ALCATEL-IND1-PARTITIONED-MGR-MIB
The ALCATEL-IND1-PARTITIONED-MGR-MIB provides SNMP access to monitor and configure user partitioning parameters and resource allocation within the Alcatel-Lucent "Birds Of Prey" product line's partitioned manager subsystem. This module enables administrators to track partition-specific operational states, session limits, and resource utilization metrics for multi-tenant network environments.
Imported Objects
Objects
27 total| Object Name |
|---|
alcatelIND1PartitionedMgrMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
User Partitioned Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.25.1 |
IMPORTSThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
User Partitioned Manager Subsystem.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE Unknown .1.3.6.1.4.1.6486.801.1.2.1.25.1 |
alcatelIND1PartitionedMgrMIBObjectsBranch For Partitioned Manager Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.25.1.1 |
endUserProfileMgrMIB OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1 |
endUserProfileTableThe configuration parameters of a end user profile. SEQUENCE OF EndUserProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1 |
endUserProfileEntryAn entry of the end user profile table. EndUserProfileEntry .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1 |
endUserProfileNameThe End User profile name.ro SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.1 |
endUserProfileAreaPhysicalThe accessible rights for the port area.rw EndUserProfileArea .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.2 |
endUserProfileAreaVlanTableThe accessible rights for the vlan area.rw EndUserProfileArea .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.3 |
endUserProfileAreaBasicIpRoutingThe accessible rights for the basic-routing area.rw EndUserProfileArea .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.4 |
endUserProfileAreaIpRoutesTableThe accessible rights for the ip-routes area.rw EndUserProfileArea .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.5 |
endUserProfileAreaMacFilteringTableThe accessible rights for the mac-address-table area.rw EndUserProfileArea .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.6 |
endUserProfileAreaSpantreeThe accessible rights for the spanning-tree area.rw EndUserProfileArea .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.7 |
endUserProfileRowStatusThe status of this table entry.
Reading or writing values :
- active (1) : end User Profile created and OK
- notInService (2) : not used for end User Profile
Only reading values :
- notReady (3) : missing parameters for the end User profile
Only writing values :
- createAndGo (4) : to create an end User Profile
- createAndWait (5) : not used for end User Profile
- destroy (6) : to remove a end User Profile.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.8 |
endUserProfileSlotPortTableThe list of slot/port of a end user. SEQUENCE OF EndUserProfileSlotPortEntry .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2 |
endUserProfileSlotPortEntryAn entry of the end user profile slot/port table. EndUserProfileSlotPortEntry .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2.1 |
endUserProfileSlotNumberThe number of the physical slot contained
in the profile.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2.1.1 |
endUserProfilePortListA string of 64 bits,
corresponding to the port number 1 to 64.
The first bit corresponds to port 1,
the second bit to port 2 until
the 64 bit corresponding to the port 64.rw EndUserPortList .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2.1.2 |
endUserProfileSlotPortRowStatusThe status of this table entry.
Reading or writing values :
- active (1) : end User Profile Slot/Port created and OK
- notInService (2) : not used for end User Profile Slot/Port
Only reading values :
- notReady (3) : missing parameters for the end User profile Slot/Port
Only writing values :
- createAndGo (4) : to create an end User Profile Slot/Port
- createAndWait (5) : not used for end User Profile Slot/Port
- destroy (6) : to remove a end User Profile Slot/Port.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2.1.3 |
endUserProfileVlanIdTableThe list of vlan ids of a end user. SEQUENCE OF EndUserProfileVlanIdEntry .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3 |
endUserProfileVlanIdEntryAn entry of the end user profile Vlan Ids table. EndUserProfileVlanIdEntry .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3.1 |
endUserProfileVlanIdStartThe End User Profile Vlan Id Start in a range.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3.1.1 |
endUserProfileVlanIdEndThe End User Profile Vlan Id End in a range.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3.1.2 |
endUserProfileVlanIdRowStatusThe status of this table entry.
Reading or writing values :
- active (1) : end User Profile Vlan Ids created and OK
- notInService (2) : not used for end User Profile Vlan Ids
Only reading values :
- notReady (3) : missing parameters for the end User profile Vlan Ids
Only writing values :
- createAndGo (4) : to create an end User Profile Vlan Ids
- createAndWait (5) : not used for end User Profile Vlan Ids
- destroy (6) : to remove a end User Profile Vlan Ids.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3.1.3 |
alcatelIND1PartitionedMgrMIBConformanceBranch For Partitioned Manager Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.25.1.2 |
alcatelIND1PartitionedMgrMIBGroupsBranch For Partitioned Manager Subsystem Units Of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.25.1.2.1 |
alcatelIND1PartitionedMgrMIBCompliancesBranch For Partitioned Manager Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.25.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.