ALTEON-ISD-PLATFORM-MIB
AI MIB Summary
The ALTEON-ISD-PLATFORM-MIB defines the managed objects and trap notifications for monitoring platform-level hardware status, environmental sensors, and system alarms on Alteon iSD application delivery controllers. It enables network administrators to track critical device health indicators, such as power supply states, fan speeds, and temperature thresholds, to detect and respond to hardware failures in production environments.
MIB Module for object and notification definitions for event and alarms common to Alteon iSD products.
Main OID:
alteonPlatformISDModule.1.3.6.1.4.1.1872.2.3.1.1
57
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
alteonPlatformISDModuleMIB Module for object and notification definitions for event and alarms common to Alteon iSD products. MODULE-IDENTITY .1.3.6.1.4.1.1872.2.3.1.1 |
alteonISDPlatformMIBToplevel ID of Alteon Platform ISD MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2 |
isdObjectsObject definitions for the Alteon ISD Platform MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.1 |
isdClusterA collection of objects to configure and monitor the iSDs in the system. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.1.1 |
isdClusterTableTable of iSDs in this iSD cluster. SEQUENCE OF IsdClusterEntry .1.3.6.1.4.1.1872.2.3.1.2.1.1.1 |
isdClusterEntry IsdClusterEntry .1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1 |
isdIndexA unique index for this iSD. Integer32 .1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1.1 |
isdIPThe IP address of the iSD boxro IpAddress .1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1.2 |
isdTypeDefines if a iSD is a master in the cluster, or a slave. Note that there must be at least one master in the cluster. A master iSD keeps copies of the configuration database and software on its flash disk. Slave iSDs reads this info from the masters.rw Enumeration .1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1.3 |
isdOperStatusThe current operational status of the iSD. 'swMismatch' means that the iSD is up, but the software version does not match the rest of the system. The correct software version must be installed on this iSD to make it enter the 'up' state. 'appError' means that the iSD is up, but the applicaion is not functioning, i.e. the iSD does not handle traffic correctly. Check the application specific MIBs for further diagnostics.ro Enumeration .1.3.6.1.4.1.1872.2.3.1.2.1.1.1.1.4 |
isdMIPOwnerThe IP address of the iSD that currently holds the MIP.ro IpAddress .1.3.6.1.4.1.1872.2.3.1.2.1.1.2 |
isdCurrentTimeThe current time on the cluster.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.1872.2.3.1.2.1.1.3 |
isdVersionThe version of the image on the cluster.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.3.1.2.1.1.4 |
isdImageTableA table with resource utilization metrics for the running iSDs. This table extends isdClusterTable. SEQUENCE OF IsdImageEntry .1.3.6.1.4.1.1872.2.3.1.2.1.1.5 |
isdImageEntryA set of Resource utilization metrics for the iSDs. IsdImageEntry .1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1 |
isdImageIndexA unique index for the images installed on the cluster. Integer32 .1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1.1 |
isdImageVersionVersion of the installed imagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1.2 |
isdImageNameName of the installed imagero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1.3 |
isdImageStatusStatus of the installed images 1 - Image that has been verified to work correctly. 2 - Image that is starting up for the first time; it will eventually become permanent. 2 - Previously installed image 3 - Newly downloaded imagero Enumeration .1.3.6.1.4.1.1872.2.3.1.2.1.1.5.1.4 |
isdClusterMIPThe Management IPaddress of the cluster.ro IpAddress .1.3.6.1.4.1.1872.2.3.1.2.1.1.6 |
isdClusterMaskNetwork mask of the cluster.ro IpAddress .1.3.6.1.4.1.1872.2.3.1.2.1.1.7 |
currentAlarmA collection of objects for monitoring of active alarms in the iSD system. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.1.3 |
numberOfCurrentAlarmsNumber of currently active alarms in the system.ro Gauge32 .1.3.6.1.4.1.1872.2.3.1.2.1.3.1 |
currentAlarmLastTimeChangedThe time an entry in the currentAlarmTable was changed. It may be used by a management station as a value to poll. If the value is changed, the management station knows that the currentAlarmTable has been updated. This will have the value of sysUpTime at the time which alarm table was last updated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1872.2.3.1.2.1.3.2 |
currentAlarmTableA list of currently active alarms in the system. SEQUENCE OF CurrentAlarmEntry .1.3.6.1.4.1.1872.2.3.1.2.1.3.3 |
currentAlarmEntryA set of parameters that describe a currently active alarm. CurrentAlarmEntry .1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1 |
currentAlarmIndexAn id that uniquely identifies an alarm. Each active alarm is represented as one an entry in the currentAlarmTable. Integer32 .1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.1 |
currentAlarmSeverityThe perceived severity of the fault. A manager can set this value to clear only. When set to clear, the alarm is removed from this table, and a 'clearAlarm' event is generated.rw AlarmSeverity .1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.2 |
currentAlarmOidThe SNMP Notification which was sent to represent the alarm.ro OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.3 |
currentAlarmObjectThe alarming object.ro OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.4 |
currentAlarmCauseThe probable cause of the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.5 |
currentAlarmTimeThe time the fault was detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.1872.2.3.1.2.1.3.3.1.6 |
isdMonitorA collection of objects for monitoring the performance and resource utilization of the iSDs in the system. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.1.5 |
isdResourceTableA table with resource utilization metrics for the running iSDs. This table extends isdClusterTable. SEQUENCE OF IsdResourceEntry .1.3.6.1.4.1.1872.2.3.1.2.1.5.1 |
isdResourceEntryA set of Resource utilization metrics for the iSDs. IsdResourceEntry .1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1 |
isdResourceUptimeUptime of the iSD.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1.1 |
isdResourceCpuResource load in percent.ro Gauge32 .1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1.2 |
isdResourceMemoryMemory utilization in percent.ro Gauge32 .1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1.3 |
isdResourceDiskDisk utilization in percent. This value is the utilization of the partition with the least percentage of free space.ro Gauge32 .1.3.6.1.4.1.1872.2.3.1.2.1.5.1.1.4 |
isdNotificationsNotification definitions for the Alteon ISD Platform MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.3 |
isdEventsThis group lists events generated by iSDs in the cluster. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.3.1 |
isdAlarmClearedThis event is sent when an alarm has been cleared, either by the system or by an operator. Note that the currentAlarmIndex is implicitly sent as the instance identifier for currentAlarmOid. All alarm-specific variables sent in the alarm notification is also sent in this notifications. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.1.1 |
isdTopologyChangeThis event signals that the topology of the iSD cluster has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.1.2 |
isdAuthenticationFailureThis event signals that an authentication failure has occurred. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.1.4 |
isdMipMigrationThis event signals that the master IP has migrated to another iSD. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.1.5 |
isdAlarmsThis group lists alarms generates by iSDs in the cluster. An alarm is a special form of event which represents a fault in the system that needs to be reported. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.3.2 |
isdDownThis alarm is sent when the iSD goes down. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.2.1 |
isdUpThis alarm is sent when the iSD comes back online. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.2.2 |
isdSingleMasterThis alarm is sent when there is just a sindle iSD master left in the system. The fault tolerance level of the system is severly degraded - if the last master fails, the system cannot be reconfigured. This alarm is only set if there are more than two masters configured in the system. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.2.3 |
isdMemoryStateChangeThis alarm is sent when there is a change in the current status of the memory. It is expected that the user will be able to configure this. The defaults could be that 75% would signal a warning and 90% would be an error. The user would be able to specify these values themselves as well as be able to rearm the system. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.2.4 |
isdCpuStateChangeThis alarm is sent when there is a change in the current status of the CPU. It is expected that the user will be able to configure this. The defaults could be that 75% would signal a warning and 90% would be an error. The user would be able to specify these values themselves as well as be able to rearm the system. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.2.5 |
isdDiskStateChangeThis alarm is sent when there is a change in the current status of the Disk. The partition with the greatest utilization is examined. It is expected that the user will be able to configure this. The defaults could be that 75% would signal a warning and 90% would be an error. The user would be able to specify these values themselves as well as be able to rearm the system. NOTIFICATION-TYPE .1.3.6.1.4.1.1872.2.3.1.2.3.2.6 |
isdNotificationObjectsNotification objects for the Alteon ISD Platform MIB. OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.3.1.2.4 |
isdEventTimeThis object may be included in a notification definition for an event. It specifies the time the event was generated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.1872.2.3.1.2.4.1 |
isdEventDescriptionThis object may be included in a notification definition for an event. It specifies extra information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.3.1.2.4.2 |
isdUtilizationResource utilization in percent.ro Gauge32 .1.3.6.1.4.1.1872.2.3.1.2.4.3 |
isdLoadResource load. 200 means in essence 2 processes want the CPU; this is considered a warning level. 300 means three processes want the CPU; this is considered a critical level.ro Gauge32 .1.3.6.1.4.1.1872.2.3.1.2.4.4 |