ALTEON-TS-LAYER4-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ALTEON-TS-LAYER4-MIB.
897
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
897 total| Object Name |
|---|
slbStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.2 |
slbStatPortMaintTableThe table of SLB port maintenance statistics. SEQUENCE OF SlbStatPortMaintEntry .1.3.6.1.4.1.641.6.4.2.1 |
slbStatPortMaintEntryA row in the SLB port maintenance statistcs table. SlbStatPortMaintEntry .1.3.6.1.4.1.641.6.4.2.1.1 |
slbStatPortMaintPortIndexThe port number for which the statistics apply.ro INTEGER .1.3.6.1.4.1.641.6.4.2.1.1.1 |
slbStatPortMaintCurBindingsThe current number of bindings on the port.ro Gauge .1.3.6.1.4.1.641.6.4.2.1.1.2 |
slbStatPortMaintBindingFailsThe total number of Binding failures on the port. A Binding Failure
occurs when a port runs out of binding table entries.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.3 |
slbStatPortMaintNonTcpFramesThe total number of non-TCP/IP frames dropped on the port.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.4 |
slbStatPortMaintTcpFragmentsThe total number of TCP fragments dropped on the port.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.5 |
slbStatPortMaintUdpDatagramsThe total number of UDP datagrams dropped on the port.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.6 |
slbStatPortMaintIncorrectVIPsThe total number of frames with incorrect VIPs that are dropped on
the port.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.7 |
slbStatPortMaintIncorrectVportsThe total number of frames with incorrect Virtual Port
that are dropped on the port.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.8 |
slbStatPortMaintRealServerNoAvailsThe total number of frames that are dropped on the port
because no real server is available.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.9 |
slbStatPortMaintFilteredDeniedFramesThe total number of frames that are denied on the port by the filter.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.10 |
slbStatPortMaintCurBindings4SecondsThe 4 second average current number of bindings on the port.ro Gauge .1.3.6.1.4.1.641.6.4.2.1.1.11 |
slbStatPortMaintCurBindings64SecondsThe 64 second average current number of bindings on the port.ro Gauge .1.3.6.1.4.1.641.6.4.2.1.1.12 |
slbStatPortMaintVMAdiscardsThe total number of internal VMA frames dropped by the port.ro Counter .1.3.6.1.4.1.641.6.4.2.1.1.13 |
slbStatPortRealServerTableThe port-server statistics table. This table shows the statistics
of real servers that are connectted to switch ports. SEQUENCE OF SlbStatPortRealServerEntry .1.3.6.1.4.1.641.6.4.2.2 |
slbStatPortRealServerEntryA row in the port-server statistics table. SlbStatPortRealServerEntry .1.3.6.1.4.1.641.6.4.2.2.1 |
slbStatPortRealServerPortIndexThe port number that identifies the switch port.ro INTEGER .1.3.6.1.4.1.641.6.4.2.2.1.1 |
slbStatPortRealServerServerIndexThe real server number that identifies the server.ro INTEGER .1.3.6.1.4.1.641.6.4.2.2.1.2 |
slbStatPortRealServerCurrSessionsThe current sessions for the real server.ro Gauge .1.3.6.1.4.1.641.6.4.2.2.1.3 |
slbStatPortRealServerTotalSessionsThe total number of sessions for the real server.ro Counter .1.3.6.1.4.1.641.6.4.2.2.1.4 |
slbStatPortRealServerHCOctetsThe total number of octets received and transmitted out of the real
server on a particular port.roobsolete Counter64 .1.3.6.1.4.1.641.6.4.2.2.1.5 |
slbStatPortRealServerHCOctetsLow32The lower 32 bit value of the total octets received and transmitted
out of the real server on a particular port.ro Counter .1.3.6.1.4.1.641.6.4.2.2.1.6 |
slbStatPortRealServerHCOctetsHigh32The higher 32 bit value of the total octets received and transmitted
out of the real server on a particular port.ro Counter .1.3.6.1.4.1.641.6.4.2.2.1.7 |
slbStatMaintBackupServActsThe total number of times that backup servers become active due
to failure of primary servers.ro Counter .1.3.6.1.4.1.641.6.4.2.3 |
slbStatMaintOverflowServActsThe total number of times that backup servers become
active due to primary servers reach overflow situation.ro Counter .1.3.6.1.4.1.641.6.4.2.4 |
slbStatRServerTableThe real server statistics table. SEQUENCE OF SlbStatRServerEntry .1.3.6.1.4.1.641.6.4.2.5 |
slbStatRServerEntryThe statistics of a particular real server. SlbStatRServerEntry .1.3.6.1.4.1.641.6.4.2.5.1 |
slbStatRServerIndexThe real server number that identifies the server.ro INTEGER .1.3.6.1.4.1.641.6.4.2.5.1.1 |
slbStatRServerCurrSessionsThe number of sessions that are currently handled by the real server.ro Gauge .1.3.6.1.4.1.641.6.4.2.5.1.2 |
slbStatRServerTotalSessionsThe total number of sessions that are handled by the real server.ro Counter .1.3.6.1.4.1.641.6.4.2.5.1.3 |
slbStatRServerFailuresThe total number of times that the real server is claimed down.ro Counter .1.3.6.1.4.1.641.6.4.2.5.1.4 |
slbStatRServerHighestSessionsThe highest sessions that have been handled by the real server.ro Counter .1.3.6.1.4.1.641.6.4.2.5.1.5 |
slbStatRServerHCOctetsThe total number of octets received and transmitted out of the real
server.roobsolete Counter64 .1.3.6.1.4.1.641.6.4.2.5.1.6 |
slbStatRServerHCOctetsLow32The lower 32 bit value of octets received and transmitted out of the
real server.ro Counter .1.3.6.1.4.1.641.6.4.2.5.1.7 |
slbStatRServerHCOctetsHigh32The higher 32 bit value of octets received and transmitted out
of the real server.ro Counter .1.3.6.1.4.1.641.6.4.2.5.1.8 |
slbStatGroupTableThe real server group statistics table. SEQUENCE OF SlbStatGroupEntry .1.3.6.1.4.1.641.6.4.2.6 |
slbStatGroupEntryThe statistics of a particular real server group. SlbStatGroupEntry .1.3.6.1.4.1.641.6.4.2.6.1 |
slbStatGroupIndexThe real server group number that identifies the group.ro INTEGER .1.3.6.1.4.1.641.6.4.2.6.1.1 |
slbStatGroupCurrSessionsThe number of sessions that are currently handled by the real server
group.ro Gauge .1.3.6.1.4.1.641.6.4.2.6.1.2 |
slbStatGroupTotalSessionsThe total number of sessions that are handled by the real
server group.ro Counter .1.3.6.1.4.1.641.6.4.2.6.1.3 |
slbStatGroupHighestSessionsThe highest sessions that have been handled by the real server group.ro Counter .1.3.6.1.4.1.641.6.4.2.6.1.4 |
slbStatGroupHCOctetsThe total number of octets received and transmitted out of the real
server group.roobsolete Counter64 .1.3.6.1.4.1.641.6.4.2.6.1.5 |
slbStatGroupHCOctetsLow32The lower 32 bit value of octets received and transmitted out of the
real server group.ro Counter .1.3.6.1.4.1.641.6.4.2.6.1.6 |
slbStatGroupHCOctetsHigh32The higher 32 bit value of octets received and transmitted out
of the real server group.ro Counter .1.3.6.1.4.1.641.6.4.2.6.1.7 |
slbStatVServerTableThe virtual server statistics table. SEQUENCE OF SlbStatVServerEntry .1.3.6.1.4.1.641.6.4.2.7 |
slbStatVServerEntryThe statistics of a particular virtual server group. SlbStatVServerEntry .1.3.6.1.4.1.641.6.4.2.7.1 |
slbStatVServerIndexThe virtual server number that identifies the server.ro INTEGER .1.3.6.1.4.1.641.6.4.2.7.1.1 |
slbStatVServerCurrSessionsThe number of sessions that are currently handled by the
virtual server.ro Gauge .1.3.6.1.4.1.641.6.4.2.7.1.2 |
slbStatVServerTotalSessionsThe total number of sessions that are handled by the virtual server.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.3 |
slbStatVServerHighestSessionsThe highest sessions that have been handled by the virtual server.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.4 |
slbStatVServerHCOctetsThe total number of octets received and transmitted out of the
virtual server.roobsolete Counter64 .1.3.6.1.4.1.641.6.4.2.7.1.5 |
slbStatVServerHCOctetsLow32The lower 32 bit value of octets received and transmitted out
of the virtual server.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.6 |
slbStatVServerHCOctetsHigh32The higher 32 bit value of octets received and transmitted out
of the virtual server.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.7 |
slbStatVServerHeaderHitsThe current HTTP header hits.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.8 |
slbStatVServerHeaderMissesThe current HTTP header misses.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.9 |
slbStatVServerHeaderTotalSessionsThe total HTTP header sessions.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.10 |
slbStatVServerCookieRewritesThe total Cookie Rewrites.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.11 |
slbStatVServerCookieInsertsThe total Cookie Inserts.ro Counter .1.3.6.1.4.1.641.6.4.2.7.1.12 |
slbMaintStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.2.8 |
slbIncorrectVirtServsIncorrect Virtual Servers specified for Server Load Balancing.ro Counter .1.3.6.1.4.1.641.6.4.2.8.1 |
slbIncorrectVportsIncorrect Virtual ports specified for Server Load Balancing.ro Counter .1.3.6.1.4.1.641.6.4.2.8.2 |
slbNoRealServsNo Real Servers specified for Server Load Balancing.ro Counter .1.3.6.1.4.1.641.6.4.2.8.3 |
wapMaintStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.2.8.4 |
radiusAcctReqsStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.2.8.4.1 |
radiusAcctReqsRadius Account Request.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.1 |
radiusAcctWrapReqsRadius Account Wrap Request.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.2 |
radiusAcctStartReqsRadius Account Start Request.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.3 |
radiusAcctUpdateReqsRadius Account Update Request.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.4 |
radiusAcctStopReqsRadius Account stop Request.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.5 |
radiusAcctBadReqsRadius Account Bad Request.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.6 |
radiusAcctAddSessionReqsRadius Account add session Request.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.7 |
radiusAcctDeleteSessionReqsRadius Account delete session Request.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.8 |
radiusAcctReqFailsQFullRadius Account request fails Queue Full.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.9 |
radiusAcctReqFailsSPDeadRadius Account request fails SP Dead.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.10 |
radiusAcctReqFailsDMAFailsRadius Account request fails DMA fails.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.11 |
radiusAcctMaxEntriesInUseRadius Account Maximum Entries in use.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.1.12 |
tpcpAddSessReqsStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.2.8.4.2 |
tpcpAddSessReqsWAP add Session requests.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.2.1 |
tpcpAddSessReqsFailsQFullWAP add Session Fails as the Queue is Full.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.2.2 |
tpcpAddSessReqsFailsSPDeadWAP add Session Fails as the SP is dead.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.2.3 |
tpcpAddSessReqsEntriesInUseWAP add Session Entries currently in use.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.2.4 |
tpcpAddSessReqsMaxEntriesInUseThe allowable maximum number of WAP add Session Entries.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.2.5 |
tpcpDeleteSessReqsStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.2.8.4.3 |
tpcpDeleteSessReqsTPCP Delete Session Requests.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.3.1 |
tpcpDeleteSessReqsFailsQFullTPCP Delete Session Fails as the Queue is Full.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.3.2 |
tpcpDeleteSessReqsFailsSPDeadTPCP Delete Session Fails as the SP is dead.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.3.3 |
tpcpDeleteSessReqsEntriesInUseTPCP Delete Session Entries currently in use.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.3.4 |
tpcpDeleteSessReqsMaxEntriesInUseThe allowable maximum number of TPCP delete Session Entries.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.3.5 |
wapRequestToWrongSPThe WAP delete Session Entries sent to wrong SP.ro Counter .1.3.6.1.4.1.641.6.4.2.8.4.4 |
filterStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.6 |
fltStatTableThe filter statistics table. SEQUENCE OF FltStatTableEntry .1.3.6.1.4.1.641.6.4.6.1 |
fltStatTableEntryA row in filter statistics table. FltStatTableEntry .1.3.6.1.4.1.641.6.4.6.1.1 |
fltStatFltIndexThe number that identifies the filter.ro INTEGER .1.3.6.1.4.1.641.6.4.6.1.1.1 |
fltStatFltFiringsThe number of instances that the received packet matches the
filter rule.ro Counter .1.3.6.1.4.1.641.6.4.6.1.1.2 |
gslbStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.7 |
gslbStatRemRealServerTableThe GSLB remote real server statistics table. SEQUENCE OF GslbStatRemRealServerEntry .1.3.6.1.4.1.641.6.4.7.1 |
gslbStatRemRealServerEntryA row in the remote real server statistics table. GslbStatRemRealServerEntry .1.3.6.1.4.1.641.6.4.7.1.1 |
gslbStatRemRealServerIndexThe server number that identifies the remote real server.ro INTEGER .1.3.6.1.4.1.641.6.4.7.1.1.1 |
gslbStatRemRealServerDnsHandoffsThe number of DNS hanfoffs by the remote real server.ro Counter .1.3.6.1.4.1.641.6.4.7.1.1.2 |
gslbStatRemRealServerHttpRedirsThe number of HTTP redirections by the remote real server.ro Counter .1.3.6.1.4.1.641.6.4.7.1.1.3 |
gslbMaintStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.8 |
gslbStatMaintInGoodSiteUpdatesThe number of good remote site updates which are received.ro Counter .1.3.6.1.4.1.641.6.4.8.1 |
gslbStatMaintInBadSiteUpdatesThe number of bad remote site updates which are received.ro Counter .1.3.6.1.4.1.641.6.4.8.2 |
urlStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.10 |
urlRedirStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.10.1 |
urlStatRedRedirsThe number of instances that the received packet matches the
specified URL expressions and redirected to specified group of
real servers.ro Counter .1.3.6.1.4.1.641.6.4.10.1.1 |
urlStatRedOrigSrvsThe number of instances that the received packet is sent to the
origin server due to mis-match with the specified URL expressions
or detecting of HTTP non-GETs,user cookies, and no-cache as users
configuration.ro Counter .1.3.6.1.4.1.641.6.4.10.1.2 |
urlStatRedNonGetsThe number of instances that the received packet contains
none GETs(POST ,HEAD ,PUT..) methods.ro Counter .1.3.6.1.4.1.641.6.4.10.1.3 |
urlStatRedCookieThe number of instances that the received packet contains
a 'Cookie: ' header.ro Counter .1.3.6.1.4.1.641.6.4.10.1.4 |
urlStatRedNoCacheThe number of instances that the received packet contains
a no-cache header value.ro Counter .1.3.6.1.4.1.641.6.4.10.1.5 |
urlSlbStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.10.2 |
urlStatSlbPathTableThe statistics table of instances that URL pathes matched. SEQUENCE OF UrlStatSlbPathTableEntry .1.3.6.1.4.1.641.6.4.10.2.1 |
urlStatSlbPathTableEntryInformation about the number of instances that are
load-balanced due to match of a particular URL path. UrlStatSlbPathTableEntry .1.3.6.1.4.1.641.6.4.10.2.1.1 |
urlStatSlbPathIndexThe URL path table index.ro INTEGER .1.3.6.1.4.1.641.6.4.10.2.1.1.1 |
urlStatSlbPathHitsThe number of instances that are load-balanced due to match of
the particular URL path.ro Counter .1.3.6.1.4.1.641.6.4.10.2.1.1.2 |
tcpStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.11 |
tcpStatCurConnsThe number of outstanding TCP current connections have been
established.ro Gauge .1.3.6.1.4.1.641.6.4.11.1 |
tcpStatHalfOpensThe number of outstanding TCP connections have been half opened.
This statistics is valid only when URL parsing has been truned on.
It is incremented when the switch respond to TCP SYN packet and
decremented upon receiving TCP SYN ACK packet from the requester.ro Gauge .1.3.6.1.4.1.641.6.4.11.2 |
ftpStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.14 |
ftpSlbStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.14.1 |
ftpSlbStatTotalThe total number of ftp control sesssion for SLB received after
FTP parsing turn on.ro Counter .1.3.6.1.4.1.641.6.4.14.1.1 |
ftpNatStatTotalThe total number of FTP control session for NAT received after
active FTP is turn on.ro Counter .1.3.6.1.4.1.641.6.4.14.1.2 |
rurlStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.18 |
rurlErrorStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.18.1 |
rurlErrorStatConnectTotal number of session connect errors to the iSD.ro Counter .1.3.6.1.4.1.641.6.4.18.1.1 |
rurlErrorStatPackTotal number of errors associated with packaging the RURL data
frame received from the iSD.ro Counter .1.3.6.1.4.1.641.6.4.18.1.2 |
rurlErrorStatUnpackTotal number of errors associated with unpackaging the RURL data
frame received from the iSD.ro Counter .1.3.6.1.4.1.641.6.4.18.1.3 |
rurlErrorStatDmaTotal number of DMA write errors.ro Counter .1.3.6.1.4.1.641.6.4.18.1.4 |
rurlErrorStatBufTotal number of errors associated with no available buffers to
to store the RURL redirection information.ro Counter .1.3.6.1.4.1.641.6.4.18.1.5 |
rurlErrorStatBufWrapTotal number of errors associated with buffer wrap copies.ro Counter .1.3.6.1.4.1.641.6.4.18.1.6 |
rurlErrorStatProtoTotal number of errors associated with packets containing an
invalid protocol type. Expected protocol types are TCP and UDP.ro Counter .1.3.6.1.4.1.641.6.4.18.1.7 |
rurlInfoStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.18.2 |
rurlInfoStatClientWrapTotal number of client packets processed using frame wrap buffers.ro Counter .1.3.6.1.4.1.641.6.4.18.2.1 |
rurlInfoStatServerWrapTotal number of server packets processed using frame wrap buffers.ro Counter .1.3.6.1.4.1.641.6.4.18.2.2 |
rurlInfoStatBufWrapTotal number of packets processed using RURL wrap copy mechanism.ro Counter .1.3.6.1.4.1.641.6.4.18.2.3 |
rurlInfoStatFreeRingCallsTotal number of RURL sequence buffer frees.ro Counter .1.3.6.1.4.1.641.6.4.18.2.4 |
rurlInfoStatClientResetsTotal number of client resets by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.5 |
rurlInfoStatServerResetsTotal number of server resets by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.6 |
rurlInfoStatFramePassThruTotal number of packets dropped to L2 processing due to the switch
running out of resources.ro Counter .1.3.6.1.4.1.641.6.4.18.2.7 |
rurlInfoStatParseFiltMissTotal number of packets leaking from RURL parsing to URL parsing.ro Counter .1.3.6.1.4.1.641.6.4.18.2.8 |
rurlInfoStatExceedBufLenTotal number of occurences where the client request bytes exceed the
maximum buffer size allocated by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.9 |
rurlInfoStatExceedFrameDepthTotal number of occurences where the client request bytes exceed the
maximum buffer depth allocated by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.10 |
rurlInfoStatZeroContentLenTotal number of occurences where the Content-Length of the HTTP
request is zero.ro Counter .1.3.6.1.4.1.641.6.4.18.2.11 |
rurlInfoStatNonTypicalOffsetsTotal number of occurences where the RURL header offsets are
non-typical.ro Counter .1.3.6.1.4.1.641.6.4.18.2.12 |
rurlInfoStatFINRSTSessSetupTotal number of occurences where a FIN or RST packet is used to
establish a new session in the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.13 |
rurlInfoStatPSHSessSetupTotal number of occurences where a PSH packet is used to
establish a new session in the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.14 |
rurlInfoStatNonSYNSessSetupTotal number of occurences where a non-SYN packet is used to
establish a new session in the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.15 |
rurlInfoStatL7BindCallsTotal number of requests to bind a session.ro Counter .1.3.6.1.4.1.641.6.4.18.2.16 |
rurlInfoStatSessSetupsTotal number of RURL session setups encountered.ro Counter .1.3.6.1.4.1.641.6.4.18.2.17 |
rurlInfoStatMiscProcessTotal number of sessions falling through the filter processing.ro Counter .1.3.6.1.4.1.641.6.4.18.2.18 |
rurlInfoStatClientPktsInTotal number of client packets processed by the RURL filter.ro Counter .1.3.6.1.4.1.641.6.4.18.2.19 |
rurlInfoStatClientSYNsInTotal number of client SYN packets processed by the RURL filter.ro Counter .1.3.6.1.4.1.641.6.4.18.2.20 |
rurlInfoStatClientReTXSYNsSeenTotal number of client retransmitted SYN packets processed by
the RURL filter.ro Counter .1.3.6.1.4.1.641.6.4.18.2.21 |
rurlInfoStatClientSYNACKsSentTotal number of switch-to-client SYN/ACK packets processed by
the RURL filter.ro Counter .1.3.6.1.4.1.641.6.4.18.2.22 |
rurlInfoStatClientACKsInTotal number of client ACK packets processed by the RURL filter.ro Counter .1.3.6.1.4.1.641.6.4.18.2.23 |
rurlInfoStatClientDataInTotal number of client PSH packets processed by the RURL filter.ro Counter .1.3.6.1.4.1.641.6.4.18.2.24 |
rurlInfoStatClientDataRetxTotal number of client data retransmit packets processed by
the RURL filter.ro Counter .1.3.6.1.4.1.641.6.4.18.2.25 |
rurlInfoStatServerSYNsSentTotal number of SYN packets sent to the server by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.26 |
rurlInfoStatServerSYNACKsInTotal number of swtich-to-server SYN/ACK packets processed by
the RURL filter.ro Counter .1.3.6.1.4.1.641.6.4.18.2.27 |
rurlInfoStatServerACKsSentTotal number of ACK packets sent to the server by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.28 |
rurlInfoStatServerACKsInTotal number of server-to-switch ACK packets processed by the
RURL filters.ro Counter .1.3.6.1.4.1.641.6.4.18.2.29 |
rurlInfoStatServerSYNsRetxTotal number of retransmitted SYN packets sent to the server by
the switch that resulted in an error.ro Counter .1.3.6.1.4.1.641.6.4.18.2.30 |
rurlInfoStatServerSYNsRetxErrorsTotal number of ACK packets sent to the server by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.31 |
rurlInfoStatL7SessionReuseTotal number of SYN requests that matched a session lookup due
to an accidental reuse of a session table entry. This is typically
a result of port wrap/reuse on a client generally running
performance testing.ro Counter .1.3.6.1.4.1.641.6.4.18.2.32 |
rurlInfoStatConnSplicedTotal number of connections successfully spliced by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.2.33 |
rurlMaintStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.18.3 |
rurlMaintStatOrgServerHitsTotal number of session setups to the end server.ro Counter .1.3.6.1.4.1.641.6.4.18.3.1 |
rurlMaintStatHTTPRedirsTotal number of HTTP redirect responses to the client.ro Counter .1.3.6.1.4.1.641.6.4.18.3.2 |
rurlMaintStatServerReqsTotal number of request packets sent from the switch to the iSD.ro Counter .1.3.6.1.4.1.641.6.4.18.3.3 |
rurlMaintStatServerAcksTotal number of response packets sent from the iSD to the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.3.4 |
rurlMaintStatSessCntTotal number of session connections to the iSD made by the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.3.5 |
rurlMaintStatLastFrameCntTotal number of 'last frame' packets sent from the iSD to the switch.ro Counter .1.3.6.1.4.1.641.6.4.18.3.6 |
rurlMaintStatConnectRxmitTotal number of client retransmissions encountered.ro Counter .1.3.6.1.4.1.641.6.4.18.3.7 |
rurlMaintStatResetRxmitTotal number of client resets due to excessive retransmissions.ro Counter .1.3.6.1.4.1.641.6.4.18.3.8 |
rurlMaintStatCurRdirIPEntriesCurrent IP redirection table entries.ro Gauge .1.3.6.1.4.1.641.6.4.18.3.9 |
rurlMaintStatHighRdirIPEntriesHighest IP redirection table entries.ro Counter .1.3.6.1.4.1.641.6.4.18.3.10 |
rurlMaintStatCurRdirPORTEntriesCurrent PORT redirection table entries.ro Gauge .1.3.6.1.4.1.641.6.4.18.3.11 |
rurlMaintStatHighRdirPORTEntriesHighest PORT redirection table entries.ro Counter .1.3.6.1.4.1.641.6.4.18.3.12 |
rurlMaintStatCurRdirIPPORTEntriesCurrent IP/PORT redirection table entries.ro Gauge .1.3.6.1.4.1.641.6.4.18.3.13 |
rurlMaintStatHighRdirIPPORTEntriesHighest IP/PORT redirection table entries.ro Counter .1.3.6.1.4.1.641.6.4.18.3.14 |
rurlMaintStatCurRSEQBufEntriesCurrent RURL sequence table entries.ro Gauge .1.3.6.1.4.1.641.6.4.18.3.15 |
rurlMaintStatHighRSEQBufEntriesHighest RURL sequence table entries.ro Counter .1.3.6.1.4.1.641.6.4.18.3.16 |
rurlMaintStatCurRBUFBufEntriesCurrent RURL frame buffer entries.ro Gauge .1.3.6.1.4.1.641.6.4.18.3.17 |
rurlMaintStatHighRBUFBufEntriesHighest RURL frame buffer entries.ro Counter .1.3.6.1.4.1.641.6.4.18.3.18 |
rurlMaintStatRSEQBufAllocsTotal number of successful RURL sequence buffer Allocs.ro Counter .1.3.6.1.4.1.641.6.4.18.3.19 |
rurlMaintStatRSEQBufFreesTotal number of successful RURL sequence buffer Frees.ro Counter .1.3.6.1.4.1.641.6.4.18.3.20 |
rurlMaintStatRSEQFailBufAllocsTotal number of failed RURL sequence buffer Allocs.ro Counter .1.3.6.1.4.1.641.6.4.18.3.21 |
rurlMaintStatRSEQFailBufFreesTotal number of failed RURL sequence buffer Frees.ro Counter .1.3.6.1.4.1.641.6.4.18.3.22 |
rurlMaintStatRBUFBufAllocsTotal number of successful RURL frame buffer Allocs.ro Counter .1.3.6.1.4.1.641.6.4.18.3.23 |
rurlMaintStatRBUFBufFreesTotal number of successful RURL frame buffer Frees.ro Counter .1.3.6.1.4.1.641.6.4.18.3.24 |
rurlMaintStatRBUFFailBufAllocsTotal number of failed RURL frame buffer Allocs.ro Counter .1.3.6.1.4.1.641.6.4.18.3.25 |
rurlMaintStatRBUFFailBufFreesTotal number of failed RURL frame buffer Frees.ro Counter .1.3.6.1.4.1.641.6.4.18.3.26 |
rurlMaintStatRBUFRetransmitTotal number of retransmissions of an existing RURL frame buffer.ro Counter .1.3.6.1.4.1.641.6.4.18.3.27 |
rurlMaintStatRBUFChangedTotal number of retransmissions of an existing RURL frame buffer
that has changed in length.ro Counter .1.3.6.1.4.1.641.6.4.18.3.28 |
rtspStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.19 |
rtspStatControlConnsTotal number of active RTSP control connections.ro Gauge .1.3.6.1.4.1.641.6.4.19.1 |
rtspStatUDPStreamsTotal number of active UDP streams.ro Gauge .1.3.6.1.4.1.641.6.4.19.2 |
rtspStatRedirectsTotal number of switch redirects.ro Counter .1.3.6.1.4.1.641.6.4.19.3 |
rtspStatConnDeniedTotal connections denied due to RTSP connection limit.ro Counter .1.3.6.1.4.1.641.6.4.19.4 |
rtspStatAllocFailsTotal cases of heap memory allocation failures.ro Counter .1.3.6.1.4.1.641.6.4.19.5 |
tcpLimitStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.23 |
tcpLimitStatHoldDownsTotal number of client hold downs triggered.ro Counter .1.3.6.1.4.1.641.6.4.23.1 |
tcpLimitStatClientEntriesCurrent number of TCP rate limiting per-client state entries.ro Gauge .1.3.6.1.4.1.641.6.4.23.2 |
nasaStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.24 |
nasaStatSpTableThe table of NASA statistics at SP. SEQUENCE OF NasaStatSpEntry .1.3.6.1.4.1.641.6.4.24.1 |
nasaStatSpEntryA row in the NASA base port statistcs table. NasaStatSpEntry .1.3.6.1.4.1.641.6.4.24.1.1 |
nasaStatSpPortIndexThe port number for which the statistics apply.ro INTEGER .1.3.6.1.4.1.641.6.4.24.1.1.1 |
nasaStatSpCtlTunnelInThe number of packet in for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.2 |
nasaStatSpCtlTunnelInvalidPktThe number of invalid packet in for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.3 |
nasaStatSpReqSessCntThe number of session request message in for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.4 |
nasaStatSpSessAddCntThe number of session add mesage for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.5 |
nasaStatSpSessDelCntThe number of session delete message for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.6 |
nasaStatSpSessUpdCntThe number of session update message for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.7 |
nasaStatSpSessRdCntThe number of session read message for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.8 |
nasaStatSpSessCharCntThe number of session characteristics message for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.9 |
nasaStatSpReqSessNoIsdThe number of session request message no isd for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.10 |
nasaStatSpCtlTunnelToMpThe number of packet sent to MP for control tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.11 |
nasaStatSpBcastTunnelCntThe number of packet in for broadcast tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.12 |
nasaStatSpBcastTunnelToMpThe number of packet sent to MP for broadcast tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.13 |
nasaStatSpBcastTunnelToIsdThe number of packet sent to ISD for broadcast tunnel on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.14 |
nasaStatSpRurlTunnelCntThe number of RURL tunnel count on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.15 |
nasaStatSpIpDatagramCntThe number of IP datagram tunnel count on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.16 |
nasaStatSpCliRedirectCntThe number of client redirect tunnel count on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.17 |
nasaStatSpInvalidVersionThe number of invalid NA/SA version packet in on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.18 |
nasaStatSpAckTxThe number of ack packet sent at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.19 |
nasaStatSpAckRxThe number of ack packet received at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.20 |
nasaStatSpAckAllocThe number of ack packet allocated at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.21 |
nasaStatSpAckFreeThe number of ack packet freed at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.22 |
nasaStatSpAllocAckFailThe number of allocated ack packet failed at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.23 |
nasaStatSpAllocFrmFailThe number of allocated data packet failed at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.24 |
nasaStatSpRexmitFailThe number of re-transmit failed at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.25 |
nasaStatSpInvalidIsdThe number of packet form unknown ISD at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.26 |
nasaStatSpInvalidPktsThe number of invalid packet at link level on the port.ro Counter .1.3.6.1.4.1.641.6.4.24.1.1.27 |
nasaMpStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.24.2 |
nasaStatMpTotalRxThe number of messages received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.1 |
nasaStatMpTotalTxThe number of messages transmitted on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.2 |
nasaStatMpBadCksumThe number of messages received with bad checksum on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.3 |
nasaStatMpInvalidRxThe number of invalid messages received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.4 |
nasaStatMpPingRequestsThe number of broadcast pings received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.5 |
nasaStatMpPingResponsesThe number broadcast ping responses transmitted on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.6 |
nasaStatMpRegRequestsThe number registration requests received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.7 |
nasaStatMpCapResponsesThe number of capability responses transmitted on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.8 |
nasaStatMpRegConfirmationsThe number of registration confirmations received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.9 |
nasaStatMpUnregRequestsThe number of unregistration requests received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.10 |
nasaStatMpHealthRequestsThe number of heartbeat requests transmitted on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.11 |
nasaStatMpHealthResponsesThe number of heartbeat responses received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.12 |
nasaStatMpCmdRequestsThe number NASA CLI cmd requests received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.13 |
nasaStatMpCmdResponsesThe number NASA CLI cmd responses received on MP side.ro Counter .1.3.6.1.4.1.641.6.4.24.2.14 |
dnsSlbStats OBJECT IDENTIFIER .1.3.6.1.4.1.641.6.4.25 |
dnsSlbStatTCPQueriesTotal number of TCP DNS queries.ro Counter .1.3.6.1.4.1.641.6.4.25.1 |
dnsSlbStatUDPQueriesTotal number of UDP DNS queries.ro Counter .1.3.6.1.4.1.641.6.4.25.2 |
dnsSlbStatInvalidQueriesTotal number of invalid DNS queries.ro Counter .1.3.6.1.4.1.641.6.4.25.3 |
dnsSlbStatMultipleQueriesTotal number of multiple DNS queries.ro Counter .1.3.6.1.4.1.641.6.4.25.4 |
dnsSlbStatDnameParseErrorsTotal number of domain name parse errors.ro Counter .1.3.6.1.4.1.641.6.4.25.5 |
dnsSlbStatFailedMatchesTotal number of failed real server name matches.ro Counter .1.3.6.1.4.1.641.6.4.25.6 |
dnsSlbStatInternalErrorsTotal number of DNS parsing internal errors.ro Counter .1.3.6.1.4.1.641.6.4.25.7 |
slb-info OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.1.9.2 |
slbFailOverInfoTableThe table of switch fail-over run-time status. SEQUENCE OF SlbFailOverInfoEntry .1.3.6.1.4.1.1872.2.1.9.2.1 |
slbFailOverInfoEntryA row in the switch fail-over information table. SlbFailOverInfoEntry .1.3.6.1.4.1.1872.2.1.9.2.1.1 |
slbFailOverInfoIndexThe index of switch fail-over information table.ro INTEGER .1.3.6.1.4.1.1872.2.1.9.2.1.1.1 |
slbFailOverInfoPrimaryIpIP address of the primary switch.ro IpAddress .1.3.6.1.4.1.1872.2.1.9.2.1.1.2 |
slbFailOverInfoPrimaryStatusThe current operational status of the primary switch.ro Enumeration .1.3.6.1.4.1.1872.2.1.9.2.1.1.3 |
slbFailOverInfoPrimaryStateThe current operational state of the primary switch.ro Enumeration .1.3.6.1.4.1.1872.2.1.9.2.1.1.4 |
slbFailOverInfoSecondaryIpIP address of the secondary switch.ro IpAddress .1.3.6.1.4.1.1872.2.1.9.2.1.1.5 |
slbFailOverInfoSecondaryStatusThe current operational status of the secondary switch.ro Enumeration .1.3.6.1.4.1.1872.2.1.9.2.1.1.6 |
slbFailOverInfoSecondaryStateThe current operational state of the secondary switch.ro Enumeration .1.3.6.1.4.1.1872.2.1.9.2.1.1.7 |
slbRealServerInfoTableThe table of real server run-time information. SEQUENCE OF SlbRealServerInfoEntry .1.3.6.1.4.1.1872.2.1.9.2.2 |
slbRealServerInfoEntryA row in the real server information table. SlbRealServerInfoEntry .1.3.6.1.4.1.1872.2.1.9.2.2.1 |
slbRealServerInfoIndexThe real server indexro INTEGER .1.3.6.1.4.1.1872.2.1.9.2.2.1.1 |
slbRealServerInfoIpAddrIP address of the real server.ro IpAddress .1.3.6.1.4.1.1872.2.1.9.2.2.1.2 |
slbRealServerMacAddrThe MAC address of the real server.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1872.2.1.9.2.2.1.3 |
slbRealServerInfoSwitchPortThe switch port that the real server is connected to.ro INTEGER .1.3.6.1.4.1.1872.2.1.9.2.2.1.4 |
slbRealServerInfoHealthLayerThe OSI layer at whitch real server functionality is verified.ro Enumeration .1.3.6.1.4.1.1872.2.1.9.2.2.1.5 |
slbRealServerInfoOverflowThe overflow state of the real server.ro Enumeration .1.3.6.1.4.1.1872.2.1.9.2.2.1.6 |
slbRealServerInfoStateThe state of the real server.ro Enumeration .1.3.6.1.4.1.1872.2.1.9.2.2.1.7 |
nasaIsdInfoTableThe table of NASA ISD run-time information. SEQUENCE OF NasaIsdInfoEntry .1.3.6.1.4.1.1872.2.1.9.2.3 |
nasaIsdInfoEntryA row in the real server information table. NasaIsdInfoEntry .1.3.6.1.4.1.1872.2.1.9.2.3.1 |
nasaIsdInfoIndexThe ISD indexro INTEGER .1.3.6.1.4.1.1872.2.1.9.2.3.1.1 |
nasaIsdInfoIpAddrIP address of the ISD.ro IpAddress .1.3.6.1.4.1.1872.2.1.9.2.3.1.2 |
nasaIsdMacAddrThe MAC address of the ISD.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1872.2.1.9.2.3.1.3 |
nasaIsdInfoSwitchPortThe switch port that the ISD is connected to.ro INTEGER .1.3.6.1.4.1.1872.2.1.9.2.3.1.4 |
nasaIsdInfoGdiVLAN ID of the ISD.ro INTEGER .1.3.6.1.4.1.1872.2.1.9.2.3.1.5 |
nasaIsdInfoStateThe current state of the ISD.ro Enumeration .1.3.6.1.4.1.1872.2.1.9.2.3.1.6 |
nasaIsdInfoStateChangeThe number of ISD state transitions from up to down.ro INTEGER .1.3.6.1.4.1.1872.2.1.9.2.3.1.7 |
operSlbPortTableThe table of ports that the Oper commands apply to. SEQUENCE OF OperSlbPortEntry .1.3.6.1.4.1.1872.2.1.14.1 |
operSlbPortEntryA row in the operSlbPortTable OperSlbPortEntry .1.3.6.1.4.1.1872.2.1.14.1.1 |
operSlbPortIndexThe switch port number.ro INTEGER .1.3.6.1.4.1.1872.2.1.14.1.1.1 |
operSlbPortClrSessionTabThis an action object to clear session buinding table for the
specified port. ok(1) is returned when read.rw Enumeration .1.3.6.1.4.1.1872.2.1.14.1.1.2 |
slbOper OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.1.14.4 |
slbOperRealServerTableThe table of real servers. SEQUENCE OF SlbOperRealServerEntry .1.3.6.1.4.1.1872.2.1.14.4.1 |
slbOperRealServerEntryA row in the slbOperRealServerTable SlbOperRealServerEntry .1.3.6.1.4.1.1872.2.1.14.4.1.1 |
slbOperRealServerIndexThe index for the real server.ro INTEGER .1.3.6.1.4.1.1872.2.1.14.4.1.1.1 |
slbOperRealServerStatusThis an action object which is used to temporarily enable/disable a
real server. The real server will be returned to its configured
operational mode when the switch is reset. Setting the value to
'cookiepersistant' allows cookie persistent HTTP 1.0 sessions
when the real server is offline.rw Enumeration .1.3.6.1.4.1.1872.2.1.14.4.1.1.2 |
slbOperConfigSyncWhen set to a value of 'sync(2)' it synchronizes the SLB, filter
and VRRP configuration on a peer switch. To take effect, peers must
be configured on the switches and the administrator password on the
switches must be identical.
'ok(1)' is returned when the object os read.rw Enumeration .1.3.6.1.4.1.1872.2.1.14.4.2 |
serverloadbalance OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5 |
RFC1155-SMI Unknown .1.3.6.1.4.1.33555.4.4.5 |
slbRealServerMaxSizeThe maximum number of entries in SLB RealServerTable.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.1 |
slbCurCfgRealServerTableThe table of Real Server configuration in the current_config. SEQUENCE OF SlbCurCfgRealServerEntry .1.3.6.1.4.1.33555.4.4.5.2 |
slbCurCfgRealServerEntryInformation about a particular Real Server configuration. SlbCurCfgRealServerEntry .1.3.6.1.4.1.33555.4.4.5.2.1 |
slbCurCfgRealServerIndexThe real server numberro INTEGER .1.3.6.1.4.1.33555.4.4.5.2.1.1 |
slbCurCfgRealServerIpAddrIP address of the real server identified by the instance of the
slbRealServerIndex.ro IpAddress .1.3.6.1.4.1.33555.4.4.5.2.1.2 |
slbCurCfgRealServerWeightThe server weight.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.2.1.3 |
slbCurCfgRealServerMaxConnsThe maximum number of connections that are allowed.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.2.1.4 |
slbCurCfgRealServerTimeOutThe maximum number of minutes an inactive connection remains open.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.2.1.5 |
slbCurCfgRealServerBackUpThe backup server number for this server.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.2.1.6 |
slbCurCfgRealServerPingIntervalThe interval between keep-alive (ping) attempts in number of seconds.
Zero means disabling ping attempt.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.2.1.7 |
slbCurCfgRealServerFailRetryThe number of failed attempts to declare this server DOWN.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.2.1.8 |
slbCurCfgRealServerSuccRetryThe number of successful attempts to declare a server UP.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.2.1.9 |
slbCurCfgRealServerStateEnable or disable this server.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.2.1.10 |
slbCurCfgRealServerTypeThe server type. It participates in global server
load balancing when it is configured as remote-server.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.2.1.11 |
slbCurCfgRealServerNameThe name of the real server.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.2.1.12 |
slbCurCfgRealServerUrlBmapThe URL Pathes selected for URL load balancing for by the real
server. The selected URL Pathes are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ URL Path 9
|| ||
|| ||___ URL Path 8
|| |____ URL Path 7
|| . . .
||_________ URL Path 2
|__________ URL Path 1
where x : 1 - The represented URL Path is selected
0 - The represented URL Path is not selectedro OCTET STRING .1.3.6.1.4.1.33555.4.4.5.2.1.13 |
slbCurCfgRealServerCookieThe real server that will handle client requests that doesn't
contain an URL cookie if Cookie loadbalance is enabled.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.2.1.14 |
slbCurCfgRealServerExcludeStrThe real server will handle requests that don't match the
loadbalance string if it is enabled.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.2.1.15 |
slbCurCfgRealServerSubmacThe real server config to enable/disable MAC SA substitution for
L4 traffic. If disabled (the default) we will NOT substitute the
MAC SA of client-to-server frames. If enabled, we will substitute
the MAC SA.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.2.1.16 |
slbCurCfgRealServerProxyThe real server config to enable/disable client proxy operation.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.2.1.17 |
slbNewCfgRealServerTableThe table of Real Server configuration in the new_config. SEQUENCE OF SlbNewCfgRealServerEntry .1.3.6.1.4.1.33555.4.4.5.3 |
slbNewCfgRealServerEntryInformation about a particular Real Server configuration. SlbNewCfgRealServerEntry .1.3.6.1.4.1.33555.4.4.5.3.1 |
slbNewCfgRealServerIndexThe real server numberro INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.1 |
slbNewCfgRealServerIpAddrIP address of the real server identified by the instance of
slbRealServerIndex.rw IpAddress .1.3.6.1.4.1.33555.4.4.5.3.1.2 |
slbNewCfgRealServerWeightThe server weight.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.3 |
slbNewCfgRealServerMaxConnsThe maximum number of connections that are allowed.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.4 |
slbNewCfgRealServerTimeOutThe maximum number of minutes an inactive connection remains open.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.5 |
slbNewCfgRealServerBackUpThe backup server number for this server.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.6 |
slbNewCfgRealServerPingIntervalThe interval between keep-alive (ping) attempts in number of
seconds. Zero means disabling ping attempt.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.7 |
slbNewCfgRealServerFailRetryThe number of failed attempts to declare this server DOWN.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.8 |
slbNewCfgRealServerSuccRetryThe number of successful attempts to declare a server UP.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.9 |
slbNewCfgRealServerStateEnable or disable this server.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.3.1.10 |
slbNewCfgRealServerDeleteBy setting the value to delete(2), the entire row is deleted.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.3.1.11 |
slbNewCfgRealServerTypeThe server type. It participates in global server load balancing
when it is configured as remote-server.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.3.1.12 |
slbNewCfgRealServerNameThe name of the real server.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.3.1.13 |
slbNewCfgRealServerUrlBmapThe URL Pathes selected for URL load balancing for by the
real server. The selected URL Pathes are presented in
a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ URL Path 9
|| ||
|| ||___ URL Path 8
|| |____ URL Path 7
|| . . .
||_________ URL Path 2
|__________ URL Path 1
where x : 1 - The represented URL Path is selected
0 - The represented URL Path is not selectedro OCTET STRING .1.3.6.1.4.1.33555.4.4.5.3.1.14 |
slbNewCfgRealServerAddUrlThe URL Path (slbCurCfgUrlLbPathIndex) to be added to the
real server. A zero is returned when read.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.15 |
slbNewCfgRealServerRemUrlThe URL Path (slbCurCfgUrlLbPathIndex) to be removed from
the real server. A zero is returned when read.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.3.1.16 |
slbNewCfgRealServerCookieEnable or disable real server to handle client requests
that don't contain a cookie if cookie loadbalance is enabled.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.3.1.17 |
slbNewCfgRealServerExcludeStrEnable or disable exclusionary matching string on real server.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.3.1.18 |
slbNewCfgRealServerSubmacThe real server config to enable/disable MAC SA substitution for
L4 traffic. If disabled (the default) we will NOT substitute the
MAC SA of client-to-server frames. If enabled, we will substitute
the MAC SA.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.3.1.19 |
slbNewCfgRealServerProxyThe real server config to enable/disable client proxy operation.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.3.1.20 |
slbVirtServerTableMaxSizeThe maximum number of entries in SLB VirtServerTable.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.4 |
slbCurCfgVirtServerTableThe table of virtual Servers. SEQUENCE OF SlbCurCfgVirtualServerEntry .1.3.6.1.4.1.33555.4.4.5.5 |
slbCurCfgVirtualServerEntryA row in the virtual server table. SlbCurCfgVirtualServerEntry .1.3.6.1.4.1.33555.4.4.5.5.1 |
slbCurCfgVirtServerIndexVirtual Server Numberro INTEGER .1.3.6.1.4.1.33555.4.4.5.5.1.1 |
slbCurCfgVirtServerIpAddressIP address of the virtual server.ro IpAddress .1.3.6.1.4.1.33555.4.4.5.5.1.2 |
slbCurCfgVirtServerLayer3OnlyEnable or disable layer3 only balancing.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.5.1.3 |
slbCurCfgVirtServerStateEnable or disable the virtual server.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.5.1.4 |
slbCurCfgVirtServerDnameThe domain name of the virtual server.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.5.1.5 |
slbCurCfgVirtServerCnameThe cookie name of the virtual server used for cookie load balance.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.5.1.6 |
slbCurCfgVirtServerCoffsetThe starting byte offset of the cookie value.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.5.1.7 |
slbCurCfgVirtServerClengthThe number of bytes to extract from the cookie value.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.5.1.8 |
slbCurCfgVirtServerUriCookieEnable or disable cookie search in URIro Enumeration .1.3.6.1.4.1.33555.4.4.5.5.1.9 |
slbCurCfgVirtServerFtpParsingEnable or Disable the ftp parsing for the virtual server.roobsolete Enumeration .1.3.6.1.4.1.33555.4.4.5.5.1.10 |
slbCurCfgVirtServerUrlHashLenThe number of bytes used to hash onto server. A zero means
URL hashing disabled.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.5.1.11 |
slbCurCfgVirtServerHttpHdrNameThe HTTP header name of the virtual server.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.5.1.12 |
slbCurCfgVirtServerBwmContractThe default BW contract of virtual server.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.5.1.13 |
slbCurCfgVirtServerResponseCountThe number of cookie search response count.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.5.1.14 |
slbCurCfgVirtServerCExpireThe cookie expire of the virtual server used for insert cookie load
balance depending on the mode it has the following format
<MM/dd/yy[@hh:mm]> absolute mode or <days[:hours[:minutes]]>
for relative mode.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.5.1.15 |
slbNewCfgVirtServerTableThe table of virtual Servers. SEQUENCE OF SlbNewCfgVirtualServerEntry .1.3.6.1.4.1.33555.4.4.5.6 |
slbNewCfgVirtualServerEntryA row in the virtual server table. SlbNewCfgVirtualServerEntry .1.3.6.1.4.1.33555.4.4.5.6.1 |
slbNewCfgVirtServerIndexThe Virtual Server Numberro INTEGER .1.3.6.1.4.1.33555.4.4.5.6.1.1 |
slbNewCfgVirtServerIpAddressIP address of the virtual server.rw IpAddress .1.3.6.1.4.1.33555.4.4.5.6.1.2 |
slbNewCfgVirtServerLayer3OnlyEnable or disable layer3 only balancing.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.6.1.3 |
slbNewCfgVirtServerStateEnable or disable the virtual server.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.6.1.4 |
slbNewCfgVirtServerDeleteBy setting the value to delete(2), the entire row is deleted.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.6.1.5 |
slbNewCfgVirtServerDnameThe domain name of the virtual server.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.6.1.6 |
slbNewCfgVirtServerCnameThe cookie name of the virtual server used for cookie load balance.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.6.1.7 |
slbNewCfgVirtServerCoffsetThe starting byte offset of the cookie value.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.6.1.8 |
slbNewCfgVirtServerClengthThe number of bytes to extract from the cookie value.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.6.1.9 |
slbNewCfgVirtServerUriCookieEnable or disable cookie search in URIrw Enumeration .1.3.6.1.4.1.33555.4.4.5.6.1.10 |
slbNewCfgVirtServerFtpParsingEnable or Disable the ftp parsing for the virtual server.rwobsolete Enumeration .1.3.6.1.4.1.33555.4.4.5.6.1.11 |
slbNewCfgVirtServerUrlHashLenThe number of bytes used to hash onto server, A zero means
URL hashing disabled.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.6.1.12 |
slbNewCfgVirtServerHttpHdrNameThe HTTP header name of the virtual server.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.6.1.13 |
slbNewCfgVirtServerBwmContractThe default BW contract number of the virtual server.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.6.1.14 |
slbNewCfgVirtServerResponseCountThe number of cookie search response count.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.6.1.15 |
slbNewCfgVirtServerCExpireThe cookie expire of the virtual server used for insert cookie load
balance depending on the mode it has the following format
<MM/dd/yy[@hh:mm]> absolute mode or <days[:hours[:minutes]]>
for relative mode.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.6.1.16 |
slbCurCfgVirtServicesTableThe table of virtual services. SEQUENCE OF SlbCurCfgVirtServicesEntry .1.3.6.1.4.1.33555.4.4.5.7 |
slbCurCfgVirtServicesEntryA row in the virtual services table. SlbCurCfgVirtServicesEntry .1.3.6.1.4.1.33555.4.4.5.7.1 |
slbCurCfgVirtServIndexThe number of the virtual server.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.7.1.1 |
slbCurCfgVirtServiceIndexThe service index. This has no external meaningro INTEGER .1.3.6.1.4.1.33555.4.4.5.7.1.2 |
slbCurCfgVirtServiceVirtPortThe layer4 virtual port number of the service.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.7.1.3 |
slbCurCfgVirtServiceRealGroupThe real server group number for this service.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.7.1.4 |
slbCurCfgVirtServiceRealPortThe layer4 real port number of the service.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.7.1.5 |
slbCurCfgVirtServiceUDPBalanceEnable, disable or stateless the UDP balancing for the virtual port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.6 |
slbCurCfgVirtServicePBindEnable or disable persistent bindings for the virtual port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.7 |
slbCurCfgVirtServiceHnameThe host name of the virtual service.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.7.1.8 |
slbCurCfgVirtServiceHttpSlbSelect HTTP server loadbalancing for the virtual port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.9 |
slbCurCfgVirtServiceBwmContractThe BWM contract number for this service.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.7.1.10 |
slbCurCfgVirtServiceDirServerRtnEnable or disable direct server return feature. To translate only
MAC addresses in performing server load balancing when enabled.
This allow servers to return directly to client since IP addresses
have not been changed.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.11 |
slbCurCfgVirtServiceRtspUrlParseEnable or disable RTSP URL hashing.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.12 |
slbCurCfgVirtServiceCookieModeSelect cookie persistance mode.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.13 |
slbCurCfgVirtServiceDBindEnable or disable Delayed Binding.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.14 |
slbCurCfgVirtServiceFtpParsingEnable or Disable the ftp parsing for the virtual service.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.15 |
slbCurCfgVirtServiceHttpSlbOptionSelect HTTP server loadbalancing option for the virtual port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.16 |
slbCurCfgVirtServiceHttpSlb2Select HTTP server loadbalancing for the virtual port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.17 |
slbCurCfgVirtServiceRemapUDPFragsEnable or disable remapping UDP server fragmentsro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.18 |
slbCurCfgVirtServiceDnsSlbEnable or disable DNS query load balancing.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.7.1.19 |
slbNewCfgVirtServicesTableThe table of virtual Services. SEQUENCE OF SlbNewCfgVirtServicesEntry .1.3.6.1.4.1.33555.4.4.5.8 |
slbNewCfgVirtServicesEntryA row in the virtual services table. SlbNewCfgVirtServicesEntry .1.3.6.1.4.1.33555.4.4.5.8.1 |
slbNewCfgVirtServIndexThe number of the virtual server.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.8.1.1 |
slbNewCfgVirtServiceIndexThe service index. This has no external meaningro INTEGER .1.3.6.1.4.1.33555.4.4.5.8.1.2 |
slbNewCfgVirtServiceVirtPortThe layer4 virtual port number of the service.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.8.1.3 |
slbNewCfgVirtServiceRealGroupThe real server group number for this service.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.8.1.4 |
slbNewCfgVirtServiceRealPortThe layer4 real port number of the service.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.8.1.5 |
slbNewCfgVirtServiceUDPBalanceEnable, disable or stateless the UDP balancing for the virtual port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.6 |
slbNewCfgVirtServicePBindEnable or disable persistent bindings for the virtual port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.7 |
slbNewCfgVirtServiceHnameThe host name of the virtual service.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.8.1.8 |
slbNewCfgVirtServiceHttpSlbSelect HTTP server loadbalancing for the virtual port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.9 |
slbNewCfgVirtServiceBwmContractThe BWM contract number for this service.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.8.1.10 |
slbNewCfgVirtServiceDirServerRtnEnable or disable direct server return feature. To translate only
MAC addresses in performing server load balancing when enabled.
This allow servers to return directly to client since IP addresses
have not been changed.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.11 |
slbNewCfgVirtServiceDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.12 |
slbNewCfgVirtServiceRtspUrlParseEnable or disable RTSP URL hashing.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.13 |
slbNewCfgVirtServiceCookieModeSelect cookie persistance mode.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.14 |
slbNewCfgVirtServiceDBindEnable or disable Delayed Binding.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.15 |
slbNewCfgVirtServiceFtpParsingEnable or Disable the ftp parsing for the virtual service.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.16 |
slbNewCfgVirtServiceHttpSlbOptionSelect HTTP server loadbalancing for the virtual port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.17 |
slbNewCfgVirtServiceHttpSlb2Select HTTP server loadbalancing for the virtual port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.18 |
slbNewCfgVirtServiceRemapUDPFragsEnable or disable remapping UDP server fragmentsrw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.19 |
slbNewCfgVirtServiceDnsSlbEnable or disable DNS query load balancing.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.8.1.20 |
slbGroupTableMaxSizeThe maximum number of entries in slbCurCfgGroupTable.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.9 |
slbCurCfgGroupTableThe table of groups SEQUENCE OF SlbCurCfgGroupEntry .1.3.6.1.4.1.33555.4.4.5.10 |
slbCurCfgGroupEntryA row in the slbCurCfgGroupTable SlbCurCfgGroupEntry .1.3.6.1.4.1.33555.4.4.5.10.1 |
slbCurCfgGroupIndexThe group number for which the information pertains.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.10.1.1 |
slbCurCfgGroupRealServersThe Real servers in the group. The servers are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| || |_ server 9
| ||
| ||___ server 8
| |____ server 7
| . . .
|__________ server 1
where x : 1 - The represented server belongs to the group
0 - The represented server does not belong to the groupro OCTET STRING .1.3.6.1.4.1.33555.4.4.5.10.1.2 |
slbCurCfgGroupMetricThe metric used to select next server in group.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.10.1.3 |
slbCurCfgGroupBackupServerThe backup real server for this group.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.10.1.4 |
slbCurCfgGroupHealthCheckUrlThe specific content which is examined during health checks.
The content depends on the type of health check.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.10.1.5 |
slbCurCfgGroupHealthCheckLayerThe OSI layer at which servers are health checked.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.10.1.6 |
slbCurCfgGroupNameThe name of the real server group.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.10.1.7 |
slbCurCfgGroupRealThresholdThe server failure syslog threshold of the real server group.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.10.1.8 |
slbCurCfgGroupBackupGroupThe backup real server group for this group.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.10.1.9 |
slbCurCfgGroupVipHealthCheckEnable or disable VIP health checking in DSR mode.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.10.1.10 |
slbNewCfgGroupTableThe table of groups SEQUENCE OF SlbNewCfgGroupEntry .1.3.6.1.4.1.33555.4.4.5.11 |
slbNewCfgGroupEntryA row in the slbNewCfgGroupTable SlbNewCfgGroupEntry .1.3.6.1.4.1.33555.4.4.5.11.1 |
slbNewCfgGroupIndexThe group number for which the information pertains.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.11.1.1 |
slbNewCfgGroupRealServersThe Real servers in the group. The servers are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
| || |_ server 9
| ||
| ||___ server 8
| |____ server 7
| . . .
|__________ server 1
where x : 1 - The represented server belongs to the group
0 - The represented server does not belong to the groupro OCTET STRING .1.3.6.1.4.1.33555.4.4.5.11.1.2 |
slbNewCfgGroupAddServerThe real server to be added to the group. When read, 0 is returned.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.11.1.3 |
slbNewCfgGroupRemoveServerThe real server to be removed from the group. When read,
0 is returned.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.11.1.4 |
slbNewCfgGroupMetricThe metric used to select next server in group.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.11.1.5 |
slbNewCfgGroupBackupServerThe backup real server for this group.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.11.1.6 |
slbNewCfgGroupDeleteBy setting the value to delete(2), the entire group is deleted.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.11.1.7 |
slbNewCfgGroupHealthCheckUrlThe specific content which is examined during health checks.
The content depends on the type of health check.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.11.1.8 |
slbNewCfgGroupHealthCheckLayerThe OSI layer at which servers are health checked.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.11.1.9 |
slbNewCfgGroupNameThe name of the real server group.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.11.1.10 |
slbNewCfgGroupRealThresholdThe server failure syslog threshold of the real server group.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.11.1.11 |
slbNewCfgGroupBackupGroupThe backup real server group for this group.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.11.1.12 |
slbNewCfgGroupVipHealthCheckEnable or disable VIP health checking in DSR mode.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.11.1.13 |
slbCurCfgPortTableThe table of ports and their SLB states SEQUENCE OF SlbCurCfgPortEntry .1.3.6.1.4.1.33555.4.4.5.12 |
slbCurCfgPortEntryA row in the slbPortTable SlbCurCfgPortEntry .1.3.6.1.4.1.33555.4.4.5.12.1 |
slbCurCfgPortIndexThe port number for which the SLB information pertains.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.12.1.1 |
slbCurCfgPortProxyIpAddrThe proxy IP address of the interface.ro IpAddress .1.3.6.1.4.1.33555.4.4.5.12.1.2 |
slbCurCfgPortSlbStateThe SLB state of the port.
none(1) - not SLB port
client(2) - SLB client port
server(3) - SLB server port
client-server(4) - SLB client and server portro Enumeration .1.3.6.1.4.1.33555.4.4.5.12.1.3 |
slbCurCfgPortSlbHotStandbyEnable or disable hot standby processing on the switch port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.12.1.4 |
slbCurCfgPortSlbInterSwitchEnable or disable inter-switch processing on the switch port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.12.1.5 |
slbCurCfgPortSlbPipStateEnable or disable use of proxy IP address on the switch port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.12.1.6 |
slbCurCfgPortSlbRtsStateEnable or disable RTS processing on the switch port.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.12.1.7 |
slbCurCfgPortSlbIdslbStateEnable or disable Intrusion Detection server load balancing.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.12.1.8 |
slbCurCfgPortSlbNasaStateEnable or disable NASA base processing.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.12.1.9 |
slbNewCfgPortTableThe table of ports and their SLB states SEQUENCE OF SlbNewCfgPortEntry .1.3.6.1.4.1.33555.4.4.5.13 |
slbNewCfgPortEntryA row in the slbPortTable SlbNewCfgPortEntry .1.3.6.1.4.1.33555.4.4.5.13.1 |
slbNewCfgPortIndexThe port number for which the SLB information pertains.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.13.1.1 |
slbNewCfgPortProxyIpAddrThe proxy IP address of the interface.rw IpAddress .1.3.6.1.4.1.33555.4.4.5.13.1.2 |
slbNewCfgPortSlbStateThe SLB state of the port.
none(1) - not SLB port
client(2) - SLB client port
server(3) - SLB server port
client-server(4) - SLB client and server portrw Enumeration .1.3.6.1.4.1.33555.4.4.5.13.1.3 |
slbNewCfgPortSlbHotStandbyEnable or disable hot standby processing on the switch port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.13.1.4 |
slbNewCfgPortSlbInterSwitchEnable or disable inter-switch processing on the switch port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.13.1.5 |
slbNewCfgPortSlbPipStateEnable or disable use of proxy IP address on the switch port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.13.1.6 |
slbNewCfgPortSlbRtsStateEnable or disable RTS processing on the switch port.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.13.1.7 |
slbNewCfgPortDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.13.1.8 |
slbNewCfgPortSlbIdslbStateEnable or disable Intrusion Detection server load balancing.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.13.1.9 |
slbNewCfgPortSlbNasaStateEnable or disable NASA base processing.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.13.1.10 |
slbCurCfgImaskThe virtual and real IP address mask - corresponding to the
imask command of the slb configuration menu.ro IpAddress .1.3.6.1.4.1.33555.4.4.5.14 |
slbNewCfgImaskThe virtual and real IP address mask - corresponding to the
imask command of the slb configuration menu.rw IpAddress .1.3.6.1.4.1.33555.4.4.5.15 |
slbfailover OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.16 |
slbCurCfgFailOverTableThe table of current switch fail-over configuration.obsolete SEQUENCE OF SlbCurCfgFailOverTblEntry .1.3.6.1.4.1.33555.4.4.5.16.1 |
slbCurCfgFailOverTblEntryA row in the current switch fail-over configuration table.obsolete SlbCurCfgFailOverTblEntry .1.3.6.1.4.1.33555.4.4.5.16.1.1 |
slbCurCfgFailOverIndexThe index of current switch fail-over configuration table.roobsolete INTEGER .1.3.6.1.4.1.33555.4.4.5.16.1.1.1 |
slbCurCfgFailOverPrimaryIpThe IP address of the Primary switch.roobsolete IpAddress .1.3.6.1.4.1.33555.4.4.5.16.1.1.2 |
slbCurCfgFailOverSecondaryIpThe IP address of the Secondary switch.roobsolete IpAddress .1.3.6.1.4.1.33555.4.4.5.16.1.1.3 |
slbCurCfgFailOverSilenceIntervalNumber of seconds before a silent peer is assumed down.roobsolete INTEGER .1.3.6.1.4.1.33555.4.4.5.16.1.1.4 |
slbCurCfgFailOverStateEnable or disable slb switch failover feature.roobsolete Enumeration .1.3.6.1.4.1.33555.4.4.5.16.1.1.5 |
slbCurCfgFailOverRouteSupplyEnable or disable to supply network routes update when switch
is a standby switch.roobsolete Enumeration .1.3.6.1.4.1.33555.4.4.5.16.1.1.6 |
slbNewCfgFailOverTableThe table of new switch fail-over configuration.obsolete SEQUENCE OF SlbNewCfgFailOverTblEntry .1.3.6.1.4.1.33555.4.4.5.16.2 |
slbNewCfgFailOverTblEntryA row in the new switch fail-over configuration table.obsolete SlbNewCfgFailOverTblEntry .1.3.6.1.4.1.33555.4.4.5.16.2.1 |
slbNewCfgFailOverIndexThe index of new switch fail-over configuration table.roobsolete INTEGER .1.3.6.1.4.1.33555.4.4.5.16.2.1.1 |
slbNewCfgFailOverPrimaryIpThe IP address of the Primary switch.rwobsolete IpAddress .1.3.6.1.4.1.33555.4.4.5.16.2.1.2 |
slbNewCfgFailOverSecondaryIpThe IP address of the Secondary switch.rwobsolete IpAddress .1.3.6.1.4.1.33555.4.4.5.16.2.1.3 |
slbNewCfgFailOverSilenceIntervalNumber of seconds before a silent peer is assumed down.rwobsolete INTEGER .1.3.6.1.4.1.33555.4.4.5.16.2.1.4 |
slbNewCfgFailOverStateEnable or disable slb switch failover feature.rwobsolete Enumeration .1.3.6.1.4.1.33555.4.4.5.16.2.1.5 |
slbNewCfgFailOverRouteSupplyEnable or disable to supply network routes update when switch
is a standby switch.roobsolete Enumeration .1.3.6.1.4.1.33555.4.4.5.16.2.1.6 |
slbCurCfgGlobalControlThe global state of Server Load Balancing.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.17 |
slbNewCfgGlobalControlThe global state of Server Load Balancing.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.18 |
slbCurCfgMnetThe management network - corresponding to the mnet command of
the slb configuration menu.ro IpAddress .1.3.6.1.4.1.33555.4.4.5.19 |
slbNewCfgMnetThe management network - corresponding to the mnet command of
the slb configuration menu.rw IpAddress .1.3.6.1.4.1.33555.4.4.5.20 |
slbCurCfgMmaskThe management subnet mask - corresponding to the mmask command
of the slb configuration menu.ro IpAddress .1.3.6.1.4.1.33555.4.4.5.21 |
slbNewCfgMmaskThe management subnet mask - corresponding to the mmask command
of the slb configuration menu.rw IpAddress .1.3.6.1.4.1.33555.4.4.5.22 |
slbCurCfgRadiusAuthenStringThe RADIUS authentication string. The string is used for
generating encrypted authentication string for RADIUS health check.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.23 |
slbNewCfgRadiusAuthenStringThe RADIUS authentication string. The string is used for
generating encrypted authentication string for RADIUS health check.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.24 |
slbCurCfgDirectModeEnable or disable direct access mode. It allows direct access to
real servers and any combination of virtual and real servers
when set to enabled(1).ro Enumeration .1.3.6.1.4.1.33555.4.4.5.25 |
slbNewCfgDirectModeEnable or disable direct access mode. It allows direct access to
real servers and any combination of virtual and real servers
when set to enabled(1).rw Enumeration .1.3.6.1.4.1.33555.4.4.5.26 |
slbUrl OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.27 |
slbUrlRedir OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.27.1 |
slbCurCfgUrlExpTableThe table of URL expressions in the current_config. SEQUENCE OF SlbCurCfgUrlExpTableEntry .1.3.6.1.4.1.33555.4.4.5.27.1.1 |
slbCurCfgUrlExpTableEntryInformation about a expression for URL parsing. SlbCurCfgUrlExpTableEntry .1.3.6.1.4.1.33555.4.4.5.27.1.1.1 |
slbCurCfgUrlExpIndexThe URL expressions table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.1.1.1.1 |
slbCurCfgUrlExpressionThe expressions for URL parsing.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.27.1.1.1.2 |
slbNewCfgUrlExpTableThe table of URL expressions in the new_config. SEQUENCE OF SlbNewCfgUrlExpTableEntry .1.3.6.1.4.1.33555.4.4.5.27.1.2 |
slbNewCfgUrlExpTableEntryInformation about a expression for URL parsing. SlbNewCfgUrlExpTableEntry .1.3.6.1.4.1.33555.4.4.5.27.1.2.1 |
slbNewCfgUrlExpIndexThe URL expressions table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.1.2.1.1 |
slbNewCfgUrlExpressionThe expressions for URL parsing.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.27.1.2.1.2 |
slbNewCfgUrlExpDeleteAction object to delete an URL expression. When set to the value of
2 (delete), the entire row is deleted. When read, other(1) is
returned. Setting the value to anything other than delete(2) has
no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.2.1.3 |
slbCurCfgUrlRedirNonGetOrigSrvThis is for controlling if the switch should redirect packet
to the origin server when HTTP non-GETs are detected.
enabled(1) - Allow redirect traffic to the origin server
disabled(2)- redirect to a group of serversro Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.3 |
slbNewCfgUrlRedirNonGetOrigSrvThis is for controlling if the switch should redirect packet to
the origin server when HTTP non-GETs are detected.
enabled(1) - Allow redirect traffic to the origin server
disabled(2)- redirect to a group of serversrw Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.4 |
slbCurCfgUrlRedirCookieOrigSrvThis is for controlling if the switch should redirect packet to the
origin server when user cookies are detected.
enabled(1) - Allow redirect traffic to the origin server
disabled(2)- redirect to a group of serversro Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.5 |
slbNewCfgUrlRedirCookieOrigSrvThis is for controlling if the switch should redirect packet to the
origin server when user cookies are detected.
enabled(1) - Allow redirect traffic to the origin server
disabled(2)- redirect to a group of serversrw Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.6 |
slbCurCfgUrlRedirNoCacheOrigSrvThis is for controlling if the switch should redirect packet to the
origin server when no-cache header are detected.
enabled(1) - Allow redirect traffic to the origin server
disabled(2)- redirect to a group of serversro Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.7 |
slbNewCfgUrlRedirNoCacheOrigSrvThis is for controlling if the switch should redirect packet to the
origin server when no-cache header are detected.
enabled(1) - Allow redirect traffic to the origin server
disabled(2)- redirect to a group of serversrw Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.8 |
slbCurCfgUrlRedirUriHashLengthSpecify the number of bytes in the URI will be used to hash
onto serverro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.1.9 |
slbNewCfgUrlRedirUriHashLengthSpecify the number of bytes in the URI will be used to hash
onto serverrw INTEGER .1.3.6.1.4.1.33555.4.4.5.27.1.10 |
slbCurCfgUrlRedirHeaderThis is for controlling if the switch should redirect packet to the
cache server based on HTTP header.
enabled(1) - Redirect web traffic based on HTTP header
disabled(2)- Redirect web traffic based on URIro Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.11 |
slbNewCfgUrlRedirHeaderThis is for controlling if the switch should redirect packet to the
cache server based on HTTP header.
enabled(1) - Redirect web traffic based on HTTP header
disabled(2)- Redirect web traffic based on URIrw Enumeration .1.3.6.1.4.1.33555.4.4.5.27.1.12 |
slbCurCfgUrlRedirHeaderNameThe HTTP header namero DisplayString .1.3.6.1.4.1.33555.4.4.5.27.1.13 |
slbNewCfgUrlRedirHeaderNameThe HTTP header namerw DisplayString .1.3.6.1.4.1.33555.4.4.5.27.1.14 |
slbUrlExpTableMaxSizeThe maximum number of entries in SLB Url Expression table.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.1.15 |
slbUrlBalance OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.27.2 |
slbCurCfgUrlLbPathTableThe table of URL path for URL load balancing in the current_config. SEQUENCE OF SlbCurCfgUrlLbPathTableEntry .1.3.6.1.4.1.33555.4.4.5.27.2.1 |
slbCurCfgUrlLbPathTableEntryInformation about an URL path for URL load balancing. SlbCurCfgUrlLbPathTableEntry .1.3.6.1.4.1.33555.4.4.5.27.2.1.1 |
slbCurCfgUrlLbPathIndexThe URL path table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.2.1.1.1 |
slbCurCfgUrlLbPathStringThe URL path for URL load balancing.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.27.2.1.1.2 |
slbCurCfgUrlLbBwmContractThe BW contract for the path.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.2.1.1.3 |
slbNewCfgUrlLbPathTableThe table of URL path for URL load balancing in the new_config. SEQUENCE OF SlbNewCfgUrlLbPathTableEntry .1.3.6.1.4.1.33555.4.4.5.27.2.2 |
slbNewCfgUrlLbPathTableEntryInformation about an URL path for URL load balancing. SlbNewCfgUrlLbPathTableEntry .1.3.6.1.4.1.33555.4.4.5.27.2.2.1 |
slbNewCfgUrlLbPathIndexThe URL path table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.2.2.1.1 |
slbNewCfgUrlLbPathStringThe URL path for URL load balancing.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.27.2.2.1.2 |
slbNewCfgUrlLbPathDeleteAction object to delete an URL Path. When set to the value
of 2 (delete), the entire row is deleted. When read, other(1) is
returned. Setting the value to anything other than delete(2)
has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.27.2.2.1.3 |
slbNewCfgUrlLbBwmContractThe BW contract for the load path.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.27.2.2.1.4 |
slbCurCfgUrlLbErrorMsgCustomize error message to send back to client when switch cannot
bind client's request to servers.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.27.2.3 |
slbNewCfgUrlLbErrorMsgCustomize error message to send back to client when switch cannot
bind client's request to servers.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.27.2.4 |
slbUrlLbPathTableMaxSizeThe maximum number of entries in SLB URL load balance table.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.2.5 |
rtspUrlRedir OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.27.3 |
rtspUrlExpTableMaxSizeThe maximum number of entries in RTSP URL expression table.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.3.1 |
rtspCurCfgUrlExpTableThe table of RTSP URL expressions. SEQUENCE OF RtspCurCfgUrlExpTableEntry .1.3.6.1.4.1.33555.4.4.5.27.3.2 |
rtspCurCfgUrlExpTableEntryInformation about a expression in the RTSP URL Redirection table. RtspCurCfgUrlExpTableEntry .1.3.6.1.4.1.33555.4.4.5.27.3.2.1 |
rtspCurCfgUrlExpIndexThe RTSP URL expression table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.3.2.1.1 |
rtspCurCfgUrlExpressionThe expressions for RTSP URL redirection.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.27.3.2.1.2 |
rtspNewCfgUrlExpTableThe table of RTSP URL expressions. SEQUENCE OF RtspNewCfgUrlExpTableEntry .1.3.6.1.4.1.33555.4.4.5.27.3.3 |
rtspNewCfgUrlExpTableEntryInformation about a expression in the RTSP URL Redirection table. RtspNewCfgUrlExpTableEntry .1.3.6.1.4.1.33555.4.4.5.27.3.3.1 |
rtspNewCfgUrlExpIndexThe RTSP URL expression table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.27.3.3.1.1 |
rtspNewCfgUrlExpressionThe expression for RTSP URL redirection.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.27.3.3.1.2 |
rtspNewCfgUrlExpDeleteAction object to delete an RTSP URL expression. When set to the
value of 2 (delete), the entire row is deleted. When read, other(1)
is returned. Setting the value to anything other than delete(2) has
no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.27.3.3.1.3 |
slbCurCfgPmaskThe persistent mask - corresponding to the pmask command of the
slb configuration menu.ro IpAddress .1.3.6.1.4.1.33555.4.4.5.28 |
slbNewCfgPmaskThe persistent mask - corresponding to the pmask command of the
slb configuration menu.rw IpAddress .1.3.6.1.4.1.33555.4.4.5.29 |
slbCurCfgGraceEnable or disable graceful server failure. It allows to keep the
connection to the failure real servers when set to enabled(1).ro Enumeration .1.3.6.1.4.1.33555.4.4.5.30 |
slbNewCfgGraceEnable or disable graceful server failure. It allows to keep the
connection to the failure real servers when set to enabled(1).rw Enumeration .1.3.6.1.4.1.33555.4.4.5.31 |
slbCurCfgPeerTableThe table of Synch Peer Switch configuration in the current_config. SEQUENCE OF SlbCurCfgPeerEntry .1.3.6.1.4.1.33555.4.4.5.32 |
slbCurCfgPeerEntryInformation about Synch Peer Switch configuration. SlbCurCfgPeerEntry .1.3.6.1.4.1.33555.4.4.5.32.1 |
slbCurCfgPeerIndexThe index for synch peer switchs.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.32.1.1 |
slbCurCfgPeerIpAddrThe IP address of the peer switch.ro IpAddress .1.3.6.1.4.1.33555.4.4.5.32.1.2 |
slbCurCfgPeerStateEnable or disable the peer switch.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.32.1.3 |
slbNewCfgPeerTableThe table of Synch Peer Switch configuration in the new_config. SEQUENCE OF SlbNewCfgPeerEntry .1.3.6.1.4.1.33555.4.4.5.33 |
slbNewCfgPeerEntryInformation about synch peer switch configuration. SlbNewCfgPeerEntry .1.3.6.1.4.1.33555.4.4.5.33.1 |
slbNewCfgPeerIndexThe index number for synch peer switchs.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.33.1.1 |
slbNewCfgPeerIpAddrThe IP address of the peer switch.rw IpAddress .1.3.6.1.4.1.33555.4.4.5.33.1.2 |
slbNewCfgPeerStateEnable or disable the peer switch.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.33.1.3 |
slbNewCfgPeerDeleteBy setting the value to delete(2), the entire row is
deleted.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.33.1.4 |
slbCurCfgSyncFiltEnable or disable synch filter configuration.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.34 |
slbNewCfgSyncFiltEnable or disable synch filter configuration.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.35 |
slbCurCfgSyncPortEnable or disable synch port configuration.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.36 |
slbNewCfgSyncPortEnable or disable synch port configuration.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.37 |
slbCurCfgSyncVrrpEnable or disable synch VRRP Priorities.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.38 |
slbNewCfgSyncVrrpEnable or disable synch VRRP Priorities.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.39 |
slbCurCfgSyncPipEnable or disable synch proxy IP addresses.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.40 |
slbNewCfgSyncPipEnable or disable synch proxy IP addresses.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.41 |
slbCurCfgVirtMatrixArchEnable or disable Virtual Matrix Architecture.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.42 |
slbNewCfgVirtMatrixArchEnable or disable Virtual Matrix Architecture.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.43 |
slbCurCfgSyncSfoEnable or disable synch stateful failover.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.44 |
slbNewCfgSyncSfoEnable or disable synch stateful failover.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.45 |
slbCurCfgSyncSfoUpdatePeriodThe stateful failover update period in seconds.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.46 |
slbNewCfgSyncSfoUpdatePeriodThe stateful failover update period in seconds.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.47 |
slbCurCfgRealServPortTableThe table of real server service ports. SEQUENCE OF SlbCurCfgRealServPortEntry .1.3.6.1.4.1.33555.4.4.5.48 |
slbCurCfgRealServPortEntryA row in the real server service ports table. SlbCurCfgRealServPortEntry .1.3.6.1.4.1.33555.4.4.5.48.1 |
slbCurCfgRealServIndexThe number of the real server.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.48.1.1 |
slbCurCfgRealServPortIndexThe port index. This has no external meaningro INTEGER .1.3.6.1.4.1.33555.4.4.5.48.1.2 |
slbCurCfgRealServRealPortThe layer4 real service port number.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.48.1.3 |
slbNewCfgRealServPortTableThe table of real server service ports. SEQUENCE OF SlbNewCfgRealServPortEntry .1.3.6.1.4.1.33555.4.4.5.49 |
slbNewCfgRealServPortEntryA row in the real server service ports table. SlbNewCfgRealServPortEntry .1.3.6.1.4.1.33555.4.4.5.49.1 |
slbNewCfgRealServIndexThe number of the real server.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.49.1.1 |
slbNewCfgRealServPortIndexThe port index. This has no external meaningro INTEGER .1.3.6.1.4.1.33555.4.4.5.49.1.2 |
slbNewCfgRealServRealPortThe layer4 real service port number.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.49.1.3 |
slbNewCfgRealServPortDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.49.1.4 |
slbCurCfgUrlBwmTableThe table of URL based BWM for Virtual Services. SEQUENCE OF SlbCurCfgUrlBwmEntry .1.3.6.1.4.1.33555.4.4.5.50 |
slbCurCfgUrlBwmEntryA row in the URL based BWM virtual services table. SlbCurCfgUrlBwmEntry .1.3.6.1.4.1.33555.4.4.5.50.1 |
slbCurCfgUrlBwmVirtServIndexThe number of the virtual server.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.50.1.1 |
slbCurCfgUrlBwmVirtServiceIndexThe service index. This has no external meaningro INTEGER .1.3.6.1.4.1.33555.4.4.5.50.1.2 |
slbCurCfgUrlBwmUrlIdThe URL Path Identifier.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.50.1.3 |
slbCurCfgUrlBwmContractThe BW contract number.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.50.1.4 |
slbNewCfgUrlBwmTableThe table of URL based BWM for Virtual Services. SEQUENCE OF SlbNewCfgUrlBwmEntry .1.3.6.1.4.1.33555.4.4.5.51 |
slbNewCfgUrlBwmEntryA row in the URL based BWM virtual services table. SlbNewCfgUrlBwmEntry .1.3.6.1.4.1.33555.4.4.5.51.1 |
slbNewCfgUrlBwmVirtServIndexThe number of the virtual server.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.51.1.1 |
slbNewCfgUrlBwmVirtServiceIndexThe service index. This has no external meaningro INTEGER .1.3.6.1.4.1.33555.4.4.5.51.1.2 |
slbNewCfgUrlBwmUrlIdThe URL Path Identifier.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.51.1.3 |
slbNewCfgUrlBwmContractThe BW contract number.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.51.1.4 |
slbNewCfgUrlBwmDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.51.1.5 |
slbRurl OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.52 |
slbRurlGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.52.1 |
slbCurCfgRurlGenDenyThis is for controlling if the switch should deny packets from
passing through to L2 in the event that the switch runs out of
buffer resources.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.52.1.1 |
slbNewCfgRurlGenDenyThis is for controlling if the switch should deny packets from
passing through to L2 in the event that the switch runs out of
buffer resources.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.52.1.2 |
slbRurlDportTableMaxSizeThe maximum number of entries in RURL destination port table.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.52.2 |
slbCurCfgRurlDportTableThe table of RURL destination port ranges in current_config. SEQUENCE OF SlbCurCfgRurlDportTableEntry .1.3.6.1.4.1.33555.4.4.5.52.3 |
slbCurCfgRurlDportTableEntryInformation about a destination port range for RURL parsing. SlbCurCfgRurlDportTableEntry .1.3.6.1.4.1.33555.4.4.5.52.3.1 |
slbCurCfgRurlDportIndexThe RURL destination port table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.52.3.1.1 |
slbCurCfgRurlDportLowPortThe first destination port in the port range.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.52.3.1.2 |
slbCurCfgRurlDportHighPortThe last destination port in the port range.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.52.3.1.3 |
slbNewCfgRurlDportTableThe table of RURL destination port ranges in new_config. SEQUENCE OF SlbNewCfgRurlDportTableEntry .1.3.6.1.4.1.33555.4.4.5.52.4 |
slbNewCfgRurlDportTableEntryInformation about a destination port range for RURL parsing. SlbNewCfgRurlDportTableEntry .1.3.6.1.4.1.33555.4.4.5.52.4.1 |
slbNewCfgRurlDportIndexThe RURL destination port table index.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.52.4.1.1 |
slbNewCfgRurlDportLowPortThe first destination port in the port range.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.52.4.1.2 |
slbNewCfgRurlDportHighPortThe last destination port in the port range.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.52.4.1.3 |
slbNewCfgRurlDportDeleteAction object to delete an destination port/range. When set to the
value of 2 (delete), the entire row is deleted. When read,
other(1) is returned. Setting the value to anything other
than delete(2) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.52.4.1.4 |
slbRealServPortTableMaxSizeThe maximum number of entries in SLB RealServPortTable.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.53 |
slbPortTableMaxSizeThe maximum number of entries in SLB Port Table.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.54 |
slbVirtServicesTableMaxSizeThe maximum number of entries in SLB Virtual Services Table.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.55 |
slbUrlBwmTableMaxSizeThe maximum number of entries in SLB URL BWM Table.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.56 |
slbPeerTableMaxSizeThe maximum number of entries in SLB Peer Table.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.57 |
slbCurCfgFastageSession table fast-age (1 sec) period bit shift.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.58 |
slbNewCfgFastageSession table fast-age (1 sec) period bit shift.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.59 |
slbCurCfgSlowageSession table slow-age (2 min) period bit shift.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.60 |
slbNewCfgSlowageSession table slow-age (2 min) period bit shift.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.61 |
slbWaphc OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.62 |
slbCurCfgWaphcWSPPortThe WSP port number to health check.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.62.1 |
slbNewCfgWaphcWSPPortThe WSP port number to health check.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.62.2 |
slbCurCfgWaphcOffsetThe offset in received WSP packet.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.62.3 |
slbNewCfgWaphcOffsetThe offset in received WSP packet.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.62.4 |
slbCurCfgWaphcSndContentThe content to be sent to the WAP gateway.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.62.5 |
slbNewCfgWaphcSndContentThe content to be sent to the WAP gateway.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.62.6 |
slbCurCfgWaphcRcvContentThe content to be received from the WAP gateway.ro DisplayString .1.3.6.1.4.1.33555.4.4.5.62.7 |
slbNewCfgWaphcRcvContentThe content to be received from the WAP gateway.rw DisplayString .1.3.6.1.4.1.33555.4.4.5.62.8 |
slbCurCfgWaphcWTLSPortThe WTLS port number to health check.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.62.9 |
slbNewCfgWaphcWTLSPortThe WTLS port number to health check.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.62.10 |
slbWap OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.63 |
slbCurCfgWapTpcpEnable or disable WAP load balancing.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.63.1 |
slbNewCfgWapTpcpEnable or disable WAP load balancing.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.63.2 |
slbCurCfgWapDebugWAP Debug level.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.63.3 |
slbNewCfgWapDebugWAP Debug level.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.63.4 |
slbCurCfgSyncBwmEnable or disable syncing BWM configuration.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.64 |
slbNewCfgSyncBwmEnable or disable syncing BWM configuration.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.65 |
slbCurCfgTpcpEnable or disable Transparent Proxy Cache Protocol.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.66 |
slbNewCfgTpcpEnable or disable Transparent Proxy Cache Protocol.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.67 |
slbCurCfgMetricIntervalThe interval of response and bandwidth metric updates.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.68 |
slbNewCfgMetricIntervalThe interval of response and bandwidth metric updates.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.69 |
slbCurCfgRealGroupIdslbThe real server group number for IDSLB.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.70 |
slbNewCfgRealGroupIdslbThe real server group number for IDSLB.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.71 |
slbCurCfgLdapVersionThe version number for LDAP.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.72 |
slbNewCfgLdapVersionThe Version number of LDAP.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.73 |
slbCurCfgIsdIntervalThe interval of ISD health checks.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.74 |
slbNewCfgIsdIntervalThe interval of ISD health checks.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.75 |
slbCurCfgIsdRetryThe number of failed attemps to declare ISD down.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.76 |
slbNewCfgIsdRetryThe number of failed attemps to declare ISD down.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.77 |
slbCurCfgIsdRestrThe number of successful attemps to declare ISD up.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.78 |
slbNewCfgIsdRestrThe number of successful attemps to declare ISD up.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.79 |
slbCurCfgIsdNumberThe number of real servers used for ISDs.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.80 |
slbNewCfgIsdNumberThe number of real servers used for ISDs.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.81 |
synAttackDetCfg OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.5.82 |
synAttackCurCfgIntervalThe interval specified in seconds determines how frequently the
switch checks for SYN attacks.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.82.1 |
synAttackNewCfgIntervalThe interval specified in seconds determines how frequently the
switch checks for SYN attacks.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.82.2 |
synAttackCurCfgThreshholdThe threshhold indicating the number of new half-open sessions
per second.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.82.3 |
synAttackNewCfgThreshholdThe threshhold indicating the number of new half-open sessions
per second.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.82.4 |
slbCurCfgTcpTimeWindowThe time window for TCP rate limiting.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.83 |
slbNewCfgTcpTimeWindowThe time window for TCP rate limiting.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.84 |
slbCurCfgTcpHoldDurationThe hold down duration for TCP rate limiting.ro INTEGER .1.3.6.1.4.1.33555.4.4.5.85 |
slbNewCfgTcpHoldDurationThe hold down duration for TCP rate limiting.rw INTEGER .1.3.6.1.4.1.33555.4.4.5.86 |
slbCurCfgAllowHttpHcEnable or disable allow HTTP health check on any port.
If disabled the non-HTTP virtual services will use TCP Health Checks,
if enabled the HTTP Content Health Check will be sent to any port
except HTTPS (443) if properly configured.ro Enumeration .1.3.6.1.4.1.33555.4.4.5.87 |
slbNewCfgAllowHttpHcEnable or disable allow HTTP health check on any port.
If disabled the non-HTTP virtual services will use TCP Health Checks,
if enabled the HTTP Content Health Check will be sent to any port
except HTTPS (443) if properly configured.rw Enumeration .1.3.6.1.4.1.33555.4.4.5.88 |
filtering OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.10 |
fltCfgTableMaxSizeThe maximum number of filtering table entries.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.1 |
fltCurCfgTableThe filtering table in the current configuration block. SEQUENCE OF FltCurCfgTableEntry .1.3.6.1.4.1.33555.4.4.10.2 |
fltCurCfgTableEntryA row in the filtering table. FltCurCfgTableEntry .1.3.6.1.4.1.33555.4.4.10.2.1 |
fltCurCfgIndxThe filteriang table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.1 |
fltCurCfgSrcIpThe source IP address to be filtered.ro IpAddress .1.3.6.1.4.1.33555.4.4.10.2.1.2 |
fltCurCfgSrcIpMaskThe source IP sub-net mask for filtering.ro IpAddress .1.3.6.1.4.1.33555.4.4.10.2.1.3 |
fltCurCfgDstIpThe destination IP address to be filtered.ro IpAddress .1.3.6.1.4.1.33555.4.4.10.2.1.4 |
fltCurCfgDstIpMaskThe destination IP sub-net mask for filtering.ro IpAddress .1.3.6.1.4.1.33555.4.4.10.2.1.5 |
fltCurCfgProtocolThe protocol to be filtered.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.6 |
fltCurCfgRangeHighSrcPortThe higher source TCP/UDP port number to be filtered. It applies
only when protocol defined in fltCurCfgProtocol is UDP or TCP.
'0' means no filtering.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.7 |
fltCurCfgRangeLowSrcPortThe lower source TCP/UDP port number to be filtered. It applies
only when protocol defined in fltCurCfgProtocol is UDP or TCP.
'0' means no filtering.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.8 |
fltCurCfgRangeLowDstPortThe lower destination TCP/UDP port number to be filtered. It applies
only when protocol defined in fltCurCfgProtocol is UDP or TCP.
'0' means no filtering.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.9 |
fltCurCfgRangeHighDstPortThe higher destination TCP/UDP port number to be filtered. It applies
only when protocol defined in fltCurCfgProtocol is UDP or TCP.
'0' means no filtering.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.10 |
fltCurCfgActionThe action for the filtering rule.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.11 |
fltCurCfgRedirPortThe real server port number used for redirection.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.12 |
fltCurCfgRedirGroupThe real server group to be redirected to.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.13 |
fltCurCfgLogEnable or disable logging.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.14 |
fltCurCfgStateThe state of this filtering rule.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.15 |
fltCurCfgNatThe selection of destination or source for network address
translation.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.16 |
fltCurCfgCacheEnable or disable caching sessions that match filter.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.17 |
fltCurCfgInvertTurn the invert logic on or off for the filter entry.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.18 |
fltCurCfgClientProxyEnable or disable client proxy.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.19 |
fltCurCfgTcpAckEnable or disable filtering on matching TCP ACK and RST flag.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.20 |
fltCurCfgUrlRedirEnable or disable URL redirection. The URL expressions are
defined in slbCurCfgUrlTable.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.21 |
fltCurCfgSrcMacThe source MAC address to be filtered.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.33555.4.4.10.2.1.22 |
fltCurCfgDstMacThe Destination MAC address to be filtered.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.33555.4.4.10.2.1.23 |
fltCurCfgFtpNatActiveEnable or disable FTP NAT for active ftp only.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.24 |
fltCurCfgAclTcpUrgEnable or disable TCP URG packet.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.25 |
fltCurCfgAclTcpAckEnable or disable TCP ACK packet.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.26 |
fltCurCfgAclTcpPshEnable or disable TCP PSH packet.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.27 |
fltCurCfgAclTcpRstEnable or disable TCP RST packet.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.28 |
fltCurCfgAclTcpSynEnable or disable TCP SYN packet.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.29 |
fltCurCfgAclTcpFinEnable or disable TCP FIN packet.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.30 |
fltCurCfgAclIcmpICMP type to be filtered. A ICMP type of 255 indicates 'any'ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.31 |
fltCurCfgAclIpOptionEnable or disable IP option matching.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.32 |
fltCurCfgBwmContractFilt default BW contract number.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.33 |
fltCurCfgAclIpTosThe IP TOS value to be filtered.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.34 |
fltCurCfgAclIpTosMaskThe IP TOS mask for filtering.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.35 |
fltCurCfgAclIpTosNewThe new IP TOS value to over-write when filtering fired.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.36 |
fltCurCfgFwlbEnable or disable filtering on firewall redirect hash method.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.37 |
fltCurCfgNatTimeoutThe NAT session timeout. The timeout value should be an even number
between (4..30)ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.38 |
fltCurCfgRurlEnable or disable RURL parsing.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.39 |
fltCurCfgLinklbEnable or disable WAN link load balancing.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.40 |
fltCurCfgWapRadiusSnoopEnable or disable WAP RADIUS snooping.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.41 |
fltCurCfgSrcIpMacSet a flag indicating whether filtering should be based on the
source IP address or the source MAC address field.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.42 |
fltCurCfgDstIpMacSet a flag indicating whether filtering should be based on the
destination IP address or the destination MAC address field.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.43 |
fltCurCfgIdslbHashSet hash parameter for intrusion detection server load balancing.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.44 |
fltCurCfgVlanSet the VLAN assoicated with the filter.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.45 |
fltCurCfgNameThe name of the filter.ro DisplayString .1.3.6.1.4.1.33555.4.4.10.2.1.46 |
fltCurCfgTcpRateLimitEnable or disable TCP connection rate limiting.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.47 |
fltCurCfgTcpRateMaxConnSet maximum connections (number of connections in units of 10)
for TCP connection rate limiting.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.2.1.48 |
fltCurCfgHashSet hash parameter for the filter.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.49 |
fltCurCfgNasaEnable or disable NASA redirect to ISD.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.50 |
fltCurCfgLayer7DenyStateEnable or disable layer 7 deny filtering.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.2.1.51 |
fltCurCfgLayer7DenyUrlBmapThe URL strings selected for Layer 7 deny filters.
The selected URL strings are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ URL Path 9
|| ||
|| ||___ URL Path 8
|| |____ URL Path 7
|| . . .
||_________ URL Path 2
|__________ URL Path 1
where x : 1 - The represented URL string is selected
0 - The represented URL string is not selectedro OCTET STRING .1.3.6.1.4.1.33555.4.4.10.2.1.52 |
fltNewCfgTableThe filtering table in the new configuration block. SEQUENCE OF FltNewCfgTableEntry .1.3.6.1.4.1.33555.4.4.10.3 |
fltNewCfgTableEntryA row in the filtering table. FltNewCfgTableEntry .1.3.6.1.4.1.33555.4.4.10.3.1 |
fltNewCfgIndxThe filtering table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.1 |
fltNewCfgSrcIpThe source IP address to be filtered.rw IpAddress .1.3.6.1.4.1.33555.4.4.10.3.1.2 |
fltNewCfgSrcIpMaskThe source IP sub-net mask for filtering.rw IpAddress .1.3.6.1.4.1.33555.4.4.10.3.1.3 |
fltNewCfgDstIpThe destination IP address to be filtered.rw IpAddress .1.3.6.1.4.1.33555.4.4.10.3.1.4 |
fltNewCfgDstIpMaskThe destination IP sub-net mask for filtering.rw IpAddress .1.3.6.1.4.1.33555.4.4.10.3.1.5 |
fltNewCfgProtocolThe protocol to be filtered.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.6 |
fltNewCfgRangeHighSrcPortThe higher source TCP/UDP port number to be filtered. It applies
only when protocol defined in fltNewCfgProtocol is UDP or TCP.
'0' means no filtering.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.7 |
fltNewCfgRangeLowSrcPortThe lower source TCP/UDP port number to be filtered. It applies
only when protocol defined in fltNewCfgProtocol is UDP or TCP.
'0' means no filtering.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.8 |
fltNewCfgRangeLowDstPortThe lower destination TCP/UDP port number to be filtered.
It applies only when protocol defined in fltNewCfgProtocol
is UDP or TCP. '0' means no filtering.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.9 |
fltNewCfgRangeHighDstPortThe higher destination TCP/UDP port number to be filtered.
It applies only when protocol defined in fltNewCfgProtocol
is UDP or TCP. '0' means no filtering.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.10 |
fltNewCfgActionThe action for the filtering rule.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.11 |
fltNewCfgRedirPortThe real server port number used for redirection.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.12 |
fltNewCfgRedirGroupThe real server group to be redirected to.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.13 |
fltNewCfgLogEnable or disable logging.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.14 |
fltNewCfgStateThe state of this filtering rule.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.15 |
fltNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.16 |
fltNewCfgNatThe selection of destination or source for network address
translation.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.17 |
fltNewCfgCacheEnable or disable caching sessions that match filter.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.18 |
fltNewCfgInvertTurn the invert logic on or off for the filter entry.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.19 |
fltNewCfgClientProxyEnable or disable client proxy.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.20 |
fltNewCfgTcpAckEnable or disable filtering on matching TCP ACK and RST flag.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.21 |
fltNewCfgUrlRedirEnable or disable URL redirection. The URL expressions are
defined in slbNewCfgUrlTable.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.22 |
fltNewCfgSrcMacThe source MAC address to be filtered.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.33555.4.4.10.3.1.23 |
fltNewCfgDstMacThe Destination MAC address to be filtered.rw PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.33555.4.4.10.3.1.24 |
fltNewCfgFtpNatActiveEnable or disable FTP NAT for active ftp.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.25 |
fltNewCfgAclTcpUrgEnable or disable TCP URG packet.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.26 |
fltNewCfgAclTcpAckEnable or disable TCP ACK packet.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.27 |
fltNewCfgAclTcpPshEnable or disable TCP PSH packet.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.28 |
fltNewCfgAclTcpRstEnable or disable TCP RST packet.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.29 |
fltNewCfgAclTcpSynEnable or disable TCP SYN packet.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.30 |
fltNewCfgAclTcpFinEnable or disable TCP FIN packet.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.31 |
fltNewCfgAclIcmpICMP type to be filtered. A ICMP type of 255 indicates 'any'rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.32 |
fltNewCfgAclIpOptionEnable or disable IP option matching.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.33 |
fltNewCfgBwmContractFilt default BW contract number.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.34 |
fltNewCfgAclIpTosThe IP TOS value to be filtered.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.35 |
fltNewCfgAclIpTosMaskThe IP TOS mask for filtering.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.36 |
fltNewCfgAclIpTosNewThe new IP TOS value to over-write when filtering fired.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.37 |
fltNewCfgFwlbEnable or disable filtering on firewall redirect hash method.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.38 |
fltNewCfgNatTimeoutThe NAT session timeout. The timeout value should be an even
number between (4..30)rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.39 |
fltNewCfgRurlEnable or disable RURL parsing.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.40 |
fltNewCfgLinklbEnable or disable WAN link load balancing.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.41 |
fltNewCfgWapRadiusSnoopEnable or disable WAP RADIUS snooping.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.42 |
fltNewCfgSrcIpMacSet a flag indicating whether filtering should be based on the
source IP address or the source MAC address field.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.43 |
fltNewCfgDstIpMacSet a flag indicating whether filtering should be based on the
destination IP address or the destination MAC address field.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.44 |
fltNewCfgIdslbHashSet hash parameter for intrusion detection server load balancing.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.45 |
fltNewCfgVlanSet the VLAN assoicated with the filter.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.46 |
fltNewCfgNameThe name of the filter.rw DisplayString .1.3.6.1.4.1.33555.4.4.10.3.1.47 |
fltNewCfgTcpRateLimitEnable or disable TCP connection rate limiting.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.48 |
fltNewCfgTcpRateMaxConnSet maximum connections (number of connections in units of 10)
for TCP connection rate limiting.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.49 |
fltNewCfgHashSet hash parameter for the filter.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.50 |
fltNewCfgNasaEnable or disable NASA redirect to ISD.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.51 |
fltNewCfgLayer7DenyStateEnable or disable layer 7 deny filtering.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.3.1.52 |
fltNewCfgLayer7DenyUrlBmapThe URL strings selected for Layer 7 deny filters.
The selected URL strings are presented in a bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ URL Path 9
|| ||
|| ||___ URL Path 8
|| |____ URL Path 7
|| . . .
||_________ URL Path 2
|__________ URL Path 1
where x : 1 - The represented URL string is selected
0 - The represented URL string is not selectedro OCTET STRING .1.3.6.1.4.1.33555.4.4.10.3.1.53 |
fltNewCfgLayer7DenyAddUrlThe URL Path (slbCurCfgUrlLbPathIndex) to be added to the
Layer 7 deny filter. A zero is returned when read.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.54 |
fltNewCfgLayer7DenyRemUrlThe URL Path (slbCurCfgUrlLbPathIndex) to be removed from
the Layer 7 deny filter. A zero is returned when read.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.3.1.55 |
fltCurCfgPortTableThe filtering port table in the current configuration block. SEQUENCE OF FltCurCfgPortTableEntry .1.3.6.1.4.1.33555.4.4.10.4 |
fltCurCfgPortTableEntryA row in the filtering port table. FltCurCfgPortTableEntry .1.3.6.1.4.1.33555.4.4.10.4.1 |
fltCurCfgPortIndxThe port index.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.4.1.1 |
fltCurCfgPortStateEnable or disable filtering.ro Enumeration .1.3.6.1.4.1.33555.4.4.10.4.1.2 |
fltCurCfgPortFiltBmapThe filtering rules applied to the port. The filtering rules are
presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltCurCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the portro OCTET STRING .1.3.6.1.4.1.33555.4.4.10.4.1.3 |
fltNewCfgPortTableThe filtering port table in the new configuration block. SEQUENCE OF FltNewCfgPortTableEntry .1.3.6.1.4.1.33555.4.4.10.5 |
fltNewCfgPortTableEntryA row in the filtering port table. FltNewCfgPortTableEntry .1.3.6.1.4.1.33555.4.4.10.5.1 |
fltNewCfgPortIndxThe port index.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.5.1.1 |
fltNewCfgPortStateEnable or disable filtering.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.5.1.2 |
fltNewCfgPortFiltBmapThe filtering rules applied to the port. The filtering rules
are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ filter 9
|| ||
|| ||___ filter 8
|| |____ filter 7
|| . . .
||_________ filter 2
|__________ filter 1 (as index to fltNewCfgTable)
where x : 1 - The represented filter rule applied to the port
0 - The represented filter rule not applied to the portrw OCTET STRING .1.3.6.1.4.1.33555.4.4.10.5.1.3 |
fltNewCfgPortAddFiltRuleThis is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is between 1 and fltCurCfgTableMaxSize. When read, the
value '0' is returned always.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.5.1.4 |
fltNewCfgPortRemFiltRuleThis is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid index is between 1 and fltCurCfgTableMaxSize. When read,
the value '0' is returned always.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.5.1.5 |
fltCurCfgUrlBwmTableThe table of URL based BWM for filtering. SEQUENCE OF FltCurCfgUrlBwmEntry .1.3.6.1.4.1.33555.4.4.10.6 |
fltCurCfgUrlBwmEntryA row in the URL based BWM filtering table. FltCurCfgUrlBwmEntry .1.3.6.1.4.1.33555.4.4.10.6.1 |
fltCurCfgUrlBwmFltIndexThe number of the filter.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.6.1.1 |
fltCurCfgUrlBwmUrlIdThe URL Path Identifier.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.6.1.2 |
fltCurCfgUrlBwmContractThe BW contract.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.6.1.3 |
fltNewCfgUrlBwmTableThe table of URL based BWM for filtering. SEQUENCE OF FltNewCfgUrlBwmEntry .1.3.6.1.4.1.33555.4.4.10.7 |
fltNewCfgUrlBwmEntryA row in the URL based BWM filtering table. FltNewCfgUrlBwmEntry .1.3.6.1.4.1.33555.4.4.10.7.1 |
fltNewCfgUrlBwmFltIndexThe number of the filter.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.7.1.1 |
fltNewCfgUrlBwmUrlIdThe URL Path Identifier.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.7.1.2 |
fltNewCfgUrlBwmContractThe BW traffic contract.rw INTEGER .1.3.6.1.4.1.33555.4.4.10.7.1.3 |
fltNewCfgUrlBwmDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.33555.4.4.10.7.1.4 |
fltUrlBwmTableMaxSizeThe maximum number of URL based BWM entries.ro INTEGER .1.3.6.1.4.1.33555.4.4.10.8 |
globalSLB OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.11 |
gslbGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.11.1 |
gslbCurCfgGenStateTurn on or off Distributed Server Load Balance.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.1.1 |
gslbNewCfgGenStateTurn on or off Distributed Server Load Balance.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.1.2 |
gslbCurCfgGenDnsHandoffEnable/Disable DNS handoffs in the current_configuration block.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.1.3 |
gslbNewCfgGenDnsHandoffEnable/Disable DNS handoffs in the new_configuration block.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.1.4 |
gslbCurCfgGenDnsTTLTime to live value in minute of DNS resource records in
the current_configuration block.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.1.5 |
gslbNewCfgGenDnsTTLTime to live value in minute of DNS resource records in
the new_configuration block.rw INTEGER .1.3.6.1.4.1.33555.4.4.11.1.6 |
gslbCurCfgGenHttpRedirectEnable/Disable DNS handoffs in the current_configuration block.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.1.7 |
gslbNewCfgGenHttpRedirectEnable/Disable DNS handoffs in the new_configuration block.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.1.8 |
gslbCurCfgGenRemSiteUpdateIntervalThe time interval in minute for updating remote site status
in the current_configuration block.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.1.9 |
gslbNewCfgGenRemSiteUpdateIntervalThe time interval in minute for updating remote site status
in the new_configuration block.rw INTEGER .1.3.6.1.4.1.33555.4.4.11.1.10 |
gslbCurCfgGenDnsLocalPrefEnable/Disable DNS responses with only local addresses.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.1.11 |
gslbNewCfgGenDnsLocalPrefEnable/Disable DNS responses with only local addresses.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.1.12 |
gslbCurCfgGenMincoMinmum number of site connections in the current_configuration block.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.1.13 |
gslbNewCfgGenMincoMinmum number of site connections in the new_configuration block.rw INTEGER .1.3.6.1.4.1.33555.4.4.11.1.14 |
gslbCurCfgGenOneEnable/Disable DNS responses with only one address.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.1.15 |
gslbNewCfgGenOneEnable/Disable DNS responses with only one address.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.1.16 |
gslbCurCfgGenUsernEnable/Disable HTTP redirect to real server name.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.1.17 |
gslbNewCfgGenUsernEnable/Disable HTTP redirect to real server name.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.1.18 |
gslbCurCfgGenGeoEnable/Disable geographic awareness.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.1.19 |
gslbNewCfgGenGeoEnable/Disable geographic awareness.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.1.20 |
gslbCurCfgGenAlwaysEnable/Disable DNS responses with at least one address.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.1.21 |
gslbNewCfgGenAlwaysEnable/Disable DNS responses with at least one address.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.1.22 |
gslbCurCfgGenWeightSets the local weight. The higher the weight value, the
more connections that will be directed to the local site.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.1.23 |
gslbNewCfgGenWeightSets the local weight. The higher the weight value, the
more connections that will be directed to the local site.rw INTEGER .1.3.6.1.4.1.33555.4.4.11.1.24 |
gslbDNS OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.11.2 |
dnsCurCfgPrimaryIpAddrThe DNS primary IP address in the current_configuration block.ro IpAddress .1.3.6.1.4.1.33555.4.4.11.2.1 |
dnsNewCfgPrimaryIpAddrThe DNS primary IP address in the new_configuration block.rw IpAddress .1.3.6.1.4.1.33555.4.4.11.2.2 |
dnsCurCfgSecondaryIpAddrThe DNS primary IP address in the current_configuration block.ro IpAddress .1.3.6.1.4.1.33555.4.4.11.2.3 |
dnsNewCfgSecondaryIpAddrThe DNS primary IP address in the new_configuration block.rw IpAddress .1.3.6.1.4.1.33555.4.4.11.2.4 |
dnsCurCfgDomainNameThe DNS doamin name in the current_configuration block.ro DisplayString .1.3.6.1.4.1.33555.4.4.11.2.5 |
dnsNewCfgDomainNameThe DNS doamin name in the new_configuration block.rw DisplayString .1.3.6.1.4.1.33555.4.4.11.2.6 |
gslbSites OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.11.3 |
gslbRemSiteTableMaxSizeThe maximum number of GSLB remote sites.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.3.1 |
gslbCurCfgRemSiteTableThe GSLB remote sites table in the current configuration block. SEQUENCE OF GslbCurCfgRemSiteTableEntry .1.3.6.1.4.1.33555.4.4.11.3.2 |
gslbCurCfgRemSiteTableEntryA row in the GSLB remote sites table. GslbCurCfgRemSiteTableEntry .1.3.6.1.4.1.33555.4.4.11.3.2.1 |
gslbCurCfgRemSiteIndxThe GSLB remote sites table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.3.2.1.1 |
gslbCurCfgRemSitePrimaryIpThe primary IP address of the remote site in the
current_configuration block.ro IpAddress .1.3.6.1.4.1.33555.4.4.11.3.2.1.2 |
gslbCurCfgRemSiteSecondaryIpThe secondary IP address of the remote site in the
current_configuration block.ro IpAddress .1.3.6.1.4.1.33555.4.4.11.3.2.1.3 |
gslbCurCfgRemSiteStateEnable/Disable GSLB for the remote site in the
current_configuration block.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.3.2.1.4 |
gslbCurCfgRemSiteUpdateEnable/Disable GSLB for the remote site status update in the
current_configuration block.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.3.2.1.5 |
gslbCurCfgRemSiteNameThe name of the GSLB remote site.ro DisplayString .1.3.6.1.4.1.33555.4.4.11.3.2.1.6 |
gslbNewCfgRemSiteTableThe GSLB remote sites table in the current configuration block. SEQUENCE OF GslbNewCfgRemSiteTableEntry .1.3.6.1.4.1.33555.4.4.11.3.3 |
gslbNewCfgRemSiteTableEntryA row in the GSLB remote sites table. GslbNewCfgRemSiteTableEntry .1.3.6.1.4.1.33555.4.4.11.3.3.1 |
gslbNewCfgRemSiteIndxThe GSLB remote sites table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.3.3.1.1 |
gslbNewCfgRemSitePrimaryIpThe primary IP address of the remote site in the new_configuration
block.rw IpAddress .1.3.6.1.4.1.33555.4.4.11.3.3.1.2 |
gslbNewCfgRemSiteSecondaryIpThe secondary IP address of the remote site in the new_configuration
block.rw IpAddress .1.3.6.1.4.1.33555.4.4.11.3.3.1.3 |
gslbNewCfgRemSiteStateEnable/Disable GSLB for the remote site in the new_configuration
block.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.3.3.1.4 |
gslbNewCfgRemSiteUpdateEnable/Disable GSLB for the remote site status update in the
new_configuration block.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.3.3.1.5 |
gslbNewCfgRemSiteDeleteBy setting the value to delete(2), the entire row is deleted.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.3.3.1.6 |
gslbNewCfgRemSiteNameThe name of the GSLB remote site.rw DisplayString .1.3.6.1.4.1.33555.4.4.11.3.3.1.7 |
gslbLookup OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.11.4 |
gslbCurCfgGenLookupsEnable or disable network preference lookups.ro Enumeration .1.3.6.1.4.1.33555.4.4.11.4.1 |
gslbNewCfgGenLookupsEnable or disable network preference lookups.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.4.2 |
gslbCurCfgGenLookupDnameDomain name for internal lookup tablero DisplayString .1.3.6.1.4.1.33555.4.4.11.4.3 |
gslbNewCfgGenLookupDnameDomain name for internal lookup tablerw DisplayString .1.3.6.1.4.1.33555.4.4.11.4.4 |
gslbNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.11.4.5 |
gslbNetworkTableMaxSizeThe maximum number of GSLB Internet network preference entries.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.4.5.1 |
gslbCurCfgNetworkTableThe table of Internet network preference in the current_config. SEQUENCE OF GslbCurCfgNetworkTableEntry .1.3.6.1.4.1.33555.4.4.11.4.5.2 |
gslbCurCfgNetworkTableEntryThe table about a network preference entry configuration. GslbCurCfgNetworkTableEntry .1.3.6.1.4.1.33555.4.4.11.4.5.2.1 |
gslbCurCfgNetworkIndxThe current Internet network preference table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.4.5.2.1.1 |
gslbCurCfgNetworkSourceIpThe Source IP address of the network table.ro IpAddress .1.3.6.1.4.1.33555.4.4.11.4.5.2.1.2 |
gslbCurCfgNetworkNetMaskThe Net mask of the network table.ro IpAddress .1.3.6.1.4.1.33555.4.4.11.4.5.2.1.3 |
gslbCurCfgNetworkVip1The Vip1 of the network table.ro IpAddress .1.3.6.1.4.1.33555.4.4.11.4.5.2.1.4 |
gslbCurCfgNetworkVip2The Vip2 of the network table.ro IpAddress .1.3.6.1.4.1.33555.4.4.11.4.5.2.1.5 |
gslbNewCfgNetworkTableThe table of Internet network preference in the new_config. SEQUENCE OF GslbNewCfgNetworkTableEntry .1.3.6.1.4.1.33555.4.4.11.4.5.3 |
gslbNewCfgNetworkTableEntryThe table about a network preference entry configuration. GslbNewCfgNetworkTableEntry .1.3.6.1.4.1.33555.4.4.11.4.5.3.1 |
gslbNewCfgNetworkIndxThe new Internet network preference table index.ro INTEGER .1.3.6.1.4.1.33555.4.4.11.4.5.3.1.1 |
gslbNewCfgNetworkSourceIpThe Source IP address of the network table.rw IpAddress .1.3.6.1.4.1.33555.4.4.11.4.5.3.1.2 |
gslbNewCfgNetworkNetMaskThe Net mask of the network table.rw IpAddress .1.3.6.1.4.1.33555.4.4.11.4.5.3.1.3 |
gslbNewCfgNetworkVip1The Vip1 of the network table.rw IpAddress .1.3.6.1.4.1.33555.4.4.11.4.5.3.1.4 |
gslbNewCfgNetworkVip2The Vip2 of the network table.rw IpAddress .1.3.6.1.4.1.33555.4.4.11.4.5.3.1.5 |
gslbNewCfgNetworkDeleteBy setting the value to delete(2), the entire row is deleted.rw Enumeration .1.3.6.1.4.1.33555.4.4.11.4.5.3.1.12 |
gslbCurCfgGenExternalEnable or disable external lookups.roobsolete Enumeration .1.3.6.1.4.1.33555.4.4.11.4.6 |
gslbNewCfgGenExternalEnable or disable external lookups.rwobsolete Enumeration .1.3.6.1.4.1.33555.4.4.11.4.7 |
gslbCurCfgGenEipExternal lookup IP addressroobsolete IpAddress .1.3.6.1.4.1.33555.4.4.11.4.8 |
gslbNewCfgGenEipExternal lookup IP addressrwobsolete IpAddress .1.3.6.1.4.1.33555.4.4.11.4.9 |
gslbCurCfgGenLookupPortExternal lookup UDP port numberroobsolete INTEGER .1.3.6.1.4.1.33555.4.4.11.4.10 |
gslbNewCfgGenLookupPortExternal lookup UDP port numberrwobsolete INTEGER .1.3.6.1.4.1.33555.4.4.11.4.11 |
gslbCurCfgGenLookupTimeoutExternal lookup Timeout Intervalroobsolete INTEGER .1.3.6.1.4.1.33555.4.4.11.4.12 |
gslbNewCfgGenLookupTimeoutExternal lookup Timeout Intervalrwobsolete INTEGER .1.3.6.1.4.1.33555.4.4.11.4.13 |
dynamicSLB OBJECT IDENTIFIER .1.3.6.1.4.1.33555.4.4.12 |
dynSLBRealServerTableThe table of Real Servers.obsolete SEQUENCE OF DynSLBRealServerEntry .1.3.6.1.4.1.33555.4.4.12.1 |
dynSLBRealServerEntryA row in the Real Server table.obsolete DynSLBRealServerEntry .1.3.6.1.4.1.33555.4.4.12.1.1 |
dynSLBRealServerIpAddrIP address of the Real Server.roobsolete IpAddress .1.3.6.1.4.1.33555.4.4.12.1.1.1 |
dynSLBRealServerPortNumThe switch port that the Real Server is connected to.roobsolete INTEGER .1.3.6.1.4.1.33555.4.4.12.1.1.2 |
dynSLBRealServerWeightThe Real Server weight. The higher the server weight means the
Real Server is allowed to receive more traffic load.rwobsolete INTEGER .1.3.6.1.4.1.33555.4.4.12.1.1.3 |