ALTEON-CS-PHYSICAL-MIB
AI MIB Summary
The ALTEON-CS-PHYSICAL-MIB module provides management access to Layer 2 physical interface configurations, operational statistics, and hardware status data for Alteon OS-based application delivery controllers. It enables monitoring of interface states, link counters, and physical port parameters essential for maintaining network connectivity and performance on Alteon switching and load balancing platforms.
The MIB module for the Alteon OS Layer2 configuration, statistics and information .
Main OID:
layer2.1.3.6.1.4.1.1872.2.5.2
289
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
289 total| Object Name |
|---|
layer2The MIB module for the Alteon OS Layer2 configuration, statistics and information . MODULE-IDENTITY .1.3.6.1.4.1.1872.2.5.2 |
layer2Configs OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1 |
vlan OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.1 |
vlanMaxEntThe maximum number of rows in the VLAN configuration table.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.1 |
vlanCurCfgTableThe table of VLAN configuration. SEQUENCE OF VlanCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.1.2 |
vlanCurCfgTableEntryA row in the VLAN configuration table. VlanCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.1.2.1 |
vlanCurCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.1 |
vlanCurCfgVlanNameThe VLAN name.ro DisplayString .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.2 |
vlanCurCfgPortsThe port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.3 |
vlanCurCfgStateEnable or disable a VLANro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.4 |
vlanCurCfgBwmContractDefault contract number the VLANro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.5 |
vlanCurCfgStgThe Spanning Tree Group for the VLAN.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.6 |
vlanCurCfgJumboEnable or disable Jumbo frames on a VLANro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.7 |
vlanCurCfgLearnEnable or disable source MAC address learning on a VLANro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.1.2.1.8 |
vlanNewCfgTableThe table of VLAN configuration. SEQUENCE OF VlanNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.1.3 |
vlanNewCfgTableEntryA row in the VLAN configuration table. VlanNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.1.3.1 |
vlanNewCfgVlanIdThe VLAN identifier.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.1 |
vlanNewCfgVlanNameThe VLAN name.rw DisplayString .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.2 |
vlanNewCfgPortsThe port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.3 |
vlanNewCfgStateEnable or disable a VLANrw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.4 |
vlanNewCfgAddPortThe port to be added to the specified VLAN. A '0' value is returned when read.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.5 |
vlanNewCfgRemovePortThe port to be removed from the specified VLAN. A '0' value is returned when read.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.6 |
vlanNewCfgDeleteThis is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLANrw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.7 |
vlanNewCfgBwmContractDefault contract number for the VLAN.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.8 |
vlanNewCfgStgThe Spanning Tree Group for the VLAN.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.9 |
vlanNewCfgJumboEnable or disable Jumbo frames on a VLANrw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.10 |
vlanNewCfgLearnEnable or disable source mac address learning on a VLANrw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.1.3.1.11 |
vlanMaxVlanIDThe maximum allowed VLAN ID.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.1.4 |
trunkgroup OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.2 |
trunkGroupTableMaxSizeThe maximum number of entries in trunk group table.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.2.1 |
trunkGroupCurCfgTableThe table of trunk group configuration. SEQUENCE OF TrunkGroupCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.2.2 |
trunkGroupCurCfgTableEntryA row in the trunk group configuration table. TrunkGroupCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.2.2.1 |
trunkGroupCurCfgIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.1 |
trunkGroupCurCfgPortsThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk groupro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.2 |
trunkGroupCurCfgStateEnable or disable a trunk group.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.3 |
trunkGroupCurCfgBwmContractDefault BW contract of a trunk group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.2.2.1.4 |
trunkGroupNewCfgTableThe table of trunk group configuration. SEQUENCE OF TrunkGroupNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.2.3 |
trunkGroupNewCfgTableEntryA row in the trunk group configuration table. TrunkGroupNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.2.3.1 |
trunkGroupNewCfgIndexThe identifier of the trunk group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.1 |
trunkGroupNewCfgPortsThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the trunk group 0 - The represented port does not belong to the trunk groupro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.2 |
trunkGroupNewCfgAddPortThe port to be added in the trunk group. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.3 |
trunkGroupNewCfgRemovePortThe port to be deleted from the trunk group. when read, 0 is returned.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.4 |
trunkGroupNewCfgStateEnable or disable a trunk group.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.5 |
trunkGroupNewCfgDeleteSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.6 |
trunkGroupNewCfgBwmContractDefault BW contract of a trunk group.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.2.3.1.7 |
stgCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.3 |
stgCurCfgTableThe table of Spanning Tree Group configuration. SEQUENCE OF StgCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.3.1 |
stgCurCfgTableEntryInformation about a particular Spanning Tree Group configuration. StgCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.3.1.1 |
stgCurCfgIndexThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.1 |
stgCurCfgStateTurn on of off Spanning Tree operation of a particular Spanning Tree Group.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.2 |
stgCurCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.5 |
stgCurCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.6 |
stgCurCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.7 |
stgCurCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.8 |
stgCurCfgAgingTimeThe timeout period in seconds for aging out dynamically learned forwarding information.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.9 |
stgCurCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning treero OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.3.1.1.10 |
stgNewCfgTableThe table of Spanning Tree Groups configuration in the new_config. SEQUENCE OF StgNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.3.2 |
stgNewCfgTableEntryInformation about a particular Spanning Tree Group configuration. StgNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.3.2.1 |
stgNewCfgIndexThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.1 |
stgNewCfgStateTurn on of off Spanning Tree operation of a particular Spanning Tree Group.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.2 |
stgNewCfgDefaultCfgSetting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anything.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.3 |
stgNewCfgAddVlanThe vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.4 |
stgNewCfgRemoveVlanThe vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.5 |
stgNewCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.8 |
stgNewCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.9 |
stgNewCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.10 |
stgNewCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.11 |
stgNewCfgAgingTimeThe timeout period in seconds for aging out dynamically learned forwarding information.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.12 |
stgNewCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 (as index to stgCurCfgTable) where x : 1 - The represented vlan applied to the spanning tree. 0 - The represented vlan not applied to the spanning treero OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.3.2.1.13 |
stgCurCfgPortTableThe table of Spanning Tree Group port configuration in the current_config. SEQUENCE OF StgCurCfgPortTableEntry .1.3.6.1.4.1.1872.2.5.2.1.3.3 |
stgCurCfgPortTableEntryInformation about port configuration of a particular Spanning Tree Group. StgCurCfgPortTableEntry .1.3.6.1.4.1.1872.2.5.2.1.3.3.1 |
stgCurCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.1 |
stgCurCfgPortIndexThe port identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.2 |
stgCurCfgPortStateTurn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.3 |
stgCurCfgPortPriorityThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.4 |
stgCurCfgPortPathCostThe contribution of this port to the path cost of paths towards the spanning tree root which include this port (if MSTP/RSTP is enabled range is (0..200000000) else range is (0..65535) ).ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.5 |
stgCurCfgPortLinkThe type of the port link.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.6 |
stgCurCfgPortEdgeThe state of port edge.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.3.1.7 |
stgNewCfgPortTableThe table of Spanning Tree Group port configuration in the new_config. SEQUENCE OF StgNewCfgPortTableEntry .1.3.6.1.4.1.1872.2.5.2.1.3.4 |
stgNewCfgPortTableEntryInformation about port configuration of a particular Spanning Tree Group. StgNewCfgPortTableEntry .1.3.6.1.4.1.1872.2.5.2.1.3.4.1 |
stgNewCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.1 |
stgNewCfgPortIndexThe port identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.2 |
stgNewCfgPortStateTurn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.3 |
stgNewCfgPortPriorityThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.4 |
stgNewCfgPortPathCostThe contribution of this port to the path cost of paths towards the spanning tree root which include this port (if MSTP/RSTP is enabled range is (0..200000000) else range is (0..65535) ).rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.5 |
stgNewCfgPortLinkThe type of the port link.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.6 |
stgNewCfgPortEdgeThe state of port edge.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.3.4.1.7 |
mirroring OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.4 |
mirrPortMirr OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.4.1 |
pmCurCfgPortMirrStateThe state of port-based port mirroring.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.4.1.1 |
pmNewCfgPortMirrStateThe state of port-based port mirroring.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.4.1.2 |
pmCurCfgPortMonitorTableThe table of monitoring ports. SEQUENCE OF PmCurCfgPortMonitorEntry .1.3.6.1.4.1.1872.2.5.2.1.4.1.3 |
pmCurCfgPortMonitorEntryA row in the monitoring port table. PmCurCfgPortMonitorEntry .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1 |
pmCurCfgPmirrMoniPortIndexThe monitoring port number.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.1 |
pmCurCfgPmirrMirrPortIndexThe mirrored port numberro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.2 |
pmCurCfgPmirrDirectionThe type of traffic to be monitored with respect to the mirrored port.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.3 |
pmCurCfgPmirrPortVlansBmapThe mirrored VLANs (1-4096) list for the port. The VLANs are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented VLAN is being mirrored. 0 - The represented VLAN is not being mirrored. Note: When all octets are zero - all vlan(s) traffic is being for the portro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.6 |
pmNewCfgPortMonitorTableThe table of monitoring ports. SEQUENCE OF PmNewCfgPortMonitorEntry .1.3.6.1.4.1.1872.2.5.2.1.4.1.4 |
pmNewCfgPortMonitorEntryA row in the monitoring port table. PmNewCfgPortMonitorEntry .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1 |
pmNewCfgPmirrMoniPortIndexThe monitoring port number.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.1 |
pmNewCfgPmirrMirrPortIndexThe mirrored port numberro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.2 |
pmNewCfgPmirrDirectionThe type of traffic to be monitored with respect to the mirrored port.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.3 |
pmNewCfgPmirrDeleteSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.4 |
pmNewCfgAddVlanThe VLAN whose traffic is to be mirrored for this port. A '0' value is returned when read.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.7 |
pmNewCfgRemoveVlanThe VLAN whose traffic will no longer to be mirrored. A '0' value is returned when read.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.8 |
pmNewCfgPmirrPortVlansBmapThe mirrored VLANs(1-4096) list for the port. The VLANs are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ vlan 9 || || || ||___ vlan 8 || |____ vlan 7 || . . . ||_________ vlan 2 |__________ vlan 1 where x : 1 - The represented VLAN is being mirrored. 0 - The represented VLAN is not being mirrored. Note: All octets are zero means all vlan(s) traffic is being mirrored for the portro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.9 |
lacp OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.5 |
lacpCurSystemPriorityA 2-octet read-write value indicating the priority value associated with the Actor's System ID.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.5.1 |
lacpNewSystemPriorityA 2-octet read-write value indicating the priority value associated with the Actor's System ID.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.5.2 |
lacpCurSystemTimeoutTimeIf a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.5.5 |
lacpNewSystemTimeoutTimeIf a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.5.6 |
lacpCurPortCfgTableThe table of LACP port configuration. SEQUENCE OF LacpCurPortCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.5.7 |
lacpCurPortCfgTableEntryA row in the LACP port configuration table. LacpCurPortCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.5.7.1 |
lacpCurPortCfgTableIdLACP port number.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.5.7.1.1 |
lacpCurPortStateLACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.5.7.1.2 |
lacpCurPortActorPortPriorityThe priority value assigned to this Aggregation Port. This 16-bit value is read-only.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.5.7.1.3 |
lacpCurPortActorAdminKeyThe current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.5.7.1.4 |
lacpNewPortCfgTableThe table of LACP port configuration. SEQUENCE OF LacpNewPortCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.5.8 |
lacpNewPortCfgTableEntryA row in the LACP port configuration table. LacpNewPortCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.5.8.1 |
lacpNewPortCfgTableIdLACP port number.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.5.8.1.1 |
lacpNewPortStateLACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.5.8.1.2 |
lacpNewPortActorPortPriorityThe priority value assigned to this Aggregation Port. This 16-bit value is read-write.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.5.8.1.3 |
lacpNewPortActorAdminKeyThe current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.5.8.1.4 |
mstCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.7 |
mstGeneralCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.7.1 |
mstCurCfgStateEnable or disable MSTP/RSTPro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.1.1 |
mstNewCfgStateEnable or disable MSTP/RSTPrw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.1.2 |
mstCurCfgRegionNameThe Name for the Region's configuration.ro DisplayString .1.3.6.1.4.1.1872.2.5.2.1.7.1.3 |
mstNewCfgRegionNameThe Name for the Region's configuration.rw DisplayString .1.3.6.1.4.1.1872.2.5.2.1.7.1.4 |
mstCurCfgRegionVersionVersion of the MST Region.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.1.5 |
mstNewCfgRegionVersionVersion of the MST Region.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.1.6 |
mstCurCfgMaxHopCountIndicates the maximum hop count value.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.1.7 |
mstNewCfgMaxHopCountIndicates the maximum hop count value.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.1.8 |
mstCurCfgStpModeThe version of Spanning Tree Protocal the bridge is currently running.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.1.9 |
mstNewCfgStpModeThe version of Spanning Tree Protocal the bridge is currently running.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.1.10 |
mstCistCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.7.2 |
mstCistDefaultCfgSetting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not mean anything.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.2.1 |
mstCistBridgeCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.7.2.2 |
mstCistCurCfgBridgePriorityThe value of the writable portion of the Brigde Identifier comprising of the first two octets.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.2.1 |
mstCistNewCfgBridgePriorityThe value of the writable portion of the Brigde Identifier comprising of the first two octets.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.2.2 |
mstCistCurCfgBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.2.5 |
mstCistNewCfgBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.2.6 |
mstCistCurCfgBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.2.7 |
mstCistNewCfgBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.2.8 |
mstCistCurCfgPortTableThe table of CIST Port configuration. SEQUENCE OF MstCistCurCfgPortTableEntry .1.3.6.1.4.1.1872.2.5.2.1.7.2.3 |
mstCistCurCfgPortTableEntryInformation about a particular CIST Port configuration. MstCistCurCfgPortTableEntry .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1 |
mstCistCurCfgPortIndexThe port number of the port for which this entry contains spanning tree configuration.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.1 |
mstCistCurCfgPortPriorityThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.2 |
mstCistCurCfgPortPathCostThe contribution of this port to the path cost of paths towards the CIST Root which include this port.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.3 |
mstCistCurCfgPortLinkTypeThe administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.4 |
mstCistCurCfgPortEdgeThe value of the Edge Port parameter.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.5 |
mstCistCurCfgPortStpStateTurn port's Spanning Tree on/off.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.6 |
mstCistCurCfgPortHelloTimeThe amount of time between the transmission of Configuration Port PDUs in seconds.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.7 |
mstCistNewCfgPortTableThe table of CIST Port configuration. SEQUENCE OF MstCistNewCfgPortTableEntry .1.3.6.1.4.1.1872.2.5.2.1.7.2.4 |
mstCistNewCfgPortTableEntryInformation about a particular CIST Port configuration. MstCistNewCfgPortTableEntry .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1 |
mstCistNewCfgPortIndexThe port number of the port for which this entry contains spanning tree configuration.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.1 |
mstCistNewCfgPortPriorityThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.2 |
mstCistNewCfgPortPathCostThe contribution of this port to the path cost of paths towards the CIST Root which include this port.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.3 |
mstCistNewCfgPortLinkTypeThe administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port should be treated as having a shared media connection. A value of auto(1) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.4 |
mstCistNewCfgPortEdgeThe value of the Edge Port parameter.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.5 |
mstCistNewCfgPortStpStateTurn port's Spanning Tree on/off.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.6 |
mstCistNewCfgPortHelloTimeThe amount of time between the transmission of Configuration Port PDUs in seconds.rw INTEGER .1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.7 |
portTeamCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.1.9 |
portTeamTableMaxSizeThe maximum number of port teams.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.9.1 |
portTeamCurCfgTableThe port team current configuration. SEQUENCE OF PortTeamCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.9.2 |
portTeamCurCfgTableEntryA row in the port team configuration table. PortTeamCurCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.9.2.1 |
portTeamCurCfgIndexThe identifier of the port team.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.1 |
portTeamCurCfgStateEnable or disable a port team.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.2 |
portTeamCurCfgPortsThe port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || | ||___ port 7 | |____ port 6 | . . . |_________ port 1 where x : 1 - The represented port belongs to the port team 0 - The represented port does not belong to the port teamro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.3 |
portTeamCurCfgTrunksThe trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | || | ||___ trunk 7 | |____ trunk 6 | . . . |_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port teamro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.9.2.1.4 |
portTeamNewCfgTableThe port team new configuration. SEQUENCE OF PortTeamNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.9.3 |
portTeamNewCfgTableEntryA row in the port team configuration table. PortTeamNewCfgTableEntry .1.3.6.1.4.1.1872.2.5.2.1.9.3.1 |
portTeamNewCfgIndexThe identifier of the port team.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.1 |
portTeamNewCfgStateEnable or disable a port team.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.2 |
portTeamNewCfgPortsThe port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || | ||___ port 7 | |____ port 6 | . . . |_________ port 1 where x : 1 - The represented port belongs to the port team 0 - The represented port does not belong to the port teamro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.3 |
portTeamNewCfgAddPortThe port to be added in the port team. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.4 |
portTeamNewCfgRemovePortThe port to be deleted from the port team. When read, 0is returned.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.5 |
portTeamNewCfgTrunksThe trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | || | ||___ trunk 7 | |____ trunk 6 | . . . |_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port teamro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.6 |
portTeamNewCfgAddTrunkThe trunk to be added in the port team. When read, 0 is returned.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.7 |
portTeamNewCfgRemoveTrunkThe trunk to be deleted from the port team. When read, 0is returned.rw Integer32 .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.8 |
portTeamNewCfgDeleteSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.1.9.3.1.9 |
layer2Stats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.2 |
fdbStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.2.1 |
fdbStatsCreatesNumber of entries created in the Forwarding Database.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.1.1 |
fdbStatsDeletesNumber of entries deleted from the Forwarding Database.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.1.2 |
fdbStatsCurrentCurrent number of entries in the Forwarding Database.ro Gauge32 .1.3.6.1.4.1.1872.2.5.2.2.1.3 |
fdbStatsHiwatHighest number of entries recorded at any given time in the Forwarding Database.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.2.1.4 |
fdbStatsLookupsNumber of entry lookups in the Forwarding Database.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.1.5 |
fdbStatsLookupFailsNumber of unsuccessful searches made in the Forwarding Database.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.1.6 |
fdbStatsFindsNumber of searches in the Forwarding Database.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.1.7 |
fdbStatsFindFailsNumber of search failures in the Forwarding Database.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.1.8 |
fdbStatsFindOrCreatesNumber of entries found or created in the Forwarding Database.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.1.9 |
fdbStatsOverflowsNumber of entries overflowing the Forwarding Database.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.1.10 |
stpStats OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.2.2 |
stgStatsPortTableThe table of Spanning Tree Group port statistics. SEQUENCE OF StgStatsPortTableEntry .1.3.6.1.4.1.1872.2.5.2.2.2.1 |
stgStatsPortTableEntryStatistics about port of a particular Spanning Tree Group. StgStatsPortTableEntry .1.3.6.1.4.1.1872.2.5.2.2.2.1.1 |
stgStatsStpIndexThe identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.1 |
stgStatsPortIndexThe port identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.2 |
stgStatsPortRcvCfgBpdusNumber of Configuration BPDU's received on this port.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.3 |
stgStatsPortRcvTcnBpdusNumber of TCN BPDU's received on this port.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.4 |
stgStatsPortXmtCfgBpdusNumber of Configuration BPDU's trasmitted from the port.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.5 |
stgStatsPortXmtTcnBpdusNumber of TCN BPDU's trasmitted from the port.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.2.2.1.1.6 |
layer2Info OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.3 |
fdbInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.3.1 |
fdbClearSetting this value to clear(2) clears the entire master FDB.rw Enumeration .1.3.6.1.4.1.1872.2.5.2.3.1.1 |
fdbTableThe table of FDB entries. SEQUENCE OF FdbEntry .1.3.6.1.4.1.1872.2.5.2.3.1.2 |
fdbEntryA row in the FDB table FdbEntry .1.3.6.1.4.1.1872.2.5.2.3.1.2.1 |
fdbMacAddrThe MAC address for the FDB entry.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.1 |
fdbVlanThe VLAN ID for the FDB entry.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.2 |
fdbSrcPortEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding/filtering information about this address.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.3 |
fdbStateThe state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a destination address forward(3) : the MAC address has been learned by the switch flood(4) : the MAC address is a multicast destination address trunk(6) : frames with this MAC address are forwarded to trunk group vir(7) : frames with this MAC address are forwarded for L3 processingro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.4 |
fdbRefSpsThe referenced SPs associated with this FDB entry.ro DisplayString .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.5 |
fdbLearnedPortThe learned port associated with this FDB entry.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.6 |
fdbSrcTrunkEither the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen. A value of '0' indicates that the source address is not associated with a trunk.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.1.2.1.7 |
stpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.3.2 |
stpInfoTableThe table of Spanning Tree Group information. SEQUENCE OF StpInfoTableEntry .1.3.6.1.4.1.1872.2.5.2.3.2.1 |
stpInfoTableEntryInformation about a particular Spanning Tree Group. StpInfoTableEntry .1.3.6.1.4.1.1872.2.5.2.3.2.1.1 |
stpInfoIndexThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.1 |
stpInfoTimeSinceTopChangeThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.2 |
stpInfoTopChangesThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.3 |
stpInfoDesignatedRootThe bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.4 |
stpInfoRootCostThe cost of the path to the root as seen from this bridge.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.5 |
stpInfoRootPortThe port number of the port which offers the lowest cost path from this bridge to the root bridge.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.6 |
stpInfoMaxAgeThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.7 |
stpInfoHelloTimeThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.8 |
stpInfoForwardDelayThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.9 |
stpInfoHoldTimeThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.1.1.10 |
stpInfoPortTableThe table of Spanning Tree Group port information. SEQUENCE OF StpInfoPortTableEntry .1.3.6.1.4.1.1872.2.5.2.3.2.2 |
stpInfoPortTableEntryInformation about port configuration for a particular Spanning Tree Group. StpInfoPortTableEntry .1.3.6.1.4.1.1872.2.5.2.3.2.2.1 |
stpInfoPortStpIndexThe identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.1 |
stpInfoPortIndexThe port identifier of a particular Spanning Tree Group.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.2 |
stpInfoPortStateThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled, this object will have a value of disabled(1).ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.3 |
stpInfoPortDesignatedRootThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.4 |
stpInfoPortDesignatedCostThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.5 |
stpInfoPortDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.6 |
stpInfoPortDesignatedPortThe Port Identifier of the port on the Designated Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.7 |
stpInfoPortForwardTransitionsThe number of times this port has transitioned from the Learning state to the Forwarding state.ro Counter32 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.8 |
stpInfoPortPathCostThe path cost of the port.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.9 |
stpInfoPortRoleThe port role. Returns unknown(7) when MSTP/RSTP is not enabled, otherwise returns appropriate port role.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.10 |
stpInfoPortLinkTypeThe point-to-point status of the LAN segment attached to this port. A value of p2p (1) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(2) indicates that this port is being treated as having a shared media connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.11 |
stpInfoPortEdgeThe port is an edge port or not. Returns disabled(2) when the port is not an edge port and returns enabled(1) when it is an edge port.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.2.2.1.12 |
lacpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.3.3 |
lacpInfoPortTableThe table of LACP port information. SEQUENCE OF LacpInfoPortTableEntry .1.3.6.1.4.1.1872.2.5.2.3.3.1 |
lacpInfoPortTableEntryInformation about a LACP port. LacpInfoPortTableEntry .1.3.6.1.4.1.1872.2.5.2.3.3.1.1 |
lacpInfoPortIndexThe port identifier.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.1 |
lacpInfoPortSelectedSelected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently selected. A value of standby indicates that although the selection logic has selected an appropriate Aggregator, aggregation restrictions currently precent the port from being enabled as part of the aggregation, and so the port is being held in standby condition.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.2 |
lacpInfoPortNttNeed to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.3 |
lacpInfoPortReadyNTrue value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each port.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.4 |
lacpInfoPortMovedPort Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper port number in use by the port has been used by received in an incoming LACPDU on a different port.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.3.1.1.5 |
cistInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.3.4 |
cistGeneralInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.3.4.1 |
cistRootThe bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.1872.2.5.2.3.4.1.1 |
cistRootPathCostThe cost of the path to the CIST Root as seen from this bridge.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.1.2 |
cistRootPortThe Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.1.3 |
cistBridgeHelloTimeThe amount of time between the transmission of Configuration bridge PDUs in seconds.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.1.4 |
cistBridgeMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.1.5 |
cistBridgeForwardDelayThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.1.6 |
cistRegionalRootThe bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.1872.2.5.2.3.4.1.7 |
cistRegionalPathCostThe Cost of the path to the CIST Regional Root as seen from this bridge.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.1.8 |
cistInfoPortTableThe table of CIST Port information. SEQUENCE OF CistInfoPortTableEntry .1.3.6.1.4.1.1872.2.5.2.3.4.2 |
cistInfoPortTableEntryInformation about a particular CIST Port. CistInfoPortTableEntry .1.3.6.1.4.1.1872.2.5.2.3.4.2.1 |
cistInfoPortIndexThe port number of the port for which this entry contains spanning tree configuration.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.1 |
cistInfoPortPriorityThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.2 |
cistInfoPortPathCostThe contribution of this port to the path cost of paths towards the CIST Root which include this port.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.3 |
cistInfoPortStateCurrent state of the Port as defined by the Common spanning tree protocol.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.4 |
cistInfoPortRoleSelected Port Role of the port for this spanning tree instance.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.5 |
cistInfoPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.ro BridgeId (BRIDGE-MIB) .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.6 |
cistInfoPortDesignatedPortThe Port identifier of the port on the Designated Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.7 |
cistInfoPortLinkTypeThe point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a point-to-point link. A value of shared(3) indicates that this port is being treated as having a shared media connection.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.4.2.1.8 |
vlanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.3.5 |
vlanInfoTableThe table of VLAN information. SEQUENCE OF VlanInfoTableEntry .1.3.6.1.4.1.1872.2.5.2.3.5.1 |
vlanInfoTableEntryInformation about a particular VLAN. VlanInfoTableEntry .1.3.6.1.4.1.1872.2.5.2.3.5.1.1 |
vlanInfoIdThe VLAN identifier.ro INTEGER .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.1 |
vlanInfoNameThe VLAN name.ro DisplayString .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.2 |
vlanInfoStatusEnable or disable, VLAN state informationro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.3 |
vlanInfoJumboEnable or disable Jumbo frames, Jumbo frames state information of a VLANro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.4 |
vlanInfoBwmContractDefault BWM contract number information of a VLANro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.5 |
vlanInfoLearnEnable or disable source MAC address learning, MAC address learning information of a VLANro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.6 |
vlanInfoPortsThe port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to the VLAN 0 - The represented port does not belong to the VLANro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.3.5.1.1.7 |
portTeamInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.3.6 |
portTeamInfoTableThe port team information table. SEQUENCE OF PortTeamInfoTableEntry .1.3.6.1.4.1.1872.2.5.2.3.6.1 |
portTeamInfoTableEntryA row in the port team information table. PortTeamInfoTableEntry .1.3.6.1.4.1.1872.2.5.2.3.6.1.1 |
portTeamInfoIndexThe identifier of the port team.ro Integer32 .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.1 |
portTeamInfoStateState of a port team.ro Enumeration .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.2 |
portTeamInfoPortsThe port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || | ||___ port 7 | |____ port 6 | . . . |_________ port 1 where x : 1 - The represented port is added to the port team 0 - The represented port is not added to the port teamro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.3 |
portTeamInfoPortsStateThe port state list in the port team. The ports states are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 state | || | ||___ port 7 state | |____ port 6 state | . . . |_________ port 1 state where x : 1 - The represented port in that team is up 0 - If the represented port is added in that team then the port state is down otherwise the port is not added into that team( check whether port is added to the team or not through the mib portTeamInfoPorts).ro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.4 |
portTeamInfoTrunksThe trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | || | ||___ trunk 7 | |____ trunk 6 | . . . |_________ trunk 1 where x : 1 - The represented trunk belongs to the port team 0 - The represented trunk does not belong to the port teamro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.5 |
portTeamInfoTrunksStateThe trunk state list in the trunk team. The trunks states are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 state | || | ||___ trunk 7 state | |____ trunk 6 state | . . . |_________ trunk 1 state where x : 1 - The represented trunk in that team is up 0 - If the represented trunk is added in that team then the trunk state is down otherwise the port is not added into that team( check whether it is added to the team or not through the mib portTeamInfoTrunks).ro OCTET STRING .1.3.6.1.4.1.1872.2.5.2.3.6.1.1.6 |
layer2Oper OBJECT IDENTIFIER .1.3.6.1.4.1.1872.2.5.2.4 |