ARUBAWIRED-INTERFACE-MIB
The ARUBAWIRED-INTERFACE-MIB enables monitoring and configuration of physical and logical interface attributes, including operational status, traffic counters, error statistics, and link parameters, on Aruba Wired networking devices.
Imported Objects
Objects
31 total| Object Name |
|---|
arubaWiredInterfaceMIBThis MIB module describes settings and properties that are applicable to interfaces MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.24 |
arubaWiredInterfaceSettings OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.24.1 |
arubaWiredInterfaceTableTable of interface entries SEQUENCE OF ArubaWiredInterfaceEntry .1.3.6.1.4.1.47196.4.1.1.3.24.1.1 |
arubaWiredInterfaceEntryAn entry containing information applicable to a particular interface. ArubaWiredInterfaceEntry .1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1 |
arubaWiredInterfaceIndexThe index value that uniquely identifies the port on which the client IP tracker entry is enabled. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1.1 |
arubaWiredInterfaceAutonegThe desired auto-negotiation setting for the interface. Note that the configured setting may be ignored if the interface is not capable of auto-negotiation.rw Enumeration .1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1.2 |
arubaWiredInterfaceDuplexThe desired duplex setting for the interface. This setting may be ignored or set to default when auto-negotiation is on.rw Enumeration .1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1.3 |
arubaWiredInterfaceSpeedsThe desired list of operating speeds for the interface. When the interface auto-negotiates speed, this is the set of speeds to offer. When the interface does not auto-negotiate, this is the speed to use. Note that the configured speeds may be ignored if they are not compatible with the interface hardware or installed transceiver.rw Bits .1.3.6.1.4.1.47196.4.1.1.3.24.1.1.1.4 |
arubaWiredIfRateTableA table that contains counters rate of the physical ports of this device. SEQUENCE OF ArubaWiredIfRateEntry .1.3.6.1.4.1.47196.4.1.1.3.24.1.2 |
arubaWiredIfRateEntryInformation about the counters rate for the physical ports of this device. ArubaWiredIfRateEntry .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1 |
arubaWiredIfRateIndexAn index that uniquely identifies a row in the physical port stat table. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.1 |
arubaWiredIfRateIntervalRate collection interval in seconds.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.2 |
arubaWiredIfRateInBytesReceived bytes per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.3 |
arubaWiredIfRateOutBytesTransmitted bytes per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.4 |
arubaWiredIfRateInBcastPktsReceived broadcast packets per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.5 |
arubaWiredIfRateInMcastPktsReceived multicast packets per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.6 |
arubaWiredIfRateInUcastPktsReceived unicast packets per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.7 |
arubaWiredIfRateInTotalPktsReceived packets per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.8 |
arubaWiredIfRateOutBcastPktsTransmitted broadcast packets per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.9 |
arubaWiredIfRateOutMcastPktsTransmitted multicast packets per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.10 |
arubaWiredIfRateOutUcastPktsTransmitted unicast packets per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.11 |
arubaWiredIfRateOutTotalPktsTransmitted packets per second over the rate interval.ro Gauge32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.12 |
arubaWiredIfRateInUtilizationInbound interface utilization over the rate interval.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.13 |
arubaWiredIfRateOutUtilizationOutbound interface utilization over the rate interval.ro Integer32 .1.3.6.1.4.1.47196.4.1.1.3.24.1.2.1.14 |
arubaWiredInterfaceConformance OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.24.2 |
arubaWiredInterfaceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.24.2.1 |
arubaWiredInterfaceConfigA collection of objects providing interface config Unknown .1.3.6.1.4.1.47196.4.1.1.3.24.2.1.1 |
arubaWiredIfRateGroupA collection of objects providing interface rate statistics Unknown .1.3.6.1.4.1.47196.4.1.1.3.24.2.1.2 |
arubaWiredInterfaceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.24.2.2 |
arubaWiredInterfaceComplianceThe compliance statement for HP Switches with support for arubaWired client IP tracker objects. Unknown .1.3.6.1.4.1.47196.4.1.1.3.24.2.2.1 |
arubaWiredIfRateComplianceThe compliance statement for HP Switches with support for arubaWired interface rate statistics. Unknown .1.3.6.1.4.1.47196.4.1.1.3.24.2.2.2 |
More MIBs from HPE/Aruba Networking Division
Browse all HPE/Aruba Networking DivisionMIBs →The ARUBAWIRED-NETWORKING-OID MIB module provides proprietary extensions for monitoring HPE Aruba Networking hardware, enabling the retrieval of device-specific operational metrics, interface statistics, and system health indicators not covered by standard SNMP MIBs.
The ARUBAWIRED-MGMD-SNOOPING-MIB enables monitoring and management of Multicast Group Management Daemon (MGMD) snooping configurations and state metrics on HPE Aruba wired network switches. This module provides visibility into multicast group memberships, snooping table entries, and interface-specific filtering states to optimize Layer 2 multicast traffic forwarding.
The ARUBAWIRED-PM-MIB enables SNMP-based monitoring and management of pluggable optical transceivers and SFP modules on Aruba wired network infrastructure, exposing critical telemetry such as optical power levels, laser bias currents, temperature, and voltage status for hardware health verification.
The ARUBAWIRED-RPVST-MIB module enables monitoring and management of Rapid Per-VLAN Spanning Tree (RPVST) protocol states, port roles, and topology changes on Aruba wired network switches. It provides visibility into VLAN-specific spanning tree instances, including root bridge election, port blocking/forwarding status, and BPDU transmission metrics for each configured VLAN.
The ARUBAWIRED-LLDP-MIB enables monitoring of Link Layer Discovery Protocol (LLDP) objects specifically for Power Source Equipment (PSE) capabilities on HPE Aruba wired network devices. This module facilitates the retrieval of power negotiation parameters, such as Power via MDI (802.3af/at) status and allocated power levels, to manage PoE distribution and device connectivity.
The ARUBAWIRED-VSX-MIB provides SNMP access to monitor and manage High Availability and Virtual Switching Extension (VSX) cluster states, synchronization status, and inter-chassis link health on HPE Aruba CX switches. It exposes specific metrics for VSX peer relationships, including active/standby roles, keepalive status, and configuration synchronization counters to ensure cluster integrity.