ALCATEL-IND1-PIM-STD-MIB
AI MIB Summary
The ALCATEL-IND1-PIM-STD-MIB enables the configuration and monitoring of Protocol Independent Multicast (PIM) router parameters on Alcatel-Lucent hardware, specifically tracking PIM neighbor adjacencies, interface states, and multicast group membership tables based on the IETF PIM MIB v2 specification.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for the configuration of PIM routers. This MIB is based on the Internet Draft <draft-ietf-pim-mib-v2-10.txt> developed by the IETF PIM Working Group.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alaPimStdMIB.1.3.6.1.4.1.6486.801.1.2.1.10.6.2
213
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
213 total| Object Name |
|---|
alaPimStdMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of PIM routers. This MIB is based on the
Internet Draft <draft-ietf-pim-mib-v2-10.txt> developed by
the IETF PIM Working Group.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.10.6.2 |
alaPimNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0 |
alaPimNeighborLossA alaPimNeighborLoss notification signifies the loss of an
adjacency with a neighbor. This notification should be
generated when the neighbor timer expires, and the router
has no other neighbors on the same interface with the same
IP version and a lower IP address than itself.
This notification is generated whenever the counter
alaPimNeighborLossCount is incremented, subject
to the rate limit specified by
alaPimNeighborLossNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.1 |
alaPimInvalidRegisterA alaPimInvalidRegister notification signifies that an invalid
PIM Register message was received by this device.
This notification is generated whenever the counter
alaPimInvalidRegisterMsgsRcvd is incremented, subject to the
rate limit specified by
alaPimInvalidRegisterNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.2 |
alaPimInvalidJoinPruneA alaPimInvalidJoinPrune notification signifies that an
invalid PIM Join/Prune message was received by this device.
This notification is generated whenever the counter
alaPimInvalidJoinPruneMsgsRcvd is incremented, subject to the
rate limit specified by
alaPimInvalidJoinPruneNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.3 |
alaPimRPMappingChangeA alaPimRPMappingChange notification signifies a change to the
active RP mapping on this device.
This notification is generated whenever the counter
alaPimRPMappingChangeCount is incremented, subject to the
rate limit specified by
alaPimRPMappingChangeNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.4 |
alaPimInterfaceElectionA alaPimInterfaceElection notification signifies that a new DR
or DR has been elected on a network.
This notification is generated whenever the counter
alaPimInterfaceElectionsWinCount is incremented, subject to the
rate limit specified by
alaPimInterfaceElectionNotificationPeriod. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.0.5 |
alaPim OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1 |
alaPimInterfaceTableThe (conceptual) table listing the router's PIM interfaces.
PIM is enabled on all interfaces listed in this table. SEQUENCE OF AlaPimInterfaceEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1 |
alaPimInterfaceEntryAn entry (conceptual row) in the alaPimInterfaceTable. This
entry is preserved on agent restart. AlaPimInterfaceEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1 |
alaPimInterfaceIfIndexThe ifIndex value of this PIM interface. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.1 |
alaPimInterfaceIPVersionThe IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g. IPv4
and IPv6, however the traffic is considered to be logically
separate. InetVersion (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.2 |
alaPimInterfaceAddressTypeThe address type of this PIM interface.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.3 |
alaPimInterfaceAddressThe primary IP address of this router on this PIM
interface. The InetAddressType is given by the
alaPimInterfaceAddressType object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.4 |
alaPimInterfaceGenerationIDValueThe value of the Generation ID this router inserted in the
last PIM Hello message it sent on this interface.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.5 |
alaPimInterfaceDRThe primary IP address of the Designated Router on this PIM
interface. The InetAddressType is given by the
alaPimInterfaceAddressType object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.6 |
alaPimInterfaceDRPriorityThe Designated Router Priority value inserted into the DR
Priority option on this interface. Numerically higher
values for this object indicate higher priorities.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.7 |
alaPimInterfaceDRPriorityEnabledEvaluates to TRUE if all routers on this interface are
using the DR Priority option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.8 |
alaPimInterfaceHelloIntervalThe frequency at which PIM Hello messages are transmitted
on this interface. This object corresponds to the
'Hello_Period' timer value defined in the PIM-SM
specification. A value of zero represents an 'infinite'
interval, and indicates that periodic PIM Hello messages
should not be sent on this interface.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.9 |
alaPimInterfaceTrigHelloIntervalThe maximum time before this router sends a triggered PIM
Hello message on this interface. This object corresponds to
the 'Trigered_Hello_Delay' timer value defined in the PIM-SM
specification. A value of zero has no special meaning and
indicates that triggered PIM Hello messages should always be
sent immediately.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.10 |
alaPimInterfaceHelloHoldtimeThe value set in the Holdtime field of PIM Hello messages
transmitted on this interface. A value of 65535 represents
an 'infinite' holdtime. Implementations are recommended
to use a holdtime that is 3.5 times the value of
alaPimInterfaceHelloInterval, or 65535 if
alaPimInterfaceHelloInterval is set to zero.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.11 |
alaPimInterfaceJoinPruneIntervalThe frequency at which this router sends PIM Join/Prune
messages on this PIM interface. This object corresponds to
the 't_periodic' timer value defined in the PIM-SM
specification. A value of zero represents an 'infinite'
interval, and indicates that periodic PIM Join/Prune
messages should not be sent on this interface.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.12 |
alaPimInterfaceJoinPruneHoldtimeThe value inserted into the Holdtime field of a PIM
Join/Prune message sent on this interface. A value of 65535
represents an 'infinite' holdtime. Implementations are
recommended to use a holdtime that is 3.5 times the value of
alaPimInterfaceJoinPruneInterval, or 65535 if
alaPimInterfaceJoinPruneInterval is set to zero. PIM-DM
implementations are recommended to use the value of
alaPimInterfacePruneLimitInterval.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.13 |
alaPimInterfaceDFElectionRobustnessThe minimum number of PIM DF-Election messages that must be
lost in order for DF election on this interface to fail.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.14 |
alaPimInterfaceLanDelayEnabledEvaluates to TRUE if all routers on this interface are
using the LAN Prune Delay option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.15 |
alaPimInterfacePropagationDelayThe expected propagation delay between PIM routers on this
network or link.
This router inserts this value into the Propagation_Delay
field of the LAN Prune Delay option in the PIM Hello
messages sent on this interface. Implementations should
enforce a lower bound on the permitted values for this
object to allow for scheduling and processing delays within
the local router.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.16 |
alaPimInterfaceOverrideIntervalThe value this router inserts into the Override_Interval
field of the LAN Prune Delay option in the PIM Hello
messages it sends on this interface.
When overriding a prune, PIM routers pick a random timer
duration up to the value of this object. The more PIM
routers that are active on a network, the more likely it is
that the prune will be overridden after a small proportion
of this time has elapsed.
The more PIM routers are active on this network, the larger
this object should be to obtain an optimal spread of prune
override latencies.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.17 |
alaPimInterfaceEffectPropagDelayThe Effective Propagation Delay on this interface. This
object is always 500 if alaPimInterfaceLanDelayEnabled is
FALSE.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.18 |
alaPimInterfaceEffectOverrideIvlThe Effective Override Interval on this interface. This
object is always 2500 if alaPimInterfaceLanDelayEnabled is
FALSE.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.19 |
alaPimInterfaceSuppressionEnabledWhether join suppression is enabled on this interface.
This object is always TRUE if alaPimInterfaceLanDelayEnabled is
FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.20 |
alaPimInterfaceBidirCapableEvaluates to TRUE if all routers on this interface are
using the Bidirectional-PIM Capable option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.21 |
alaPimInterfaceDomainBorderWhether or not this interface is a PIM domain border. This
includes acting as a border for PIM Bootstrap Router (BSR)
messages, if the BSR mechanism is in use.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.22 |
alaPimInterfaceStubInterfaceWhether this interface is a 'stub interface'. If this
object is set to TRUE, then no PIM packets are sent out this
interface, and any received PIM packets are ignored.
Setting this object to TRUE is a security measure for
interfaces towards untrusted hosts. This allows an
interface to be configured for use with IGMP (Internet Group
Management Protocol) or MLD (Multicast Listener Discovery)
only, which protects the PIM router from forged PIM messages
on the interface.
To communicate with other PIM routers using this interface,
this object must remain set to FALSE.
Changing the value of this object while the interface is
operational causes the interface to be deactivated and
then reactivated.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.23 |
alaPimInterfacePruneLimitIntervalThe minimum interval that must transpire between two
successive Prunes sent by a router. This object corresponds
to the 't_limit' timer value defined in the PIM-DM
specification. This object is used only by PIM-DM.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.24 |
alaPimInterfaceGraftRetryIntervalThe minimum interval that must transpire between two
successive Grafts sent by a router. This object corresponds
to the 'Graft_Retry_Period' timer value defined in the
PIM-DM specification. This object is used only by PIM-DM.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.25 |
alaPimInterfaceSRPriorityEnabledEvaluates to TRUE if all routers on this interface are
using the State Refresh option. This object is used only by
PIM-DM.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.26 |
alaPimInterfaceStatusThe status of this entry. Creating the entry enables PIM
on the interface; destroying the entry disables PIM on the
interface.
This status object can be set to active(1) without setting
any other columnar objects in this entry.
All writeable objects in this entry can be modified when the
status of this entry is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.27 |
alaPimInterfaceStorageTypeThe storage type for this row. Rows having the value
'permanent' need not allow write-access to any columnar
objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.1.1.28 |
alaPimNeighborTableThe (conceptual) table listing the router's PIM neighbors. SEQUENCE OF AlaPimNeighborEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2 |
alaPimNeighborEntryAn entry (conceptual row) in the alaPimNeighborTable. AlaPimNeighborEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1 |
alaPimNeighborIfIndexThe value of ifIndex for the interface used to reach this
PIM neighbor. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.1 |
alaPimNeighborAddressTypeThe address type of this PIM neighbor. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.2 |
alaPimNeighborAddressThe primary IP address of this PIM neighbor. The
InetAddressType is given by the alaPimNeighborAddressType
object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.3 |
alaPimNeighborGenerationIDPresentEvaluates to TRUE if this neighbor is using the Generation
ID option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.4 |
alaPimNeighborGenerationIDValueThe value of the Generation ID from the last PIM Hello
message received from this neighbor. This object is always
zero if alaPimNeighborGenerationIDPresent is FALSE.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.5 |
alaPimNeighborUpTimeThe time since this PIM neighbor (last) became a neighbor
of the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.6 |
alaPimNeighborExpiryTimeThe minimum time remaining before this PIM neighbor will
be aged out. The value zero indicates that this PIM
neighbor will never be aged out.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.7 |
alaPimNeighborDRPriorityPresentEvaluates to TRUE if this neighbor is using the DR Priority
option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.8 |
alaPimNeighborDRPriorityThe value of the Designated Router Priority from the last
PIM Hello message received from this neighbor. This object
is always zero if alaPimNeighborDRPriorityPresent is FALSE.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.9 |
alaPimNeighborLanPruneDelayPresentEvaluates to TRUE if this neighbor is using the LAN Prune
Delay option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.10 |
alaPimNeighborTBitWhether the T bit was set in the LAN Prune Delay option
received from this neighbor. The T bit specifies the
ability of the neighbor to disable join suppression. This
object is always TRUE if alaPimNeighborLanPruneDelayPresent is
FALSE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.11 |
alaPimNeighborPropagationDelayThe value of the Propagation_Delay field of the LAN Prune
Delay option received from this neighbor. This object is
always zero if alaPimNeighborLanPruneDelayPresent is FALSE.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.12 |
alaPimNeighborOverrideIntervalThe value of the Override_Interval field of the LAN Prune
Delay option received from this neighbor. This object is
always zero if alaPimNeighborLanPruneDelayPresent is FALSE.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.13 |
alaPimNeighborBidirCapableEvaluates to TRUE if this neighbor is using the
Bidirectional-PIM Capable option.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.14 |
alaPimNeighborSRCapableEvaluates to TRUE if this neighbor is using the State
Refresh Capable option. This object is used only by
PIM-DM.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.2.1.15 |
alaPimNbrSecAddressTableThe (conceptual) table listing the secondary addresses
advertised by each PIM neighbor (on a subset of the rows of
the alaPimNeighborTable defined above). SEQUENCE OF AlaPimNbrSecAddressEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3 |
alaPimNbrSecAddressEntryAn entry (conceptual row) in the alaPimNbrSecAddressTable. AlaPimNbrSecAddressEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1 |
alaPimNbrSecAddressIfIndexThe value of ifIndex for the interface used to reach this
PIM neighbor. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1.1 |
alaPimNbrSecAddressTypeThe address type of this PIM neighbor. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1.2 |
alaPimNbrSecAddressPrimaryThe primary IP address of this PIM neighbor. The
InetAddressType is given by the alaPimNbrSecAddressType
object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1.3 |
alaPimNbrSecAddressThe secondary IP address of this PIM neighbor. The
InetAddressType is given by the alaPimNbrSecAddressType
object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.3.1.4 |
alaPimStarGTableThe (conceptual) table listing the non-interface specific
(*,G) state that PIM has. SEQUENCE OF AlaPimStarGEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4 |
alaPimStarGEntryAn entry (conceptual row) in the alaPimStarGTable. AlaPimStarGEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1 |
alaPimStarGAddressTypeThe address type of this multicast group. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.1 |
alaPimStarGGrpAddressThe multicast group address. The InetAddressType is given
by the alaPimStarGAddressType object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.2 |
alaPimStarGUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.3 |
alaPimStarGPimModeWhether this entry represents an ASM (Any Source Multicast,
used with PIM-SM) or BIDIR-PIM group.ro AlaPimMode .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.4 |
alaPimStarGRPAddressTypeThe address type of the Rendezvous Point (RP), or
unknown(0) if the RP address is unknown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.5 |
alaPimStarGRPAddressThe address of the Rendezvous Point (RP) for the group.
The InetAddressType is given by the alaPimStarGRPAddressType.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.6 |
alaPimStarGPimModeOriginThe mechanism by which the PIM mode and RP for the group
were learned.ro AlaPimGroupMappingOriginType .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.7 |
alaPimStarGRPIsLocalWhether the local router is the RP for the group.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.8 |
alaPimStarGUpstreamJoinStateWhether the local router should join the RP tree for the
group. This corresponds to the state of the upstream (*,G)
state machine in the PIM-SM specification.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.9 |
alaPimStarGUpstreamJoinTimerThe time remaining before the local router next sends a
periodic (*,G) Join message on alaPimStarGRPFIfIndex. This
timer is called the (*,G) Upstream Join Timer in the PIM-SM
specification. This object is zero if the timer is not
running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.10 |
alaPimStarGUpstreamNeighborTypeThe primary address type of the upstream neighbor, or
unknown(0) if the upstream neighbor address is unknown or is
not a PIM neighbor.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.11 |
alaPimStarGUpstreamNeighborThe primary address of the neighbor on alaPimStarGRPFIfIndex
that the local router is sending periodic (*,G) Join
messages to. The InetAddressType is given by the
alaPimStarGUpstreamNeighborType object. This address is called
RPF'(*,G) in the PIM-SM specification.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.12 |
alaPimStarGRPFIfIndexThe value of ifIndex for the RPF interface towards the RP,
or zero if the RPF interface is unknown.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.13 |
alaPimStarGRPFNextHopTypeThe address type of the RPF next hop towards the RP, or
unknown(0) if the RPF next hop is unknown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.14 |
alaPimStarGRPFNextHopThe address of the RPF next hop towards the RP. The
InetAddressType is given by the alaPimStarGRPFNextHopType
object. This address is called MRIB.next_hop(RP(G))
in the PIM-SM specification.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.15 |
alaPimStarGRPFRouteProtocolThe routing mechanism via which the route used to find the
RPF interface towards the RP was learned.ro IANAipRouteProtocol (IANA-RTPROTO-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.16 |
alaPimStarGRPFRouteAddressThe IP address which when combined with the corresponding
value of alaPimStarGRPFRoutePrefixLength identifies the route
used to find the RPF interface towards the RP. The
InetAddressType is given by the alaPimStarGRPFNextHopType
object.
This address object is only significant up to
alaPimStarGRPFRoutePrefixLength bits. The remainder of the
address bits are zero.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.17 |
alaPimStarGRPFRoutePrefixLengthThe prefix length which when combined with the
corresponding value of alaPimStarGRPFRouteAddress identifies
the route used to find the RPF interface towards the RP.
The InetAddressType is given by the alaPimStarGRPFNextHopType
object.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.18 |
alaPimStarGRPFRouteMetricPrefThe metric preference of the route used to find the RPF
interface towards the RP.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.19 |
alaPimStarGRPFRouteMetricThe routing metric of the route used to find the RPF
interface towards the RP.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.4.1.20 |
alaPimStarGITableThe (conceptual) table listing the interface-specific (*,G)
state that PIM has. SEQUENCE OF AlaPimStarGIEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5 |
alaPimStarGIEntryAn entry (conceptual row) in the alaPimStarGITable. AlaPimStarGIEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1 |
alaPimStarGIIfIndexThe ifIndex of the interface that this entry corresponds
to. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.1 |
alaPimStarGIUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.2 |
alaPimStarGILocalMembershipWhether the local router has (*,G) local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_include(*,G,I) in the
PIM-SM specification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.3 |
alaPimStarGIJoinPruneStateThe state resulting from (*,G) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (*,G) state machine in the
PIM-SM specification.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.4 |
alaPimStarGIPrunePendingTimerThe time remaining before the local router acts on a (*,G)
Prune message received on this interface, during which the
router is waiting to see whether another downstream router
will override the Prune message. This timer is called the
(*,G) Prune-Pending Timer in the PIM-SM specification. This
object is zero if the timer is not running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.5 |
alaPimStarGIJoinExpiryTimerThe time remaining before (*,G) Join state for this
interface expires. This timer is called the (*,G) Join
Expiry Timer in the PIM-SM specification. This object is
zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.6 |
alaPimStarGIAssertStateThe (*,G) Assert state for this interface. This
corresponds to the state of the per-interface (*,G) Assert
state machine in the PIM-SM specification. If
alaPimStarGPimMode is 'bidir', this object must be 'noInfo'.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.7 |
alaPimStarGIAssertTimerIf alaPimStarGIAssertState is 'iAmAssertWinner', this is the
time remaining before the local router next sends a (*,G)
Assert message on this interface. If alaPimStarGIAssertState
is 'iAmAssertLoser', this is the time remaining before the
(*,G) Assert state expires. If alaPimStarGIAssertState is
'noInfo', this is zero. This timer is called the (*,G)
Assert Timer in the PIM-SM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.8 |
alaPimStarGIAssertWinnerAddressTypeIf alaPimStarGIAssertState is 'iAmAssertLoser', this is the
address type of the assert winner; otherwise, this object is
unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.9 |
alaPimStarGIAssertWinnerAddressIf alaPimStarGIAssertState is 'iAmAssertLoser', this is the
address of the assert winner. The InetAddressType is given
by the alaPimStarGIAssertWinnerAddressType object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.10 |
alaPimStarGIAssertWinnerMetricPrefIf alaPimStarGIAssertState is 'iAmAssertLoser', this is the
metric preference of the route to the RP advertised by the
assert winner; otherwise, this object is zero.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.11 |
alaPimStarGIAssertWinnerMetricIf alaPimStarGIAssertState is 'iAmAssertLoser', this is the
routing metric of the route to the RP advertised by the
assert winner; otherwise, this object is zero.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.5.1.12 |
alaPimSGTableThe (conceptual) table listing the non-interface specific
(S,G) state that PIM has. SEQUENCE OF AlaPimSGEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6 |
alaPimSGEntryAn entry (conceptual row) in the alaPimSGTable. AlaPimSGEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1 |
alaPimSGAddressTypeThe address type of the source and multicast group for this
entry. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.1 |
alaPimSGGrpAddressThe multicast group address for this entry. The
InetAddressType is given by the alaPimSGAddressType object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.2 |
alaPimSGSrcAddressThe source address for this entry. The InetAddressType is
given by the alaPimSGAddressType object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.3 |
alaPimSGUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.4 |
alaPimSGPimModeWhether alaPimSGGrpAddress is an SSM (Source Specific
Multicast, used with PIM-SM) or ASM (Any Source Multicast,
used with PIM-SM), or DM (Dense Mode) group.ro AlaPimMode .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.5 |
alaPimSGUpstreamJoinStateWhether the local router should join the shortest-path tree
for the source and group represented by this entry. This
corresponds to the state of the upstream (S,G) state machine
in the PIM-SM specification.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.6 |
alaPimSGUpstreamJoinTimerThe time remaining before the local router next sends a
periodic (S,G) Join message on alaPimSGRPFIfIndex. This timer
is called the (S,G) Upstream Join Timer in the PIM-SM
specification. This object is zero if the timer is not
running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.7 |
alaPimSGUpstreamNeighborThe primary address of the neighbor on alaPimSGRPFIfIndex that
the local router is sending periodic (S,G) Join messages to.
This is zero if the RPF next hop is unknown or is not a
PIM neighbor. The InetAddressType is given by the
alaPimSGAddressType object. This address is called RPF'(S,G)
in the PIM-SM specification.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.8 |
alaPimSGRPFIfIndexThe value of ifIndex for the RPF interface towards the
source, or zero if the RPF interface is unknown.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.9 |
alaPimSGRPFNextHopTypeThe address type of the RPF next hop towards the source, or
unknown(0) if the RPF next hop is unknown.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.10 |
alaPimSGRPFNextHopThe address of the RPF next hop towards the source. The
InetAddressType is given by the alaPimSGRPFNextHopType. This
address is called MRIB.next_hop(S) in the PIM-SM
specification.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.11 |
alaPimSGRPFRouteProtocolThe routing mechanism via which the route used to find the
RPF interface towards the source was learned.ro IANAipRouteProtocol (IANA-RTPROTO-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.12 |
alaPimSGRPFRouteAddressThe IP address which when combined with the corresponding
value of alaPimSGRPFRoutePrefixLength identifies the route used
to find the RPF interface towards the source. The
InetAddressType is given by the alaPimSGRPFNextHopType object.
This address object is only significant up to
alaPimSGRPFRoutePrefixLength bits. The remainder of the
address bits are zero.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.13 |
alaPimSGRPFRoutePrefixLengthThe prefix length which when combined with the
corresponding value of alaPimSGRPFRouteAddress identifies the
route used to find the RPF interface towards the source.
The InetAddressType is given by the alaPimSGRPFNextHopType
object.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.14 |
alaPimSGRPFRouteMetricPrefThe metric preference of the route used to find the RPF
interface towards the source.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.15 |
alaPimSGRPFRouteMetricThe routing metric of the route used to find the RPF
interface towards the source.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.16 |
alaPimSGSPTBitWhether the SPT bit is set; and therefore whether
forwarding is taking place on the shortest-path tree.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.17 |
alaPimSGKeepaliveTimerThe time remaining before, in the absence of explicit (S,G)
local membership or (S,G) Join messages received to maintain
it, this (S,G) state expires. This timer is called the
(S,G) Keepalive Timer in the PIM-SM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.18 |
alaPimSGDRRegisterStateWhether the local router should encapsulate (S,G) data
packets in Register messages and send them to the RP. This
corresponds to the state of the per-(S,G) Register state
machine in the PIM-SM specification. This object is always
'noInfo' unless alaPimSGPimMode is 'asm'.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.19 |
alaPimSGDRRegisterStopTimerIf alaPimSGDRRegisterState is 'prune', this is the time
remaining before the local router sends a Null-Register
message to the RP. If alaPimSGDRRegisterState is
'joinPending', this is the time remaining before the local
router resumes encapsulating data packets and sending them
to the RP. Otherwise, this is zero. This timer is called
the Register-Stop Timer in the PIM-SM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.20 |
alaPimSGRPRegisterPMBRAddressTypeThe address type of the first PIM Multicast Border Router
to send a Register message with the Border bit set. This
object is unknown(0) if the local router is not the RP for
the group.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.21 |
alaPimSGRPRegisterPMBRAddressThe IP address of the first PIM Multicast Border Router to
send a Register message with the Border bit set. The
InetAddressType is given by the
alaPimSGRPRegisterPMBRAddressType object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.22 |
alaPimSGUpstreamPruneStateWhether the local router has pruned itself from the tree.
This corresponds to the state of the upstream prune (S,G)
state machine in the PIM-DM specification. This object is
used only by PIM-DM.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.23 |
alaPimSGUpstreamPruneLimitTimerThe time remaining before the local router may send a (S,G)
Prune message on alaPimSGRPFIfIndex. This timer is called the
(S,G) Prune Limit Timer in the PIM-DM specification. This
object is zero if the timer is not running. This object is
used only by PIM-DM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.24 |
alaPimSGOriginatorStateWhether the router is an originator for an (S,G) message
flow. This corresponds to the state of the per-(S,G)
Originator state machine in the PIM-DM specification. This
object is used only by PIM-DM.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.25 |
alaPimSGSourceActiveTimerIf alaPimSGOriginatorState is 'originator', this is the time
remaining before the local router reverts to a notOriginator
state. Otherwise, this is zero. This timer is called the
Source Active Timer in the PIM-DM specification. This
object is used only by PIM-DM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.26 |
alaPimSGStateRefreshTimerIf alaPimSGOriginatorState is 'originator', this is the time
remaining before the local router sends a State Refresh
message. Otherwise, this is zero. This timer is called the
State Refresh Timer in the PIM-DM specification. This
object is used only by PIM-DM.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.6.1.27 |
alaPimSGITableThe (conceptual) table listing the interface-specific (S,G)
state that PIM has. SEQUENCE OF AlaPimSGIEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7 |
alaPimSGIEntryAn entry (conceptual row) in the alaPimSGITable. AlaPimSGIEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1 |
alaPimSGIIfIndexThe ifIndex of the interface that this entry corresponds
to. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.1 |
alaPimSGIUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.2 |
alaPimSGILocalMembershipWhether the local router has (S,G) local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_include(S,G,I) in the
PIM-SM specification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.3 |
alaPimSGIJoinPruneStateThe state resulting from (S,G) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (S,G) state machine in the
PIM-SM and PIM-DM specification.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.4 |
alaPimSGIPrunePendingTimerThe time remaining before the local router acts on an (S,G)
Prune message received on this interface, during which the
router is waiting to see whether another downstream router
will override the Prune message. This timer is called the
(S,G) Prune-Pending Timer in the PIM-SM specification. This
object is zero if the timer is not running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.5 |
alaPimSGIJoinExpiryTimerThe time remaining before (S,G) Join state for this
interface expires. This timer is called the (S,G) Join
Expiry Timer in the PIM-SM specification. This object is
zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time. This timer is called the
(S,G) Prune Timer in the PIM-DM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.6 |
alaPimSGIAssertStateThe (S,G) Assert state for this interface. This
corresponds to the state of the per-interface (S,G) Assert
state machine in the PIM-SM specification.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.7 |
alaPimSGIAssertTimerIf alaPimSGIAssertState is 'iAmAssertWinner', this is the time
remaining before the local router next sends a (S,G) Assert
message on this interface. If alaPimSGIAssertState is
'iAmAssertLoser', this is the time remaining before the
(S,G) Assert state expires. If alaPimSGIAssertState is
'noInfo', this is zero. This timer is called the (S,G)
Assert Timer in the PIM-SM specification.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.8 |
alaPimSGIAssertWinnerAddressTypeIf alaPimSGIAssertState is 'iAmAssertLoser', this is the
address type of the assert winner; otherwise, this object is
unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.9 |
alaPimSGIAssertWinnerAddressIf alaPimSGIAssertState is 'iAmAssertLoser', this is the
address of the assert winner. The InetAddressType is given
by the alaPimSGIAssertWinnerAddressType object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.10 |
alaPimSGIAssertWinnerMetricPrefIf alaPimSGIAssertState is 'iAmAssertLoser', this is the
metric preference of the route to the source advertised by
the assert winner; otherwise, this object is zero.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.11 |
alaPimSGIAssertWinnerMetricIf alaPimSGIAssertState is 'iAmAssertLoser', this is the
routing metric of the route to the source advertised by the
assert winner; otherwise, this object is zero.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.7.1.12 |
alaPimSGRptTableThe (conceptual) table listing the non-interface specific
(S,G,rpt) state that PIM has. SEQUENCE OF AlaPimSGRptEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8 |
alaPimSGRptEntryAn entry (conceptual row) in the alaPimSGRptTable. AlaPimSGRptEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1 |
alaPimSGRptSrcAddressThe source address for this entry. The InetAddressType is
given by the alaPimStarGAddressType object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1.1 |
alaPimSGRptUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1.2 |
alaPimSGRptUpstreamPruneStateWhether the local router should prune the source off the RP
tree. This corresponds to the state of the upstream
(S,G,rpt) state machine for triggered messages in the PIM-SM
specification.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1.3 |
alaPimSGRptUpstreamOverrideTimerThe time remaining before the local router sends a
triggered (S,G,rpt) Join message on alaPimStarGRPFIfIndex.
This timer is called the (S,G,rpt) Upstream Override Timer
in the PIM-SM specification. This object is zero if the
timer is not running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.8.1.4 |
alaPimSGRptITableThe (conceptual) table listing the interface-specific
(S,G,rpt) state that PIM has. SEQUENCE OF AlaPimSGRptIEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9 |
alaPimSGRptIEntryAn entry (conceptual row) in the alaPimSGRptITable. AlaPimSGRptIEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1 |
alaPimSGRptIIfIndexThe ifIndex of the interface that this entry corresponds
to. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.1 |
alaPimSGRptIUpTimeThe time since this entry was created by the local router.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.2 |
alaPimSGRptILocalMembershipWhether the local router has both (*,G) include local
membership and (S,G) exclude local membership on this
interface (resulting from a mechanism such as IGMP or MLD).
This corresponds to local_receiver_exclude(S,G,I) in the
PIM-SM specification.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.3 |
alaPimSGRptIJoinPruneStateThe state resulting from (S,G,rpt) Join/Prune messages
received on this interface. This corresponds to the state
of the downstream per-interface (S,G,rpt) state machine in
the PIM-SM specification.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.4 |
alaPimSGRptIPrunePendingTimerThe time remaining before the local router starts pruning
this source off the RP tree. This timer is called the
(S,G,rpt) Prune-Pending Timer in the PIM-SM specification.
This object is zero if the timer is not running.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.5 |
alaPimSGRptIPruneExpiryTimerThe time remaining before (S,G,rpt) Prune state for this
interface expires. This timer is called the (S,G,rpt)
Prune Expiry Timer in the PIM-SM specification. This object
is zero if the timer is not running. A value of 'FFFFFFFF'h
indicates an infinite expiry time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.9.1.6 |
alaPimStaticRPTableThis table is used to create and manage static
configuration of RPs.
If the group prefixes configured for two or more rows in
this table overlap, the row with the greatest value of
alaPimStaticRPGrpPrefixLength is used for the overlapping
range. SEQUENCE OF AlaPimStaticRPEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11 |
alaPimStaticRPEntryAn entry (conceptual row) in the alaPimStaticRPTable. This
entry is preserved on agent restart. AlaPimStaticRPEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1 |
alaPimStaticRPAddressTypeThe address type of this entry. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.1 |
alaPimStaticRPGrpAddressThe multicast group address which, when combined with
alaPimStaticRPGrpPrefixLength, gives the group prefix for this
entry. The InetAddressType is given by the
alaPimStaticRPAddressType object.
This address object is only significant up to
alaPimSGRPFRoutePrefixLength bits. The remainder of the
address bits are zero. This is especially important for
this index field, which is part of the index of this entry.
Any non-zero bits would signify an entirely different
entry. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.2 |
alaPimStaticRPGrpPrefixLengthThe multicast group prefix length, which, when combined
with alaPimStaticRPGrpAddress, gives the group prefix for this
entry. The InetAddressType is given by the
alaPimStaticRPAddressType object. If alaPimStaticRPAddressType is
'ipv4' or 'ipv4z', this object must be in the range 4..32.
If alaPimStaticRPGrpAddressType is 'ipv6' or 'ipv6z', this
object must be in the range 8..128. InetAddressPrefixLength .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.3 |
alaPimStaticRPRPAddressThe IP address of the RP to be used for groups within this
group prefix. The InetAddressType is given by the
alaPimStaticRPAddressType object.rw InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.4 |
alaPimStaticRPPimModeThe PIM mode to be used for groups in this group prefix.
If this object is set to ssm(2) or dm(5), then
alaPimStaticRPRPAddress must be set to zero. No RP
operations are ever possible for PIM Mode SSM or DM.rw AlaPimMode .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.5 |
alaPimStaticRPOverrideDynamicWhether this static RP configuration overrides RP
information learned dynamically for groups in this group
prefix.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.6 |
alaPimStaticRPPrecedenceThe value for alaPimGroupMappingPrecedence to be used for this
static RP configuration. This allows fine control over
which configuration is overridden by this static
configuration.
If alaPimStaticRPOverrideDynamic is set to TRUE, all dynamic RP
configuration is overridden by this static configuration,
whatever the value of this object.
The absolute values of this object have a significance only
on the local router and do not need to be coordinated with
other routers. A setting of this object may have different
effects when applied to other routers.
Do not use this object unless fine control of static RP
behavior on the local router is required.
A value of 65535 is used to represent an 'undefined' value
indicating that this object is not being used.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.7 |
alaPimStaticRPRowStatusThe status of this row, by which rows in this table can
be created and destroyed.
This status object cannot be set to active(1) before valid
values have been written to alaPimStaticRPRPAddress.
All writeable objects in this entry can be modified when the
status of this entry is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.8 |
alaPimStaticRPStorageTypeThe storage type for this row. Rows having the value
'permanent' need not allow write-access to any columnar
objects in the row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.11.1.9 |
alaPimGroupMappingTableThe (conceptual) table listing mappings from multicast
group prefixes to the PIM mode and RP address to use for
groups within that group prefix.
Rows in this table are created for a variety of reasons,
indicated by the value of the alaPimGroupMappingOrigin object.
- Rows with a alaPimGroupMappingOrigin value of 'fixed' are
created automatically by the router at startup, to
correspond to the well-defined prefixes of link-local and
unroutable group addresses. These rows are never
destroyed.
- Rows with a alaPimGroupMappingOrigin value of 'embedded' are
created by the router to correspond to group prefixes
that are to be treated as being in Embedded-RP format.
- Rows with a alaPimGroupMappingOrigin value of 'configRp' are
created and destroyed as a result of rows in the
alaPimStaticRPTable being created and destroyed.
- Rows with a alaPimGroupMappingOrigin value of 'configSsm'
are created and destroyed as a result of configuration of
SSM address ranges to the local router.
- Rows with a alaPimGroupMappingOrigin value of 'bsr' are
created as a result of running the PIM Bootstrap Router
(BSR) mechanism. If the local router is not the elected
BSR, these rows are created to correspond to group
prefixes in the PIM Bootstrap messages received from the
elected BSR. If the local router is the elected BSR,
these rows are created to correspond to group prefixes in
the PIM Bootstrap messages that the local router sends.
In either case, these rows are destroyed when the group
prefixes are timed out by the BSR mechanism.
- Rows with a alaPimGroupMappingOrigin value of 'other' are
created and destroyed according to some other mechanism
not specified here.
Given the collection of rows in this table at any point in
time, the PIM mode and RP address to use for a particular
group is determined using the following algorithm.
1. From the set of all rows, the subset whose group prefix
contains the group in question are selected.
2. If there are no such rows, the behavior is undefined.
3. From the selected subset of rows, the subset that have
the greatest value of alaPimGroupMappingGrpPrefixLength are
selected.
4. If there are multiple selected rows, and a subset are
defined by alaPimStaticRPTable (alaPimGroupMappingOrigin value
of 'configRp') with alaPimStaticRPOverrideDynanic set to
TRUE, then this subset is selected.
5. If there are still multiple selected rows, the subset
that have the highest precedence (the lowest numerical
value for alaPimGroupMappingPrecedence) are selected.
6. If there are still multiple selected rows, the row
selected is implementation dependent; the implementation
might or might not apply the PIM hash function to select
the row.
7. The group mode to use is given by the value of
alaPimGroupMappingPimMode from the single selected row; the
RP to use is given by the value of
alaPimGroupMappingRPAddress, unless alaPimGroupMappingOrigin is
'embedded', in which case the RP is extracted from the
group address in question. SEQUENCE OF AlaPimGroupMappingEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13 |
alaPimGroupMappingEntryAn entry (conceptual row) in the alaPimGroupMappingTable. AlaPimGroupMappingEntry .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1 |
alaPimGroupMappingOriginThe mechanism by which this group mapping was learned. AlaPimGroupMappingOriginType .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.1 |
alaPimGroupMappingAddressTypeThe address type of the IP multicast group prefix. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.2 |
alaPimGroupMappingGrpAddressThe IP multicast group address which, when combined with
alaPimGroupMappingGrpPrefixLength, gives the group prefix for
this mapping. The InetAddressType is given by the
alaPimGroupMappingAddressType object.
This address object is only significant up to
alaPimGroupMappingGrpPrefixLength bits. The remainder of the
address bits are zero. This is especially important for
this index field, which is part of the index of this entry.
Any non-zero bits would signify an entirely different
entry. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.3 |
alaPimGroupMappingGrpPrefixLengthThe multicast group prefix length, which, when combined
with alaPimGroupMappingGrpAddress, gives the group prefix for
this mapping. The InetAddressType is given by the
alaPimGroupMappingAddressType object. If
alaPimGroupMappingAddressType is 'ipv4' or 'ipv4z', this
object must be in the range 4..32. If
alaPimGroupMappingAddressType is 'ipv6' or 'ipv6z', this object
must be in the range 8..128. InetAddressPrefixLength .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.4 |
alaPimGroupMappingRPAddressTypeThe address type of the RP to be used for groups within
this group prefix, or unknown(0) if no RP is to be used or
if the RP address is unknown. This object must be
unknown(0) if alaPimGroupMappingPimMode is ssm(2) or dm(5), or if
alaPimGroupMappingOrigin is embedded(6). InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.5 |
alaPimGroupMappingRPAddressThe IP address of the RP to be used for groups within this
group prefix. The InetAddressType is given by the
alaPimGroupMappingRPAddressType object. InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.6 |
alaPimGroupMappingPimModeThe PIM mode to be used for groups in this group prefix.ro AlaPimMode .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.7 |
alaPimGroupMappingPrecedenceThe precedence of this row, used in the algorithm that
determines which row applies to a given group address
(described above). Numerically higher values for this
object indicate lower precedences, with the value zero
denoting the highest precedence.
The absolute values of this object have a significance only
on the local router and do not need to be coordinated with
other routers.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.13.1.8 |
alaPimKeepalivePeriodThe duration of the Keepalive Timer. This is the period
during which the PIM router will maintain (S,G) state in the
absence of explicit (S,G) local membership or (S,G) join
messages received to maintain it. This timer period is
called the Keepalive_Period in the PIM-SM specification. It
is called the SourceLifetime in the PIM-DM specification.
The storage type of this object is determined by
alaPimDeviceConfigStorageType.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.14 |
alaPimRegisterSuppressionTimeThe duration of the Register Suppression Timer. This is
the period during which a PIM Designated Router (DR) stops
sending Register-encapsulated data to the Rendezvous Point
(RP) after receiving a Register-Stop message. This object
is used to run timers both at the DR and at the RP. This
timer period is called the Register_Suppression_Time in the
PIM-SM specification.
The storage type of this object is determined by
alaPimDeviceConfigStorageType.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.15 |
alaPimStarGEntriesThe number of entries in the alaPimStarGTable.ro Gauge32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.16 |
alaPimStarGIEntriesThe number of entries in the alaPimStarGITable.ro Gauge32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.17 |
alaPimSGEntriesThe number of entries in the alaPimSGTable.ro Gauge32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.18 |
alaPimSGIEntriesThe number of entries in the alaPimSGITable.ro Gauge32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.19 |
alaPimSGRptEntriesThe number of entries in the alaPimSGRptTable.ro Gauge32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.20 |
alaPimSGRptIEntriesThe number of entries in the alaPimSGRptITable.ro Gauge32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.21 |
alaPimOutAssertsThe number of Asserts sent by this router.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.22 |
alaPimInAssertsThe number of Asserts received by this router. Asserts
are multicast to all routers on a network. This counter is
incremented by all routers that receive an assert, not only
those routers that are contesting the assert.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter64 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.23 |
alaPimLastAssertInterfaceThe interface on which this router most recently sent or
received an assert, or zero if this router has not sent or
received an assert.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.24 |
alaPimLastAssertGroupAddressTypeThe address type of the multicast group address in the most
recently sent or received assert. If this router has not
sent or received an assert then this object is set to
unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.25 |
alaPimLastAssertGroupAddressThe multicast group address in the most recently sent or
received assert. The InetAddressType is given by the
alaPimLastAssertGroupAddressType object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.26 |
alaPimLastAssertSourceAddressTypeThe address type of the multicast source address in the
most recently sent or received assert. If the most recent
assert was (*,G), or if this router has not sent or received
an assert, then this object is set to unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.27 |
alaPimLastAssertSourceAddressThe multicast source address in the most recently sent or
received assert. The InetAddressType is given by the
alaPimLastAssertSourceAddressType object.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.28 |
alaPimNeighborLossNotificationPeriodThe minimum time that must elapse between alaPimNeighborLoss
notifications originated by this router. The maximum value
65535 represents an 'infinite' time, in which case no
alaPimNeighborLoss traps are ever sent.
The storage type of this object is determined by
alaPimDeviceConfigStorageType.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.29 |
alaPimNeighborLossCountThe number of neighbor loss events that have occurred.
This count is incremented when the neighbor timer expires,
and the router has no other neighbors on the same interface
with the same IP version and a lower IP address than itself.
This counter is incremented whenever a alaPimNeighborLoss
notification would be generated.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.30 |
alaPimInvalidRegisterNotificationPeriodThe minimum time that must elapse between
alaPimInvalidRegister notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no alaPimInvalidRegister notifications are ever
sent.
The non-zero minimum allowed value provides resilience
against propagation of denial-of-service attacks from the
data and control planes to the network management plane.
The storage type of this object is determined by
alaPimDeviceConfigStorageType.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.31 |
alaPimInvalidRegisterMsgsRcvdThe number of invalid PIM Register messages that have been
received by this device.
A PIM Register message is invalid if either
o the destination address of the Register message does not
match the Group to RP mapping on this device, or
o this device believes the group address to be within an
SSM address range, but this Register implies ASM usage.
These conditions can occur transiently while RP mapping
changes propagate through the network. If this counter is
incremented repeatedly over several minutes, then there is a
persisting configuration error that requires correction.
The active Group to RP mapping on this device is specified
by the object alaPimGroupMappingPimMode. If there is no such
mapping, then the object alaPimGroupMappingPimMode is absent.
The RP address contained in the invalid Register is
alaPimInvalidRegisterRp.
Multicast data carried by invalid Register messages is
discarded. The discarded data is from a source directly
connected to alaPimInvalidRegisterOrigin, and is addressed to
alaPimInvalidRegisterGroup.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.32 |
alaPimInvalidRegisterAddressTypeThe address type stored in alaPimInvalidRegisterOrigin,
alaPimInvalidRegisterGroup and alaPimInvalidRegisterRp.
If no unexpected Register messages have been received, then
this object is set to unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.33 |
alaPimInvalidRegisterOriginThe source address of the last unexpected Register message
received by this device.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.34 |
alaPimInvalidRegisterGroupThe IP multicast group address to which the last unexpected
Register message received by this device was addressed.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.35 |
alaPimInvalidRegisterRpThe RP address to which the last unexpected Register
message received by this device was delivered.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.36 |
alaPimInvalidJoinPruneNotificationPeriodThe minimum time that must elapse between
alaPimInvalidJoinPrune notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no alaPimInvalidJoinPrune notifications are ever
sent.
The non-zero minimum allowed value provides resilience
against propagation of denial-of-service attacks from the
control plane to the network management plane.
The storage type of this object is determined by
alaPimDeviceConfigStorageType.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.37 |
alaPimInvalidJoinPruneMsgsRcvdThe number of invalid PIM Join/Prune messages that have
been received by this device.
A PIM Join/Prune message is invalid if either
o the Group to RP mapping specified by this message does not
match the Group to RP mapping on this device, or
o this device believes the group address to be within an
SSM address range, but this Join/Prune (*,G) or (S,G,rpt)
implies ASM usage.
These conditions can occur transiently while RP mapping
changes propagate through the network. If this counter is
incremented repeatedly over several minutes, then there is a
persisting configuration error that requires correction.
The active Group to RP mapping on this device is specified
by the object alaPimGroupMappingPimMode. If there is no such
mapping, then the object alaPimGroupMappingPimMode is absent.
The RP address contained in the invalid Join/Prune is
alaPimInvalidJoinPruneRp.
Invalid Join/Prune messages are discarded. This may result
in loss of multicast data affecting listeners downstream of
alaPimInvalidJoinPruneOrigin, for multicast data addressed to
alaPimInvalidJoinPruneGroup.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.38 |
alaPimInvalidJoinPruneAddressTypeThe address type stored in alaPimInvalidJoinPruneOrigin,
alaPimInvalidJoinPruneGroup and alaPimInvalidJoinPruneRp.
If no unexpected Join/Prune messages have been received,
this object is set to unknown(0).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.39 |
alaPimInvalidJoinPruneOriginThe source address of the last unexpected Join/Prune
message received by this device.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.40 |
alaPimInvalidJoinPruneGroupThe IP multicast group address carried in the last
unexpected Join/Prune message received by this device.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.41 |
alaPimInvalidJoinPruneRpThe RP address carried in the last unexpected Join/Prune
message received by this device.ro InetAddress .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.42 |
alaPimRPMappingNotificationPeriodThe minimum time that must elapse between
alaPimRPMappingChange notifications originated by this router.
The default value of 65535 represents an 'infinite' time, in
which case no alaPimRPMappingChange notifications are ever
sent.
The storage type of this object is determined by
alaPimDeviceConfigStorageType.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.43 |
alaPimRPMappingChangeCountThe number of changes to active RP mappings on this device.
Information about active RP mappings is available in
alaPimGroupMappingTable. Only changes to active mappings cause
this count to be incremented. That is, changes that modify
the alaPimGroupMappingEntry with the highest precedence for a
group (lowest value of alaPimGroupMappingPrecedence).
Such changes may result from manual configuration of this
device, or from automatic RP mapping discovery methods
including the PIM Bootstrap Router (BSR) mechanism.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.44 |
alaPimInterfaceElectionNotificationPeriodThe minimum time that must elapse between
alaPimInterfaceElection notifications originated by this
router. The default value of 65535 represents an 'infinite'
time, in which case no alaPimInterfaceElection notifications
are ever sent.
The storage type of this object is determined by
alaPimDeviceConfigStorageType.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.45 |
alaPimInterfaceElectionWinCountThe number of times this device has been elected DR or DF
on any interface.
Elections occur frequently on newly-active interfaces, as
triggered Hellos establish adjacencies. This counter is not
incremented for elections on an interface until the first
periodic Hello has been sent. If this router is the DR or
DF at the time of sending the first periodic Hello after
interface activation, then this counter is incremented
(once) at that time.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, for example
when the device is rebooted.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.46 |
alaPimRefreshIntervalThe interval between successive State Refresh messages sent
by an Originator. This timer period is called the
RefreshInterval in the PIM-DM specification. This object is
used only by PIM-DM.
The storage type of this object is determined by
alaPimDeviceConfigStorageType.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.47 |
alaPimDeviceConfigStorageTypeThe storage type used for the global PIM configuration of
this device, comprised of the objects listed below. If this
storage type takes the value 'permanent', write-access to
the listed objects need not be allowed.
The objects described by this storage type are:
alaPimKeepalivePeriod, alaPimRegisterSuppressionTime,
alaPimNeighborLossNotificationPeriod,
alaPimInvalidRegisterNotificaationPeriod,
alaPimInvalidJoinPruneNotificationPeriod,
alaPimRPMappingNotificationPeriod,
alaPimInterfaceElectionNotificationPeriod and
alaPimRefreshInterval.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.1.48 |
alaPimMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2 |
alaPimMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.1 |
alaPimMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.6.2.2.2 |