ALCATEL-IND1-TWAMP-MIB
AI MIB Summary
The ALCATEL-IND1-TWAMP-MIB enables the monitoring and control of Two-Way Active Measurement Protocol (TWAMP) sessions on Alcatel-Lucent network devices to measure network performance metrics such as one-way and round-trip delay, packet loss, and jitter. It facilitates the configuration of TWAMP test sessions and the retrieval of real-time measurement data for active network path analysis.
This module describes an authoritative enterprise-specific Two Way Active Measurement Protocol (TWAMP) Management Information Base (MIB):
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1TWAMPMIB.softentIND1TWAMP.1
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
alcatelIND1TWAMPMIBThis module describes an authoritative enterprise-specific Two Way Active
Measurement Protocol (TWAMP) Management Information Base (MIB):
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .softentIND1TWAMP.1 |
alcatelIND1TWAMPMIBObjectsBranch For Two Way Active Measurement Protocol (TWAMP)
Subsystem Managed Objects. OBJECT IDENTIFIER .softentIND1TWAMP.1.1 |
twampServerMIB OBJECT IDENTIFIER .softentIND1TWAMP.1.1.1 |
twampServerTabletwamp server information table. SEQUENCE OF TwampServerTableEntry .softentIND1TWAMP.1.1.1.1 |
twampServerTableEntrytwampServer configuration. TwampServerTableEntry .softentIND1TWAMP.1.1.1.1.1 |
twampPortNumberTCP port on which the server will be listening.rw INTEGER ( 0 .. 1000 ) .softentIND1TWAMP.1.1.1.1.1.1 |
twampInactivityTimeoutTime to wait in mins if no packet associated with the connection is received.rw INTEGER (0 .. 30) .softentIND1TWAMP.1.1.1.1.1.2 |
twampClientIpaddressClient IP or range and mask which shall be allowed to establish connection with the server.rw IpAddress .softentIND1TWAMP.1.1.1.1.1.3 |
twampClientIpaddressMaskMask for the corresponding Client IP .rw IpAddress .softentIND1TWAMP.1.1.1.1.1.4 |
twampRowStatusThe Rowstatus of the twampServerTableEntry. .rw RowStatus (SNMPv2-TC) .softentIND1TWAMP.1.1.1.1.1.5 |
twampServerConnectionTableThis table is used to display the TWAMP server connection details. SEQUENCE OF TwampServerConnectionTableEntry .softentIND1TWAMP.1.1.2 |
twampServerConnectionTableEntryEntry to display client IP,Session ID, Time of Last Run, Packets sent, Packets Received. TwampServerConnectionTableEntry .softentIND1TWAMP.1.1.2.1 |
twampServerConnClientIPTWAMP Client IPro IpAddress .softentIND1TWAMP.1.1.2.1.1 |
twampServerConnSessionIdTWAMP Client Session IDro SnmpAdminString (SNMP-FRAMEWORK-MIB) .softentIND1TWAMP.1.1.2.1.2 |
twampServerConnTimeOfLastRunTWAMP Client Session Time Of Last Runro DisplayString (SNMPv2-TC) .softentIND1TWAMP.1.1.2.1.3 |
twampServerConnPktsSentTWAMP Client Session Packets Sentro Integer32 .softentIND1TWAMP.1.1.2.1.4 |
twampServerConnPktsRecvdTWAMP Client Session Packets Receivedro Integer32 .softentIND1TWAMP.1.1.2.1.5 |
twampServerConnectionStatusTWAMP Client Connection Statusro DisplayString (SNMPv2-TC) .softentIND1TWAMP.1.1.2.1.6 |
alcatelIND1TWAMPMIBConformanceBranch For Two Way Active Measurement Protocol (TWAMP)
Subsystem Conformance Information. OBJECT IDENTIFIER .softentIND1TWAMP.1.2 |
alcatelIND1TWAMPMIBGroupsBranch For Two Way Active Measurement Protocol (TWAMP)
Subsystem Units Of Conformance. OBJECT IDENTIFIER .softentIND1TWAMP.1.2.1 |
alcatelIND1TWAMPMIBCompliancesBranch For Two Way Active Measurement Protocol (TWAMP)
Subsystem Compliance Statements. OBJECT IDENTIFIER .softentIND1TWAMP.1.2.2 |