Home/Catalog/ALCATEL-IND1-PPPOEIA-MIB

ALCATEL-IND1-PPPOEIA-MIB

AI MIB Summary

The ALCATEL-IND1-PPPOEIA-MIB enables SNMP-based monitoring of PPPoE Intermediate Agent instances within Alcatel-Lucent's Birds Of Prey product line, specifically tracking session establishment states, active connection counts, and interface binding metrics for broadband aggregation devices.

This module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line PPPoE Intermediate Agent. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1PPPoEIAMIB.1
42
Objects
Active
Status
6
Dependencies

Imported Objects

Objects

42 total
Object Name
alcatelIND1PPPoEIAMIBThis module describes an authoritative enterprise- specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line PPPoE Intermediate Agent. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
MODULE-IDENTITY
.1
alcatelIND1PPPoEIAMIBObjectsBranch For PPPoE Intermediate Agent Subsystem Managed Objects.
OBJECT IDENTIFIER
.1.1
alaPPPoEIAGlobalStatusDefines the global status for PPPoE Intermediate Agent. Indicates whether the PPPoE Intermediate Agent is enabled/disabled on the switch.rw
Enumeration
.1.1.1
alaPPPoEIAGlobalAccessNodeIDFormatTypeDefines the format type for Access Node Identifier.rw
Enumeration
.1.1.2
alaPPPoEIAGlobalAccessNodeIDStringValueDefines the value of string that will be used in Access Node Identifier.rw
SnmpAdminString
.1.1.3
alaPPPoEIAGlobalCircuitIDFormatTypeDefines the format type for CircuitID. If format is default(1), the CircuitID is encoded as 'access-node-id eth slot/port:vlan'. If format is ascii(2), CircuitID is encoded as all the CircuitID fields separated by delimiter upto a maximum of 63 chars. If format is atm(3),the CircuitID is encoded as 'access-node-id atm rack/sub-rack/slot/port:svlan.cvlan'.Here rack/sub-rack will be always 0/0rw
Enumeration
.1.1.4
alaPPPoEIAGlobalCircuitIDField1The type of the first field in the PPPoEIA CircuitID in ASCII format.rw
PPPoEIACircuitIDFieldType
.1.1.5
alaPPPoEIAGlobalCircuitIDField1StrValThe string value of the first field in the PPPoEIA CircuitID in ASCII format.rw
SnmpAdminString
.1.1.6
alaPPPoEIAGlobalCircuitIDField2The type of the second field in the PPPoEIA CircuitID in ASCII format.rw
PPPoEIACircuitIDFieldType
.1.1.7
alaPPPoEIAGlobalCircuitIDField2StrValThe string value of the second field in the PPPoEIA CircuitID in ASCII format.rw
SnmpAdminString
.1.1.8
alaPPPoEIAGlobalCircuitIDField3The type of the third field in the PPPoEIA CircuitID in ASCII format.rw
PPPoEIACircuitIDFieldType
.1.1.9
alaPPPoEIAGlobalCircuitIDField3StrValThe string value of the third field in the PPPoEIA CircuitID in ASCII format.rw
SnmpAdminString
.1.1.10
alaPPPoEIAGlobalCircuitIDField4The type of the fourth field in the PPPoEIA CircuitID in ASCII format.rw
PPPoEIACircuitIDFieldType
.1.1.11
alaPPPoEIAGlobalCircuitIDField4StrValThe string value of the fourth field in the PPPoEIA CircuitID in ASCII format.rw
SnmpAdminString
.1.1.12
alaPPPoEIAGlobalCircuitIDField5The type of the fifth field in the PPPoEIA CircuitID in ASCII format.rw
PPPoEIACircuitIDFieldType
.1.1.13
alaPPPoEIAGlobalCircuitIDField5StrValThe string value of the fifth field in the PPPoEIA CircuitID in ASCII format.rw
SnmpAdminString
.1.1.14
alaPPPoEIAGlobalCircuitIDDelimiterThe value of the delimiter that is inserted between the fields in the PPPoEIA CircuitID in ASCII format. The allowed delimiters are :, |, /, \, -, _, , #, ., , and ; The default value of the delimiter is ':'rw
OCTET STRING
.1.1.15
alaPPPoEIAGlobalRemoteIDFormatTypeDefines the format type for the Remote Identifier.rw
Enumeration
.1.1.16
alaPPPoEIAGlobalRemoteIDStringValueDefines the value of the string that will be used in Remote Identifier.rw
SnmpAdminString
.1.1.17
alaPPPoEIAGlobalClearStatsDefines the global clear statistics control for PPPoE Intermediate Agent The value reset (1) indicates that clear all statistic counters.rw
Enumeration
.1.1.18
alaPPPoEIAPortConfig
OBJECT IDENTIFIER
.1.1.19
alaPPPoEIAPortConfigTableDefines the PPPoE Intermediate Agent port config table for providing, via SNMP, the capability of performing PPPoE Intermediate Agent operation.
SEQUENCE OF AlaPPPoEIAPortConfigEntry
.1.1.19.1
alaPPPoEIAPortConfigEntryThe Port Config table entry
AlaPPPoEIAPortConfigEntry
.1.1.19.1.1
alaPPPoEIAPortConfigIfIndexThe ifIndex subindex identifying this instance.
InterfaceIndex (IF-MIB)
.1.1.19.1.1.1
alaPPPoEIAPortConfigStatusIndicates whether the PPPoE Intermediate Agent is enabled on the port.rw
Enumeration
.1.1.19.1.1.2
alaPPPoEIAPortConfigTrustModeThis allows user to configure the Trust Port.rw
Enumeration
.1.1.19.1.1.3
alaPPPoEIAStats
OBJECT IDENTIFIER
.1.1.20
alaPPPoEIAStatsTableThis table contains the statistics of the tests performed for PPPoEIA.
SEQUENCE OF AlaPPPoEIAStatsEntry
.1.1.20.1
alaPPPoEIAStatsEntryThe test result's stats table.
AlaPPPoEIAStatsEntry
.1.1.20.1.1
alaPPPoEIAStatsIfIndexThe ifindex of the port on which PPPoE Intermediate Agent is enabled.
InterfaceIndex (IF-MIB)
.1.1.20.1.1.1
alaPPPoEIAStatsClearStatsDefines the clear statistics control for PPPoEIA for client ports. The value reset (1) indicates that clear all statistic counters.rw
Enumeration
.1.1.20.1.1.2
alaPPPoEIAStatsPADIRxCounterThe number of the PPPoE Active Discovery Initiation Packets received on client ports.ro
Counter32
.1.1.20.1.1.3
alaPPPoEIAStatsPADRRxCounterThe number of the PPPoE Active Discovery Request Packets received on client ports.ro
Counter32
.1.1.20.1.1.4
alaPPPoEIAStatsPADTRxCounterThe number of the PPPoE Active Discovery Termination Packets received on client ports.ro
Counter32
.1.1.20.1.1.5
alaPPPoEIAStatsPADIRxDiscardCounterThe number of the PPPoE Active Discovery Initiation Packets received and discarded on client ports.ro
Counter32
.1.1.20.1.1.6
alaPPPoEIAStatsPADRRxDiscardCounterThe number of the PPPoE Active Discovery Request Packets received and discarded on client ports.ro
Counter32
.1.1.20.1.1.7
alaPPPoEIAStatsPADTRxDiscardCounterThe number of the PPPoE Active Discovery Termination Packets received and discarded on client ports.ro
Counter32
.1.1.20.1.1.8
alaPPPoEIAStatsPADORxDiscardCounterThe number of the PPPoE Active Discovery Offer Packets received and discarded on client ports.ro
Counter32
.1.1.20.1.1.9
alaPPPoEIAStatsPADSRxDiscardCounterThe number of the PPPoE Active Discovery Session Confirmation Packets received and discarded on client ports.ro
Counter32
.1.1.20.1.1.10
alcatelIND1PPPoEIAMIBConformanceBranch for PPPoE Intermediate Agent Module MIB Subsystem Conformance Information.
OBJECT IDENTIFIER
.1.2
alcatelIND1PPPoEIAMIBGroupsBranch for PPPoE Intermediate Agent Module MIB Subsystem Units of Conformance.
OBJECT IDENTIFIER
.1.2.1
alcatelIND1PPPoEIAMIBCompliancesBranch for PPPoE Intermediate Agent Module MIB Subsystem Compliance Statements.
OBJECT IDENTIFIER
.1.2.2