ARUBAWIRED-POWER-STAT-MIB
The ARUBAWIRED-POWER-STAT-MIB module enables SNMP-based monitoring of power consumption statistics and status metrics for Aruba Wired infrastructure components. It provides granular visibility into power usage data for switches and related hardware to support capacity planning and fault isolation.
Imported Objects
Objects
19 total| Object Name |
|---|
arubaWiredPowerStatThis MIB module describes power statistics of components. MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.11.8 |
arubaWiredPowerStatNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.8.0 |
arubaWiredPowerStatObjects OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.8.1 |
arubaWiredPowerStatSys OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0 |
arubaWiredPowerStatTableThis table contains one row per component entity. SEQUENCE OF ArubaWiredPowerStatEntry .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1 |
arubaWiredPowerStatEntryInformation about component power statistics. ArubaWiredPowerStatEntry .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1 |
arubaWiredPowerStatGroupIndexThis variable uniquely identifies the group containing the component. Group means chassis in the stack and the value 1 MUST be used for non-modular devices. Integer32 .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1.1 |
arubaWiredPowerStatTypeIndexThis variable defines the component type such as chassis. Integer32 .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1.2 |
arubaWiredPowerStatSlotIndexThis variable defines the instance of the component type. Index values will be between 1 and the maximum number of components of a given type that exist in the system. Integer32 .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1.3 |
arubaWiredPowerStatNameIdentification of the component for the system.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1.4 |
arubaWiredPowerStatTypeType of component.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1.5 |
arubaWiredPowerStatPowerConsumedInstantaneous power consumption value which is updated every 5 seconds. Total power consumption is reported in the corresponding chassis component of this object.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1.6 |
arubaWiredPowerStatPowerConsumedAverageIn chassis component, an average that is calculated from total power consumption over a period of time.ro RealDecTwo UNITS "Watts" .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1.7 |
arubaWiredPowerStatPowerConsumedAveragePeriodIn chassis component, the period of time to calculate average power consumption.rw Integer32 .1.3.6.1.4.1.47196.4.1.1.3.11.8.1.0.1.1.8 |
arubaWiredPowerStatConformance OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.8.2 |
arubaWiredPowerStatCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.8.2.1 |
arubaWiredPowerStatComplianceA compliance statement for Aruba wired Power stat MIB. Unknown .1.3.6.1.4.1.47196.4.1.1.3.11.8.2.1.1 |
arubaWiredPowerStatGroups OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.8.2.2 |
arubaWiredPowerStatTableGroupA collection of objects which contain measurements of Power Stat table. Unknown .1.3.6.1.4.1.47196.4.1.1.3.11.8.2.2.1 |
More MIBs from HPE/Aruba Networking Division
Browse all HPE/Aruba Networking DivisionMIBs →The ARUBAWIRED-NETWORKING-OID MIB module provides proprietary extensions for monitoring HPE Aruba Networking hardware, enabling the retrieval of device-specific operational metrics, interface statistics, and system health indicators not covered by standard SNMP MIBs.
The ARUBAWIRED-MGMD-SNOOPING-MIB enables monitoring and management of Multicast Group Management Daemon (MGMD) snooping configurations and state metrics on HPE Aruba wired network switches. This module provides visibility into multicast group memberships, snooping table entries, and interface-specific filtering states to optimize Layer 2 multicast traffic forwarding.
The ARUBAWIRED-PM-MIB enables SNMP-based monitoring and management of pluggable optical transceivers and SFP modules on Aruba wired network infrastructure, exposing critical telemetry such as optical power levels, laser bias currents, temperature, and voltage status for hardware health verification.
The ARUBAWIRED-RPVST-MIB module enables monitoring and management of Rapid Per-VLAN Spanning Tree (RPVST) protocol states, port roles, and topology changes on Aruba wired network switches. It provides visibility into VLAN-specific spanning tree instances, including root bridge election, port blocking/forwarding status, and BPDU transmission metrics for each configured VLAN.
The ARUBAWIRED-LLDP-MIB enables monitoring of Link Layer Discovery Protocol (LLDP) objects specifically for Power Source Equipment (PSE) capabilities on HPE Aruba wired network devices. This module facilitates the retrieval of power negotiation parameters, such as Power via MDI (802.3af/at) status and allocated power levels, to manage PoE distribution and device connectivity.
The ARUBAWIRED-VSX-MIB provides SNMP access to monitor and manage High Availability and Virtual Switching Extension (VSX) cluster states, synchronization status, and inter-chassis link health on HPE Aruba CX switches. It exposes specific metrics for VSX peer relationships, including active/standby roles, keepalive status, and configuration synchronization counters to ensure cluster integrity.