssionsThis object is used to enable or disable telnet access and
to specify the number of active telnet sessions. When this
object is set to 0, telnet access is disabled. When this object
is set to something greater than 0, then it specifies the maximum
number of active telnet sessions.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.6.14 |
psTelnetPasswordPassword to access Access Server from Telenet.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.6.15 |
psTelnetPortThe TCP/IP port for Access Server Telenet daemon.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.6.16 |
psTelnetTimeoutTelnet inactivity timeout in minutes. The default value
is 15 minutesrw INTEGER .1.3.6.1.4.1.1751.2.4.3.6.17 |
psTelnetLoginTimeoutTelnet login timeout in seconds. The default value
is 30 secondsrw INTEGER .1.3.6.1.4.1.1751.2.4.3.6.18 |
psSerialBaudRateSerial interface baud rate. The default value is 9600rw INTEGER -- { -- baud2400(1), -- baud4800(2), -- baud9600(3), -- baud19200(4), -- baud38400(5), -- baud57600(6), -- } .1.3.6.1.4.1.1751.2.4.3.6.19 |
psSerialDataBitsSerial interface data bits. The default value is 8ro INTEGER .1.3.6.1.4.1.1751.2.4.3.6.20 |
psSerialParitySerial interface Parity check. The default value is Nonero INTEGER -- { -- even(1), -- odd(2), -- none(3), -- mark(4), -- space(5) -- } .1.3.6.1.4.1.1751.2.4.3.6.21 |
psSerialStopBitsSerial interface stop bits. The default value is 1ro INTEGER -- { -- bit1(1), -- bit1dot5(2), -- bit2(3) -- } .1.3.6.1.4.1.1751.2.4.3.6.22 |
psSerialFlowControlSerial interface Flow control. The default value is Nonerw INTEGER -- { -- xonXoff(1), -- none(2) -- } .1.3.6.1.4.1.1751.2.4.3.6.23 |
psTFTPFileTypeThe type of the file to be uploaded or downloaded to/from the
access server. The AllConfigFiles options shall upload or
download all the configuration files supported.rw INTEGER -- { -- config-sys(1), -- psimage(2), -- orinoco(3), -- radius(4), -- snmpset(5), -- sysinfo(6), -- ppp(7), -- upgbspbl(8) -- orgbspbl(9) -- allconfigfiles(10) -- } .1.3.6.1.4.1.1751.2.4.3.6.24 |
psDeviceSerialNumberThis parameter identifies the serial number of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.6.25 |
psBroadcastMessageThis parameter allows to set customized messages to be sent
to all connected clients.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.6.26 |
psPOSTVersionNumberThis parameter identifies the POST version number of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.6.27 |
psHardwareVersionNumberThis parameter identifies the Hardware version number of the system.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.6.28 |
radius OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.7 |
radiusClientMIB OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.7.2 |
radiusClientMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.7.2.1 |
radiusClient OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.7.2.1.1 |
radiusClientInvalidServerAddressesThe total number of RADIUS Access-Response messages
received from unknown addresses since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.1 |
radiusServerTableThe (conceptual) table listing the RADIUS servers with
which the client shares a secret. SEQUENCE OF RadiusServerEntry .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2 |
radiusServerEntryAn entry (conceptual row) representing a RADIUS server
with which the client shares a secret. RadiusServerEntry .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1 |
radiusServerIndexThe RADIUS server with whom the client interacts.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.1 |
radiusServerTypeThe RADIUS server type (Authentication or Accounting or Both).
For creating a server entry Server Type should be setro INTEGER -- { -- auth(1), -- acct(2), -- both(3) -- } .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.2 |
radiusServerAddressThe IP address of the RADIUS server referred to in this table
entry.rw IpAddress .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.3 |
radiusServerDestPortAuthThe Authentication port of the RADIUS Server.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.4 |
radiusServerDestPortAcctThe Accounting port of the RADIUS Server.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.5 |
radiusClientAccessRequestsThe total number of RADIUS Access-Request messages sent
since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.6 |
radiusClientAccessRetransmissionsThe total number of RADIUS Access-Request messages retransmitted
since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.7 |
radiusClientAccessAcceptsThe total number of RADIUS Access-Accept messages received
since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.8 |
radiusClientAccessChallengesThe total number of RADIUS Access-Challenge messages received
since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.9 |
radiusClientMalformedAccessResponsesThe total number of malformed RADIUS Access-Response messages
received since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.10 |
radiusClientAuthenticationBadAuthenticatorsThe total number of RADIUS Access-Response messages
containing invalid authenticators received since client
start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.11 |
radiusClientAccessRejectsThe total number of RADIUS Access-Reject messages sent
since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.12 |
radiusClientTimeoutsThe total number of timeouts since client startupro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.13 |
radiusClientAccountingRequestsThe total number of RADIUS Accounting-Request messages sent
since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.14 |
radiusClientAccountingRetransmissionsThe total number of RADIUS Accounting-Request messages
retransmitted since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.15 |
radiusClientAccountingResponsesThe total number of RADIUS Accounting-Response messages
received since client start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.16 |
radiusClientAccountingBadAuthenticatorsThe total number of RADIUS Accounting-Response messages which
contained invalid authenticators received since client
start-upro Counter .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.17 |
radiusServerSharedSecretThe secret string which is shared between Server and Clientrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.18 |
radiusServerEnabledFlag to tell whether the server is active or Inactiverw INTEGER -- { -- enable(1), -- disable(2), -- delete(3) -- } .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.19 |
radiusServerResponseTimeThe maximum time within which the server has to respond for a
request from the clientrw INTEGER .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.20 |
radiusServerMaximumRetransmissionThe allowed maximum no. of trials to be tried by a client
to get response from the server for a requestrw INTEGER .1.3.6.1.4.1.1751.2.4.3.7.2.1.1.2.1.21 |
radiusClientMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.7.2.2 |
radiusClientMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.7.2.2.1 |
radiusClientMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.7.2.2.2 |
orinocoShimECPSetup OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.8 |
psShimECPRetransmissionCountThe number of retransmissions when responses are not
received with the timeout period.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.8.1 |
psShimECPRepeatResponseCountThe number of time the transmitted response can be
retransmitted.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.8.2 |
psShimECPRetransmissionTimeoutThe timeout interval for a response to be received.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.8.3 |
orinocoDiagnostics OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.10 |
orinocoIAPP OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.11 |
psIappStatusIAPP Status (whether IAPP feature should be enabled or diaabled)rw INTEGER -- { -- enable (1), -- disable (2) -- } .1.3.6.1.4.1.1751.2.4.3.11.1 |
psIappAnnReqOutNumber of ANNOUNCE.requests sent.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.2 |
psIappAnnReqInNumber of ANNOUNCE.requests received.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.3 |
psIappAnnRespOutNumber of ANNOUNCE.responses sent.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.4 |
psIappAnnRespInNumber of ANNOUNCE.responses received.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.5 |
psIappHandOvrReqOutNumber of HANDOVER.request sent.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.6 |
psIappHandOvrReqInNumber of HANDOVER.request received.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.7 |
psIappHandOvrRespOutNumber of HANDOVER.responses sent.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.8 |
psIappHandOvrRespInNumber of HANDOVER.responses received.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.9 |
psIappEndSessOutNumber of IAPP End-PPP session PDUs sent.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.10 |
psIappEndSessInNumber of IAPP End-PPP session PDUs received.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.11 |
psIappEndSessAckOutNumber of IAPP End-PPP session acknowledgement PDUs sent.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.12 |
psIappEndSessAckInNumber of IAPP End-PPP session acknowledgement PDUs received.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.13 |
psIappPduDropsNumber of IAPP PDUs dropped.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.14 |
psIappHandOvrReqReSentNumber of HANDOVER requests re-transmitted..ro Counter .1.3.6.1.4.1.1751.2.4.3.11.15 |
psIappAnnIntervalThis parameter represents interval in seconds for performing an
IAPP announce operation by the device. The units for this
parameter is seconds and default value should be 120 seconds.rw INTEGER -- { -- eighty(80), -- oneHundredTwenty(120), -- oneHundredSixty(160), -- twoHundred(200) -- } .1.3.6.1.4.1.1751.2.4.3.11.16 |
psIappAnnRespTimeThis parameter indicates the amount of time in seconds the
device waits to send an IAPP announce response after an announce
request message is sent. This parameter is set to a default value
of 2 seconds and is not configurable.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.11.17 |
psIappHandOvrTimeOutThis parameter represents the time in milliseconds the device
waits before it resends a handover response message. The default
value for this parameter should be 512 milliseconds.rw INTEGER -- { -- fiveHundredTwelve(512), -- sixHundredFourteen(614), -- sevenHundredSeventeen(717), -- eightHundredNineteen(819) -- } .1.3.6.1.4.1.1751.2.4.3.11.18 |
psIappMaxHandOvrRetriesThis parameter indicates the maximum amount of retransmission sent
by the device for a handover request message. The default for this
parameter should be 2.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.11.19 |
psIappRoamingClientsNumber of roaming clients currently attached to the
Access Server.ro Counter .1.3.6.1.4.1.1751.2.4.3.11.20 |
orinocoIPX OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.12 |
psIpxStatusWhich protocol is supported, i.e, IP or IPX or both IP and IPX.rw INTEGER -- { -- ip(1), -- ipx(2), -- both(3) -- } .1.3.6.1.4.1.1751.2.4.3.12.1 |
psIpxDefaultRouterNodeNumIf the source IPX network number is not equal to the destination
IPX Network number in the packet from wireless side to the wired
side, then replace the destination Ether MAC addr with the value of
this object (Default IPX router node number).rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.12.2 |
psIpxWiredToWlessBridgedNumber of packets bridged from wired side to wireless side.ro Counter .1.3.6.1.4.1.1751.2.4.3.12.3 |
psIpxWlessToWiredBridgedNumber of packets bridged from wiredless side to wired side.ro Counter .1.3.6.1.4.1.1751.2.4.3.12.4 |
psIpxEthernetEncapsulationFormatEncapsulation type to be used for the IPX packets sent in wired
siderw INTEGER -- { -- ethII802dot3encapsulation(1), -- eth802dot3withSnapHdr(2), -- eth802dot3woSnapHdr(3) -- } .1.3.6.1.4.1.1751.2.4.3.12.5 |
psASClientTableThe (conceptual) table listing the ASClients (IPX) connected to the
access server 2000 device. SEQUENCE OF PsASClientEntry .1.3.6.1.4.1.1751.2.4.3.12.6 |
psASClientEntryAn entry (conceptual row) representing a ASClient (IPX) connnected to
the Access Server 2000 device. PsASClientEntry .1.3.6.1.4.1.1751.2.4.3.12.6.1 |
psPPPSessionIdThe PPP Session ID assigned by the AS-2000 to this
ASClient.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.12.6.1.1 |
psIpxClientNetworkNumberThe IPX Node Number assigned by the Novell Server to
this IPX client.ro OCTET STRING .1.3.6.1.4.1.1751.2.4.3.12.6.1.2 |
psIpxClientMACThe Wireless MAC of this IPX Client.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.12.6.1.3 |
psIpxClientStatusFlag to indicate whether the IPX Client is Active or
Inactive. IPX Client status can also be
disabled/enabled/deleted.rw Enumeration .1.3.6.1.4.1.1751.2.4.3.12.6.1.4 |
psASClientSessionUpTimeThis object represents the session up time for each AS Client
or PPP virttual interface.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1751.2.4.3.12.6.1.5 |
psASClientPacketsInThis object represents the number of packets (unicast and
non-unicast)recieved for each AS Client or PPP virttual
interface.ro Counter .1.3.6.1.4.1.1751.2.4.3.12.6.1.6 |
psASClientPacketsOutThis object represents the number of packets (unicast and
non-unicast)sent for each AS Client or PPP virttual
interface.ro Counter .1.3.6.1.4.1.1751.2.4.3.12.6.1.7 |
orinocoLinkTest OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.13 |
oriLinkTestTimeOutThe value of this parameter determines the time that a link test
will continue without any SNMP requests for a Link Test Table
entry. When the time expires the Link Test Table is cleared.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.13.1 |
oriLinkTestIntervalThis parameter indicates the interval (in millisec) between
sending link test frames to a station. Default on 200
millisecond.rw INTEGER .1.3.6.1.4.1.1751.2.4.3.13.3 |
oriLinkTestExploreWhen this parameter is set to 2, the access point will send out
an explore request on all 802.11 interfaces and from the results
build the Link Test table. This table is valid only while this
parameter is 3.rw INTEGER -- { -- tabletimedout(1), -- exploring(2), -- exploreresultsavailable(3) -- } .1.3.6.1.4.1.1751.2.4.3.13.4 |
oriLinkTestTableThis table contains the information for the stations currently
associated with this access point. SEQUENCE OF OriLinkTestTableEntry .1.3.6.1.4.1.1751.2.4.3.13.5 |
oriLinkTestTableEntryThis parameter represents the entry in the Remote Link Test
table.This is described below. OriLinkTestTableEntry .1.3.6.1.4.1.1751.2.4.3.13.5.1 |
oriLinkTestTableIndexThis parameter represents a unique value for each stattion. The
value for each station must remain constant at least from one
explore to the next.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.1 |
oriLinkTestInProgressWhen this parameter is set to 2 the access point will initiate a
link test sequence with this station.rw INTEGER -- { -- nolinktestinprogress(1), -- linktestinprogress(2) -- } .1.3.6.1.4.1.1751.2.4.3.13.5.1.2 |
oriLinkTestStationNameThis parameter identifies the name of the station whom which the
link test is being performed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.13.5.1.3 |
oriLinkTestMACAddressThis variable represents the MAC address that will be mapped to
the IP Address of the station.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.13.5.1.4 |
oriLinkTestStationProfileThis parameter represents the profile/capabilities for this
station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.5 |
oriLinkTestOurCurSignalLevelThe current signal level (in dB)for the link test from this
station. This variable indicates the running average of the local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.6 |
oriLinkTestOurCurNoiseLevelThe current noise level (in dB)for the link test to this station.
This variable indicates the running average of the local noise
level.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.7 |
oriLinkTestOurCurSNRThe current signal to noise ratio for the link test to this
station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.8 |
oriLinkTestOurMinSignalLevelThe minimum signal level during the link test to this station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.9 |
oriLinkTestOurMinNoiseLevelThe minimum noise level during the link test to this station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.10 |
oriLinkTestOurMinSNRThe minimum signal to noise ratio during the link test to this
station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.11 |
oriLinkTestOurMaxSignalLevelThe maximum signal level during the link test to this station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.12 |
oriLinkTestOurMaxNoiseLevelThe maximum noise level during the link test to this station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.13 |
oriLinkTestOurMaxSNRThe maximum signal to noise ratio during the link test to this
station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.14 |
oriLinkTestOurLowFrameCountThe total number of frames sent at 1 Mbit/s speed during the link
test to this station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.15 |
oriLinkTestOurStandardFrameCountThe total number of frames sent at 2 Mbit/s speed during the link
test to this station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.16 |
oriLinkTestOurMediumFrameCountThe total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to this station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.17 |
oriLinkTestOurHighFrameCountThe total number of frames sent at 11 Mbit/s (for Turbo-8, it is
8 Mbit/s) speed during the link test to this station.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.18 |
oriLinkTestHisCurSignalLevelThe current signal level for the link test to the remote station
or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.19 |
oriLinkTestHisCurNoiseLevelThe current noise level for the link test to the remote station or
access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.20 |
oriLinkTestHisCurSNRThe current signal to noise ratio for the link test to the remote
station or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.21 |
oriLinkTestHisMinSignalLevelThe minimum signal level during the link test to the remote statio
or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.22 |
oriLinkTestHisMinNoiseLevelThe minimum noise level during the link test to the remote station
or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.23 |
oriLinkTestHisMinSNRThe minimum signal to noise ratio during the link test to the
remote station or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.24 |
oriLinkTestHisMaxSignalLevelThe maximum signal level during the link test to the remote
station or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.25 |
oriLinkTestHisMaxNoiseLevelThe maximum noise level during the link test to the remote station
or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.26 |
oriLinkTestHisMaxSNRThe maximum signal to noise ratio during the link test to the
remote station or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.27 |
oriLinkTestHisLowFrameCountThe total number of frames sent at 1 Mbit/s speed during the link
test to the remote station or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.28 |
oriLinkTestHisStandardFrameCountThe total number of frames sent at 2 Mbit/s speed during the link
test to the remote station or access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.29 |
oriLinkTestHisMediumFrameCountThe total number of frames sent at 5.5 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to the remote station or
access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.30 |
oriLinkTestHisHighFrameCountThe total number of frames sent at 11 Mbit/s (for Turbo-8, it is
5 Mbit/s) speed during the link test to the remote station or
access point.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.31 |
oriLinkTestInterfaceThe PCMCIA Card Number to which the Client has sent the Explore
Response Message.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.32 |
oriLinkTestRadioTypeThe Wireless Standard eg. IEEE 802.11 or IEEE 802.11b used on the
Radio.ro INTEGER .1.3.6.1.4.1.1751.2.4.3.13.5.1.33 |
accessServerTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.15 |
accessServerTrapVariables OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.15.1 |
accessServerGenericInformationMessageAny generic string information can be sent as this message. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.15.1.1 |
accessServerMacAddressThe MAC address that is sent with the traps to
identify which Access Server has the problem PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.15.1.2 |
accessServerFailedTFTPServerAddressThe ip address configured as the TFTP server
for which the operation upload/download failed. IpAddress .1.3.6.1.4.1.1751.2.4.3.15.1.3 |
accessServerFailedTFTPFilenameThe filename configured to be retrieved/sent from/to
the TFTP server for which the operation upload/download
failed. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.15.1.4 |
accessServerFailedTFTPOperationThis variable used in conjunction with the different TFTP traps (
TFTPInitiated, TFTPFailed, TFTPCompleted) INTEGER -- { -- upload(1), -- download(2) -- } .1.3.6.1.4.1.1751.2.4.3.15.1.5 |
accessServerSuspendedTaskNameThe task that was suspended, can be several tasks executed within
the Access Server. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1751.2.4.3.15.1.6 |
accessServerWirelessCardThis trap variable is used to determine on which Wireless Card,
PC Card A or PC Card B, a wireless TRAP has occured on. Enumeration .1.3.6.1.4.1.1751.2.4.3.15.1.7 |
accessServerFlashRelatedTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.15.2 |
accessServerFlashEmptyThis trap is sent when the FLASH is empty. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.2.0.1 |
accessServerFlashCorruptedThis trap is sent when the data in the FLASH is corrupted. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.2.0.2 |
accessServerConfigurationRelatedTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.15.3 |
accessServerInvalidKeyThis trap is sent when an invalid key is detected at the
accessServer. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.1 |
accessServerAPMNotConfiguredThis trap is sent when the APM information is not
configured in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.2 |
accessServerWLCIncompatibleFirmwareThis trap is sent when an ORiNOCO PC Card plugged
in the Access Server is not compatible with the firmware
versions supported. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.3 |
accessServerWLCFailureThis trap is sent when an ORiNOCO PC Card is not present or
there is a failure in the ORiNOCO PC card. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.4 |
accessServerWLCRemovalThis trap is generated when the ORiNOCO PC Card is removed
from the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.5 |
accessServerRadiusNotConfiguredThis trap is sent when the radius information is not configured
in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.6 |
accessServerDNSIPNotConfiguredThis trap is sent when the DNS IP information is not
configured in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.7 |
accessServerNBNSIPNotConfiguredThis trap is sent when the NBNS IP information is not
configured in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.8 |
accessServerRadiusAuthenticationNotConfiguredThis trap is sent when the radius authentication information
is not configured in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.9 |
accessServerRadiusAccountingNotConfiguredThis trap is sent when the radius accounting information
is not configured in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.10 |
accessServerDuplicateIPAddressEncounteredThis trap is sent when the IP Address of the Access Server
is also used by someother device in the network. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.11 |
accessServerWLCVoltageDiscrepancyThis trap is sent when non 5volt card or 3.3 v card is
inserted in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.12 |
accessServerWLCIncompatibleVendorThis trap is generated when an incompatible wireless vendor
card is inserted or present in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.13 |
accessServerWLCFirmwareDownloadFailureThis trap is generated when a failure occurs during the firmware
download process. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.3.0.14 |
accessServerDiagnosticTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.15.4 |
accessServerTFTPInitiatedThis trap is sent when a TFTP operation happens
at the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.1 |
accessServerTFTPCompletedThis trap is sent when a TFTP operation failure happens
at the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.2 |
accessServerTFTPFailureThis trap is sent when a TFTP operation failure happens
at the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.3 |
accessServerAdminStateMadeUpThis trap is sent when the Access Server Admin state is made
'up' TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.4 |
accessServerAdminStateMadeDownThis trap is sent when the Access Server Admin state is made
'down' TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.5 |
accessServerRebootingNowThis trap is sent when the Access Server is about to reboot. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.6 |
accessServerTaskSuspendedThis trap is sent when a task has suspended in the Access Server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.7 |
accessServerBootPFailedThis trap is sent when the BootP protocol in the bootloader has
failed. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.8 |
accessServerDHCPFailedThis trap is sent when the DHCP in the application software has
failed. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.4.0.9 |
accessServerImageTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1751.2.4.3.15.5 |
accessServerZeroSizeImageThis trap is sent when an image of size zero (0) is downloaded
to the access server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.5.0.1 |
accessServerNonVxWorksImageThis trap is sent when a non-VxWorks image is downloaded to the
access server. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.5.0.2 |
accessServerImageTooLargeThis trap is sent when the image downloaded to the access server
exceeds the size limitation of 5 MB. TRAP-TYPE .1.3.6.1.4.1.1751.2.4.3.15.5.0.3 |