ARUBAWIRED-DIST-SERVICES-MIB
The ARUBAWIRED-DIST-SERVICES-MIB enables monitoring and configuration of distributed service parameters, such as QoS policies, traffic shaping rules, and service chaining attributes, specifically on ArubaOS-Switch and ArubaCX interface contexts. This module facilitates granular visibility into per-interface service application states and performance counters to ensure consistent traffic handling across the network fabric.
Imported Objects
Objects
36 total| Object Name |
|---|
arubaWiredDistServicesMIBThis MIB module describes settings and properties that are applicable to interfaces MODULE-IDENTITY .1.3.6.1.4.1.47196.4.1.1.3.25 |
arubaWiredDSMStatus OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.25.1 |
arubaWiredDSMStatusTableA table of objects that display the status of each distributed services module in the switch. SEQUENCE OF ArubaWiredDSMStatusEntry .1.3.6.1.4.1.47196.4.1.1.3.25.1.1 |
arubaWiredDSMStatusEntryTable of distributed services module entries ArubaWiredDSMStatusEntry .1.3.6.1.4.1.47196.4.1.1.3.25.1.1.1 |
arubaWiredDSMIndexThe index value that uniquely identifies the distributed services module. Unsigned32 .1.3.6.1.4.1.47196.4.1.1.3.25.1.1.1.1 |
arubaWiredDSMNameThe textual name of the distributed services module. The value of this object is the name of the module as assigned by the local device and is suitable for use in commands entered at the device's `console'.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.25.1.1.1.2 |
arubaWiredDSMDescrThe textual string containing information about the distributed services module.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.25.1.1.1.3 |
arubaWiredDSMSerialNumThe textual string containing the serial number assigned to the distributed services module.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.25.1.1.1.4 |
arubaWiredDSMProductNumThe textual string containing the product number assigned to the distributed services module.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.25.1.1.1.5 |
arubaWiredDSMPhysAddressThe address of the distributed services module at its protocol sub-layer. This normally contains a MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.47196.4.1.1.3.25.1.1.1.6 |
arubaWiredDSMOperStatusThe operational status of the distributed services module. A value of initializing(1) indicates that the module firmware is being downloaded, booted and programmed. A value of ready(2) indicates that the module is fully programmed and ready to accept traffic for processing. A value of failed(3) indicates that the module failed to initialize correctly.ro Enumeration .1.3.6.1.4.1.47196.4.1.1.3.25.1.1.1.7 |
arubaWiredDSSInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.25.2 |
arubaWiredDSSIfTableA table of objects indicating the interfaces connecting to the distributed services modules. SEQUENCE OF ArubaWiredDSSIfEntry .1.3.6.1.4.1.47196.4.1.1.3.25.2.1 |
arubaWiredDSSIfEntryTable of distributed services module entries ArubaWiredDSSIfEntry .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1 |
arubaWiredDSSModuleIndexAn integer value uniquely identifying the distributed services module that this interface is connected to. Integer32 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.1 |
arubaWiredDSSIfIndexAn integer value representing the interface number of the interface connecting to the distributed services module. Integer32 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.2 |
arubaWiredDSSIfDescrA textual string containing information about the interface.ro DisplayString .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.3 |
arubaWiredDSSIfInOctetsThe total number of octets received on the interface, including framing characters.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.4 |
arubaWiredDSSIfInUcastPktsThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.5 |
arubaWiredDSSIfInDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.6 |
arubaWiredDSSIfInErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.7 |
arubaWiredDSSIfInUnknownProtosThe number of inbound packets received via the interface which were discarded because of an unknown or unsupported protocol.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.8 |
arubaWiredDSSIfInMulticastPktsThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.9 |
arubaWiredDSSIfInBroadcastPktsThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.10 |
arubaWiredDSSIfOutOctetsThe total number of octets transmitted out of the interface, including framing characters.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.11 |
arubaWiredDSSIfOutUcastPktsThe total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.12 |
arubaWiredDSSIfOutDiscardsThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.13 |
arubaWiredDSSIfOutErrorsThe number of outbound packets that could not be transmitted because of errors.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.14 |
arubaWiredDSSIfOutMulticastPktsThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.15 |
arubaWiredDSSIfOutBroadcastPktsThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.ro Counter64 .1.3.6.1.4.1.47196.4.1.1.3.25.2.1.1.16 |
arubaWiredDSSConformance OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.25.3 |
arubaWiredDSSCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.25.3.1 |
arubaWiredDSSMibComplianceThe compliance statement for devices implementing the ARUBA WIRED Distributed Services MIB. Unknown .1.3.6.1.4.1.47196.4.1.1.3.25.3.1.1 |
arubaWiredDSSGroups OBJECT IDENTIFIER .1.3.6.1.4.1.47196.4.1.1.3.25.3.2 |
arubaWiredDSMStatusTableGroupA collection of Distributed Services Module status table objects. Unknown .1.3.6.1.4.1.47196.4.1.1.3.25.3.2.1 |
arubaWiredDSSIfTableGroupA collection of Distributed Services Interface table objects. Unknown .1.3.6.1.4.1.47196.4.1.1.3.25.3.2.2 |
More MIBs from HPE/Aruba Networking Division
Browse all HPE/Aruba Networking DivisionMIBs →The ARUBAWIRED-NETWORKING-OID MIB module provides proprietary extensions for monitoring HPE Aruba Networking hardware, enabling the retrieval of device-specific operational metrics, interface statistics, and system health indicators not covered by standard SNMP MIBs.
The ARUBAWIRED-MGMD-SNOOPING-MIB enables monitoring and management of Multicast Group Management Daemon (MGMD) snooping configurations and state metrics on HPE Aruba wired network switches. This module provides visibility into multicast group memberships, snooping table entries, and interface-specific filtering states to optimize Layer 2 multicast traffic forwarding.
The ARUBAWIRED-PM-MIB enables SNMP-based monitoring and management of pluggable optical transceivers and SFP modules on Aruba wired network infrastructure, exposing critical telemetry such as optical power levels, laser bias currents, temperature, and voltage status for hardware health verification.
The ARUBAWIRED-RPVST-MIB module enables monitoring and management of Rapid Per-VLAN Spanning Tree (RPVST) protocol states, port roles, and topology changes on Aruba wired network switches. It provides visibility into VLAN-specific spanning tree instances, including root bridge election, port blocking/forwarding status, and BPDU transmission metrics for each configured VLAN.
The ARUBAWIRED-LLDP-MIB enables monitoring of Link Layer Discovery Protocol (LLDP) objects specifically for Power Source Equipment (PSE) capabilities on HPE Aruba wired network devices. This module facilitates the retrieval of power negotiation parameters, such as Power via MDI (802.3af/at) status and allocated power levels, to manage PoE distribution and device connectivity.
The ARUBAWIRED-VSX-MIB provides SNMP access to monitor and manage High Availability and Virtual Switching Extension (VSX) cluster states, synchronization status, and inter-chassis link health on HPE Aruba CX switches. It exposes specific metrics for VSX peer relationships, including active/standby roles, keepalive status, and configuration synchronization counters to ensure cluster integrity.