ARUBAWIRED-SWITCH-IMAGE-MIB
The ARUBAWIRED-SWITCH-IMAGE-MIB enables monitoring and management of the firmware image inventory, including file names, sizes, and checksums, stored in the non-volatile memory of Aruba Wired Switches. This module facilitates critical operational tasks such as verifying image integrity, tracking available boot versions, and managing firmware upgrades across the switch fleet.
Imported Objects
Objects
21 total| Object Name |
|---|
arubaWiredSwitchImageThis MIB describes information about switch operating system images loaded in non-volatile storage. MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.26 |
arubaWiredSwitchImageObject OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.26.1 |
arubaWiredSwitchImageGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.26.1.0 |
arubaWiredDefaultBootThis object describes the default flash boot image. It may be either primary or secondary image.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.26.1.0.1 |
arubaWiredDefaultBootEnumThis object describes the default flash boot image. It may be either primary (1) or secondary (2) image.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.26.1.0.2 |
arubaWiredBootProfileTimeoutThis object describes the time in seconds that the system waits for a user to select the software image to boot with. The switch is booted with the default software image if the user does not select within this timeframe.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.26.1.0.3 |
arubaWiredSwitchImageDetails OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.26.1.1 |
arubaWiredSwitchImageTableEach entry of this table describes information like size of image, build date, image version and the SHA256 for the images that are present in the flash. SEQUENCE OF ArubaWiredSwitchImageEntry .1.3.6.1.4.1.47196.4.1.1.3.26.1.1.1 |
arubaWiredSwitchImageEntryEach entry of this table describes information like size of image, build date, image version and the SHA256 for the images that are present in the flash. ArubaWiredSwitchImageEntry .1.3.6.1.4.1.47196.4.1.1.3.26.1.1.1.1 |
arubaWiredSwitchImageTypeEnumThis object describes flash image type. It may be primary (1) or secondary (2) image. Enumeration .1.3.6.1.4.1.47196.4.1.1.3.26.1.1.1.1.1 |
arubaWiredSwitchImageTypeThis object describes flash image type. It may be primary or secondary image.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.26.1.1.1.1.2 |
arubaWiredSwitchImageVersionThis object describes the version number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.26.1.1.1.1.3 |
arubaWiredSwitchImageSizeThis object describes the image size.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.26.1.1.1.1.4 |
arubaWiredSwitchImageBuildDateThis object describes the date on which this image is built.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.26.1.1.1.1.5 |
arubaWiredSwitchImageShaThis object describes the SHA256 calculated for this image.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.26.1.1.1.1.6 |
arubaWiredSwitchImageConformance OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.26.2 |
arubaWiredSwitchImageGroups OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.26.2.1 |
arubaWiredSwitchFlashImagesGroupA mandatory group which is required to give the details including image size, image build date, image version, and image type for the images in the flash. Unknown .1.3.6.1.4.1.47196.4.1.1.3.26.2.1.1 |
arubaWiredSwitchBootGroupA mandatory group which is required to give the details including the default image and the boot profile timeout length. Unknown .1.3.6.1.4.1.47196.4.1.1.3.26.2.1.2 |
arubaWiredSwitchImageCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.26.2.2 |
arubaWiredSwitchImageComplianceThe compliance statement is for arubaWiredSwitchFlashImagesGroup, arubaWiredSwitchBootGroup. Unknown .1.3.6.1.4.1.47196.4.1.1.3.26.2.2.1 |
More MIBs from HPE/Aruba Networking Division
Browse all HPE/Aruba Networking DivisionMIBs →The ARUBAWIRED-NETWORKING-OID MIB module provides proprietary extensions for monitoring HPE Aruba Networking hardware, enabling the retrieval of device-specific operational metrics, interface statistics, and system health indicators not covered by standard SNMP MIBs.
The ARUBAWIRED-MGMD-SNOOPING-MIB enables monitoring and management of Multicast Group Management Daemon (MGMD) snooping configurations and state metrics on HPE Aruba wired network switches. This module provides visibility into multicast group memberships, snooping table entries, and interface-specific filtering states to optimize Layer 2 multicast traffic forwarding.
The ARUBAWIRED-PM-MIB enables SNMP-based monitoring and management of pluggable optical transceivers and SFP modules on Aruba wired network infrastructure, exposing critical telemetry such as optical power levels, laser bias currents, temperature, and voltage status for hardware health verification.
The ARUBAWIRED-RPVST-MIB module enables monitoring and management of Rapid Per-VLAN Spanning Tree (RPVST) protocol states, port roles, and topology changes on Aruba wired network switches. It provides visibility into VLAN-specific spanning tree instances, including root bridge election, port blocking/forwarding status, and BPDU transmission metrics for each configured VLAN.
The ARUBAWIRED-LLDP-MIB enables monitoring of Link Layer Discovery Protocol (LLDP) objects specifically for Power Source Equipment (PSE) capabilities on HPE Aruba wired network devices. This module facilitates the retrieval of power negotiation parameters, such as Power via MDI (802.3af/at) status and allocated power levels, to manage PoE distribution and device connectivity.
The ARUBAWIRED-VSX-MIB provides SNMP access to monitor and manage High Availability and Virtual Switching Extension (VSX) cluster states, synchronization status, and inter-chassis link health on HPE Aruba CX switches. It exposes specific metrics for VSX peer relationships, including active/standby roles, keepalive status, and configuration synchronization counters to ensure cluster integrity.