ARUBAWIRED-MCLAG-MIB
The ARUBAWIRED-MCLAG-MIB module provides SNMP visibility into Multi-Chassis Link Aggregation (MCLAG) operational states, peer synchronization status, and interface membership attributes for HPE Aruba wired switching platforms. It enables the monitoring of MCLAG session health, split-brain detection mechanisms, and link aggregation group consistency across redundant chassis pairs.
Imported Objects
Objects
53 total| Object Name |
|---|
arubaWiredMclagMIBThis is the MIB module related to HPE Aruba MCLAG feature MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.2 |
arubaWiredMclagConfig OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.2.1 |
arubaWiredMclagIslConfig OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.2.1.1 |
arubaWiredMclagIslPortIfIndex corresponding to the Mclag InterSwitchLink port. A value of 0 means there is no ISL port configuration.rwobsolete InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.1 |
arubaWiredMclagIslHelloIntervalISLP hello interval in seconds. The default value is 1.rwobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.2 |
arubaWiredMclagIslHoldTimeISL port-flap hold time in seconds. The default value is 0.rwobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.3 |
arubaWiredMclagIslHelloTimeoutISL hello timeout in seconds. The default value is 3.rwobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.4 |
arubaWiredMclagIslDevicePriorityMclags on device with lower value of priority will stay UP in the case of split. The default value is 8.rwobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.5 |
arubaWiredMclagIslSystemIDDevice identifier. This is advertised over ISL.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.6 |
arubaWiredMclagIslPlatformNameDevice type. This is advertised over ISL.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.7 |
arubaWiredMclagIslSwVersionS/W version running on the device type. This is advertised over ISL.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.8 |
arubaWiredMclagIslVIDListVLAN IDs that the ISL port is a member of.roobsolete VidList .1.3.6.1.4.1.47196.4.1.1.3.2.1.1.9 |
arubaWiredMclagKeepAliveConfig OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.2.1.2 |
arubaWiredMclagKeepAliveSrcIPAddrTypeThe KeepAlive source address type. It can be IPv4 or IPv6.rwobsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.1 |
arubaWiredMclagKeepAliveSrcIPAddrThe KeepAlive source address. It can be IPv4 or IPv6.rwobsolete InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.2 |
arubaWiredMclagKeepAliveVrfThe KeepAlive VRF domain.rwobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.3 |
arubaWiredMclagKeepAliveUdpPortThe KeepAlive UDP port. Same port is used as source and destination UDP ports.rwobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.4 |
arubaWiredMclagKeepAlivePeerIPAddrTypeThe KeepAlive peer address type. It can be IPv4 or IPv6.rwobsolete InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.5 |
arubaWiredMclagKeepAlivePeerIPAddrThe KeepAlive peer address. It can be IPv4 or IPv6.rwobsolete InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.6 |
arubaWiredMclagKeepAliveHelloIntervalKeepAlive hello interval in seconds. The default value is 1.rwobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.7 |
arubaWiredMclagKeepAliveHelloTimeoutKeepAlive hello timeout in seconds. The default value is 3.rwobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.8 |
arubaWiredMclagKeepAliveDevicePriorityDevice priority that will be advertised via KeepAlive protocol.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.9 |
arubaWiredMclagKeepAliveSystemIDDevice identifier that will be advertised via KeepAlive protocol.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.10 |
arubaWiredMclagKeepAlivePlatformNameDevice type that will be advertised via KeepAlive protocol.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.11 |
arubaWiredMclagKeepAliveSwVersionS/W version that will be advertised via KeepAlive protocol.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.1.2.12 |
arubaWiredMclagAggregatorConfig OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.2.1.3 |
arubaWiredMclagAggregatorTableThis table supplements the table 'dot3adAggTable' in ieee802.3ad mib.obsolete SEQUENCE OF ArubaWiredMclagAggregatorEntry .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1 |
arubaWiredMclagAggregatorEntryThe fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib.obsolete ArubaWiredMclagAggregatorEntry .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1 |
arubaWiredMclagAggregatorIndexThe unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only.obsolete InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.1 |
arubaWiredMclagAggregatorTypeThis field specifies the aggregator/lag type.rwobsolete Enumeration .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.2 |
arubaWiredMclagVlanListVLANs that this aggregator is a member of. This is used for configuration consistency validation.roobsolete VidList .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.3 |
arubaWiredMclagLoopProtectEnabledLoop Protect protocol admin state for this MCLAG. This is used for configuration consistency validation.roobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.4 |
arubaWiredMclagLoadBalanceSchemeLoad balance scheme configured for this MCLAG. This is used for configuration consistency validation.roobsolete Enumeration .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.5 |
arubaWiredMclagCosOverrideCoS override configuration for this MCLAG. This is used for configuration consistency validation.roobsolete INTEGER .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.6 |
arubaWiredMclagDscpOverrideDSCP override configuration for this MCLAG. This is used for configuration consistency validation.roobsolete INTEGER .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.7 |
arubaWiredMclagQoSTrustPort QoS trust mode configured for this MCLAG. This is used for configuration consistency validation.roobsolete Enumeration .1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.8 |
arubaWiredMclagStatus OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.2.2 |
arubaWiredMclagIslStatus OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.2.2.1 |
arubaWiredMclagIslOperStateISL operational state.roobsolete Enumeration .1.3.6.1.4.1.47196.4.1.1.3.2.2.1.1 |
arubaWiredMclagIslPduTxNumber of ISL PDUs transmitted by this device.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.2.1.2 |
arubaWiredMclagIslPduRxNumber of ISL PDUs received by this device.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.2.1.3 |
arubaWiredMclagIslHelloTxNumber of ISL Hello packets transmitted by this device.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.2.1.4 |
arubaWiredMclagIslHelloRxNumber of ISL Hello packets received by this device.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.2.1.5 |
arubaWiredMclagDeviceOperRoleOperational role of this device derived based on device priority of the 2 devices.roobsolete Enumeration .1.3.6.1.4.1.47196.4.1.1.3.2.2.1.6 |
arubaWiredMclagDeviceOperSystemIDSystem identifier used by this device - derived from system identifier values of the 2 devices.roobsolete DisplayString (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.2.2.1.7 |
arubaWiredMclagKeepAliveStatus OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.2.2.2 |
arubaWiredMclagKeepAliveOperStateKeepAlive protocol operational state.roobsolete Enumeration .1.3.6.1.4.1.47196.4.1.1.3.2.2.2.1 |
arubaWiredMclagKeepAlivePacketsTxNumber of KeepAlive protocol packets transmitted by this device.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.2.2.2 |
arubaWiredMclagKeepAlivePacketsRxNumber of KeepAlive protocol packets received by this device.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.2.2.3 |
arubaWiredMclagKeepAlivePacketsDropNumber of KeepAlive protocol packets dropped.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.2.2.4 |
arubaWiredMclagKeepAliveTimeoutCountNumber of times KeepAlive protocol went to failed state because of KeepAlive timer expiry.roobsolete Integer32 .1.3.6.1.4.1.47196.4.1.1.3.2.2.2.5 |
arubaWiredMclagKeepAliveLastEstablishedTimeStores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.47196.4.1.1.3.2.2.2.6 |
arubaWiredMclagKeepAliveLastFailedTimeStores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed.roobsolete TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.47196.4.1.1.3.2.2.2.7 |
More MIBs from HPE/Aruba Networking Division
Browse all HPE/Aruba Networking DivisionMIBs →The ARUBAWIRED-NETWORKING-OID MIB module provides proprietary extensions for monitoring HPE Aruba Networking hardware, enabling the retrieval of device-specific operational metrics, interface statistics, and system health indicators not covered by standard SNMP MIBs.
The ARUBAWIRED-MGMD-SNOOPING-MIB enables monitoring and management of Multicast Group Management Daemon (MGMD) snooping configurations and state metrics on HPE Aruba wired network switches. This module provides visibility into multicast group memberships, snooping table entries, and interface-specific filtering states to optimize Layer 2 multicast traffic forwarding.
The ARUBAWIRED-PM-MIB enables SNMP-based monitoring and management of pluggable optical transceivers and SFP modules on Aruba wired network infrastructure, exposing critical telemetry such as optical power levels, laser bias currents, temperature, and voltage status for hardware health verification.
The ARUBAWIRED-RPVST-MIB module enables monitoring and management of Rapid Per-VLAN Spanning Tree (RPVST) protocol states, port roles, and topology changes on Aruba wired network switches. It provides visibility into VLAN-specific spanning tree instances, including root bridge election, port blocking/forwarding status, and BPDU transmission metrics for each configured VLAN.
The ARUBAWIRED-LLDP-MIB enables monitoring of Link Layer Discovery Protocol (LLDP) objects specifically for Power Source Equipment (PSE) capabilities on HPE Aruba wired network devices. This module facilitates the retrieval of power negotiation parameters, such as Power via MDI (802.3af/at) status and allocated power levels, to manage PoE distribution and device connectivity.
The ARUBAWIRED-VSX-MIB provides SNMP access to monitor and manage High Availability and Virtual Switching Extension (VSX) cluster states, synchronization status, and inter-chassis link health on HPE Aruba CX switches. It exposes specific metrics for VSX peer relationships, including active/standby roles, keepalive status, and configuration synchronization counters to ensure cluster integrity.