RAY-MIB
AI MIB Summary
The RAY-MIB module provides SNMP management objects for monitoring and configuring Ray Networks RAy product series, enabling the tracking of interface statistics, system health metrics, and device operational states.
The MIB module defines management objects for RAy product series. Revision 201610040000Z.
Main OID:
ray.1.3.6.1.4.1.33555.1
153
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
153 total| Object Name |
|---|
racom OBJECT IDENTIFIER .1.3.6.1.4.1.33555 |
rayThe MIB module defines management objects for RAy product series. Revision 201610040000Z. MODULE-IDENTITY .1.3.6.1.4.1.33555.1 |
station OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1 |
product OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1.1 |
productNameProduct name.ro DisplayString .1.3.6.1.4.1.33555.1.1.1.1 |
serialNumberProduct serial number.ro Gauge32 .1.3.6.1.4.1.33555.1.1.1.2 |
unitTypeStation type (L or H) and number of the Ethernet ports (1 or 2).ro DisplayString .1.3.6.1.4.1.33555.1.1.1.3 |
info OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1.2 |
deviceNameStation name.ro DisplayString .1.3.6.1.4.1.33555.1.1.2.1 |
swVerFirmware version.ro DisplayString .1.3.6.1.4.1.33555.1.1.2.2 |
swVerRadioRadio firmware version.ro DisplayString .1.3.6.1.4.1.33555.1.1.2.3 |
status OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1.3 |
systemStatusUnit status.ro Enumeration .1.3.6.1.4.1.33555.1.1.3.1 |
lineStatusRadio link status. Supported by RAy10 only.ro Enumeration .1.3.6.1.4.1.33555.1.1.3.2 |
peerNumberPeer station serial number.ro Gauge32 .1.3.6.1.4.1.33555.1.1.3.3 |
rfPowerStatusRF Power amplifier OK/Failure.ro Enumeration .1.3.6.1.4.1.33555.1.1.3.4 |
searchModeDisabledSearch mode disabled on/off. Supported by RAy10 only.ro OptionSetting .1.3.6.1.4.1.33555.1.1.3.5 |
ethPeerPeer station user Ethernet link status. Not supported by RAy2.ro ServiceState .1.3.6.1.4.1.33555.1.1.3.6 |
securePeerModeSecure peer mode. Not supported by RAy10.ro OptionSetting .1.3.6.1.4.1.33555.1.1.3.7 |
lineStatusIIRadio link status. Not supported by RAy10.ro Enumeration .1.3.6.1.4.1.33555.1.1.3.8 |
eth1LinkEthernet 1 link status. Supported by RAy2 only.ro ServiceState .1.3.6.1.4.1.33555.1.1.3.9 |
eth2LinkEthernet 2 link status. Supported by RAy2 only.ro ServiceState .1.3.6.1.4.1.33555.1.1.3.10 |
chassis OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1.4 |
temperatureModemModem temperature in hundredths of Celsius (C).ro Integer32 .1.3.6.1.4.1.33555.1.1.4.1 |
temperatureRadioRadio temperature in hundredths of Celsius (C).ro Integer32 .1.3.6.1.4.1.33555.1.1.4.2 |
voltageUnitPower supply voltage in tenths of Volts (V).ro Integer32 .1.3.6.1.4.1.33555.1.1.4.3 |
voltageSourceSource of supply voltage. Supported by RAy2 only.ro Enumeration .1.3.6.1.4.1.33555.1.1.4.4 |
system OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1.5 |
useCpuSystem use CPU in %.ro INTEGER .1.3.6.1.4.1.33555.1.1.5.1 |
useMemorySystem use memory in %.ro INTEGER .1.3.6.1.4.1.33555.1.1.5.2 |
useLogStorageUse storage for log in %.ro INTEGER .1.3.6.1.4.1.33555.1.1.5.3 |
access OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1.6 |
sshdManagement interface: SSH.ro Enumeration .1.3.6.1.4.1.33555.1.1.6.1 |
telnetdManagement interface: Telnet.ro OptionSetting .1.3.6.1.4.1.33555.1.1.6.2 |
httpdManagement interface: HTTP.ro OptionSetting .1.3.6.1.4.1.33555.1.1.6.3 |
ipManagement interface: IP address.ro IpAddress .1.3.6.1.4.1.33555.1.1.6.4 |
macManagement interface: MAC address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.33555.1.1.6.5 |
managementVlanManagement interface: VLAN on/off.ro OptionSetting .1.3.6.1.4.1.33555.1.1.6.6 |
managementVlanIdManagement interface: VLAN ID.ro Integer32 .1.3.6.1.4.1.33555.1.1.6.7 |
wifiHAPManagement interface: WiFi Host Access Point.ro OptionSetting .1.3.6.1.4.1.33555.1.1.6.8 |
authorization OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1.7 |
keyTableList of product key entries. Supported by RAy10 only. SEQUENCE OF KeyEntry .1.3.6.1.4.1.33555.1.1.7.1 |
keyEntryProduct key entry. Supported by RAy10 only. KeyEntry .1.3.6.1.4.1.33555.1.1.7.1.1 |
keyNameProduct key name. Supported by RAy10 only.ro DisplayString .1.3.6.1.4.1.33555.1.1.7.1.1.1 |
alarm OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.1.8 |
alarmTemperatureTemperature alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.1 |
alarmVoltageLowLow voltage alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.2 |
alarmVoltageHighHigh voltage alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.3 |
alarmRssRSS alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.4 |
alarmSnrSNR alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.5 |
alarmBerBER alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.6 |
alarmPeerDisconnectedPeer disconnect alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.7 |
alarmEth1DownEthernet 1 Link Down alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.8 |
alarmEth2DownEthernet 2 Link Down alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.9 |
alarmRfPowerFailRF Power Fail alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.10 |
alarmNetBitrateAir Speed below Limit alarm state. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.11 |
alarmWifiOnWiFi Host Access Oint on. Supported by RAy2 only.ro AlarmState .1.3.6.1.4.1.33555.1.1.8.12 |
interface OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.2 |
ifRadio OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.2.1 |
rxChannelReceiver channel ID.ro DisplayString .1.3.6.1.4.1.33555.1.2.1.1 |
txChannelTransceiver channel ID.ro DisplayString .1.3.6.1.4.1.33555.1.2.1.2 |
rxFreqReceiver frequency in kHz.ro Gauge32 .1.3.6.1.4.1.33555.1.2.1.3 |
txFreqTransceiver frequency in kHz.ro Gauge32 .1.3.6.1.4.1.33555.1.2.1.4 |
rxModulationRx modulation text ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33555.1.2.1.5 |
txModulationTx modulation text ID.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.33555.1.2.1.6 |
rxModulationIndexRx modulation index.ro ModulationList .1.3.6.1.4.1.33555.1.2.1.7 |
txModulationIndexTx modulation index.ro ModulationList .1.3.6.1.4.1.33555.1.2.1.8 |
bandwidthRadio channel bandwidth. Supported by RAy10 only.ro Enumeration .1.3.6.1.4.1.33555.1.2.1.9 |
codingChannel coding level. Supported by RAy10 only.ro Enumeration .1.3.6.1.4.1.33555.1.2.1.10 |
matchingChannel matching.ro OptionSetting .1.3.6.1.4.1.33555.1.2.1.11 |
rfPowerConfiguredConfigured RF Power in dBm.ro Integer32 .1.3.6.1.4.1.33555.1.2.1.12 |
netBitrateCurrent net bitrate in kbps.ro Integer32 .1.3.6.1.4.1.33555.1.2.1.13 |
maxNetBitrateMaximum net bitrate in Mbps.ro Integer32 .1.3.6.1.4.1.33555.1.2.1.14 |
bandwidthKHzRadio channel bandwidth in kHz. Not supported by RAy10.ro Integer32 .1.3.6.1.4.1.33555.1.2.1.15 |
channelArrangementChannel arrangement. Not supported by RAy10.ro Enumeration .1.3.6.1.4.1.33555.1.2.1.16 |
rfPowerCurrentCurrent RF Power in dBm. Not supported by RAy10.ro Integer32 .1.3.6.1.4.1.33555.1.2.1.17 |
ifEth OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.2.2 |
ifEthTableList of Ethernet interfaces. SEQUENCE OF IfEthEntry .1.3.6.1.4.1.33555.1.2.2.1 |
ifEthEntryEthernet interface entry. IfEthEntry .1.3.6.1.4.1.33555.1.2.2.1.1 |
speedEthernet speed.ro Integer32 .1.3.6.1.4.1.33555.1.2.2.1.1.1 |
duplexEthernet duplex.ro Enumeration .1.3.6.1.4.1.33555.1.2.2.1.1.2 |
mdixEthernet MDI-X / MDI.ro Enumeration .1.3.6.1.4.1.33555.1.2.2.1.1.3 |
autonegoEthernet autonego.ro OptionSetting .1.3.6.1.4.1.33555.1.2.2.1.1.4 |
pauseEthernet pause.ro OptionSetting .1.3.6.1.4.1.33555.1.2.2.1.1.5 |
asymPauseEthernet asymmetric pause.ro OptionSetting .1.3.6.1.4.1.33555.1.2.2.1.1.6 |
prioritizedEthernet prioritized VLAN support. Supported by RAy10 only.ro OptionSetting .1.3.6.1.4.1.33555.1.2.2.2 |
vlanIdEthernet prioritized VLAN ID. Supported by RAy10 only.ro Integer32 .1.3.6.1.4.1.33555.1.2.2.3 |
serviceVlanIdEthernet service VLAN ID between local and remote station. Not supported by RAy2.ro Integer32 .1.3.6.1.4.1.33555.1.2.2.4 |
statistic OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.3 |
modemR OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.3.1 |
rxPauseFramesNumber of received Control frames with a valid PAUSE op-code. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.1 |
rxControlFramesNumber of received Control frames. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.2 |
rxBroadcastNumber of received packets with a broadcast destination address. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.3 |
rxMulticastNumber of received packets with a multicast destination address. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.4 |
rxDonesNumber of successfully received packets. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.5 |
rxOutOfRangeErrorsNumber of received frames larger than 1518 bytes (the frame Type/Length field is indicating a value larger than 1518 bytes). Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.6 |
rxCrcErrorsNumber of received frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.7 |
rxCodeErrorsNumber of received packets with one or more erroneous nibbles. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.8 |
rxFalseCarrierErrorsRx false carrier errors. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.9 |
rxDroppedPktsNumber of dropped packets. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.10 |
rxHCBytesNumber of received bytes. Supported by RAy10 only.ro Counter64 .1.3.6.1.4.1.33555.1.3.1.11 |
txPauseFramesNumber of transmitted Control frames with a valid PAUSE op-code. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.12 |
txControlFramesNumber of transmitted Control frames. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.13 |
txBroadcastNumber of transmitted packets with a broadcast destination address. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.14 |
txMulticastNumber of transmitted packets with a multicast destination address. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.15 |
txDonesNumber of successfully transmitted packets. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.16 |
txLengthCheckErrorsNumber of transmitted packets with the frame Length field (not a Type field) value that does not match the actual data byte length. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.17 |
txCrcErrorsNumber of transmitted frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.18 |
txCollisionsTx collisions. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.1.19 |
txHCBytesNumber of transmitted bytes. Supported by RAy10 only.ro Counter64 .1.3.6.1.4.1.33555.1.3.1.20 |
radio OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.3.2 |
rssReceiving RSS indicator in decimal dBm (-39 -> -3,9).ro Integer32 .1.3.6.1.4.1.33555.1.3.2.1 |
snrReceiving SNR indicator in decimal dB (39 -> 3,9).ro Integer32 .1.3.6.1.4.1.33555.1.3.2.2 |
fecBlockCounterTotal block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.2.3 |
fecUncorrectBlockCounterIncorrect block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only.ro Counter32 .1.3.6.1.4.1.33555.1.3.2.4 |
timeAllConnectOverall link uptime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33555.1.3.2.5 |
timeAllDisconnectOverall link downtime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33555.1.3.2.6 |
timeMaxDisconnectThe longest drop (disconnecting).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33555.1.3.2.7 |
numDisconnectNumber of drops (disconnecting).ro Counter32 .1.3.6.1.4.1.33555.1.3.2.8 |
reliabilityReliability in thousandths of %.ro Integer32 .1.3.6.1.4.1.33555.1.3.2.9 |
linkUptimeCurrent radio link uptime. Not supported by RAy10.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.33555.1.3.2.10 |
berBit Error Rate (BER) multiplied by 10^9. Not supported by RAy10.ro Integer32 .1.3.6.1.4.1.33555.1.3.2.11 |
ethernet OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.3.3 |
ethInThroughputInput Ethernet 1 data port throughput in kbps. Not supported by RAy10.ro Integer32 .1.3.6.1.4.1.33555.1.3.3.1 |
ethOutThroughputOutput Ethernet 1 data port throughput in kbps. Not supported by RAy10.ro Integer32 .1.3.6.1.4.1.33555.1.3.3.2 |
eth2InThroughputInput Ethernet 2 data port throughput in kbps. Supported by RAy2 only.ro Integer32 .1.3.6.1.4.1.33555.1.3.3.3 |
eth2OutThroughputOutput Ethernet 2 data port throughput in kbps. Supported by RAy2 only.ro Integer32 .1.3.6.1.4.1.33555.1.3.3.4 |
rayTraps OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.10 |
airDisconnectAir line disconnected. Not supported by RAy2. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.1 |
airConnectAir line connected after being disconnected. Not supported by RAy2. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.2 |
airWdogAir watch dog. Supported by RAy10 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.3 |
tempAlarmTemperature exceeded the threshold. Not supported by RAy2. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.4 |
powerAlarmPower voltage is out of the thresholds. Not supported by RAy2. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.5 |
memoryAlarmMemory use exceeded the threshold. Supported by RAy10 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.6 |
rssAlarmRSS exceeded the threshold. Not supported by RAy2. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.7 |
snrAlarmSNR exceeded the threshold. Not supported by RAy2. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.8 |
berAlarmBER exceeded the threshold. Not supported by RAy2. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.9 |
rfPowerFailRF Power amplifier failure. Not supported. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.10 |
peerEthLinkDownPeer station Ethernet link Up/Down. Not supported by RAy2. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.10.11 |
ray2Traps OBJECT IDENTIFIER .1.3.6.1.4.1.33555.1.11 |
tr2TemperatureAlarmTemperature exceeded the threshold. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.1 |
tr2VoltageLowAlarmSupply voltage below minimal threshold. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.2 |
tr2VoltageHighAlarmSupply voltage above maximal threshold. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.3 |
tr2RssAlarmRSS exceeded the threshold. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.4 |
tr2SnrAlarmSNR exceeded the threshold. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.5 |
tr2BerAlarmBER exceeded the threshold. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.6 |
tr2AirDisconnectAir line disconnected. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.7 |
tr2AirConnectAir line connected after being disconnected. Supported by RAy2 (up to fw 2.1.7.0) only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.8 |
tr2Eth1LinkDownLocal station Ethernet 1 link Up/Down. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.9 |
tr2Eth21LinkDownLocal station Ethernet 2 link Up/Down. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.10 |
tr2RfPowerFailRF Power amplifier failure. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.11 |
tr2NetBitrateAir speed below threshold. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.12 |
tr2WifiOnWiFi Host Access Point is on. Supported by RAy2 only. NOTIFICATION-TYPE .1.3.6.1.4.1.33555.1.11.13 |