ARUBAWIRED-LED-LOCATOR-MIB
The ARUBAWIRED-LED-LOCATOR-MIB provides SNMP management objects for controlling the physical LED locator indicators on Aruba wired network switches, enabling remote identification and troubleshooting of specific hardware units within a rack or data center environment.
Imported Objects
Objects
13 total| Object Name |
|---|
arubaWiredLedLocatorThis MIB module describes management objects that manage locator LEDs. MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.11.7 |
arubaWiredLedLocatorObjects OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.7.1 |
arubaWiredLedLocatorDetails OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.7.1.1 |
arubaWiredLedLocatorTableThis table contains one entry for each settable locator LED in the system. SEQUENCE OF ArubaWiredLedLocatorEntry .1.3.6.1.4.1.47196.4.1.1.3.11.7.1.1.1 |
arubaWiredLedLocatorEntryInformation about the LED locator physical entity table. ArubaWiredLedLocatorEntry .1.3.6.1.4.1.47196.4.1.1.3.11.7.1.1.1.1 |
arubaWiredLedLocatorGroupIndexThis variable uniquely identifies the group containing the LED locator. Group means chassis in the stack and the value 1 MUST be used for non-stacking devices. Integer32 .1.3.6.1.4.1.47196.4.1.1.3.11.7.1.1.1.1.1 |
arubaWiredLedLocatorNameGroup and name of the locator LED.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.11.7.1.1.1.1.2 |
arubaWiredLedLocatorStateCurrent state of the locator LED. The allowed states which can be written are on, off, flashing, fast_blink, half_bright. The other states which are slow_blink and hw_control are read-onlyrw DisplayString .1.3.6.1.4.1.47196.4.1.1.3.11.7.1.1.1.1.3 |
arubaWiredLedLocatorConformance OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.7.2 |
arubaWiredLedLocatorCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.7.2.1 |
arubaWiredLedLocatorComplianceA compliance statement for Aruba led locators. Unknown .1.3.6.1.4.1.47196.4.1.1.3.11.7.2.1.1 |
arubaWiredLedLocatorGroups OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.11.7.2.2 |
arubaWiredLedLocatorTableGroupA collection of objects display configuration and names for the led locator table. Unknown .1.3.6.1.4.1.47196.4.1.1.3.11.7.2.2.1 |
More MIBs from HPE/Aruba Networking Division
Browse all HPE/Aruba Networking DivisionMIBs →The ARUBAWIRED-NETWORKING-OID MIB module provides proprietary extensions for monitoring HPE Aruba Networking hardware, enabling the retrieval of device-specific operational metrics, interface statistics, and system health indicators not covered by standard SNMP MIBs.
The ARUBAWIRED-MGMD-SNOOPING-MIB enables monitoring and management of Multicast Group Management Daemon (MGMD) snooping configurations and state metrics on HPE Aruba wired network switches. This module provides visibility into multicast group memberships, snooping table entries, and interface-specific filtering states to optimize Layer 2 multicast traffic forwarding.
The ARUBAWIRED-PM-MIB enables SNMP-based monitoring and management of pluggable optical transceivers and SFP modules on Aruba wired network infrastructure, exposing critical telemetry such as optical power levels, laser bias currents, temperature, and voltage status for hardware health verification.
The ARUBAWIRED-RPVST-MIB module enables monitoring and management of Rapid Per-VLAN Spanning Tree (RPVST) protocol states, port roles, and topology changes on Aruba wired network switches. It provides visibility into VLAN-specific spanning tree instances, including root bridge election, port blocking/forwarding status, and BPDU transmission metrics for each configured VLAN.
The ARUBAWIRED-LLDP-MIB enables monitoring of Link Layer Discovery Protocol (LLDP) objects specifically for Power Source Equipment (PSE) capabilities on HPE Aruba wired network devices. This module facilitates the retrieval of power negotiation parameters, such as Power via MDI (802.3af/at) status and allocated power levels, to manage PoE distribution and device connectivity.
The ARUBAWIRED-VSX-MIB provides SNMP access to monitor and manage High Availability and Virtual Switching Extension (VSX) cluster states, synchronization status, and inter-chassis link health on HPE Aruba CX switches. It exposes specific metrics for VSX peer relationships, including active/standby roles, keepalive status, and configuration synchronization counters to ensure cluster integrity.