ALTEON-CHEETAH-SWITCH-MIB
AI MIB Summary
The ALTEON-CHEETAH-SWITCH-MIB provides SNMP management interfaces for monitoring and configuring Cheetah-based switching hardware running Alteon OS, exposing standard Layer 2/3 metrics including interface statistics, MAC address tables, VLAN configurations, and system resource utilization.
The MIB module for the Alteon OS Switch.
Main OID:
agent.1.3.6.1.4.1.1872.2.5.1
989
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
989 total| Object Name |
|---|
agentThe MIB module for the Alteon OS Switch. MODULE-IDENTITY .1.3.6.1.4.1.1872.2.5.1 |
agentConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1 |
agSystem OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.1 |
agApplyConfigurationThis is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.2 |
agSavePendingThis object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.3 |
agSaveConfigurationThis is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.4 |
agRevertThis is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.5 |
agRevertApplyThis is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.6 |
agResetThis is an action object to reboot the agent. other(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.7 |
agConfigForNxtResetThe configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration blockrw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.8 |
agImageForNxtResetThe software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.9 |
agSoftwareVersionThe version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.10 |
agBootVerThe version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.11 |
agImage1VerThe version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.12 |
agImage2VerThe version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.13 |
agRtcDateThe date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.14 |
agRtcTimeThe time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.15 |
agLastSetErrorReasonThe error reason of the last SET failure.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.16 |
agCurCfgHttpServerPortThe TCP port number that the HTTP server is listening to in the current_configuration block.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.17 |
agNewCfgHttpServerPortThe TCP port number that the HTTP server is listening to in the new_configuration block.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.18 |
agCurCfgLoginBannerThe user defined login banner.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.19 |
agNewCfgLoginBannerThe user defined login banner.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.20 |
agCurCfgSmtpHostThe user defined SMTP host.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.21 |
agNewCfgSmtpHostThe user defined SMTP host.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.1.22 |
agCurCfgConsoleEnable or disable console output of syslog messages.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.23 |
agNewCfgConsoleEnable or disable console output of syslog messages.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.24 |
agCurCfgBootpEnable or disable the use of BootP, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.29 |
agNewCfgBootpEnable or disable the use of BootP, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.30 |
agCurCfgSnmpTimeoutOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.32 |
agNewCfgSnmpTimeoutOnce SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.33 |
agCurCfgTelnetServerPortThe TCP port number that the telnet server listens for telnet sessions.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.34 |
agNewCfgTelnetServerPortThe TCP port number that the telnet server listens for telnet sessions.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.35 |
agClearFlashDumpThis is an action object to clear the FLASH dump. ok(1) is returned when this object is read.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.36 |
agCurCfgNortelMultipleStgModeEnable or disable Nortel multiple STG mode.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.37 |
agNewCfgNortelMultipleStgModeEnable or disable Nortel multiple STG mode.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.38 |
agCurCfgTrapSrcIfThe SNMP trap source interface number.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.1.39 |
agNewCfgTrapSrcIfThe SNMP trap source interface number.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.1.40 |
agCurCfgARPMaxRateThe maximum allowed rate of MP-destined ARP packets.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.41 |
agNewCfgARPMaxRateThe maximum allowed rate of MP-destined ARP packets.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.42 |
agCurCfgICMPMaxRateThe maximum allowed rate of MP-destined ICMP packets.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.43 |
agNewCfgICMPMaxRateThe maximum allowed rate of MP-destined ICMP packets.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.44 |
agCurCfgTCPMaxRateThe maximum allowed rate of MP-destined TCP packets.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.45 |
agNewCfgTCPMaxRateThe maximum allowed rate of MP-destined TCP packets.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.46 |
agCurCfgUDPMaxRateThe maximum allowed rate of MP-destined UDP packets.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.47 |
agNewCfgUDPMaxRateThe maximum allowed rate of MP-destined UDP packets.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.48 |
agCurCfgHttpsServerPortThe TCP port number that the HTTPS server is listening to in the current_configuration block.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.49 |
agNewCfgHttpsServerPortThe TCP port number that the HTTPS server is listening to in the new_configuration block.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.50 |
agCurDaylightSavingsThe daylight savings location.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.55 |
agNewDaylightSavingsThe daylight savings location.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.56 |
agCurCfgIdleCLITimeoutSet idle CLI sessions timeout.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.57 |
agNewCfgIdleCLITimeoutSet idle CLI sessions timeout.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.58 |
agCurCfgXMLCfgServerPortThe TCP port number that the XML config server is listening to in the current_configuration block. If HTTPS is also enabled then the port numbers should be the samero INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.59 |
agNewCfgXMLCfgServerPortThe TCP port number that the XML config server is listening to in the new_configuration block. If HTTPS is also enabled then the port numbers should be the samerw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.1.60 |
agSymantecGlobalStateThis is an action object to globally enable or disable Symantec feature on the switch.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.1.61 |
agPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.2 |
agPortTableMaxEntThe maximum number of rows in the port configuration host table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.1 |
agPortCurCfgTableThe table of port configuration in the current_configuration block. SEQUENCE OF AgPortCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.1.1.2.2 |
agPortCurCfgTableEntryA row in the port table in the current_configuration block. AgPortCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.1.1.2.2.1 |
agPortCurCfgIndxThe index of the row in port configurations table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.1 |
agPortCurCfgStateThis is the state of the port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.2 |
agPortCurCfgVlanTagThis is VLAN tag state of the portro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.3 |
agPortCurCfgRmonThis object is used to turn RMON on or off on the port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.5 |
agPortCurCfgPVIDThe default VLAN ID for the port.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.6 |
agPortCurCfgFastEthAutoNegThis object is used to turn the autonegotiation on or off for fast Ethernet connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.7 |
agPortCurCfgFastEthSpeedSelects the port speed for fast Ethernet connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.8 |
agPortCurCfgFastEthModeThis object is used to select port mode for fast Ethernet connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.9 |
agPortCurCfgFastEthFctlSelects the port flow control for fast Ethernet connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.10 |
agPortCurCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.11 |
agPortCurCfgGigEthFctlThis object is used to select port flow control for gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.12 |
agPortCurCfgPortNameThe switch port name.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.13 |
agPortCurCfgBwmContractThe switch port Bandwidth Management contract number.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.14 |
agPortCurCfgDiscardNonIPsEnable or disable to discard all non-IP traffic on the switch port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.15 |
agPortCurCfgLinkTrapIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.16 |
agPortCurCfgPreferredThis object is used to set the preferred port. Valid only on dual ports.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.17 |
agPortCurCfgBackupThis object is used to set the backup port. Valid only on dual ports.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.18 |
agPortCurCfgEgressBWThe configured egress bandwidth limit for this port. This is the maximum egress bandwidth available to this port if BWM is on.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.19 |
agPortCurCfgNonIPBwmContractThe BWM contract for non-IP traffic.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.20 |
agPortCurCfgGigEthSpeedSelects the port speed for Gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.21 |
agPortCurCfgGigEthModeThis object is used to select port mode for Gigabit Ethernet connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.22 |
agPortCurCfgPortAliasThe switch port alias.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.2.2.1.24 |
agPortNewCfgTableThe table of port configuration in the new_configuration block. SEQUENCE OF AgPortNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.1.1.2.3 |
agPortNewCfgTableEntryA row in the port configuration table in the new_configuration block. AgPortNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.1.1.2.3.1 |
agPortNewCfgIndxThe index of the row in port configurations table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.1 |
agPortNewCfgStateThis is the state of the port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.2 |
agPortNewCfgVlanTagThis is VLAN tag state of the portrw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.3 |
agPortNewCfgRmonThis object is used to turn RMON on or off on the port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.5 |
agPortNewCfgPVIDThe default VLAN ID for the port.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.6 |
agPortNewCfgFastEthAutoNegThis object is used to turn the autonegotiation on or off for fast Ethernet connection.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.7 |
agPortNewCfgFastEthSpeedSelects the port speed for fast Ethernet connection.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.8 |
agPortNewCfgFastEthModeThis object is used to select port mode for fast Ethernet connection.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.9 |
agPortNewCfgFastEthFctlSelects the port flow control for fast Ethernet connection.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.10 |
agPortNewCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off for gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.11 |
agPortNewCfgGigEthFctlThis object is used to select port flow control for gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.12 |
agPortNewCfgPortNameThe switch port name.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.13 |
agPortNewCfgBwmContractThe switch port Bandwidth Management contract number.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.14 |
agPortNewCfgDiscardNonIPsEnable or disable to discard all non-IP traffic on the switch port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.15 |
agPortNewCfgLinkTrapIndicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.16 |
agPortNewCfgPreferredThis object is used to set the preferred port. Valid only on dual ports.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.17 |
agPortNewCfgBackupThis object is used to set the backup port. Valid only on dual ports.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.18 |
agPortNewCfgEgressBWThe configured egress bandwidth limit for this port. This is the maximum egress bandwidth available to this port if BWM is on.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.19 |
agPortNewCfgNonIPBwmContractThe BWM contract for non-IP trafficrw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.20 |
agPortNewCfgGigEthSpeedSelects the port speed for Gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.21 |
agPortNewCfgGigEthModeThis object is used to select port mode for Gigabit Ethernet connection.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.22 |
agPortNewCfgPortAliasThe switch port alias.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.2.3.1.24 |
agRadiusConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.3 |
radCurCfgPrimaryIpAddrThe IP address of the Primary RADIUS server.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.3.1 |
radNewCfgPrimaryIpAddrThe IP address of the Primary RADIUS server.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.3.2 |
radCurCfgSecondaryIpAddrThe IP address of the Secondary RADIUS server.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.3.3 |
radNewCfgSecondaryIpAddrThe IP address of the Secondary RADIUS server.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.3.4 |
radCurCfgPortSpecify the RADIUS port number.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.3.5 |
radNewCfgPortSpecify the RADIUS port number.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.3.6 |
radCurCfgTimeoutThe maximum number of seconds before resending authentication to RADIUS server.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.3.7 |
radNewCfgTimeoutThe maximum number of seconds before resending authentication to RADIUS server.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.3.8 |
radCurCfgRetriesNumber of retries to the RADIUS server.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.3.9 |
radNewCfgRetriesNumber of retries to the RADIUS server.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.3.10 |
radCurCfgStateEnable or disbale RADIUS authentication.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.3.11 |
radNewCfgStateEnable or disable RADIUS authentication.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.3.12 |
radCurCfgAuthenStringThe RADIUS authentication string.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.3.13 |
radNewCfgAuthenStringThe RADIUS authentication string.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.3.14 |
radCurCfgTelnetEnable or disbale RADIUS backdoor for telnet.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.3.15 |
radNewCfgTelnetEnable or disable RADIUS backdoor for telnet.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.3.16 |
radCurCfgAuthenSecondStringThe second RADIUS authentication string.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.3.17 |
radNewCfgAuthenSecondStringThe second RADIUS authentication string.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.3.18 |
agNTP OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.4 |
agCurCfgNTPServerThe NTP Server Address.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.4.1 |
agNewCfgNTPServerThe NTP Server Address.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.4.2 |
agCurCfgNTPResyncIntervalThe NTP Server resync interval in minutes.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.4.3 |
agNewCfgNTPResyncIntervalThe NTP Server resync interval in minutes.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.4.4 |
agCurCfgNTPTzoneHHMMThe NTP Server timezone offset from GMT formatted as (+/-)HH:MM.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.4.5 |
agNewCfgNTPTzoneHHMMThe NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.4.6 |
agCurCfgNTPDlightEnable/disable daylight savings time.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.4.7 |
agNewCfgNTPDlightEnable/disable daylight savings time.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.4.8 |
agCurCfgNTPServiceEnable/disable NTP Service.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.4.9 |
agNewCfgNTPServiceEnable/disable NTP Service.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.4.10 |
agCurCfgNTPSecServerThe Secondary NTP Server Address.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.4.11 |
agNewCfgNTPSecServerThe Secondary NTP Server Address.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.4.12 |
agSyslog OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.5 |
agCurCfgSyslogHostThe syslog host IP address, as currently configured in the current_configuration block.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.5.1 |
agNewCfgSyslogHostThe syslog host IP address, in the new_configuration block.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.5.2 |
agCurCfgSyslog2HostThe second syslog host IP address, as currently configured in the current_configuration block.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.5.3 |
agNewCfgSyslog2HostThe second syslog host IP address, in the new_configuration block.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.5.4 |
agCurCfgSyslogFacThe facility of syslog host in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.5 |
agNewCfgSyslogFacThe facility of syslog host in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.6 |
agCurCfgSyslog2FacThe facility of syslog2 host in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.7 |
agNewCfgSyslog2FacThe facility of syslogs host in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.8 |
agClrSyslogMsgsClears all current Syslog messages.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.9 |
agSyslogMsgTableMaxSizeThe maximum number of rows in the syslog message table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.5.10 |
agSyslogMsgTableThe table of syslog messages. SEQUENCE OF AgSyslogMsgTableEntry .1.3.6.1.4.1.1872.2.5.1.1.5.11 |
agSyslogMsgTableEntryA syslog message stored on the switch. AgSyslogMsgTableEntry .1.3.6.1.4.1.1872.2.5.1.1.5.11.1 |
agSyslogMsgIndexThe syslog message table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.5.11.1.1 |
agSyslogMessageThe syslog message.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.5.11.1.2 |
agLog OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.5.12 |
agNewCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.1 |
agCurCfgSyslogTrapConsoleEnable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.2 |
agNewCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.3 |
agCurCfgSyslogTrapSystemEnable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.4 |
agNewCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.5 |
agCurCfgSyslogTrapMgmtEnable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.6 |
agNewCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.7 |
agCurCfgSyslogTrapCliEnable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.8 |
agNewCfgSyslogTrapStpEnable or disable spanning tree syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.9 |
agCurCfgSyslogTrapStpEnable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.10 |
agNewCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.11 |
agCurCfgSyslogTrapVlanEnable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.12 |
agNewCfgSyslogTrapSlbEnable or disable SLB syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.13 |
agCurCfgSyslogTrapSlbEnable or disable SLB syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.14 |
agNewCfgSyslogTrapGslbEnable or disable GSLB syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.15 |
agCurCfgSyslogTrapGslbEnable or disable GSLB syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.16 |
agNewCfgSyslogTrapFilterEnable or disable filter syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.17 |
agCurCfgSyslogTrapFilterEnable or disable filter syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.18 |
agNewCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.19 |
agCurCfgSyslogTrapSshEnable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.20 |
agNewCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.21 |
agCurCfgSyslogTrapVrrpEnable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.22 |
agNewCfgSyslogTrapBgpEnable or disable BGP syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.23 |
agCurCfgSyslogTrapBgpEnable or disable BGP syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.24 |
agNewCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.25 |
agCurCfgSyslogTrapNtpEnable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.26 |
agNewCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.31 |
agCurCfgSyslogTrapIpEnable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.32 |
agNewCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.35 |
agCurCfgSyslogTrapWebEnable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.36 |
agNewCfgSyslogTrapSynAtkEnable or disable SYN attack detection related syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.37 |
agCurCfgSyslogTrapSynAtkEnable or disable SYN attack detection related syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.38 |
agNewCfgSyslogTrapTcpLimEnable or disable TCP rate limiting related syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.39 |
agCurCfgSyslogTrapTcpLimEnable or disable TCP rate limiting related syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.40 |
agNewCfgSyslogTrapOspfEnable or disable OSPF related syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.41 |
agCurCfgSyslogTrapOspfEnable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.42 |
agNewCfgSyslogTrapSecurityEnable or disable Security pack related syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.43 |
agCurCfgSyslogTrapSecurityEnable or disable Security pack related syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.44 |
agNewCfgSyslogTrapRmonEnable or disable rmon related syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.45 |
agCurCfgSyslogTrapRmonEnable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.46 |
agNewCfgSyslogTrapSlbAtkEnable or disable SLB ATK related syslog and SNMP trap, in the new_configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.47 |
agCurCfgSyslogTrapSlbAtkEnable or disable SLB ATK related syslog and SNMP trap, as currently configured in the current_configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.12.48 |
agCurCfgSyslogSevThe severity of syslog host in the current configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.13 |
agNewCfgSyslogSevThe severity of syslog host in the new configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.14 |
agCurCfgSyslog2SevThe severity of syslog2 host in the current configuration block.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.15 |
agNewCfgSyslog2SevThe severity of syslogs host in the new configuration block.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.5.16 |
agTrapHost OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.6 |
agTrapHostTableMaxEntThe maximum number of rows in the trap host table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.6.1 |
agCurCfgTrapHostTableThe table of trap hosts which to send SNMP traps in the current_configuration block. SEQUENCE OF AgCurCfgTrapHostEntry .1.3.6.1.4.1.1872.2.5.1.1.6.2 |
agCurCfgTrapHostEntryA row in the trap host table in the current_configuration block. AgCurCfgTrapHostEntry .1.3.6.1.4.1.1872.2.5.1.1.6.2.1 |
agCurCfgTrapHostIndxThe index of the row in trap host table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.6.2.1.1 |
agCurCfgTrapHostIpAddrThe IP address of a trap host.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.6.2.1.2 |
agCurCfgTrapHostCommStringThe SNMP community string to use with the trap hostro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.6.2.1.3 |
agNewCfgTrapHostTableThe table of trap hosts which to send SNMP traps in the new_configuration block. SEQUENCE OF AgNewCfgTrapHostEntry .1.3.6.1.4.1.1872.2.5.1.1.6.3 |
agNewCfgTrapHostEntryA row in the trap host table in the new_configuration block. AgNewCfgTrapHostEntry .1.3.6.1.4.1.1872.2.5.1.1.6.3.1 |
agNewCfgTrapHostIndxThe index of the row in trap host table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.6.3.1.1 |
agNewCfgTrapHostIpAddrThe IP address of a trap host.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.6.3.1.2 |
agNewCfgTrapHostCommStringThe SNMP community string to use with the trap hostrw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.6.3.1.3 |
agTftp OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.7 |
agTftpServerThe TFTP server IP address or domain name.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.7.1 |
agTftpImageWhether the image file should be loaded in image1 or image2 in flash.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.7.2 |
agTftpImageFileNameThe image file name to be downloaded.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.7.3 |
agTftpCfgFileNameThe configuration file name.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.7.4 |
agTftpDumpFileNameThe file name for core dump.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.7.5 |
agTftpActionThis is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5) - Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. bkpdump-put(6)- Download switch backup core dump to a specified file (agTftpDumpFileName) on the TFTP server. img-put(7) - Upload specified switch image to a specified image file (agTftpImageFileName) on the TFTP server. tsdump-put(8) - Download switch tech support dump to a specified file (agTftpTSDumpFileName) on the TFTP server. bogon-get(9) - Download bogon config file from a specified bogon file (uses agTftpImageFileName) on the TFTP server. other(1) is returned always when read.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.7.6 |
agTftpLastActionStatusThe recorded status of the previous TFTP activity.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.7.7 |
agTftpPortSpecify whether the TFTP operation should nbe performed over the data port or the management port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.7.8 |
agTftpUserNameThe username for FTP server or blank for TFTP server.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.7.9 |
agTftpPasswordThe password for FTP server.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.7.10 |
agTftpTSDumpFileNameThe file name for TS dump.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.7.11 |
agApply OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.8 |
agApplyPendingThis object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.8.1 |
agApplyConfigWhen this object is read the current state is returned. idle(2) indicates that there is no apply in progess. complete(4) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable. Once the operation is completed or the agApplyTable is read in case of failure, the apply buffer needs to be freed and the agApplyState should be set back to 'idle' state so others can issue the apply command via SNMP.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.8.2 |
agApplyTableSizeThe number of strings in the apply table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.8.4 |
agApplyTableThe table of URL path for URL load balancing in the current_config. SEQUENCE OF AgApplyTableEntry .1.3.6.1.4.1.1872.2.5.1.1.8.5 |
agApplyTableEntryInformation about an URL path for URL load balancing. AgApplyTableEntry .1.3.6.1.4.1.1872.2.5.1.1.8.5.1 |
agApplyIndexThe table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.8.5.1.1 |
agApplyStringA string in the apply table.ro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.1.8.5.1.2 |
agMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.9 |
agMgmtCurCfgIpAddrThe IP address of the management port.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.9.1 |
agMgmtNewCfgIpAddrThe IP address of the management port.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.9.2 |
agMgmtCurCfgMaskThe subnet mask of the management port.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.9.3 |
agMgmtNewCfgMaskThe subnet mask of the management port.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.9.4 |
agMgmtCurCfgGatewayThe default gateway for the management port.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.9.7 |
agMgmtNewCfgGatewayThe default gateway for the management port.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.9.8 |
agMgmtCurCfgStateEnable/disable management port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.9 |
agMgmtNewCfgStateEnable/disable management port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.10 |
agMgmtCurCfgNtpSpecifies NTP access is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.11 |
agMgmtNewCfgNtpSpecifies NTP access is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.12 |
agMgmtCurCfgRadiusSpecifies RADIUS server access is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.13 |
agMgmtNewCfgRadiusSpecifies RADIUS server access is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.14 |
agMgmtCurCfgSmtpSpecifies SMTP access is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.15 |
agMgmtNewCfgSmtpSpecifies SMTP access is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.16 |
agMgmtCurCfgSnmpSpecifies SNMP trap host access is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.17 |
agMgmtNewCfgSnmpSpecifies SNMP trap host access is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.18 |
agMgmtCurCfgSyslogSpecifies syslog host access is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.19 |
agMgmtNewCfgSyslogSpecifies syslog host access is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.20 |
agMgmtCurCfgTftpSpecifies TFTP access is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.21 |
agMgmtNewCfgTftpSpecifies TFTP access is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.22 |
agMgmtPort OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.9.23 |
agMgmtPortCurCfgSpeedSet Management port link speed.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.23.1 |
agMgmtPortNewCfgSpeedSet Management port link speed.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.23.2 |
agMgmtPortCurCfgModeSet Management port full or half duplex mode.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.23.3 |
agMgmtPortNewCfgModeSet Management port full or half duplex mode.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.23.4 |
agMgmtPortCurCfgAutoSet Management port autonegotiation.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.23.5 |
agMgmtPortNewCfgAutoSet Management port autonegotiation.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.23.6 |
agMgmtCurCfgDnsSpecifies DNS access is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.24 |
agMgmtNewCfgDnsSpecifies DNS access is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.25 |
agMgmtCurCfgTacacsSpecifies TACACS+ server access is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.26 |
agMgmtNewCfgTacacsSpecifies TACACS+ server access is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.27 |
agMgmtCurCfgIntrThe management port gateway health check interval (in seconds).ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.9.28 |
agMgmtNewCfgIntrThe management port gateway health check interval (in seconds).rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.9.29 |
agMgmtCurCfgRetryThe management port gateway retries before out of service.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.9.30 |
agMgmtNewCfgRetryThe management port gateway retries before out of service.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.9.31 |
agMgmtCurCfgSonmpSpecifies whether to use management port IP address or interface IP address in the SONMP Hello packets.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.32 |
agMgmtNewCfgSonmpSpecifies whether to use management port IP address or interface IP address in the SONMP Hello packets.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.33 |
agMgmtCurCfgWlmSpecifies WLM SASP is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.34 |
agMgmtNewCfgWlmSpecifies WLM SASP is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.35 |
agMgmtCurCfgReportSpecifies reporting server is over management port or data port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.36 |
agMgmtNewCfgReportSpecifies reporting server is over management port or data port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.9.37 |
agSslproc OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.10 |
agSslprocCurCfgIpAddrThe SSL cluster management IP.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.10.1 |
agSslprocNewCfgIpAddrThe SSL cluster management IP.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.10.2 |
agSslprocCurCfgPortThe SSL cluster management port.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.10.3 |
agSslprocNewCfgPortThe SSL cluster management port.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.10.4 |
agSslprocCurCfgRtsEnable/disable RTS processing.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.10.5 |
agSslprocNewCfgRtsEnabled/disable RTS processing.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.10.6 |
agSslprocCurCfgFiltEnable/disable filtering.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.10.7 |
agSslprocNewCfgFiltEnabled/disable filtering.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.10.8 |
agTacacsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.11 |
tacCurCfgPrimaryIpAddrThe IP address of the Primary TACACS+ server.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.11.1 |
tacNewCfgPrimaryIpAddrThe IP address of the Primary TACACS+ server.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.11.2 |
tacCurCfgSecondaryIpAddrThe IP address of the Secondary TACSACS server.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.11.3 |
tacNewCfgSecondaryIpAddrThe IP address of the Secondary TACACS+ server.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.11.4 |
tacCurCfgPortSpecify the TACACS+ port number.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.11.5 |
tacNewCfgPortSpecify the TACACS+ port number.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.11.6 |
tacCurCfgTimeoutThe maximum number of seconds before resending authentication to TACACS+ server.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.11.7 |
tacNewCfgTimeoutThe maximum number of seconds before resending authentication to TACACS+ server.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.11.8 |
tacCurCfgRetriesNumber of retries to the TACACS+ server.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.11.9 |
tacNewCfgRetriesNumber of retries to the TACACS+ server.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.11.10 |
tacCurCfgStateEnable or disbale TACACS+ authentication.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.11.11 |
tacNewCfgStateEnable or disable TACACS+ authentication.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.11.12 |
tacCurCfgAuthenStringThe TACACS+ authentication string.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.11.13 |
tacNewCfgAuthenStringThe TACACS+ authentication string.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.11.14 |
tacCurCfgTelnetEnable or disbale TACACS+ backdoor for telnet.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.11.15 |
tacNewCfgTelnetEnable or disable TACACS+ backdoor for telnet.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.11.16 |
tacCurCfgAuthenSecondStringThe second TACACS+ authentication string.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.11.17 |
tacNewCfgAuthenSecondStringThe second TACACS+ authentication string.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.11.18 |
tacCurCfgCmapEnable/Disable Tacacs+ new prividlege level maping.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.11.25 |
tacNewCfgCmapEnable/Disable Tacacs+ new prividlege level maping.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.11.26 |
agMgmtNetConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.12 |
agMgmtNetTableMaxSizeThe maximum number of entries in the Management Network Table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.12.1 |
agCurCfgMgmtNetTableThe table for Management Network definitions in the current configuration block. SEQUENCE OF AgCurCfgMgmtNetEntry .1.3.6.1.4.1.1872.2.5.1.1.12.2 |
agCurCfgMgmtNetEntryA row in the management network definition table. AgCurCfgMgmtNetEntry .1.3.6.1.4.1.1872.2.5.1.1.12.2.1 |
agCurCfgMgmtNetIndexThe index of the Management Network Definition table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.12.2.1.1 |
agCurCfgMgmtNetSubnetThe Management Network Address in the current_configuration block.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.12.2.1.2 |
agCurCfgMgmtNetMaskThe Management Network Mask in the current_configuration block.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.12.2.1.3 |
agNewCfgMgmtNetTableThe table for Management Network definitions in the new configuration block. SEQUENCE OF AgNewCfgMgmtNetEntry .1.3.6.1.4.1.1872.2.5.1.1.12.3 |
agNewCfgMgmtNetEntryA row in the management network definition table. AgNewCfgMgmtNetEntry .1.3.6.1.4.1.1872.2.5.1.1.12.3.1 |
agNewCfgMgmtNetIndexThe index of the Management Network Definition table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.12.3.1.1 |
agNewCfgMgmtNetSubnetThe Management Network Address in the new_configuration block.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.12.3.1.2 |
agNewCfgMgmtNetMaskThe Management Network Mask in the new_configuration block.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.12.3.1.3 |
agNewCfgMgmtNetDeleteBy setting the value to delete(2), the entire row is deleted.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.12.3.1.4 |
agBoot OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.13 |
agCfgBootWeekdayThe day of the week for reboot.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.13.1 |
agCfgBootHourThe hour in 24-hour format for reboot.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.13.2 |
agCfgBootMinThe minutes [00] for reboot.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.13.3 |
agCfgBootResetCancel pending switch reset.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.13.4 |
agCfgBootNxtResetTimeDisplay the next scheduled reboot time.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.13.5 |
agSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.14 |
agPgroup OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.14.1 |
agPgrpMatchTableMaxSizeThe maximum number of entries in the Pattern Match Group Table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.1.1 |
agCurCfgPgrpMatchTableThe table for Pattern Match Group definitions in the current configuration block. SEQUENCE OF AgCurCfgPgrpMatchEntry .1.3.6.1.4.1.1872.2.5.1.1.14.1.2 |
agCurCfgPgrpMatchEntryA row in the Pattern Match Group table. AgCurCfgPgrpMatchEntry .1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1 |
agCurCfgPgrpMatchIndexThe index of the Pattern Match Group Definition table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.1 |
agCurCfgPgrpNameThe name for the Pattern Match Group.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.2 |
agCurCfgPgrpMatchBmapThe pattern matching rules applied to the port. The pattern rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ string 9 || || || ||___ string 8 || |____ string 7 || . . . ||_________ string 2 |__________ string 1 (as index to slbCurCfgUrlLbPathTable) where x : 1 - The represented string matching rule applied 0 - The represented string matching rule appliedro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.1.14.1.2.1.3 |
agNewCfgPgrpMatchTableThe table for Pattern Match Group definitions in the new configuration block. SEQUENCE OF AgNewCfgPgrpMatchEntry .1.3.6.1.4.1.1872.2.5.1.1.14.1.3 |
agNewCfgPgrpMatchEntryA row in the Pattern Match Group definition table. AgNewCfgPgrpMatchEntry .1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1 |
agNewCfgPgrpMatchIndexThe index of the Pattern Match Group Definition table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.1 |
agNewCfgPgrpNameThe name for the Pattern Match Group.rw DisplayString .1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.2 |
agNewCfgPgrpMatchAddThe Pattern Match Group String added in the new_configuration block.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.3 |
agNewCfgPgrpMatchRemThe Pattern Match Group String removed in the new_configuration block.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.4 |
agNewCfgPgrpMatchBmapThe pattern matching rules applied to the port. The pattern rules are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ string 9 || || || ||___ string 8 || |____ string 7 || . . . ||_________ string 2 |__________ string 1 (as index to slbCurCfgUrlLbPathTable) where x : 1 - The represented string matching rule applied 0 - The represented string matching rule appliedro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.5 |
agNewCfgPgrpDeleteBy setting the value to delete(2), the entire row is deleted.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.1.3.1.6 |
agCfgSecurityPortTableThe table of Security related features enabled/disabled for this port. SEQUENCE OF AgCfgSecurityPortTableEntry .1.3.6.1.4.1.1872.2.5.1.1.14.2 |
agCfgSecurityPortTableEntryA row in the Security related in the current configuration block. AgCfgSecurityPortTableEntry .1.3.6.1.4.1.1872.2.5.1.1.14.2.1 |
agCfgSecurityPortIndxThe port index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.1 |
agCurCfgSecurityDosStateEnable/Disable DOS attack per port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.2 |
agNewCfgSecurityDosStateEnable/Disable DOS attack per port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.3 |
agCurCfgSecurityIpAclStateEnable/Disable IP ACL per port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.4 |
agNewCfgSecurityIpAclStateEnable/Disable IP ACL per port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.5 |
agCurCfgSecurityUbStateEnable/Disable UDP Blast per port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.6 |
agNewCfgSecurityUbStateEnable/Disable UDP Blast per port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.7 |
agCurCfgSecurityBogonStateEnable/Disable Bogon IP ACL per port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.8 |
agNewCfgSecurityBogonStateEnable/Disable Bogon IP ACL per port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.9 |
agCurCfgSecurityAttacksBmapThe DoS Attacks added/removed for this port. The selected DoS Attacks are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_______ 9 || || || ||_________ 8 || |__________ 7 || . . . ||________________ 2 |________________ 1 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version where x : 1 - The represented DoS Attack is enabled 0 - The represented DoS Attack is disabledro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.10 |
agNewCfgSecurityAttacksBmapThe DoS Attacks added/removed for this port. The selected DoS Attacks are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |______ 9 || || || ||________ 8 || |_________ 7 || . . . ||_______________ 2 |________________ 1 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version where x : 1 - The represented DoS Attack is enabled 0 - The represented DoS Attack is disabledro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.11 |
agNewCfgSecurityAddAttackThis is an action object to add a DoS Attack to a port. The value specified with this object is number given in this description. 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version When read, the value '0' is returned always.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.12 |
agNewCfgSecurityRemAttackThis is an action object to remove a DoS attack for a port. The value specified with this object is number given in this description. 1 - IPLen 2 - IPVersion 3 - Broadcast 4 - Loopback 5 - Land 6 - IPReserved 7 - IPTTL 8 - IPProt 9 - IPOptLen 10 - FragMoreDont 11 - FragData 12 - FragBoundary 13 - FragLast 14 - FragDontOff 15 - FragOpt 16 - FragOff 17 - FragOversize 18 - TCPLen 19 - TCPPortZero 20 - BlatAttack 21 - TCPReserved 22 - NullScanAttack 23 - FullXmasScan 24 - FinScan 25 - VecnaScan 26 - XmasScanAttack 27 - SynFinScan 28 - FlagAbnormal 29 - SYNData 30 - SYNFrag 31 - FTPPort 32 - DNSPort 33 - SeqZero 34 - AckZero 35 - TCPOptLen 36 - UDPLen 37 - UDPPortZero 38 - FraggleAttack 39 - Pepsi 40 - Rc8 41 - SNMPNull 42 - ICMPLen 43 - SmurfAttack 44 - ICMPData 45 - ICMPOff 46 - ICMPType 47 - IGMPLen 48 - IGMPFrag 49 - IGMPType 50 - ARPLen 51 - ARPNbCast 52 - ARPNuCast 53 - ARPSpoof 54 - GARP 55 - IP6Len 56 - IP6Version When read, the value '0' is returned always.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.13 |
agNewCfgSecurityDoSAttacksAdd all DoS attacks to the port by setting the value to '2'. Remove all DoS attacks from the port by setting the value to '3'. Do nothing by setting the value to '1'. When read, the value '0' is returned always.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.14 |
agCurCfgSecuritySymantecStateEnable/Disable Symantec IPS Processing per port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.15 |
agNewCfgSecuritySymantecStateEnable/Disable Symantec IPS Processing per port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.2.1.16 |
ipAclCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.14.3 |
ipAclTableMaxSizeThe maximum number of rows in the IP ACL table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.3.1 |
ipAclCurCfgTableThe table of IP ACL in the current configuration block. SEQUENCE OF IpAclCurCfgEntry .1.3.6.1.4.1.1872.2.5.1.1.14.3.2 |
ipAclCurCfgEntryA row in the IP ACL table IpAclCurCfgEntry .1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1 |
ipAclCurCfgIndxThe index of the IP ACL table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.1 |
ipAclCurCfgIpThe IP address of the entry.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.2 |
ipAclCurCfgMaskThe IP address Mask of the entry.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.14.3.2.1.3 |
ipAclNewCfgTableThe table of IP ACL in the new configuration block. SEQUENCE OF IpAclNewCfgEntry .1.3.6.1.4.1.1872.2.5.1.1.14.3.3 |
ipAclNewCfgEntryA row in the IP ACL table IpAclNewCfgEntry .1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1 |
ipAclNewCfgIndxThe index of the IP ACL table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.1 |
ipAclNewCfgIpThe IP address of the entry.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.2 |
ipAclNewCfgActionWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.3 |
ipAclNewCfgMaskThe IP address Mask of the entry.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.14.3.3.1.4 |
udpBlastCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.14.4 |
udpBlastudpPortTableMaxSizeThe maximum number of rows in the UDP Blast Port table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.4.1 |
udpBlastCurCfgudpPortPacketLimitThe default packet limit in the current configuration block.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.4.2 |
udpBlastCurCfgudpPortTableThe UDP Blast port table in the current configuration block. SEQUENCE OF UdpBlastCurCfgudpPortEntry .1.3.6.1.4.1.1872.2.5.1.1.14.4.3 |
udpBlastCurCfgudpPortEntryA row in the UDP Blast UDP Port table UdpBlastCurCfgudpPortEntry .1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1 |
udpBlastCurCfgudpPortLowIndxThe low UDP port number of UDP port range in the UDP Port table.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.1 |
udpBlastCurCfgudpPortHighIndxThe high UDP port number of UDP port range in the UDP Port table. If highIndx and lowIndx are set to the same, it is considered a single port instead of rangero INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.2 |
udpBlastCurCfgudpPortEntryPacketLimitThe Packet Limit of the UDP Port Entry.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.4.3.1.3 |
udpBlastNewCfgudpPortPacketLimitThe default packet limit in the new configuration block.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.4.4 |
udpBlastNewCfgudpPortTableThe UDP Blast table in the new configuration block. SEQUENCE OF UdpBlastNewCfgudpPortEntry .1.3.6.1.4.1.1872.2.5.1.1.14.4.5 |
udpBlastNewCfgudpPortEntryA row in the UDP Blast UDP Port table UdpBlastNewCfgudpPortEntry .1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1 |
udpBlastNewCfgudpPortLowIndxThe low UDP port number of UDP port range in the UDP Port table. The difference between the minimum of all the low UDP port number specified and the maximum of all the high UDP port number specified can't exceed 5000.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.1 |
udpBlastNewCfgudpPortHighIndxThe high UDP port number of UDP port range in the UDP Port table. The difference between the minimum of all the low UDP port number specified and the maximum of all the high UDP port number specified can't exceed 5000. If highIndx and lowIndx are set to the same, it is considered a single port instead of range.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.2 |
udpBlastNewCfgudpPortEntryDeleteThis deletes the UDP port entry from lowIndx to highIndx.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.3 |
udpBlastNewCfgudpPortEntryPacketLimitThe Packet Limit of the UDP Port Entry.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.4.5.1.4 |
secGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.14.5 |
secCurCfgSecurityLogThresholdThe rate threshold for security logging in packets/sec. Rate zero indicates no rate threshold.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.5.1 |
secNewCfgSecurityLogThresholdThe rate threshold for security logging in packets/sec. Rate zero indicates no rate threshold.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.5.2 |
secCurCfgPacketDepthDepth of match for pattern matching, in units of packets. A value of 0 means match all packets in the stream.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.5.5 |
secNewCfgPacketDepthDepth of match for pattern matching, in units of packets. A value of 0 means match all packets in the stream.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.5.6 |
secCurCfgIpAclSyslogThresholdDisplay syslog when threshold number of ACL's have been hit.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.5.7 |
secNewCfgIpAclSyslogThresholdDisplay syslog when threshold number of ACL's have been hit.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.5.8 |
secCurCfgIpAclSyslogTimeDisplay syslog after specified number of minutes have passed.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.5.9 |
secNewCfgIpAclSyslogTimeDisplay syslog after specified number of minutes have passed.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.5.10 |
dosAttackPrevCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.14.6 |
dosCurCfgIPTTLThe smallest allowable IP ttl.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.1 |
dosNewCfgIPTTLThe smallest allowable IP ttl.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.2 |
dosCurCfgIPProtThe highest allowable IP protocol.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.3 |
dosNewCfgIPProtThe highest allowable IP protocol.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.4 |
dosCurCfgFragdataThe smallest allowable IP fragment payload.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.5 |
dosNewCfgFragdataThe smallest allowable IP fragment payload.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.6 |
dosCurCfgFragoffThe smallest allowable IP fragment offset.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.7 |
dosNewCfgFragoffThe smallest allowable IP fragment offset.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.8 |
dosCurCfgSYNdataThe largest allowable TCP SYN payload.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.9 |
dosNewCfgSYNdataThe largest allowable TCP SYN payload.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.10 |
dosCurCfgICMPdataThe largest allowable ICMP payload.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.11 |
dosNewCfgICMPdataThe largest allowable ICMP payload.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.12 |
dosCurCfgICMPoffThe largest allowable ICMP fragment offset.ro INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.13 |
dosNewCfgICMPoffThe largest allowable ICMP fragment offset.rw INTEGER .1.3.6.1.4.1.1872.2.5.1.1.14.6.14 |
ipDstAclCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.14.7 |
ipDstAclTableMaxSizeThe maximum number of rows in the DST IP ACL table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.7.1 |
ipDstAclCurCfgTableThe table of DST IP ACL in the current configuration block. SEQUENCE OF IpDstAclCurCfgEntry .1.3.6.1.4.1.1872.2.5.1.1.14.7.2 |
ipDstAclCurCfgEntryA row in the DST IP ACL table IpDstAclCurCfgEntry .1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1 |
ipDstAclCurCfgIndxThe index of the DST IP ACL table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.1 |
ipDstAclCurCfgIpThe IP address of the entry.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.2 |
ipDstAclCurCfgMaskThe IP address Mask of the entry.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.1.14.7.2.1.3 |
ipDstAclNewCfgTableThe table of DST IP ACL in the new configuration block. SEQUENCE OF IpDstAclNewCfgEntry .1.3.6.1.4.1.1872.2.5.1.1.14.7.3 |
ipDstAclNewCfgEntryA row in the DST IP ACL table IpDstAclNewCfgEntry .1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1 |
ipDstAclNewCfgIndxThe index of the DST IP ACL table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.1 |
ipDstAclNewCfgIpThe IP address of the entry.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.2 |
ipDstAclNewCfgActionWhen set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.3 |
ipDstAclNewCfgMaskThe IP address Mask of the entry.rw IpAddress .1.3.6.1.4.1.1872.2.5.1.1.14.7.3.1.4 |
symantecCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.14.8 |
symSigBwmMappingTableMaxSizeThe maximum number of entries in the Symantec Signature ID- BWM contract-Policy Mapping Table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.1 |
symCurCfgSigBwmMappingTableThe Symantec Signature ID-BWM Contract-Policy Mapping table. SEQUENCE OF SymCurCfgSigBwmMappingTableEntry .1.3.6.1.4.1.1872.2.5.1.1.14.8.2 |
symCurCfgSigBwmMappingTableEntryA row in the Symantec Signature ID-BWM Contract-Policy Mapping table. SymCurCfgSigBwmMappingTableEntry .1.3.6.1.4.1.1872.2.5.1.1.14.8.2.1 |
symCurCfgTblIndexThe Table Index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.2.1.1 |
symCurCfgSignatureIDThe Symantec Signature ID.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.2.1.2 |
symCurCfgInContractIDThe BWM In-Contrat ID associated with the Signature ID.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.2.1.3 |
symCurCfgOutContractIDThe BWM Out-Contrat ID associated with the Signature ID.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.2.1.4 |
symNewCfgSigBwmMappingTableThe Symantec Signature ID-BWM Contract-Policy Mapping table. SEQUENCE OF SymNewCfgSigBwmMappingTableEntry .1.3.6.1.4.1.1872.2.5.1.1.14.8.3 |
symNewCfgSigBwmMappingTableEntryA row in the Symantec Signature ID-BWM Contract-Policy Mapping table. SymNewCfgSigBwmMappingTableEntry .1.3.6.1.4.1.1872.2.5.1.1.14.8.3.1 |
symNewCfgTblIndexThe Table Index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.3.1.1 |
symNewCfgSignatureIDThe Symantec Signature ID.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.3.1.2 |
symNewCfgInContractIDThe BWM In-Contrat ID associated with the Signature ID.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.3.1.3 |
symNewCfgOutContractIDThe BWM Out-Contrat ID associated with the Signature ID.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.3.1.4 |
symNewCfgDeleteEntryDelete an table entry.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.8.3.1.5 |
symNewCfgDefaultActionThe default action to be taken during LiveUpdate.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.8.4 |
symCurCfgDefaultActionThe default action to be taken during LiveUpdate.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.14.8.5 |
symSigFileVersionSeqNumberSymantec Signature File version sequence.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.14.8.6 |
agSonmp OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.15 |
agCurCfgSonmpSrcIfThe IP address used in the SONMP hello packets. The switch should be reachable via SNMP at this IP address.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.15.1 |
agNewCfgSonmpSrcIfThe IP address used in the SONMP hello packets. The switch should be reachable via SNMP at this IP address.rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.15.2 |
agPortAccessCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.16 |
agPortAccessTableMaxSizeThe maximum number of entries in Port Access Table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.16.1 |
agCurCfgPortAccessTableThe table of ports and their access states SEQUENCE OF AgCurCfgPortAccessEntry .1.3.6.1.4.1.1872.2.5.1.1.16.2 |
agCurCfgPortAccessEntryA row in the port access table AgCurCfgPortAccessEntry .1.3.6.1.4.1.1872.2.5.1.1.16.2.1 |
agCurCfgPortAccessIndexThe port number in the table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.16.2.1.1 |
agCurCfgPortAccessStateThe port access state of the port. deny(0) - port does not have management access allow(1) - port has management accessro Enumeration .1.3.6.1.4.1.1872.2.5.1.1.16.2.1.2 |
agNewCfgPortAccessTableThe table of ports and their access states SEQUENCE OF AgNewCfgPortAccessEntry .1.3.6.1.4.1.1872.2.5.1.1.16.3 |
agNewCfgPortAccessEntryA row in the port access table. AgNewCfgPortAccessEntry .1.3.6.1.4.1.1872.2.5.1.1.16.3.1 |
agNewCfgPortAccessIndexThe port number in the table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.16.3.1.1 |
agNewCfgPortAccessStateThe port access state of the port. deny(0) - port does not have management access allow(1) - port has management accessrw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.16.3.1.2 |
agSave OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.17 |
agSaveConfigWhen this object is read the current state is returned. idle(2) indicates that there is no save in progess. complete(4) indicates that the last save operation is completed. Setting the value to save(1), will write the current config block since the last save to the flash memory with backup, for saving without backup saveNoBackup(6) can be used. If the save is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agSaveTable. Once the operation is completed or the agSaveTable is read , the save buffer needs to be freed and the agSaveState should be set back to 'idle' state so others can issue the save command via SNMP.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.17.1 |
agSaveTableSizeThe number of strings in the save table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.17.2 |
agSaveTableThe table of error messages for asynchrnous save operation. SEQUENCE OF AgSaveTableEntry .1.3.6.1.4.1.1872.2.5.1.1.17.3 |
agSaveTableEntryError Strings generated while asynchronous save operation. AgSaveTableEntry .1.3.6.1.4.1.1872.2.5.1.1.17.3.1 |
agSaveIndexThe table index for save.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.17.3.1.1 |
agSaveStringA string in the Save table.ro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.1.17.3.1.2 |
agFileTransfer OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.1.18 |
agFileSizeThis is the number of octets in the file. This is set to indicate the total size of the file that is being transfered. The value is set in bytes. File size range for Bogon File Transfer 1 - 2097152 and for Symantec Signature 1 - 178176rw Integer32 .1.3.6.1.4.1.1872.2.5.1.1.18.1 |
agFileTransferStateWhen this object is read the current state is returned. idle(1) indicates that there is no transfer in progess. Any user must verify the state machine is in state idle before setting the state to transfer(2).Before setting transfer(2) state agFileSize and agFileType should be set and then transition changes to inprogress(3). While in this state, the agFileTable should be populated with all the rows needed to transfer the files entire contents. endoftransfer(7) should be set inorder to notify the agent that contents are transfered. If all the contents are received, then the state transitions to complete(5). If there are any missing rows, the agent will transition to the state missingrows(4). The user must either populate the missing rows, and give a endoftransfer(7) state, or give up the transfer by setting the state to idle(1). When the idle(1) state is set, the string with missing rows is cleared and the buffer is written to the file, state goes complete(5) to upon successful completion. Any transition to idle(1) will free any resources associated with the file transfer, that are no longer needed. The agFileTable will contain 0 rows. While in state missingrows(4), agFileTableMissingRows will contain a parseable string of missing row indexes seperated by a comma.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.18.2 |
agFileTableMissingRowsA string representing the missing rows of data for the file transfer. This is only valid while agFileTransferState is in the missingrows(4) state. The string will be numbers representing the missing row indexes seperated by commas e.g. 13,25,99ro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.1.18.3 |
agFileTypeThis identifies the file type that is being transfered.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.1.18.4 |
agFileTableSizeThe number of rows in the file table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.18.5 |
agFileTableThe table of octets that when combined create a file. SEQUENCE OF AgFileTableEntry .1.3.6.1.4.1.1872.2.5.1.1.18.6 |
agFileTableEntryAn entry in the file table. AgFileTableEntry .1.3.6.1.4.1.1872.2.5.1.1.18.6.1 |
agFileIndexThe table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.18.6.1.1 |
agFileStringA string with bogon ip/mask pair.rw OCTET STRING .1.3.6.1.4.1.1872.2.5.1.1.18.6.1.2 |
agFileErrorTableSizeThe number of strings in the snmp file transfer error table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.18.7 |
agFileErrorTableThe table of error messages for asynchrnous snmp file transfer operation. SEQUENCE OF AgFileErrorTableEntry .1.3.6.1.4.1.1872.2.5.1.1.18.8 |
agFileErrorTableEntryError Strings generated while asynchronous snmp file transfer operation. AgFileErrorTableEntry .1.3.6.1.4.1.1872.2.5.1.1.18.8.1 |
agFileErrorIndexThe table index for snmp file transfer error table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.1.18.8.1.1 |
agFileErrorStringA string in the snmp file transfer error table.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.1.18.8.1.2 |
agentStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2 |
pktStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.1 |
pktStatsAllocsTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.1.1 |
pktStatsFreesTotal number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.1.2 |
pktStatsAllocFailsTotal number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.1.3 |
pktStatsMediumsTotal number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.1872.2.5.1.2.1.4 |
pktStatsJumbosTotal number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.1872.2.5.1.2.1.5 |
pktStatsSmallsTotal number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Gauge32 .1.3.6.1.4.1.1872.2.5.1.2.1.6 |
pktStatsMediumsHiWatermarkThe highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.1.7 |
pktStatsJumbosHiWatermarkThe highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.1.8 |
pktStatsSmallsHiWatermarkThe highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.1.9 |
pktStatsDiscardsThe total number of packets which were chosen to be discarded because the number of buffers available in the packet buffer pool is low.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.1.10 |
mpCpuStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.2 |
mpCpuStatsUtil1SecondThe utilization of MP CPU over 1 second. It shows the percentage.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.2.1 |
mpCpuStatsUtil4SecondsThe utilization of MP CPU over 4 seconds. It shows the percentage.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.2.2 |
mpCpuStatsUtil64SecondsThe utilization of MP CPU over 64 seconds. It shows the percentage.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.2.3 |
portStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.3 |
portStatsTableThe table of port statistics. SEQUENCE OF PortStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.3.1 |
portStatsTableEntryA row in the port stats table. PortStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.3.1.1 |
portStatsIndxThe port index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.1 |
portStatsPhyIfInOctetsThe total number of octets received on the interface, including framing characters.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.2 |
portStatsPhyIfInUcastPktsThe number of subnetwork-unicast packets delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.3 |
portStatsPhyIfInNUcastPktsThe number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.4 |
portStatsPhyIfInDiscardsThe number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.5 |
portStatsPhyIfInErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.6 |
portStatsPhyIfInUnknownProtosThe number of packets received via the interface which were discarded because of an unknown or unsupported protocol.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.7 |
portStatsPhyIfOutOctetsThe total number of octets transmitted out of the interface, including framing characters.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.8 |
portStatsPhyIfOutUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.9 |
portStatsPhyIfOutNUcastPktsThe total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.10 |
portStatsPhyIfOutDiscardsThe number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.11 |
portStatsPhyIfOutErrorsThe number of outbound packets that could not be transmitted because of errors.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.12 |
portStatsPhyIfOutQLenThe length of the output packet queue (in packets).ro Gauge32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.13 |
portStatsPhyIfInBroadcastPktsThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.14 |
portStatsPhyIfOutBroadcastPktsThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.15 |
portStatsClearSetting this value to clear(2) clears the stats for this port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.16 |
portStatsPhyIfInMcastPktsThe number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. .ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.17 |
portStatsPhyIfOutMcastPktsThe total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.3.1.1.18 |
spStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.4 |
spStatsCpuUtilTableThe table of SP CPU utilization. SEQUENCE OF SpStatsCpuUtilTableEntry .1.3.6.1.4.1.1872.2.5.1.2.4.1 |
spStatsCpuUtilTableEntryA row in the SP CPU utilization table. SpStatsCpuUtilTableEntry .1.3.6.1.4.1.1872.2.5.1.2.4.1.1 |
spStatsCpuUtilSpIndexThe SP index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.1.1.1 |
spStatsCpuUtil1SecondThe utilization of this SP over 1 second. It shows the percentage.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.1.1.2 |
spStatsCpuUtil4SecondsThe utilization of this SP over 4 seconds. It shows the percentage.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.1.1.3 |
spStatsCpuUtil64SecondsThe utilization of this SP over 64 seconds. It shows the percentage.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.1.1.4 |
spMaintStatsTableThe table of SP maintenance statistics. SEQUENCE OF SpMaintStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.4.2 |
spMaintStatsTableEntryA row in the SP maintenance statistics table. SpMaintStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.4.2.1 |
spMaintStatsSpIndexThe SP index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.1 |
spMaintStatsPfdbFreeEmptyThe number of times the attempts were made to add entries to an already full FDB.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.2 |
spMaintStatsResolveErrNoddwThe number of times MAC address resolution failed because there were no DMA descriptors.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.3 |
spMaintStatsLearnErrNoddwThe number of times MAC address learn failed because there were no DMA descriptors.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.4 |
spMaintStatsAgeMPNoddwThe number of times MAC address aging failed because there were no DMA descriptors.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.5 |
spMaintStatsDeleteMissThe number of times MAC address could not be found.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.6 |
spMaintStatsRecvLetErrorsMPThe number of receive letter errors from MP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.7 |
spMaintStatsRecvLetErrorsSP1The number of receive letter errors from SP1. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.8 |
spMaintStatsRecvLetErrorsSP2The number of receive letter errors from SP2. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.9 |
spMaintStatsRecvLetErrorsSP3The number of receive letter errors from SP3. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.10 |
spMaintStatsRecvLetErrorsSP4The number of receive letter errors from SP4. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.11 |
spMaintStatsSendLetFailsMPThe number of send letter failures to MP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.12 |
spMaintStatsSendLetFailsSP1The number of send letter failures to SP1. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.13 |
spMaintStatsSendLetFailsSP2The number of send letter failures to SP2. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.14 |
spMaintStatsSendLetFailsSP3The number of send letter failures to SP3. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.15 |
spMaintStatsSendLetFailsSP4The number of send letter failures to SP4. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.16 |
spMaintStatsRecvLetSuccessMPThe number of receive letter success from MP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.17 |
spMaintStatsRecvLetSuccessSP1The number of receive letter success from SP1. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.18 |
spMaintStatsRecvLetSuccessSP2The number of receive letter success from SP2. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.19 |
spMaintStatsRecvLetSuccessSP3The number of receive letter success from SP3. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.20 |
spMaintStatsRecvLetSuccessSP4The number of receive letter success from SP4. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.21 |
spMaintStatsSendLetSuccessMPThe number of send letter success to MP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.22 |
spMaintStatsSendLetSuccessSP1The number of send letter success to SP1. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.23 |
spMaintStatsSendLetSuccessSP2The number of send letter success to SP2. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.24 |
spMaintStatsSendLetSuccessSP3The number of send letter success to SP3. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.25 |
spMaintStatsSendLetSuccessSP4The number of send letter success to SP4. If the current table index is the same as the SP number then a value of 0 is returned.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.26 |
spMaintStatsRateLimitArpDropsThe total number of ARP packets dropped due to rate limiting.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.27 |
spMaintStatsRateLimitIcmpDropsThe total number of ICMP packets are dropped due to rate limiting.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.28 |
spMaintStatsRateLimitTcpDropsThe total number of TCP packets are dropped due to rate limiting.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.29 |
spMaintStatsRateLimitUdpDropsThe total number of UDP packets are dropped due to rate limiting.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.2.1.30 |
spMemStatsTableThe table of SP memory statistics. SEQUENCE OF SpMemStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.4.3 |
spMemStatsTableEntryA row in the SP memory statistics table. SpMemStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.4.3.1 |
spMemStatsIndexThe SP index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.3.1.1 |
spMemStatsTotalThe total memory of SP in bytes.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.3.1.2 |
spMemStatsCurrThe current memory of SP in bytes.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.3.1.3 |
spMemStatsAllocsThe total number of dynamic memory allocations in SP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.3.1.4 |
spMemStatsFreesThe total number of dynamic memory frees in SP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.3.1.5 |
spMemStatsAllocsFailuresThe total number of dynamic memory allocation failures in SP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.4.3.1.6 |
spMemStatsHiWatThe high watermark in SP.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.4.3.1.7 |
mgmtStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.5 |
mgmtStatsRxpacketsTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.1 |
mgmtStatsRxErrorsThe number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.2 |
mgmtStatsRxDroppedThe number of inbound packets that were dropped.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.3 |
mgmtStatsRxOverrunsThe number of data overruns over this link.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.4 |
mgmtStatsRxFrameThe number of frames received on this link.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.5 |
mgmtStatsTxpacketsTotal number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.6 |
mgmtStatsTxErrorsThe number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.7 |
mgmtStatsTxDroppedThe number of outbound packets that were dropped.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.8 |
mgmtStatsTxOverrunsThe number of data overruns over this link.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.9 |
mgmtStatsTxCarrierThe number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.10 |
mgmtStatsTxCollisionsThe number of collisions on this outbound segment.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.11 |
mgmtStatsTxQueueLenThe length of the TCP transmit queue.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.12 |
mgmtStatsRxBytesThe total number of bytes received.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.13 |
mgmtStatsRxMulticastThe total number of multicast packets received.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.14 |
mgmtStatsTxBytesThe total number of bytes transmitted.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.5.15 |
securityStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.6 |
agDosPortStatsTableThe table of DOS port statistics. SEQUENCE OF AgDosPortStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.1 |
agDosPortStatsTableEntryA row in the port stats table. AgDosPortStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.1.1 |
agDosPortStatsIndxThe port index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.1 |
agDosPortStatsIPLenIPv4 packets with bad IP header or payload length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.10 |
agDosPortStatsIPVersionIPv4 packets with IP version not 4.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.11 |
agDosPortStatsBroadcastIPv4 packets with broadcast source or destination IP [0.0.0.0,255.255.255.255].ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.12 |
agDosPortStatsLoopbackIPv4 packets with loopback source or destination IP [127.0.0.0/8].ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.13 |
agDosPortStatsLandIPv4 Packets with source IP equal to destination IP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.14 |
agDosPortStatsIPReservedIPv4 packets with IP reserved bit is set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.15 |
agDosPortStatsIPTTLIPv4 packets with small IP TTL.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.16 |
agDosPortStatsIPProtIPv4 packets with IP protocol is unassigned or reserved.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.17 |
agDosPortStatsIPOptLenIPv4 packets with bad IP options length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.18 |
agDosPortStatsFragMoreDontIPv4 packets with more fragments and don't fragment bits are set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.19 |
agDosPortStatsFragDataIPv4 packets with more fragments bit is set and small payload.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.20 |
agDosPortStatsFragBoundaryIPv4 packets with more fragments bit is set and payload not at 8-byte boundary.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.21 |
agDosPortStatsFragLastIPv4 packets last fragment without payload.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.22 |
agDosPortStatsFragDontOffIPv4 packets with non-zero fragment offset and don't fragment bits are set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.23 |
agDosPortStatsFragOptIPv4 packets with non-zero fragment offset and IP options.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.24 |
agDosPortStatsFragOffIPv4 packets with small non-zero fragment offset.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.25 |
agDosPortStatsFragOversizeIPv4 packets with non-zero fragment offset and oversize payload.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.26 |
agDosPortStatsTCPLenTCP packets with bad TCP header length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.27 |
agDosPortStatsTCPPortZeroTCP packets with source or destination port is zero.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.28 |
agDosPortStatsBlatAttackTCP packets source IP not equal to destination IP and source port equal to destination port.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.29 |
agDosPortStatsTCPReservedTCP packets with TCP reserved bit is set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.30 |
agDosPortStatsNullScanAttackTCP packets were the TCP sequence number is zero and all control bits are zeroes.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.31 |
agDosPortStatsFullXmasScanTCP packets with all control bits are set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.32 |
agDosPortStatsFinScanTCP packets with only FIN bit is set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.33 |
agDosPortStatsVecnaScanTCP packets with only URG or PUSH or URG|FIN or PSH|FIN or URG|PSH bits are set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.34 |
agDosPortStatsXmasScanAttackTCP packets were the TCP sequence number is zero and FIN, URG and PSH bits are set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.35 |
agDosPortStatsSynFinScanTCP packets were SYN and FIN bits are set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.36 |
agDosPortStatsFlagAbnormalTCP packets with abnormal control bits combination.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.37 |
agDosPortStatsSYNDataTCP packets with SYN bit is set and with payload.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.38 |
agDosPortStatsSYNFragTCP packets with SYN bit is set and more fragments bit is set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.39 |
agDosPortStatsFTPPortTCP packets with SPORT=20, DPORT<1024 and SYN bit is set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.40 |
agDosPortStatsDNSPortTCP packets with SPORT=53, DPORT<1024 and SYN bit is set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.41 |
agDosPortStatsSeqZeroTCP packets with sequence number is zero.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.42 |
agDosPortStatsAckZeroTCP packets with acknowledgement number is zero and ACK bit is set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.43 |
agDosPortStatsTCPOptLenTCP packets with bad TCP options length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.44 |
agDosPortStatsUDPLenUDP packets with bad UDP header length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.45 |
agDosPortStatsUDPPortZeroUDP packets with source or destination port is zero.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.46 |
agDosPortStatsFraggleAttackUDP packets sent to a broadcast destination IP (x.x.x.255).ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.47 |
agDosPortStatsPepsiUDP packets with SPORT=19, DPORT=7 or SPORT=7, DPORT=19.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.48 |
agDosPortStatsRc8UDP packets with SPORT=7 and DPORT=7.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.49 |
agDosPortStatsSNMPNullUDP packets with DPORT=161 and without payload.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.50 |
agDosPortStatsICMPLenICMP packets with bad ICMP header length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.51 |
agDosPortStatsSmurfAttackICMP ping request to a broadcast destination IP x.x.x.255.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.52 |
agDosPortStatsICMPDataICMP packets with non-zero fragment offset and large payload.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.53 |
agDosPortStatsICMPOffICMP packets with large fragment offset.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.54 |
agDosPortStatsICMPTypeICMP packets with type is reserved.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.55 |
agDosPortStatsIGMPLenIGMP packets with bad IGMP header length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.56 |
agDosPortStatsIGMPFragIGMP packets with more fragments bit is set.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.57 |
agDosPortStatsIGMPTypeIGMP packets with type is reserved.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.58 |
agDosPortStatsARPLenARP request or reply packets with bad length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.59 |
agDosPortStatsARPNbCastARP request packets with non broadcast destination MAC.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.60 |
agDosPortStatsARPNuCastARP reply packets with non unicast destination MAC.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.61 |
agDosPortStatsARPSpoofARP request or reply packets with mismatch source with sender MACs or destination with target MACs.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.62 |
agDosPortStatsGARPARP request or reply packets with same source and destination IP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.63 |
agDosPortStatsIP6LenIPv6 packets with bad header length.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.64 |
agDosPortStatsIP6VersionIPv6 packets with IP version not 6.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.1.1.65 |
agSecurityPgrpStatsTableThe table of pattern group statistics. SEQUENCE OF AgSecurityPgrpStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.2 |
agSecurityPgrpStatsTableEntryA row in the port stats table. AgSecurityPgrpStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.2.1 |
agSecurityPgrpStatsIndxThe Pattern Group index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.2.1.1 |
agSecurityPgrpStatsNameThe name of the Pattern Group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.2.6.2.1.2 |
agSecurityPgrpStatsHitsThe total hits for this Pattern Group.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.2.1.3 |
agSecurityUbStatsTableThe table of UDP Blast statistics. SEQUENCE OF AgSecurityUbStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.3 |
agSecurityUbStatsTableEntryA row in the UDP Blast stats table. AgSecurityUbStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.3.1 |
agSecurityUbStatsIndxThe UDP Blast Statistics Group index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.3.1.1 |
agSecurityUbStatsPortUDP Port Number.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.3.1.2 |
agSecurityUbStatsBlockedPacketTotal blocked packet.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.3.1.3 |
agSecurityUbStatsPacketRateCurrent Packet rate per second.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.3.1.4 |
agSecurityIpAclStatsTableThe table of IP ACL statistics. SEQUENCE OF AgSecurityIpAclStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.4 |
agSecurityIpAclStatsTableEntryA row in the IP ACL stats table. AgSecurityIpAclStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.4.1 |
agSecurityIpAclStatsIndxThe IP ACL Statistics Group index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.4.1.1 |
agSecurityIpAclStatsAddressIP ACL IP Address.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.2.6.4.1.2 |
agSecurityIpAclStatsBlockedPacketTotal blocked packet.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.4.1.3 |
agSecurityIpDstAclStatsTableThe table of DST IP ACL statistics. SEQUENCE OF AgSecurityIpDstAclStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.5 |
agSecurityIpDstAclStatsTableEntryA row in the DST IP ACL stats table. AgSecurityIpDstAclStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.5.1 |
agSecurityIpDstAclStatsIndxThe DST IP ACL Statistics Group index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.5.1.1 |
agSecurityIpDstAclStatsAddressDST IP ACL IP Address.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.2.6.5.1.2 |
agSecurityIpDstAclStatsBlockedPacketTotal blocked packet.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.5.1.3 |
symantecStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.6.6 |
symStatsTotalHitsTotal number of Symantec Hits.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.1 |
symStatsClearClear Symantec hit stats.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.2.6.6.2 |
symStatsSourceIpSource IP Address of the last hit.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.2.6.6.3 |
symStatsSourcePortSource Port of the last hit.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.4 |
symStatsDestIpDestination IP Address of the lsat hit.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.2.6.6.5 |
symStatsDestPortDestination Port of the last hit.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.6 |
symStatsProtocolProtocol of the last hit.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.2.6.6.7 |
symStatsLastHitIdLast Hit Id.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.8 |
symStatsConfiguredHitsMaxMax number of entries in configured hits table and configured hits count on sp table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.9 |
symStatsConfiguredHitsTableSymantec configured hits stats table. SEQUENCE OF SymStatsConfiguredHitsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.6.10 |
symStatsConfiguredHitsTableEntryA Symantec configured hits stats table entry. SymStatsConfiguredHitsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.6.10.1 |
symStatsConfiguredHitsTblIndexThe Symantec configured hits stats table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.10.1.1 |
symStatsConfiguredHitsSigIdSignature Id hit.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.10.1.2 |
symStatsConfiguredHitsTotalSpHCountTotal Hit Count on all SPs.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.10.1.3 |
symStatsConfiguredHitsInContIn-Contract used.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.10.1.4 |
symStatsConfiguredHitsOutContOut-Contract used.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.10.1.5 |
symStatsConfiguredHitsLastHitTimeLast hit Time.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.2.6.6.10.1.6 |
symStatsConfiguredHitsCountOnSpTableSymantec configured hit count Sp stats table. SEQUENCE OF SymStatsConfiguredHitsCountOnSpTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.6.11 |
symStatsConfiguredHitsCountOnSpTableEntryA Symantec configured hits stats table entry. SymStatsConfiguredHitsCountOnSpTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.6.11.1 |
symStatsConfiguredHitsCountOnSpTblIndexThe Symantec configured hit count SP table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.11.1.1 |
symStatsConfiguredHitsCountOnSpTblSpIndexThe Symantec configured hit count SP table SP index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.11.1.2 |
symStatsConfiguredHitsCountOnSpTblHitCountHit Count on SP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.11.1.3 |
symStatsUnconfiguredHitsMaxMax number of entries in unconfigured hits table and unconfigured hits count on sp table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.12 |
symStatsUnconfiguredHitsTableSymantec unconfigured hits stats table. SEQUENCE OF SymStatsUnconfiguredHitsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.6.13 |
symStatsUnconfiguredHitsTableEntryA Symantec unconfigured hits stats table entry. SymStatsUnconfiguredHitsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.6.13.1 |
symStatsUnconfiguredHitsTblIndexThe Symantec unconfigured hits stats table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.13.1.1 |
symStatsUnconfiguredHitsSigIdSignature Id hit.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.13.1.2 |
symStatsUnconfiguredHitsTotalSpHCountTotal Hit Count on all SPs.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.13.1.3 |
symStatsUnconfiguredHitsLastHitTimeLast hit Time.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.2.6.6.13.1.4 |
symStatsUnconfiguredHitsCountOnSpTableSymantec unconfigured hit count Sp stats table. SEQUENCE OF SymStatsUnconfiguredHitsCountOnSpTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.6.14 |
symStatsUnconfiguredHitsCountOnSpTableEntryA Symantec unconfigured hits stats table entry. SymStatsUnconfiguredHitsCountOnSpTableEntry .1.3.6.1.4.1.1872.2.5.1.2.6.6.14.1 |
symStatsUnconfiguredHitsCountOnSpTblIndexThe Symantec unconfigured hit count SP table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.14.1.1 |
symStatsUnconfiguredHitsCountOnSpTblSpIndexThe Symantec unconfigured hit count SP table SP index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.14.1.2 |
symStatsUnconfiguredHitsCountOnSpTblHitCountHit Count on SP.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.6.6.14.1.3 |
agClearStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.7 |
snmpClearStatsSetting this to clear(2) results in clearing the SNMP statistics.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.2.7.1 |
mpMemStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.8 |
mpMemStatsTotalThe total memory of MP.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.8.1 |
mpMemStatsUsedThe used memory of MP.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.8.2 |
mpMemStatsFreeThe free memory of MP.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.8.3 |
mpMemStatsLowFreeThe lowest free memory of MP.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.8.4 |
ntpStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.9 |
ntpPrimaryServerReqSentThe total number of NTP requests sent to Primary NTP Server.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.9.1 |
ntpPrimaryServerRespRcvdThe total number of NTP responces received from Primary NTP Server.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.9.2 |
ntpPrimaryServerUpdatesThe total number of NTP Updates by Primary NTP Server.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.9.3 |
ntpSecondaryServerReqSentThe total number of NTP requests sent to Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.9.4 |
ntpSecondaryServerRespRcvdThe total number of NTP responces received from Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.9.5 |
ntpSecondaryServerUpdatesThe total number of NTP Updates by Secondary NTP Server.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.9.6 |
ntpLastUpdateServerThe type of ntp server updated last time.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.2.9.7 |
ntpLastUpdateTimeThe last time updated by ntp server.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.2.9.8 |
ntpClearStatsSetting this value to clear(2) clears the stats for ntp.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.2.9.9 |
ntpSystemCurrentTimeThe current system time.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.2.9.10 |
portMirrorStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.11 |
portMirrorStatsTableThe table of port mirror statistics. SEQUENCE OF PortMirrorStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.11.1 |
portMirrorStatsTableEntryA row in the port mirror stats table. PortMirrorStatsTableEntry .1.3.6.1.4.1.1872.2.5.1.2.11.1.1 |
portMirrorStatsIndxThe port index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.2.11.1.1.1 |
portMirrorStatsIngressSpecifies number of bytes mirrored in ingress port.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.11.1.1.2 |
portMirrorStatsEgressSpecifies number of bytes mirrored in egress port.ro Counter32 .1.3.6.1.4.1.1872.2.5.1.2.11.1.1.3 |
portMirrorClear OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.2.11.2 |
portMirrorStatsClearSetting this value to clear(2) clears the mirror stats.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.2.11.2.1 |
agentInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3 |
hardware OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.1 |
hwPartNumberThe hardware part number of the Alteon Switch.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.1 |
hwRevisionThe hardware revision. If the revision is not available, a zero length string should be returned.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.2 |
hwTemperatureStatusThe status of the temperature sensor.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.1.3 |
hwFanStatusThe status of the fan.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.1.4 |
hwOrderNumberThe hardware order number of the Alteon Switch.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.5 |
hwMainBoardNumberThe hardware main board number of the Alteon Switch.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.6 |
hwMainBoardRevisionThe hardware main board revision. If the revision is not available, a zero length string should be returned.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.7 |
hwEthernetBoardNumberThe hardware ethernet board number of the Alteon Switch.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.8 |
hwEthernetBoardRevisionThe hardware ethernet board revision. If the revision is not available, a zero length string should be returned.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.9 |
hwChassisSerialNumberThe chassis serial number of the Alteon Switch.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.10 |
hwChassisRevisionThe chassis revision. If the revision is not available, a zero length string should be returned.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.1.11 |
hwPowerThe type of power supply.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.1.24 |
portInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.2 |
portInfoTableThe table of port information. SEQUENCE OF PortInfoTableEntry .1.3.6.1.4.1.1872.2.5.1.3.2.1 |
portInfoTableEntryA row in the port information table. PortInfoTableEntry .1.3.6.1.4.1.1872.2.5.1.3.2.1.1 |
portInfoIndxThe port index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.1 |
portInfoSpeedThe current operational speed of the port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.2 |
portInfoModeThe current operational mode of the port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.3 |
portInfoFlowCtrlThe current operational flow control of the port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.4 |
portInfoLinkThe current operational link status of the port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.5 |
portInfoPhyIfDescrA textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.6 |
portInfoPhyIfTypeThe type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.7 |
portInfoPhyIfMtuThe size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.8 |
portInfoPhyIfPhysAddressThe interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.9 |
portInfoPhyIfOperStatusThe current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.10 |
portInfoPhyIfLastChangeThe value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.11 |
portInfoPhyConnTypeThe physical connection type, i.e. copper or SFP port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.12 |
portInfoPreferredThe port preferred connection type. For dual ports onlyro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.13 |
portInfoBackupThe port backup setting. For dual ports onlyro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.14 |
portInfoSFPNameA textual string containing information about the SFP manufacturer. For valid ports only.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.15 |
portInfoSFPTypeThe inserted SFP type. For valid ports only.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.2.1.1.17 |
swKeyInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.3 |
agEnabledSwFeaturesThe software features that are enabled on the switch.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.3.1 |
agEnabledGslbKeyQuery if software key Global slb enabled on switch.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.3.2 |
agEnabledBwmKeyQuery if software key Bandwidth Mgmt. enabled on switch.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.3.3 |
agEnabledSecurityKeyQuery if software key Security enabled on switch.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.3.4 |
agEnabledLinklbKeyQuery if software key Inbound Linklb is enabled on switch.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.3.6 |
agSymantecSwKeyInfoQuery about the Symantec Software key enabled(1) or disabled(2), or expired(3) in the switch.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.3.7 |
agSymantecSwKeyRemainingDaysQuery the number of remaining days for Symantec SwKey to expire.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.3.8 |
agSymLicenseSwKeyRenewalPendingSymantec License Renewal Pending indicator.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.3.9 |
agDiff OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.4 |
agDiffStateWhen this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete. Once the agDiffTable is read the state should be set back to 'idle' which frees the diff buffer and others can issue a diff command via SNMP.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.3.4.2 |
agDiffTableSizeThe number of strings in the diff table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.4.3 |
agDiffTableThe table of diff strings. SEQUENCE OF AgDiffTableEntry .1.3.6.1.4.1.1872.2.5.1.3.4.4 |
agDiffTableEntryAn entry in the diff table. AgDiffTableEntry .1.3.6.1.4.1.1872.2.5.1.3.4.4.1 |
agDiffIndexThe table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.4.4.1.1 |
agDiffStringA string in the diff table.ro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.3.4.4.1.2 |
agCfgDump OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.5 |
agCfgDumpStateWhen this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.3.5.2 |
agCfgDumpTableSizeThe number of strings in the dump table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.5.3 |
agCfgDumpTableThe table of dump strings. SEQUENCE OF AgCfgDumpTableEntry .1.3.6.1.4.1.1872.2.5.1.3.5.4 |
agCfgDumpTableEntryAn entry in the dump table. AgCfgDumpTableEntry .1.3.6.1.4.1.1872.2.5.1.3.5.4.1 |
agCfgDumpIndexThe table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.5.4.1.1 |
agCfgDumpStringA string in the dump table.ro OCTET STRING .1.3.6.1.4.1.1872.2.5.1.3.5.4.1.2 |
mgmtInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.6 |
mgmtPortInfoSpeedThe current operational speed of the management port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.6.1 |
mgmtPortInfoModeThe current operational mode of the management port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.6.2 |
mgmtPortInfoLinkThe current operational link status of the management port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.6.3 |
securityInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.7 |
ipAclBogonInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.7.1 |
ipAclBogonInfoTableMaxSizeThe number of bogon IPs in IP ACL table.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.1.1 |
ipAclBogonInfoTableThe table of bogons. SEQUENCE OF IpAclBogonInfoTableEntry .1.3.6.1.4.1.1872.2.5.1.3.7.1.2 |
ipAclBogonInfoTableEntryAn entry in the bogon IP ACL table. IpAclBogonInfoTableEntry .1.3.6.1.4.1.1872.2.5.1.3.7.1.2.1 |
ipAclBogonInfoIndexThe table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.1.2.1.1 |
ipAclBogonInfoIpBogon IP Address.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.3.7.1.2.1.2 |
ipAclBogonInfoMaskMask for the bogon IP.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.3.7.1.2.1.3 |
symantecInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.7.2 |
symIpsEngineVersionSymantec IPS Engine Version.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.7.2.1 |
symMatchInfoSpTableSymantec Match Info SP table. SEQUENCE OF SymMatchInfoSpTableEntry .1.3.6.1.4.1.1872.2.5.1.3.7.2.2 |
symMatchInfoSpTableEntryA Symantec Match Info SP table entry. SymMatchInfoSpTableEntry .1.3.6.1.4.1.1872.2.5.1.3.7.2.2.1 |
symMatchInfoSpTableIndexThe Match Info SP table index which is the SP index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.2.2.1.1 |
symMatchInfoSpClientIpThe Client IP Address.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.3.7.2.2.1.2 |
symMatchInfoSpServerIpThe Server IP Address.ro IpAddress .1.3.6.1.4.1.1872.2.5.1.3.7.2.2.1.3 |
symMatchInfoSpClientPortThe Client Port.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.2.2.1.4 |
symMatchInfoSpServerPortThe Server Port.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.2.2.1.5 |
symMatchInfoSpProtocolThe Protocol.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.7.2.2.1.6 |
symMatchInfoSpNumOfMatchesNumber of matches.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.2.2.1.7 |
symMatchInfoSpSigActTableSymantec Match Info SP Signature-Action table. SEQUENCE OF SymMatchInfoSpSigActTableEntry .1.3.6.1.4.1.1872.2.5.1.3.7.2.3 |
symMatchInfoSpSigActTableEntryA Symantec Match Info SP Signature-Action table entry. SymMatchInfoSpSigActTableEntry .1.3.6.1.4.1.1872.2.5.1.3.7.2.3.1 |
symMatchInfoSpSigActTblSpIndexThe match info signature action table SP index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.2.3.1.1 |
symMatchInfoSpSigActTblIndexThe Match Info signature action table index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.2.3.1.2 |
symMatchInfoSpSigActTblSigIdThe Signature Id matched.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.7.2.3.1.3 |
symMatchInfoSpSigActTblActionAction taken for the signature Id.ro DisplayString .1.3.6.1.4.1.1872.2.5.1.3.7.2.3.1.4 |
capacityInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.9 |
switchCapL2Info OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.9.1 |
switchCapFDBMaxEntMaximum number of entries for FDB in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.1 |
switchCapFDBCurrEntCurrent number of entries for FDB in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.2 |
switchCapFDBPerSPMaxEntMaximun number of entries for FDB per SP in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.3 |
switchCapVlanMaxEntMaximum number of entries for vlan in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.4 |
switchCapVlanCurrEntCurrent number of entries for vlan in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.1.5 |
switchCapStaticTrunkGrpsMaxEntMaximum number of entries for static trunk groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.6 |
switchCapStaticTrunkGrpsCurrEntCurrent number of entries for static trunk groups in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.1.7 |
switchCapLACPTrunkGRsLACP Trunk groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.8 |
switchCapTrunksperTrunkGRTrunks per trunk group in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.9 |
switchCapSTGsMaxEntMaximum number of entries for STG in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.10 |
switchCapSTGsCurrEntCurrent number of entries for STG in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.1.11 |
switchCapPortTeamsMaxEntMaximum number of entries for port teams in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.12 |
switchCapPortTeamsCurrEntCurrent number of entries for port teams in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.1.13 |
switchCapMonitorPortsMaximum number of monitor ports.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.1.14 |
switchCapL3Info OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.9.2 |
switchCapIpIntfMaxEntMaximum number of entries for interfaces in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.1 |
switchCapIpIntfCurrEntCurrent number of entries for interfaces in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.2 |
switchCapIpGWMaxEntMaximum number of entries for gateways in device, the value is in the form x+y where 'x' indicates number of default gateways and 'y' indicates number of VLAN gateways.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.3 |
switchCapIpGWCurrEntCurrent number of entries for gateways in device, the value is in the form x+y(a+b) where 'x' indicates number of current default gateways, 'y' indicates number of current VLAN gateways, 'a' indicates number of enabled default gateways, 'b' indicates number of enabled VLAN gateways only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.4 |
switchCapIpRoutesMaxEntMaximum number of entries for routes in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.5 |
switchCapIpRoutesCurrEntCurrent number of entries for routes in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.6 |
switchCapIpStaticRoutesMaxEntMaximum number of entries for static routes in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.7 |
switchCapIpStaticRoutesCurrEntCurrent number of entries for static routes in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.8 |
switchCapIpARPMaxEntMaximum number of entries for ARP in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.9 |
switchCapIpARPCurrEntCurrent number of entries for ARP in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.10 |
switchCapIpStaticARPMaxEntMaximum number of entries for static ARP in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.11 |
switchCapIpStaticARPCurrEntCurrent number of entries for static ARP in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.12 |
switchCapLocNetsMaxEntMaximum number of entries for local nets in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.13 |
switchCapLocNetsCurrEntCurrent number of entries for local nets in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.14 |
switchCapDNSSerMaxEntMaximum number of entries for DNS servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.15 |
switchCapDNSSerCurrEntCurrent number of entries for DNS servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.16 |
switchCapBootpSerMaxEntMaximum number of entries for BOOTP servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.17 |
switchCapBootpSerCurrEntCurrent number of entries for BOOTP servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.18 |
switchCapRIPIntfMaxEntMaximum number of entries of RIP interfaces in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.19 |
switchCapRIPIntfCurrEntCurrent number of entries of RIP interfaces in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.20 |
switchCapOSPFIntfMaxEntMaximum number of entries for OSPF interfaces in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.21 |
switchCapOSPFIntfCurrEntCurrent number of entries for OSPF interfaces in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.22 |
switchCapOSPFAreasMaxEntMaximum number of entries for OSPF areas in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.23 |
switchCapOSPFAreasCurrEntCurrent number of entries for OSPF areas in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.24 |
switchCapOSPFSummaryRangesMaxEntMaximum number of entries for OSPF summary ranges in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.25 |
switchCapOSPFSummaryRangesCurrEntCurrent number of entries for OSPF summary ranges in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.26 |
switchCapOSPFVirtLinksMaxEntMaximum number of entries for OSPF virtual links in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.27 |
switchCapOSPFVirtLinksCurrEntCurrent number of entries for OSPF virtual links in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.28 |
switchCapOSPFHostsMaxEntMaximum number of entries for OSPF hosts in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.29 |
switchCapOSPFHostsCurrEntCurrent number of entries for OSPF hosts in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.30 |
switchCapLSDBLimitLSDB limit in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.31 |
switchCapBGPPeersMaxEntMaximum number of entries for BGP peers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.32 |
switchCapBGPPeersCurrEntCurrent number of entries for BGP peers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.33 |
switchCapBGPRouteAggrsMaxEntMaximum number of entries for BGP route aggregators in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.34 |
switchCapBGPRouteAggrsCurrEntCurrent number of entries for BGP route aggregators in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.35 |
switchCapRouteMapsMaxEntMaximum number of entries for route maps in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.36 |
switchCapRouteMapsCurrEntCurrent number of entries for route maps in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.37 |
switchCapNwkFltsMaxEntMaximum number of entries for network filters in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.38 |
switchCapNwkFltsCurrEntCurrent number of entries for network filters in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.39 |
switchCapASFltsMaximum number of entries for AS filters in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.40 |
switchCapVRRPRtrsMaxEntMaximum number of entries for VRRP routers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.41 |
switchCapVRRPRtrsCurrEntCurrent number of entries for VRRP routers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.42 |
switchCapVRRPRtrGRsMaxEntMaximum number of entries for VRRP router groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.43 |
switchCapVRRPRtrGRsCurrEntCurrent number of entries for VRRP router groups in device,the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.2.44 |
switchCapVRRPIntfsMaxEntMaximum number of entries for VRRP interfaces in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.45 |
switchCapVRRPIntfsCurrEntCurrent number of entries for VRRP interfaces in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.2.46 |
switchCapSlbInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.9.3 |
switchCapRealSersMaxEntMaximum number of entries for real servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.1 |
switchCapRealSersCurrEntCurrent number of entries for real servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.2 |
switchCapSerGRsMaxEntMaximum number of entries for real server groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.3 |
switchCapSerGRsCurrEntCurrent number of entries for real server groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.4 |
switchCapVirtSersMaxEntMaximum number of entries for virtual servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.5 |
switchCapVirtSersCurrEntCurrent number of entries for virtual servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.6 |
switchCapVirtServicesEntMaximum number of entries for virtual services in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.7 |
switchCapRealServicesEntCurrent number of entries for real services in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.8 |
switchCapRealIDSSerMaximum number of entries for real IDS servers.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.9 |
switchCapIDSSerGRsMaximum number of entries for IDS server groups.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.10 |
switchCapGSLBDomainsMaxEntMaximum number of entries for global SLB domains in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.11 |
switchCapGSLBDomainsCurrEntCurrent number of entries for global SLB domains in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.12 |
switchCapGSLBServicesMaxEntMaximum number of entries for global SLB services in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.13 |
switchCapGSLBServicesCurrEntCurrent number of entries for global SLB services in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.14 |
switchCapGSLBLocSersMaxEntMaximum number of entries for global SLB local servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.15 |
switchCapGSLBLocSersCurrEntCurrent number of entries for global SLB local servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.16 |
switchCapGSLBRemSersMaxEntMaximum number of entries for global SLB remote servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.17 |
switchCapGSLBRemSersCurrEntCurrent number of entries for global SLB remote servers in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.18 |
switchCapGSLBRemSitesMaxEntMaximum number of entries for global SLB sites in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.19 |
switchCapGSLBRemSitesCurrEntCurrent number of entries for global SLB sites in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.20 |
switchCapGSLBFailoversPerRemSiteMaxEntMaximum number of entries for global SLB failovers per site in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.21 |
switchCapGSLBFailoversPerRemSiteCurrEntCurrent number of entries for global SLB failovers per site in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.22 |
switchCapGSLBNetworksMaxEntMaximum number of entries for global SLB networks in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.23 |
switchCapGSLBNetworksCurrEntCurrent number of entries for global SLB networks in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.24 |
switchCapGSLBGeographicalRegionsMaxEntMaximum number of entries for global geographical regions in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.25 |
switchCapGSLBGeographicalRegionsCurrEntCurrent number of entries for global geographical regions in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.26 |
switchCapGSLBRulesMaxEntMaximum number of entries for global SLB rules in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.27 |
switchCapGSLBRulesCurrEntCurrent number of entries for global SLB rules in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.28 |
switchCapGSLBMetricsPerRuleMaxEntMaximum number of entries for global SLB metrics per rule in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.29 |
switchCapGSLBMetricPerRuleCurrEntCurrent number of entries for global SLB metrics per rule in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.30 |
switchCapGSLBDNSPersCacheMaxEntMaximum number of entries for global SLB DNS persistence cache in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.31 |
switchCapGSLBDNSPersCacheCurrEntCurrent number of entries for global SLB DNS persistence cache in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.32 |
switchCapFltsMaxEntMaximum number of entries for filters in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.33 |
switchCapFltsCurrEntCurrent number of entries for filters in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.34 |
switchCapPIPsMaxEntMaximum number of entries for PIPs in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.35 |
switchCapPIPsCurrEntCurrent number of entries for pips in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.36 |
switchCapScriptHealthChecksMaxEntMaximum number of entries for scriptable health checks in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.37 |
switchCapScriptHealthChecksCurrEntCurrent number of entries for scriptable health checks in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.38 |
switchCapSNMPHealthChecksMaxEntMaximum number of entries for SNMP health checks in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.39 |
switchCapSNMPHealthChecksCurrEntCurrent number of entries for snmp health checks in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.40 |
switchCapRulesforURLParsingMaxEntMaximum number of entries for rules for URL parsing in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.41 |
switchCapRulesforURLParsingCurrEntCurrent number of entries for rules for URL parsing in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.42 |
switchCapSLBSessionsMaxEntMaximum number of entries for SLB sessions in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.43 |
switchCapSLBSessionsCurrEntCurrent number of entries for SLB sessions in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.44 |
switchCapNumofRportstoVportMaximum number of rports to vport.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.45 |
switchCapDomianRecordsMaxEntMaximum number of entries for domain records in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.46 |
switchCapDomainRecordsCurrEntCurrent number of entries for domain records in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.3.47 |
switchCapMappingPerDomainrecordMaximum number of entries for mapping per domain record in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.3.48 |
switchCapSlbPortInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.9.4 |
switchCapSlbPortInfoTableThe table of slb port information. SEQUENCE OF SwitchCapSlbPortInfoTableEntry .1.3.6.1.4.1.1872.2.5.1.3.9.4.1 |
switchCapSlbPortInfoTableEntryA row in the slb port information table. SwitchCapSlbPortInfoTableEntry .1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1 |
switchCapSlbPortInfoIndxIndex of switch port.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.1 |
switchCapSlbPortClientStateClient state on the switch port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.2 |
switchCapSlbPortSerStateServer state on the switch port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.3 |
switchCapSlbPortFltStateIt is in the form E(x) where filter is enabled on the port and x is the number of filters configured for port. Otherwise disable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.4 |
switchCapSlbPortRTSStateRTS processing state on the switch port.ro Enumeration .1.3.6.1.4.1.1872.2.5.1.3.9.4.1.1.5 |
switchCapBwmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.9.5 |
bwmPoliciesMaxEntMaximum number of entries for bwm policies in device .ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.5.1 |
bwmPoliciesCurrEntCurrent number of entries for bwm policies in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.5.2 |
bwmContsMaxEntMaximum number of entries for bwm contracts in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.5.3 |
bwmContsCurrEntCurrent number of entries for bwm contracts in device, the value is in the form x(y) where 'x' indicates number of current entries and 'y' indicates number of enabled entries only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.5.4 |
bwmGRsMaxEntMaximum number of entries for bwm groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.5.5 |
bwmGRsCurrEntCurrent number of entries for bwm groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.5.6 |
bwmContsPerGRsMaximum number of entries for bwm contracts per group in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.5.7 |
bwmTimePoliciesPerContCurrent number of entries for bwm time policies per contract.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.5.8 |
switchCapSecInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.9.6 |
configSrcIPACLsMaxEntMaximum number of entries for configuration source IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.1 |
configSrcIPACLsCurrEntCurrent number of entries for configuration source IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.2 |
bogonSrcIPACLsMaxEntMaximum number of entries for bogon source IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.3 |
bogonSrcIPACLsCurrEntCurrent number of entries for bogon source IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.4 |
operSrcIPACLsMaxEntMaximum number of entries for operation source IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.5 |
operSrcIPACLsCurrEntCurrent number of entries for operaion source IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.6 |
totalSrcIPACLsMaxEntMaximum number of entries for total source IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.7 |
totalSrcIPACLsCurrEntCurrent number of entries for total source IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.8 |
configDstIPACLsMaxEntMaximum number of entries for configuration destination IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.9 |
configDstIPACLsCurrEntCurrent number of entries for configuration destination IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.10 |
operDstIPACLsMaxEntMaximum number of entries for operation destination IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.11 |
operDstIPACLsCurrEntCurrent number of entries for operaion destination IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.12 |
totalDstIPACLsMaxEntMaximum number of entries for total destination IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.13 |
totalDstIPACLsCurrEntCurrent number of entries for total destination IP ACLs.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.14 |
ipDosAtkPreventionMaximum number of entries for IP DOS attack prevention.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.15 |
tcpDosAtkPreventionMaximum number of entries for TCP DOS attack prevention.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.16 |
udpDosAtkPreventionMaximum number of entries for UDP DOS attack prevention.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.17 |
icmpDosAtkPreventionMaximum number of entries for ICMP DOS attack prevention.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.18 |
igmpDosAtkPreventionMaximum number of entries for IGMP DOS attack prevention.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.19 |
arpDosAtkPreventionMaximum number of entries for ARP DOS attack prevention.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.20 |
ipv6DosAtkPreventionMaximum number of entries for ipv6 DOS attack prevention.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.21 |
totalDosAtkPreventionTotal number of entries for DOS attack preventions.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.22 |
udpBlastProtectionSpecifies UDP ports for UDP blast protection.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.6.23 |
switchCapGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.3.9.7 |
syslogHostMaxEntMaximum number of entries for syslog hosts in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.1 |
syslogHostCurrEntCurrent number of entries for syslog hosts in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.2 |
radiusSerMaxEntMaximum number of entries for radius servers in device .ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.3 |
radiusSerCurrEntCurrent number of entries for radius servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.4 |
tacacsSerMaxEntMaximum number of entries for tacacs+ server in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.5 |
tacacsSerCurrEntCurrent number of entries for tacacs+ server in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.6 |
ntpSerMaxEntMaximum number of entries for ntp servers in device .ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.7 |
ntpSerCurrEntCurrent number of entries for ntp servers in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.8 |
smtpHostsMaxEntMaximum number of entries for smtp hosts in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.9 |
smtpHostsCurrEntCurrent number of entries for smtp hosts in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.10 |
mgmtNetworksMaxEntMaximum number of entries for management networks in device .ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.11 |
mgmtNetworksCurrEntCurrent number of entries for management networks in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.12 |
endUsersMaximum number of entries for end users in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.13 |
panicDumpsMaximum panic dumps in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.14 |
mpMemoryTotal capacity of MP memory in MBs in device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.7.15 |
spMemoryTotal capacity of SP memory in MBs in device.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.1.3.9.7.16 |
snmpv3UsersMaxEntMaximum number of entries for snmpv3 users in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.17 |
snmpv3UsersCurrEntCurrent number of entries for snmpv3 users in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.18 |
snmpv3ViewsMaxEntMaximum number of entries for snmpv3 views in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.19 |
snmpv3ViewsCurrEntCurrent number of entries for snmpv3 views in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.20 |
snmpv3AccessGRsMaxEntMaximum number of entries for snmpv3 access groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.21 |
snmpv3AccessGRsCurrEntCurrent number of entries for snmpv3 access groups in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.22 |
snmpv3TargetAddrMaxEntMaximum number of entries for snmpv3 target addresses in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.23 |
snmpv3TargetAddrCurrEntCurrent number of entries for snmpv3 target addresses in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.24 |
snmpv3TargetParamsMaxEntMaximum number of entries for snmpv3 target parameters in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.25 |
snmpv3TargetParamsCurrEntCurrent number of entries for snmpv3 target parameters in device.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.3.9.7.26 |
agentOper OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.4 |
agPortOperTableThe table of port operations. SEQUENCE OF AgPortOperTableEntry .1.3.6.1.4.1.1872.2.5.1.4.1 |
agPortOperTableEntryA row in the port operations table. AgPortOperTableEntry .1.3.6.1.4.1.1872.2.5.1.4.1.1 |
portOperIdxThe port index.ro Integer32 .1.3.6.1.4.1.1872.2.5.1.4.1.1.1 |
portOperStateEnable/Disable port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.4.1.1.2 |
portOperRmonEnable/Disable RMON for port.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.4.1.1.3 |
agNTPOper OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.1.4.2 |
ntpOperSendReqAllows the user to send requests to the NTP server.rw Enumeration .1.3.6.1.4.1.1872.2.5.1.4.2.1 |