APERTUS-UA-RESPONSE-TIME-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for APERTUS-UA-RESPONSE-TIME-MIB.
32
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
32 total| Object Name |
|---|
internet OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1 |
directory OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.1 |
mgmt OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.2 |
experimental OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.3 |
private OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4 |
enterprises OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1 |
apertus OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543 |
isg OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3 |
aperua OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3 |
aperresponsetime OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5 |
aperResponseTimeMIB OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1 |
aperResponseTimeMIBObjects OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1 |
aperResponseTimeConfig OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.1 |
aperResponseTimeConfigStatusStatus of Universal Access serverro Enumeration .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.1.1 |
aperResponseTimeConfigUpTimeThis value represents the time elapsed since the server
was started in 1/100nths of a second.ro TimeTicks (SNMPv2-SMI) .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.1.2 |
aperResponseTimeDomain OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.2 |
aperResponseTimeDomainTableDomain information broken down domain name. SEQUENCE OF AperResponseTimeDomainEntry .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.2.1 |
aperResponseTimeDomainEntryThis table contains information on each of the load balance
domains under its control. AperResponseTimeDomainEntry .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.2.1.1 |
aperResponseTimeDomainNameThe zone name for this load-balance domain.ro DisplayString (SNMPv2-TC) .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.2.1.1.1 |
aperResponseTimeDomainUpServersThe number of servers that are up at this time.ro INTEGER ( -2147483648..2147483647 ) .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.2.1.1.2 |
aperResponseTimeDomainDownServersThe number of servers in list that are marked as down at this
time.ro INTEGER ( -2147483648..2147483647 ) .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.2.1.1.3 |
aperResponseTimeDomainCompareMethodHow the ...NodeWindow field is interpreted. If the compare
method is absolute, the values are compared by absolute
adjustments to the response time. (EG, a 10ms response time
with a window of 40 in a absolute domain will have an effective
compare time of 50ms). A percentage domain indicates that
the values are offset by the given percentage. (EG, a 20ms
responsetime with a window of 400 will have am effective compare
time of 80ms). Note that to leave a value unadjusted, the
window needs to be 100.ro Enumeration .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.2.1.1.4 |
aperResponseTimeNode OBJECT IDENTIFIER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3 |
aperResponseTimeNodeTableNode information broken down domain name and IP address SEQUENCE OF AperResponseTimeNodeEntry .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1 |
aperResponseTimeNodeEntryThis table contains information on each of the machines
in the different laod balance zones. AperResponseTimeNodeEntry .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1.1 |
aperResponseTimeNodeNameThe zone name for this Node.ro DisplayString (SNMPv2-TC) .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1.1.1 |
aperResponseTimeNodeIPThe IP address of the NODE.ro IpAddress .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1.1.2 |
aperResponseTimeNodeWindowThe window offset for this node vs other nodes within the same
pool level. Please see the description for the domain field
...CompareMethod for more information on this fields usage.ro INTEGER (0..2147483647 ) .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1.1.3 |
aperResponseTimeNodePoolIndexThis value is the pool index. When all nodes with a lower index
are down, the items with next highest pool index are considered
for responseTime usage.ro INTEGER .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1.1.4 |
aperResponseTimeNodeStatusIndicates the status of the node. Up(1) shows that the node is
up and is being considered for use. Down(2) indicates that
the last query to the NODE image resulted in a down marker for
the node. Admindown(3) indicates that an administrator took
the node offline manually (from the UA server end).
Notqueried(4) is used to indicate that a node has never been
queried.ro Enumeration .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1.1.5 |
aperResponseTimeNodeResponseTimeResponse time in MS of last node access. A value of 0 is
returned if NodeStatus is not ready(1) or if the node
has never been queriedro TimeTicks (SNMPv2-SMI) .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1.1.6 |
aperResponseTimeNodeAdjustedCompareValueResponse time as adjusted by the window value.ro TimeTicks (SNMPv2-SMI) .1.1.3.6.1.4.1.42359.2.2.1.2.3.1.3.6.6.1.4.1.543.3.3.5.1.1.3.1.1.7 |