Home/Catalog/APPLETALK-PRIVATE-MIB

APPLETALK-PRIVATE-MIB

Cajun Private Apple Talk Routing MIB
Main OID:
cjnAtalk.1.3.6.1.4.1.1751.2.43.2.4
134
Objects
Active
Status
3
Dependencies

Imported Objects

Objects

134 total
Object Name
cjnAtalkCajun Private Apple Talk Routing MIB
MODULE-IDENTITY
.1.3.6.1.4.1.1751.2.43.2.4
cjnAtGblGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.1
cjnAtIsEnabledEnables Apple Talk Routing services on this device.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.1.1
cjnAtGlobalStatsResetWhen set to the value enable (2) all Apple Talk Global Statistics are reset to zero after which the value of this MIB object returns to disable(1)rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.1.2
cjnAtIfZoneGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.2
cjnAtIfNextZoneIndexThe next AtIfZoneIndex value to be used to create a new row.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.2.1
cjnAtIfZoneTableA list of Apple Talk Interface Zone Entries for this entity.
SEQUENCE OF CjnAtIfZoneEntry
.1.3.6.1.4.1.1751.2.43.2.4.2.2
cjnAtIfZoneEntryThe Interface Zone Entry to a particular port.
CjnAtIfZoneEntry
.1.3.6.1.4.1.1751.2.43.2.4.2.2.1
cjnAtIfZoneIndexAn integer that is unique to the IfZoneName that is present in this entry. For any given zone name, every zipEntry that has an equal zone name will have the same IfZoneIndex.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.2.2.1.1
cjnAtIfZoneNameThe ASCII zone name of this entry.rw
OCTET STRING
.1.3.6.1.4.1.1751.2.43.2.4.2.2.1.2
cjnAtIfZoneDefaultWhen set to the value yes (1) this zone name is the default zone name for the port. When set to no(2), this zone name is not the default zone name for the port.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.2.2.1.3
cjnAtIfZoneRowStatusThe status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.2.2.1.4
cjnAtStatRtGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.3
cjnAtStatRtTableA list of Apple Talk Static Route Entries for this entity.
SEQUENCE OF CjnAtStatRtEntry
.1.3.6.1.4.1.1751.2.43.2.4.3.1
cjnAtStatRtEntryThe Static Route Entry to a particular network range.
CjnAtStatRtEntry
.1.3.6.1.4.1.1751.2.43.2.4.3.1.1
cjnAtStatRtRangeStartThe first DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.3.1.1.1
cjnAtStatRtRangeEndThe last DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order. If the network to which this routing entry pertains is a Phase 1 network or a non-extended network, the value for rtmpRangeEnd shall be two octets of zero.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.3.1.1.2
cjnAtStatRtRowStatusThe Ddp Address of the next hop in the route to this entry's destination network.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.3.1.1.3
cjnAtStatRtNextHopThe Ddp Address of the next hop in the route to this entry's destination network.rw
DdpAddress
.1.3.6.1.4.1.1751.2.43.2.4.3.1.1.4
cjnAtStatRtTypeThe type of Static Route Entry.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.3.1.1.5
cjnAtStatRtZoneGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.4
cjnAtNextStatRtZoneIndexThe next StatRtZoneIndex value to be used for row creation.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.4.1
cjnAtStatRtZoneTableA list of Apple Talk Static Route Zone Entries for this entity.
SEQUENCE OF CjnAtStatRtZoneEntry
.1.3.6.1.4.1.1751.2.43.2.4.4.2
cjnAtStatRtZoneEntryThe Zone Entry to a particular Static Route.
CjnAtStatRtZoneEntry
.1.3.6.1.4.1.1751.2.43.2.4.4.2.1
cjnAtStatRtZoneIndexAn integer that is unique to the StatRtZoneName that is present in this entry. For any given zone name, every zipEntry that has an equal zone name will have the same StatRtZoneIndex.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.4.2.1.1
cjnAtStatRtZoneNameThe ASCII zone name of this entry.rw
OCTET STRING
.1.3.6.1.4.1.1751.2.43.2.4.4.2.1.2
cjnAtStatRtZoneRowStatusThe status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.4.2.1.3
cjnAtAarp
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.5
cjnAarpResetWhen set to the value enable (2) all Apple Talk AARP Table is cleared, after which the value of this MIB object returns to disable(1)rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.5.1
cjnAarpTableThe AppleTalk Address Translation Table contains an equivalence of AppleTalk Network Addresses to the link layer physical address.
SEQUENCE OF CjnAarpEntry
.1.3.6.1.4.1.1751.2.43.2.4.5.2
cjnAarpEntryEach entry contains one AppleTalk Network Address to physical address equivalence.
CjnAarpEntry
.1.3.6.1.4.1.1751.2.43.2.4.5.2.1
cjnAarpRowStatusThe status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.5.2.1.1
cjnAarpPhysAddressThe media-dependent physical addressro
OCTET STRING
.1.3.6.1.4.1.1751.2.43.2.4.5.2.1.2
cjnAarpNetAddressThe AppleTalk Network Address corresponding to the media-dependent physical address. Note: When cjnAarpType is either broadcast or multicast, this field represents only the beginning network in the network range.ro
DdpAddress
.1.3.6.1.4.1.1751.2.43.2.4.5.2.1.3
cjnAarpDescrA text string containing information about the port. This string is intended for presentation to a human; it must not contain anything but printable ASCII characters.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.5.2.1.4
cjnAarpTypeThe type of this AARP entry.ro
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.5.2.1.5
cjnAarpTtlThe TTL of this AARP entry.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.5.2.1.6
cjnAtRtmp
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.6
cjnRtmpResetWhen set to the value enable (2) all Apple Talk Route Table is cleared, after which the value of this MIB object returns to disable(1)rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.6.1
cjnRtmpTableA list of Routing Table Maintenance Protocol entries for this entity.
SEQUENCE OF CjnRtmpEntry
.1.3.6.1.4.1.1751.2.43.2.4.6.2
cjnRtmpEntryThe route entry to a particular network range.
CjnRtmpEntry
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1
cjnRtmpRangeStartThe first DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1.1
cjnRtmpRangeEndThe last DDP network address in the network range to which this routing entry pertains. This is a two octet DDP network address in network byte order. If the network to which this routing entry pertains is a Phase 1 network or a non-extended network, the value for rtmpRangeEnd shall be two octets of zero.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1.2
cjnRtmpNextHopThe next hop in the route to this entry's destination network.ro
DdpAddress
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1.3
cjnRtmpHopsThe number of hops required to reach the destination network to which this routing entry pertains.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1.4
cjnRtmpStateThe status of the information contained in this route entry. Setting this object to the value bad(4) has the effect of invalidating the corresponding entry in the rtmpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant rtmpState object.ro
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1.5
cjnRtmpOwnerThe Owner of this Route Entry.ro
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1.6
cjnRtmpDescrA text string containing information about the port used to forward to the next hop. This string is intended for presentation to a human; it must not contain anything but printable ASCII characters.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1.7
cjnRtmpRowStatusThe status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.6.2.1.8
cjnAtZip
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.7
cjnZipTableThe table of zone information for reachable AppleTalk networks.
SEQUENCE OF CjnZipEntry
.1.3.6.1.4.1.1751.2.43.2.4.7.1
cjnZipEntryAn entry of zone information for a particular zone and network combination.
CjnZipEntry
.1.3.6.1.4.1.1751.2.43.2.4.7.1.1
cjnZipZoneIndexAn integer that is unique to the zipZoneName that is present in this entry. For any given zone name, every zipEntry that has an equal zone name will have the same zipZoneIndex.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.7.1.1.1
cjnZipZoneNameThe ASCII zone name of this entry.ro
OCTET STRING
.1.3.6.1.4.1.1751.2.43.2.4.7.1.1.2
cjnZipZoneNetStartThe network that starts the range for this entry. This address is a two octet DDP network address in network byte order.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.7.1.1.3
cjnZipZoneNetEndThe network that ends the range for this entry. This address is a two octet DDP network address in network byte order. If the network to which this zip entry pertains is a Phase 1 network or a non-extended network, the value for zipZoneNetEnd shall be two bytes of zero.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.7.1.1.4
cjnAtNbp
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.8
cjnNbpTableThe table of NBP services registered on this entity.
SEQUENCE OF CjnNbpEntry
.1.3.6.1.4.1.1751.2.43.2.4.8.1
cjnNbpEntryThe description of an NBP service registered on this entity.
CjnNbpEntry
.1.3.6.1.4.1.1751.2.43.2.4.8.1.1
cjnNbpIndexThe index of this NBP entry. This value ranges from 1 to the number of NBP entries currently registered on this entity.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.8.1.1.1
cjnNbpObjectThe name of the service described by this entity.ro
OCTET STRING
.1.3.6.1.4.1.1751.2.43.2.4.8.1.1.2
cjnNbpTypeThe type of the service described by this entity.ro
OCTET STRING
.1.3.6.1.4.1.1751.2.43.2.4.8.1.1.3
cjnNbpZoneThe zone the service described by this entity is registered in.ro
OCTET STRING
.1.3.6.1.4.1.1751.2.43.2.4.8.1.1.4
cjnNbpStateThe state of this NBP entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the nbpTable. That is, it effectively disassociates the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive from agents tabular information corresponding to entries not currently in use. Proper interpretation of such entries requires examination of the relevant nbpState object.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.8.1.1.5
cjnAtEcho
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.9
cjnAtEchoRequestsThe number of AppleTalk echo requests received.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.9.1
cjnAtEchoRepliesThe number of AppleTalk echo replies sent.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.9.2
cjnAtEchoTimeoutsThe number of AppleTalk echo request timeouts.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.9.3
cjnAtEchoSendCauses an Apple Talk Echo Request to be sent to the supplied Apple Talk Address.rw
DdpAddress
.1.3.6.1.4.1.1751.2.43.2.4.9.4
cjnAtEchoResetWhen set to the value enable (2) all Apple Talk Echo Counters are reset to zero after which the value of this MIB object returns to disable(1)rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.9.5
cjnAtGblStatsGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.10
cjnAtDdp
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.10.1
cjnDdpOutRequestsThe total number of DDP datagrams which were supplied to DDP by local DDP clients in requests for transmission. Note that this counter does not include any datagrams counted in ddpForwRequests.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.1
cjnDdpOutShortsThe total number of short DDP datagrams which were transmitted from this entity.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.2
cjnDdpOutLongsThe total number of long DDP datagrams which were transmitted from this entity.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.3
cjnDdpInReceivesThe total number of input datagrams received by DDP, including those received in error.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.4
cjnDdpForwRequestsThe number of input datagrams for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward them to that final destination.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.5
cjnDdpInLocalDatagramsThe total number of input DDP datagrams for which this entity was their final DDP destination.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.6
cjnDdpNoProtocolHandlersThe total number of DDP datagrams addressed to this entity that were addressed to an upper layer protocol for which no protocol handler existed.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.7
cjnDdpOutNoRoutesThe total number of DDP datagrams dropped because a route could not be found to their final destination.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.8
cjnDdpTooShortErrorsThe total number of input DDP datagrams dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.9
cjnDdpTooLongErrorsThe total number of input DDP datagrams dropped because the received data length was greater than the data length specified in the DDP header or because they exceeded the maximum DDP datagram size.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.10
cjnDdpBroadcastErrorsThe total number of input DDP datagrams dropped because this entity was not their final destination and they were addressed to the link level broadcast.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.11
cjnDdpShortDDPErrorsThe total number of input DDP datagrams dropped because this entity was not their final destination and their type was short DDP.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.12
cjnDdpHopCountErrorsThe total number of input DDP datagrams dropped because this entity was not their final destination and their hop count would exceed 15.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.13
cjnDdpChecksumErrorsThe total number of input DDP datagrams dropped because of a checksum error.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.14
cjnDdpAarpRqRcvThe total number of input AARP Requests Received.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.15
cjnDdpAarpReplyRcvThe total number of input AARP Replies Received.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.16
cjnDdpAarpRqTxThe total number of output AARP Requests Transmitted.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.17
cjnDdpAarpReplyTxThe total number of output AARP Replies Transmitted.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.18
cjnDdpAarpBadPduThe total number of bad AARP PDU.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.19
cjnDdpCfgAddrErrorThe total number of configuration address errors.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.20
cjnDdpCfgZoneErrorThe total number of configuration zone errors.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.21
cjnDdpEchoRqRcvThe total number of input Echo Requests Received.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.22
cjnDdpEchoReplyRcvThe total number of input Echo Replies Received.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.23
cjnDdpEchoRqTxThe total number of output Echo Requests Transmitted.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.10.1.24
cjnAtPortConfGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.11
cjnAtPortNextIndexThe next cjnAtPortIndex to be used for row creation.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.11.1
cjnAtPortTableA list of Cajun AppleTalk ports for this entity.
SEQUENCE OF CjnAtPortEntry
.1.3.6.1.4.1.1751.2.43.2.4.11.2
cjnAtPortEntryThe description of one of the Cajun AppleTalk ports on this entity.
CjnAtPortEntry
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1
cjnAtPortIndexA unique value for each AppleTalk port. Its value is between 1 and the total number of AppleTalk ports. The value for each port must remain constant at least from the re-initialization of the entity's network management system to the next re-initialization.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.1
cjnAtPortRowStatusThe Status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.2
cjnAtPortDescrA text string containing information about the port. This string is intended for presentation to a human; it must not contain anything but printable ASCII characters.rw
DisplayString
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.3
cjnAtPortMetricThe metric assigned to this port.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.4
cjnAtPortFrameTypeThe type of Ethernet Frames to be used by the port for Apple Talk.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.5
cjnAtPortNetStartThe first AppleTalk network address in the range configured for this port. This is a two octet DDP network address in network byte order.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.6
cjnAtPortNetEndThe last AppleTalk network address in the range configured for this port. This is a two octet DDP network address in network byte order. If the network to which this AppleTalk port is connected is a Phase 1 network or a non-extended network, the value for atportNetEnd shall be two octets of zero.rw
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.7
cjnAtPortNetAddressThe AppleTalk network address configured for this port.rw
DdpAddress
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.8
cjnAtPortAdminStateThe configuration status of this port.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.9
cjnAtPortIfIndexThe physical interface associated with this Appletalk port. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.10
cjnAtPortVlanThe vlan associated with this AppleTalk port.rw
DisplayString
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.11
cjnAtPortClearZonesset to enabled will clear all zones on this at port.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.11.2.1.12
cjnAtPortStateGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.12
cjnAtPortStateTableA list of interface specific Apple Talk Port State Entries
SEQUENCE OF CjnAtPortStateEntry
.1.3.6.1.4.1.1751.2.43.2.4.12.3
cjnAtPortStateEntryAn cajun Apple Talk Port State instance
CjnAtPortStateEntry
.1.3.6.1.4.1.1751.2.43.2.4.12.3.1
cjnAtPortStateIndexThe globally unique value for this Apple Talk Port. This number MUST exist in the cjnIpIfTable ?? to be valid.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.12.3.1.1
cjnAtPortStateDescrA text string containing information about the port. This string is intended for presentation to a human; it must not contain anything but printable ASCII characters.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.12.3.1.2
cjnAtPortStateNetConfigThe configuration status of this port.ro
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.12.3.1.3
cjnAtPortStateNetStartThe first AppleTalk network address in the range currently used for this port. This is a two octet DDP network address in network byte order.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.12.3.1.4
cjnAtPortStateNetEndThe last AppleTalk network address in the range currently used for this port. This is a two octet DDP network address in network byte order. If the network to which this AppleTalk port is connected is a Phase 1 network or a non-extended network, the value for atportNetEnd shall be two octets of zero.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.12.3.1.5
cjnAtPortStateNetAddressThe AppleTalk network address being used on this port.ro
DdpAddress
.1.3.6.1.4.1.1751.2.43.2.4.12.3.1.6
cjnAtPortStateStateThe operational status of this port.ro
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.12.3.1.7
cjnAtFilterGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.13
cjnAtFilterTableA list of Apple Talk Filters for this entity.
SEQUENCE OF CjnAtFilterEntry
.1.3.6.1.4.1.1751.2.43.2.4.13.1
cjnAtFilterEntryThe Filters defined.
CjnAtFilterEntry
.1.3.6.1.4.1.1751.2.43.2.4.13.1.1
cjnAtFilterIndexAn integer that is unique to the Filter that is present in this entry.ro
INTEGER
.1.3.6.1.4.1.1751.2.43.2.4.13.1.1.1
cjnAtFilterRowStatusThe status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.13.1.1.2
cjnAtFilterItemWhen set to the value zone_name(1) this filter applies to zone names. When set to nbp_object(2), this filter applies to nbp object names.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.13.1.1.3
cjnAtFilterOperationWhen set to the value permit(1) objects with this name will not be filtered. When set to no(2), objects with this name will be filtered.rw
Enumeration
.1.3.6.1.4.1.1751.2.43.2.4.13.1.1.4
cjnAtFilterStringThe ASCII name of the entry to be filtered. When FilterItem is zone_name(1), string is the name of the zone to be filtered. When FilterItem is nbp_object(2), string is the name of the nbp object to be filtered.rw
OCTET STRING
.1.3.6.1.4.1.1751.2.43.2.4.13.1.1.5
cjnAtAccessIfGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.1751.2.43.2.4.14
cjnAtAccessIfTableA list of Apple Talk Filters on Apple Talk Interfaces.
SEQUENCE OF CjnAtAccessIfEntry
.1.3.6.1.4.1.1751.2.43.2.4.14.1
cjnAtAccessIfEntryThe Zone Filters defined.
CjnAtAccessIfEntry
.1.3.6.1.4.1.1751.2.43.2.4.14.1.1
cjnAtAccessIfRowStatusThe status of this entry in the table. Note the available states: active(1), -- Obviously Active on this interface. notInService(2) -- Configured on Interface but disabled. notReady(3), -- Interface entry NOT FULLY configured. createAndGo(4), -- NOT SUPPORTED. createAndWait(5) or destroy(6)rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.1751.2.43.2.4.14.1.1.1