ALCATEL-IND1-MAC-ADDRESS-MIB
AI MIB Summary
The ALCATEL-IND1-MAC-ADDRESS-MIB enables SNMP-based monitoring of MAC address learning tables and forwarding database entries on Alcatel-Lucent "Birds Of Prey" series network devices. This module provides visibility into dynamic and static MAC address bindings, including associated VLAN IDs and interface ports, to support Layer 2 topology discovery and troubleshooting.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line, this is the MIB module for address learning mac addresses entity.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1MacAddressMIB.1.3.6.1.4.1.6486.801.1.2.1.8.1
57
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
alcatelIND1MacAddressMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line, this is the MIB module for
address learning mac addresses entity.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.8.1 |
IMPORTSThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line, this is the MIB module for
address learning mac addresses entity.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE Unknown .1.3.6.1.4.1.6486.801.1.2.1.8.1 |
alcatelIND1MacAddressMIBObjectsBranch For Source Learning Module MIB Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1 |
slMacAddressTableA table contains source addresses which can be configured as
permanent (not aged out), delete on reset, delete on timeout
in the MAC address table, and those dynamic learned addresses
which can be viewed and deleted. SEQUENCE OF SlMacAddressEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.1 |
slMacAddressEntryDefninition of the Mac Addresses entries for which the switch
has information.
For creation of a Mac Address, the following 6 fields in
slMacAddressEntry are required:
ifIndex
dot1qVlanIndex
slMacAddress
slMacAddressManagement
slMacAddressDisposition
slMacAddressStatus: must be set last
Dynamic mac addresses can not be created manually.
For deletion of a Mac Address, the following 4 fields in
slMacAddressEntry are required:
ifIndex
dot1qVlanIndex
slMacAddress
slMacAddressStatus: must be set last SlMacAddressEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.1.1 |
slMacAddressThe MAC address for this entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.1.1.1 |
slMacAddressManagementThis object indicates the management of this entry.
permanent(1) - this entry is currently in use
and will remain so after the user removing
this entry.
deleteOnReset(2) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(3) - this entry is currently
in use and will remain so until it is aged
out.
learned(4) - this entry is currently in use
and will remain so until it is aged out.
staticMulticast(5) - this entry is only applicable
to multicast destination addressesrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.1.1.2 |
slMacAddressDispositionThis object indicates the disposition of the entry.
bridging(1) - this entry is currently in use
for bridging.
filtering(2) - this entry is currently in use
for filtering.
quarantined(3) - this entry is currently in use
for quarantined mac.
hostIntegrity check - the entry is currently under host integrity checking.
userNetworkProf - the entry is currently under user network profile Qos.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.1.1.3 |
slMacAddressRowStatusRow Status for creating/deleting the mac address.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.1.1.4 |
slMacAddressProtocolThis object indicates the protocol associated with
a mac address.ro MacAddressProtocolType .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.1.1.5 |
slMacAddressAgingTableDefinition of the timeout for those learned mac addresses and
configured as deleted_on_timeout addresses. SEQUENCE OF SlMacAddressAgingEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.2 |
slMacAddressAgingEntryInformation about the aging time for some specific vlan.
For creation of the aging time, If the vlan Id is specified, then
the aging time value will be applied to those mac addresses in
that vlan. Otherwise, the aging time will be applied to all of
the mac addresses throughout the vlans. SlMacAddressAgingEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.2.1 |
slMacAgingValueThis object indicates the value of mac address aging time.rw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.2.1.1 |
slMacAgingRowStatusRow Status for creating/deleting the aging time.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.2.1.2 |
slPCamTrapObj OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.3 |
slPCAMSlotNumberThe slot number of this Coronado.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.3.1 |
slPCAMSliceNumberThe Slice Number of this Coronado.ro INTEGER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.3.2 |
slPCAMStatusThe layer 2 pesudoCAM status of this Coronado.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.3.3 |
slMacToPortMacTableA list of Mac To Port Binding Mac address. SEQUENCE OF MacToPortMacEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.4 |
slMacToPortMacEntryMac To Port Binding Mac address entry. MacToPortMacEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.4.1 |
slMacToPortMacVlanIdThe vlan Id in which the packet with this mac address is floodedrw INTEGER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.4.1.1 |
slMacToPortMacAddressA Mac address that is associated with the Mac To Port Binding.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.4.1.2 |
slMacToPortMacRowStatusThis indicate whether to add or delete the mac addressrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.4.1.3 |
slDistributedMacModeEnable/Disable Distributed MAC Mode.
When changed, the user must save the current
configuration and reboot the switch for change
to take effect.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.5 |
bcmHashCollisionTrapObj OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.6 |
bcmHashCollisionMacMAC for which hash collision occured.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.6.1 |
bcmHashCollisionSlotPhysical slot number on which the collision MAC is tried to add.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.6.2 |
bcmHashCollisionPortPhysical port number on which the collision MAC is tried to add.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.6.3 |
bcmHashCollisionVlanThe Vlan Id on which the collision MAC is tried to add.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.6.4 |
bcmHashCollisionTableThe BCM Table in which the collision occurred.ro DisplayString .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.6.5 |
slMacLearningControlTableThis table provides the control information about the mac learning on ports SEQUENCE OF SlMacLearningControlEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.7 |
slMacLearningControlEntryThis table provides the control information about the mac learning on ports SlMacLearningControlEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.7.1 |
slMacLearningControlStatusStatus of mac learning on port.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.7.1.1 |
alaSlMacAddressGlobalTableThis table contains MAC addresses from both Vlan and VPLS domain.
This table contains source addresses which can be configured as
permanent (not aged out), delete on reset, delete on timeout
in the MAC address table, and those dynamic learned addresses
which can be viewed and deleted. SEQUENCE OF AlaSlMacAddressGlobalEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8 |
alaSlMacAddressGlobalEntryDefninition of the Mac Addresses entries for which the switch
has information.
For creation of a Mac Address in VLAN domain, the following fields in
slMacAddressGlobalEntry are required:
slMacDomain
slOriginId - IfIndex
slServiceId - Vlan ID
slMacAddressGbl
slMacAddressGblManagement
slMacAddressGblDisposition
slMacAddressGblStatus: must be set last
Dynamic mac addresses can not be created manually.
For creation of Mac Address in VPLS domain, following fields in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP/sBind
slServiceId - VPLS Service ID
slOriginId - SAP - PortId; sBind - SDPID
slSubId - SAP - VlanId; sBind - VcID
slMacAddressGbl
slMacAddressGblStatus: must be set last
Dynamic mac addresses can not be created manually.
For deletion of a Mac Address in VLAN domain, the following fields in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slOriginId - IfIndex
slServiceId - Vlan ID
slMacAddressGbl
slMacAddressGblManagement
slMacAddressGblStatus: must be set last
For deletion of a Mac Address in vpls based, following fileds in
alaSlMacAddressGlobalEntry are required:
slMacDomain
slLocaleType - SAP/sBind
slServiceId - VPLS Service ID
slOriginId - SAP - PortId; sBind - SDPID
slSubId - SAP - VlanId; sBind - VcID
slMacAddressGbl
slMacAddressGblStatus: must be set last AlaSlMacAddressGlobalEntry .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1 |
slMacDomainThis object indicates whether this MAC is learned on Vlan domain or vpls domain Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.1 |
slLocaleTypeThis field is used only for VPLS, It defaults to default for vlan domain MACs Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.2 |
slOriginIdThis should be ifIndex for Vlan domain MAC;
ifIndex for SAP of VPLS domain MAC;
SDP_ID for sBind of VPLS domain MAC INTEGER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.3 |
slServiceIdDepending on the domain type, Vlan based or VPLS based.
If Vlan based learning, then this field holds the Vlan ID.
If VPLS based learning, then this field holds the VPLS Service ID INTEGER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.4 |
slSubIdThis object is only meaningful in VPLS domain.
If SAP, this is the encapsulation ID;
If sBind, this is the vcID,
This value will be default to -0- in VLAN domain INTEGER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.5 |
slMacAddressGblThe MAC address for this entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.6 |
slMacAddressGblManagementThis object indicates the management of this entry.
permanent(1) - this entry is currently in use
and will remain so after the user removing
this entry.
deleteOnReset(2) - this entry is currently in
use and will remain so until the next
reset of the bridge.
deleteOnTimeout(3) - this entry is currently
in use and will remain so until it is aged
out.
learned(4) - this entry is currently in use
and will remain so until it is aged out.
staticMulticast(5) - this entry is only applicable
to multicast destination addressesrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.7 |
slMacAddressGblDispositionThis object indicates the disposition of the entry.
bridging(1) - this entry is currently in use for bridging.
filtering(2) - this entry is currently in use for filtering.
quarantined(3) - this entry is currently in use for quarantined mac.
hostIntegritycheck(4) - the entry is currently under host integrity checking.
userNetworkProf(5) - the entry is currently under user network profile Qos.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.8 |
slMacAddressGblRowStatusRow Status for creating/deleting the mac address.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.9 |
slMacAddressGblProtocolThis object indicates the protocol associated with
a mac address.rw MacAddressProtocolType .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.8.1.10 |
halHashCollisionTrapObj OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10 |
halHashCollisionMacMAC for which hash collision occured.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10.1 |
halHashCollisionSlotPhysical slot number on which the collision MAC is tried to add.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10.2 |
halHashCollisionPortPhysical port number on which the collision MAC is tried to add.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10.3 |
halHashCollisionVlanThe Vlan Id on which the collision MAC is tried to add.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10.4 |
halHashCollisionTableThe BCM Table in which the collision occurred.ro DisplayString .1.3.6.1.4.1.6486.801.1.2.1.8.1.1.10.5 |
alcatelIND1MacAddressMIBConformanceBranch for Source Learning Module MIB Subsystem Conformance Information. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.8.1.2 |
alcatelIND1MacAddressMIBGroupsBranch for Source Learning Module MIB Subsystem Units of Conformance. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.8.1.2.1 |
alcatelIND1MacAddressMIBCompliancesBranch for Source Learning Module MIB Subsystem Compliance Statements. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.8.1.2.2 |
slPCAMStatusTrapTrap Status of Layer 2 pesudoCAM on this Coronado. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.3.2.9.0.1 |
bcmHashCollisionTrapTrap to notify the hash collision in BCM Table. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.3.2.9.0.3 |
halHashCollisionTrapTrap to notify the hash collision in BCM Table. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.3.2.9.0.4 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →ALCATEL-IND1-QOS-MIB
The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
760 objects→
ALCATEL-IND1-SERVICE-MGR-MIB
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
453 objects→
ALCATEL-IND1-FIPS-MIB
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
432 objects→
ALCATEL-IND1-BGP-MIB
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
396 objects→
ALCATEL-IND1-DEVICES
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
267 objects→
ALCATEL-IND1-AAA-MIB
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.
252 objects→