ALCATEL-IND1-ISIS-SPB-MIB
AI MIB Summary
The ALCATEL-IND1-ISIS-SPB-MIB manages Shortest Path Bridging (SPB) and IS-IS protocol parameters on Alcatel-Lucent networking equipment, specifically exposing configuration and status metrics for global SPB instances, topology databases, and service identifiers (I-SIDs). Despite the description erroneously referencing OSPF, this module is functionally dedicated to the monitoring and control of IEEE 802.1aq SPB deployment elements, including link-state synchronization and forwarding state tables.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
Configuration Of Global OSPF Configuration Parameters.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1IsisSpbMib.1.3.6.1.4.1.6486.801.1.2.1.10.17.1
187
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
187 total| Object Name |
|---|
alcatelIND1IsisSpbMibThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
Configuration Of Global OSPF Configuration Parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2007 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.10.17.1 |
alcatelIND1IsisSpbMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1 |
alcatelIND1IsisSpbSys OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1 |
alcatelIND1IsisSpbSysControlBvlanThe vlan tag applied to ISIS-SPB frames.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.1 |
alcatelIND1IsisSpbSysAdminStateControls the operational state of the ISIS-SPB protocol.
Default value is disable(2).rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.2 |
alcatelIND1IsisSpbSysAreaAddressThe three byte IS-IS Area Address to join. Normally
SPB will use area 00-00-00 however if SPB is being
used in conjunction with IPV4/V6 it may operate
using the IS-IS area address already in use.
This object is persistent.
cf. ieee8021SpbSysAreaAddressrw AlcatelIND1IsisSpbAreaAddress .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.3 |
alcatelIND1IsisSpbSysIdSYS ID used for all SPB instances on this bridge.
A six byte network wide unique identifier.
cf. ieee8021SpbSysIdro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.4 |
alcatelIND1IsisSpbSysControlAddrGroup MAC that the ISIS control plane will use. SPB may
use a number of different addresses for SPB Hello and
LSP exchange. Section 27.2, 8.13.1.5 and Table 8-13 covers
the different choices. The choices are as follows:
01-80-C2-00-00-14 = All Level 1 Intermediate Systems
01-80-C2-00-00-15 = All Level 2 Intermediate Systems
09-00-2B-00-00-05 = All Intermediate Systems.
01-80-xx-xx-xx-xx = All Provider Bridge Intermediate Systems.
01-80-yy-yy-yy-yy = All Customer Bridge Intermediate Systems.
This object is persistent.
cf. ieee8021SpbSysControlAddrrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5 |
alcatelIND1IsisSpbSysNameName to be used to refer to this SPB bridge. This is advertised
in IS-IS and used for management.
cf. ieee8021SpbSysNamero AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.6 |
alcatelIND1IsisSpbSysBridgePriorityThis is a 16 bit quantity which ranks this SPB Bridge
relative to others when breaking ties. This priority
is the high 16 bits of the Bridge Identifier. Its impact
depends on the tie breaking algorithm. Recommend
values 0..15 be assigned to core switches to ensure
diversity of the ECT algorithms.
cf. ieee8021SpbSysBridgePriorityrw AlcatelIND1IsisSpbBridgePriority .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.7 |
alcatelIND1IsisSpbmSysSPSourceIdThe Shortest Path Source Identifier.
It is the high order 3 bytes for Group Address DA from this
bridge.
Note that only the 20 bits not including the top 4 bits are
the SPSourceID.
This object is persistent.
cf. ieee8021SpbmSysSPSourceIdrw AlcatelIND1IsisSpbmSPsourceId .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.8 |
alcatelIND1IsisSpbvSysModeIndication of supporting SPBV mode
auto(=1)/manual(=2)
auto => enable SPBV mode and auto allocate SPVIDs.
manual => enable SPBV mode and manually assign SPVIDs.
The default is auto.
This object is persistent.
cf. ieee8021SpbvSysModerw AlcatelIND1IsisSpbMode .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.9 |
alcatelIND1IsisSpbmSysModeIndication of supporting SPBM mode
auto(=1)/manual(=2)
auto => enable SPBM mode and auto allocate SPsourceID.
manual => enable SPBM mode and manually assign SPsourceID.
The default is auto.
This object is persistent.
cf. ieee8021SpbmSysModerw AlcatelIND1IsisSpbMode .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.10 |
alcatelIND1IsisSpbSysDigestConventionThe Agreement Digest convention setting
off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3)
off => disable agreement digest checking in hellos
loopFreeBoth => block unsafe group and individual
traffic when digests disagree.
loopFreeMcastOnly =>block group traffic when digests disagree.
The default is loopFreeBoth.
This object is persistent.
cf. ieee8021SpbSysDigestConventionrw AlcatelIND1IsisSpbDigestConvention .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.11 |
alcatelIND1IsisSpbSysSetOverloadAdministratively set the overload bit.
The overload bit will continue to be set if the
implementation runs out of memory, independent of
this variable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.12 |
alcatelIND1IsisSpbSysOverloadTimeoutThe value of alcatelIND1IsisSpbSysOverloadTimeout is
the amount of time, in seconds, the router operates
in the overload state before attempting to
reestablish normal operations. While in overload
state, this IS-IS router will only be used if the
destination is only reachable via this router; it is
not used for other transit traffic. Operationally
placing the router into the overload state is often
used as a precursor to shutting down the IS-IS
protocol operation.
The value of 0 means the router is in overload
infinitely.rw Unsigned32 (0|60..1800) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.13 |
alcatelIND1IsisSpbSysOverloadOnBootThe value of alcatelIND1IsisSpbSysOverloadOnBoot
specifies if the router should be in overload state
right after the boot up process. If the
alcatelIND1IsisSpbSysOverloadOnBoot is set to
'enabled' the overload timeout is maintained by
alcatelIND1IsisSpbSysOverloadOnBootTimeout.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.14 |
alcatelIND1IsisSpbSysOverloadOnBootTimeoutThe value of
alcatelIND1IsisSpbSysOverloadOnBootTimeout is the
amount of time, in seconds for which the router
operates in the overload state before attempting to
reestablish normal operations when the system comes
up after a fresh boot.
While in overload state, this IS-IS router will only
be used if the destination is only reachable via this
router; it is not used for other transit traffic.
The value of 0 means the router is in overload
infinitely.rw Unsigned32 (0|60..1800) UNITS "seconds" .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.15 |
alcatelIND1IsisSpbSysOverloadStatusIndicates whether or not this isis-spb instance is in
overload state. When has the value 'notInOverload',
the IS-IS level is normal state. When the value is
'dynamic', the level is in the overload state because
of insufficient memeory to add additional entries to
the IS-IS database for this level. When the value is
'manual', the level has been put into the overload
state administratively as a result of the
alcatelIND1IsisSpbSysSetOverload object having been
set.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.16 |
alcatelIND1IsisSpbSysLastEnabledTimeContains the sysUpTime value when
alcatelIND1IsisSpbSysAdminState was last set to
enabled (1) to run the IS-IS protocol.ro DisplayString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.17 |
alcatelIND1isisSpbSysLastSpfRunContains the sysUpTime value when the last
SPF run was performed for this instance of the IS-IS protocol.ro DisplayString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.18 |
alcatelIND1IsisSpbSysNumLSPsSpecifies the number of LSPs in the database.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.19 |
alcatelIND1IsisSpbSysLastEnabledTimeStampContains the sysUpTime value when
alcatelIND1IsisSpbSysAdminState was last set to
enabled (1) to run the IS-IS protocol.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.20 |
alcatelIND1isisSpbSysLastSpfRunTimeStampContains the sysUpTime value when the last
SPF run was performed for this instance of the IS-IS protocol.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.21 |
alcatelIND1IsisSpbProtocolConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2 |
alcatelIND1IsisSpbProtocolSpfMaxWaitThe value of alcatelIND1IsisSpbProtocolSpfMaxWait defines the Maximum interval
between two consecutive spf calculations in milliseconds.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.1 |
alcatelIND1IsisSpbProtocolSpfInitialWaitThe value of alcatelIND1IsisSpbProtocolSpfInitialWait defines the initial SPF
calculation delay (in milliseconds) after a topology change.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.2 |
alcatelIND1IsisSpbProtocolSpfSecondWaitThe value of alcatelIND1IsisSpbProtocolSpfSecondWait defines the hold time
between the first and second SPF calculation (in milliseconds).
Subsequent SPF runs will occur at exponentially increasing
intervals of spf-second-wait i.e. if spf-second-wait is 1000,
then the next SPF will run after 2000 msec, the next one at
4000 msec etc until it is capped off at spf-wait value.
The SPF interval will stay at spf-wait value until there are no
more SPF runs scheduled in that interval. After a full interval
without any SPF runs, the SPF interval will drop back to
spf-initial-wait.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.3 |
alcatelIND1IsisSpbProtocolLspMaxWaitThe value of alcatelIND1IsisSpbProtocolLspWait defines the maximum interval
(in milliseconds) between two consecutive ocurrences of an LSP
being generated.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.4 |
alcatelIND1IsisSpbProtocolLspInitialWaitThe value of alcatelIND1IsisSpbProtocolLspInitialWait defines the initial LSP
generation delay (in milliseconds).rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.5 |
alcatelIND1IsisSpbProtocolLspSecondWaitThe value of alcatelIND1IsisSpbProtocolLspInitialWait defines the hold time
between the first and second LSP generation (in milliseconds).rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.6 |
alcatelIND1IsisSpbProtocolGracefulRestartThe value of alcatelIND1IsisSpbProtocolGracefulRestart specifies whether the
graceful restart is enabled or disabled for this instance of IS-IS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.7 |
alcatelIND1IsisSpbProtocolGRHelperModeThe value of alcatelIND1IsisSpbProtocolGRHelperMode specifies whether the
graceful restart helper mode is enabled or disabled for this
instance of IS-IS.
alcatelIND1IsisSpbProtocolGRHelperMode is valid only if the value of
alcatelIND1IsisSpbProtocolGracefulRestart is 'true'.
When alcatelIND1IsisSpbProtocolGRHelperMode has a value of 'true' graceful
restart helper capabilities are enabled. When it has a value
of 'false' the graceful restart helper capabilities are disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.8 |
alcatelIND1IsisSpbAdjStaticTableA table containing the SPB configuration data for a neighbor.
cf. ieee8021SpbAdjStaticTable SEQUENCE OF AlcatelIND1IsisSpbAdjStaticTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3 |
alcatelIND1IsisSpbAdjStaticTableEntryThis table can be used to display the interfaces and metrics
of a neighbor bridge. AlcatelIND1IsisSpbAdjStaticTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1 |
alcatelIND1IsisSpbAdjStaticEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.1 |
alcatelIND1IsisSpbAdjStaticEntryIfIndexThe System interface/index which defines this
adjacency. A value of 0 is a wildcard for any
interface on which SPB Operation is supported. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.2 |
alcatelIND1IsisSpbAdjStaticEntryMetricThe alcatelIND1IsisSpb metric (incremental cost) to this peer.
The contribution of this link to total path cost.
Recommended values are inversely proportional to link speed.
Range is (1..16777215) where 16777215 (0xFFFFFF) is
infinity; infinity signifies that the adjacency is
UP, but is not to be used for traffic.
This object is persistent.rw AlcatelIND1IsisSpbLinkMetric .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.3 |
alcatelIND1IsisSpbAdjStaticEntryHelloIntervalMaximum period, in seconds, between IIH PDUs.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.4 |
alcatelIND1IsisSpbAdjStaticEntryHelloMultiplierThis value is multiplied by the corresponding HelloInterval
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by receivers
of hello packets from this ISrw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.5 |
alcatelIND1IsisSpbAdjStaticEntryIfAdminStateThe administrative state of this interface/port.
Up is the default.
This object is persistent.rw AlcatelIND1IsisSpbAdjState .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.6 |
alcatelIND1IsisSpbAdjStaticEntryRowStatusThe object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.7 |
alcatelIND1IsisSpbAdjStaticEntryCircuitIdThe local circuit id.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.8 |
alcatelIND1IsisSpbAdjStaticEntryIfOperStateThe current operational state of IS-IS protocol on this
interface.ro AlcatelIND1IsisSpbIfOperState .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.9 |
alcatelIND1IsisSpbAdjStaticEntryAFDConfigConfiguration is made by admin or auto-fabric on
this interfacero Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.10 |
alcatelIND1IsisSpbEctStaticTableThe Equal Cost Tree (ECT) static configuration table.
cf. ieee8021SpbEctStaticTable SEQUENCE OF AlcatelIND1IsisSpbEctStaticTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4 |
alcatelIND1IsisSpbEctStaticTableEntryThe Equal Cost Tree static configuration Table defines the
ECT ALGORITHM for the Base VID and if SPBV is used for the SPVID. AlcatelIND1IsisSpbEctStaticTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1 |
alcatelIND1IsisSpbEctStaticEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.1 |
alcatelIND1IsisSpbEctStaticEntryBaseVidBase VID to use for this ECT-ALGORITHM.
Traffic B-VID (SPBM) or Management VID (SPBV).
A Base VID value of 4095 is a wildcard for any Base VID
assigned to SPB operation. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.2 |
alcatelIND1IsisSpbEctStaticEntryEctAlgorithmThis identifies the tie-breaking algorithms used in
Shortest Path Tree computation. Values range from
00-80-c2-01 to 00-80-c2-16 for 802.1 for each
the 16 ECT behaviors.
This object is persistent.rw AlcatelIND1IsisSpbEctAlgorithm .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.3 |
alcatelIND1IsisSpbvEctStaticEntrySpvidIf SPBV mode this is the VID originating from this bridge.
Must be set = 0 if SPVID Auto-allocation is required.
Otherwise in SPBM this is empty, should be set = 0.
This object is persistent.rw VlanIdOrNone .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.4 |
alcatelIND1IsisSpbEctStaticEntryRowStatusThe object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.5 |
alcatelIND1IsisSpbEctStaticEntryMulticastModeThis identifies the tandem multicast-mode of this
bvlan. A value of 0 indicates (S,G) mode, while
a value of 1 indicates (*,G) mode.rw AlcatelIND1IsisSpbmMulticastMode .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.6 |
alcatelIND1IsisSpbEctStaticEntryRootBridgeSysNameName of the root bridge. This object's value
has meaning only when the bvlan is in (*,G) mode
(e.g. alcatelIND1IsisSpbEctStaticEntryMulticastMode
is set to gmode).ro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.7 |
alcatelIND1IsisSpbEctStaticEntryRootBridgeSysMacMac address of the root bridge. This object's value
has meaning only when the bvlan is in (*,G) mode
(e.g. alcatelIND1IsisSpbEctStaticEntryMulticastMode
is set to gmode).ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.8 |
alcatelIND1IsisSpbAdjDynamicTableThe Adjacency table.
cf. ieee8021SpbAdjDynamicTable
cf. show ip isis adjacency SEQUENCE OF AlcatelIND1IsisSpbAdjDynamicEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5 |
alcatelIND1IsisSpbAdjDynamicEntryThis table is used to determine operational
values of digests and interfaces of neighbor
bridges. AlcatelIND1IsisSpbAdjDynamicEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1 |
alcatelIND1IsisSpbAdjDynamicEntryTopIxThe ISIS Topology Index identifier to which
this instance belongs. Each Topology Index
defines logical topology and is used to
enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.1 |
alcatelIND1IsisSpbAdjDynamicEntryIfIndexSystem interface/index which defines this
adjacency A value of 0 is a wildcard for any
interface on which SPB Operation is enabled. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.2 |
alcatelIND1IsisSpbAdjDynamicEntryPeerSysIdThe SPB System Identifier of this peer. This
is used to identify a neighbor uniquely. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.3 |
alcatelIND1IsisSpbAdjDynamicEntryAdjStateThe state of the adjacency.ro AlcatelIND1IsisSpbAdjState .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.4 |
alcatelIND1IsisSpbAdjDynamicEntryAdjUpTimeThe time when the adjacency last entered the up state.ro OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.5 |
alcatelIND1IsisSpbAdjDynamicEntryHoldRemainingThe remaining hold time in seconds.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.6 |
alcatelIND1IsisSpbAdjDynamicEntryHoldTimerThe holding time in seconds for this
adjacency updated from received IIH PDUs.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.7 |
alcatelIND1IsisSpbAdjDynamicEntryNbrExtLocalCircuitIdThe extended circuit id advertised by the peer.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.8 |
alcatelIND1IsisSpbAdjDynamicEntryNeighPriorityPriority of the neighboring Intermediate
System for becoming the Designated
Intermediate System.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.9 |
alcatelIND1IsisSpbAdjDynamicEntryPeerSysNameIS-IS system name of peer. This is the ASCII
name assigned to the bridge to aid
management.ro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.10 |
alcatelIND1IsisSpbAdjDynamicEntryRestartStatusThe graceful restart status of the
adjacency.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.11 |
alcatelIND1IsisSpbAdjDynamicEntryRestartSupportIndicates whether adjacency supports ISIS
graceful restart. If 'true', the adjacency
supports graceful restart.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.12 |
alcatelIND1IsisSpbAdjDynamicEntryRestartSuppressedIndicates if the adjacency has requested this
router to suppress advertisement of the
adjacency in this router's LSPs. If 'true'
the adjacency has requested to suppress
advertisement of the LSPs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.13 |
alcatelIND1IsisSpbAdjDynamicEntryAdjUpTimeStampThe sysUpTime value when the adjacency last entered the up state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.14 |
alcatelIND1IsisSpbNodeTableThe Node table.
cf. show ip isis nodes SEQUENCE OF AlcatelIND1IsisSpbNodeTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6 |
alcatelIND1IsisSpbNodeTableEntryThis table can be used to display information
about known bridges. AlcatelIND1IsisSpbNodeTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1 |
alcatelIND1IsisSpbNodeTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.1 |
alcatelIND1IsisSpbNodeSysIdSYS ID used for all SPB instances on the bridge.
A six byte network wide unique identifier. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.2 |
alcatelIND1IsisSpbNodeSysNameName to be used to refer to the SPB bridge. This is advertised
in IS-IS and used for management.ro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.3 |
alcatelIND1IsisSpbNodeSPSourceIdThe Shortest Path Source Identifier.
It is the high order 3 bytes for Group Address DA from the
bridge.
Note that only the 20 bits not including the top 4 bits are
the SPSourceID.ro AlcatelIND1IsisSpbmSPsourceId .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.4 |
alcatelIND1IsisSpbNodeBridgePriorityThis is a 16 bit quantity which ranks the SPB Bridge
relative to others when breaking ties. This priority
is the high 16 bits of the Bridge Identifier. Its impact
depends on the tie breaking algorithm.ro AlcatelIND1IsisSpbBridgePriority .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.5 |
alcatelIND1IsisSpbUnicastTableThe unicast table.
cf. show ip isis unicast-table SEQUENCE OF AlcatelIND1IsisSpbUnicastTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7 |
alcatelIND1IsisSpbUnicastTableEntryThis table can be used to display information
about unicast targets. AlcatelIND1IsisSpbUnicastTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1 |
alcatelIND1IsisSpbUnicastTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.1 |
alcatelIND1IsisSpbUnicastBvlanThe bvlan associated with the unicast target. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.2 |
alcatelIND1IsisSpbUnicastSysMacThe mac address of the bridge associated with the unicast target. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.3 |
alcatelIND1IsisSpbUnicastSysNameName of the bridge associated with the unicast target.ro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.4 |
alcatelIND1IsisSpbUnicastOutboundIfIndexOutbound interface used to reach the unicast target.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.5 |
alcatelIND1IsisSpbMulticastTableThe multicast table.
cf. show ip isis multicast-table SEQUENCE OF AlcatelIND1IsisSpbMulticastTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8 |
alcatelIND1IsisSpbMulticastTableEntryThis table can be used to display the
multicast table for SPB AlcatelIND1IsisSpbMulticastTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1 |
alcatelIND1IsisSpbMulticastTableEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.1 |
alcatelIND1IsisSpbMulticastTableEntryBvlanBvlan of the multicast entry. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.2 |
alcatelIND1IsisSpbMulticastTableEntryMulticastMacMulticast destination MAC of the multicast entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.3 |
alcatelIND1IsisSpbMulticastTableEntryIfIndexOutboundOutbound interface index of the multicast entry, zero means local node is multicast receiver InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.4 |
alcatelIND1IsisSpbMulticastTableEntrySrcMacSystem MAC of the multicast source, all zero means any MAC.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.5 |
alcatelIND1IsisSpbMulticastTableEntryIfIndexInboundInbound interface index of the multicast source, zero means local node is multicast sourcero InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.6 |
alcatelIND1IsisSpbMulticastTableEntrySysNameSystem name of multicast sourcero AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.7 |
alcatelIND1IsisSpbMulticastTableEntryIsidThe service identifier, e.g. isid number of the multicast entry.ro AlcatelSpbServiceIdentifier .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.8 |
alcatelIND1IsisSpbLSPTableThe LSP table (database).
cf. show ip isis database SEQUENCE OF AlcatelIND1IsisSpbLSPEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9 |
alcatelIND1IsisSpbLSPEntryEach row entry in the alcatelIND1IsisSpbLSPTable
represents an LSP in the LSP database. AlcatelIND1IsisSpbLSPEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1 |
alcatelIND1IsisSpbLSPTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.1 |
alcatelIND1IsisSpbLSPIdThe LSP Id. The format is 6 octets of ajacency
system-id followed by 1 octet LanId and 1 octet LSP
Number. OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.2 |
alcatelIND1IsisSpbLSPSeqThe sequence number of an LSP. The sequence number is
a four byte quantity that represents the version of
an LSP. The higher the sequence number, the more up
to date the information. The sequence number is
always incremented by the system that originated the
LSP and ensures that there is only one version of
that LSP in the entire network.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.3 |
alcatelIND1IsisSpbLSPChecksumThe checksum of contents of LSP from the SourceID
field in the LSP till the end. The checksum is
computed using the Fletcher checksum algorithm.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.4 |
alcatelIND1IsisSpbLSPLifetimeRemainRemaining lifetime of this LSP. This is a
decrementing counter that decrements in seconds.
When the remaining lifetime becomes zero, the
contents of the LSP should not be considered for SPF
calculation.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.5 |
alcatelIND1IsisSpbLSPVersionThe version of the ISIS protocol that generated the
LSP.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.6 |
alcatelIND1IsisSpbLSPPktTypePacket type for instance Hello PDUs, LSPs, CSNPs or
PSNPs.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.7 |
alcatelIND1IsisSpbLSPPktVersionThe version of the ISIS protocol that generated the
Packet.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.8 |
alcatelIND1IsisSpbLSPMaxAreaMaximum number of areas supported by the originator
of the LSP. A value of 0 indicates a default of 3
areas.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.9 |
alcatelIND1IsisSpbLSPSysIdLenThe length of the system-id as used by the
originator.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.10 |
alcatelIND1IsisSpbLSPAttributesAttributes associated with the LSP. These include the
attached bit, overload bit, IS type of the system
originating the LSP and the partition repair
capability. The attached bit and the overload bit are
of significance only when present in the LSP numbered
zero and should be ignored on receipt in any other
LSP.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.11 |
alcatelIND1IsisSpbLSPUsedLenThe used length for the LSP. For an LSP that is not
self originated, the used length is always equal to
alloc len. For self originated LSPs, the used length
is less than or equal to the alloc len.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.12 |
alcatelIND1IsisSpbLSPAllocLenThe length allocated for the LSP to be stored.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.13 |
alcatelIND1IsisSpbLSPBuffThe LSP as it exists in the LSP database.ro OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.14 |
alcatelIND1IsisSpbMulticastSourceTableThe multicast source table.
cf. show ip isis multicast-sources SEQUENCE OF AlcatelIND1IsisSpbMulticastSourceEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10 |
alcatelIND1IsisSpbMulticastSourceEntryThis table can be used to display information
about multicast sources. AlcatelIND1IsisSpbMulticastSourceEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1 |
alcatelIND1IsisSpbMulticastSourceTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.1 |
alcatelIND1IsisSpbMulticastSourceSysMacThe mac address of the bridge associated with the
multicast source. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.2 |
alcatelIND1IsisSpbMulticastSourceBvlanThe bvlan associated with the multicast source. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.3 |
alcatelIND1IsisSpbMulticastSourceSysNameName of the bridge associated with the multicast
source.ro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.4 |
alcatelIND1IsisSpbMulticastSourceReachableTrue if we have a path to the multicast source.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.5 |
alcatelIND1IsisSpbSpfTableThe spf table.
cf. show spb isis spf SEQUENCE OF AlcatelIND1IsisSpbSpfTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11 |
alcatelIND1IsisSpbSpfTableEntryThis table can be used to display reachability information
about known bridges, calculated by the Spf algorithm. AlcatelIND1IsisSpbSpfTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1 |
alcatelIND1IsisSpbSpfBvlanThe vlan to which this entry belongs. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.1 |
alcatelIND1IsisSpbSpfSysMacThe mac-address of the bridge identified by this entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.2 |
alcatelIND1IsisSpbSpfSysNameName of the bridge identified by this entry.ro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.3 |
alcatelIND1IsisSpbSpfIfIndexThe outgoing interface index for reaching the bridge identified by this entry.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.4 |
alcatelIND1IsisSpbSpfNextHopSysMacThe mac-address of the next-hop for reaching the bridge identified by this entryro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.5 |
alcatelIND1IsisSpbSpfNextHopSysNameName of the next-hop bridge for reaching the bridge identified by this entryro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.6 |
alcatelIND1IsisSpbSpfMetricThe metric/incremental cost to reach the bridge identified by this entry.ro AlcatelIND1IsisSpbLinkMetric .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.7 |
alcatelIND1IsisSpbSpfHopCountThe number of hops needed to reach the bridge identified by this entry.ro Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.8 |
alcatelIND1IsisSpbMulticastSourceSpfTableThe multicast source spf table.
cf. show ip isis multicast-sources-spf SEQUENCE OF AlcatelIND1IsisSpbMulticastSourceSpfTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryThis table can be used to display the
spf table of multicast sources in a SPB network. AlcatelIND1IsisSpbMulticastSourceSpfTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.1 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryBMacThe mac address of the multicast source. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.2 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryBvlanThe bvlan of the multicast source spf entry. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.3 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryDestMacThe destination mac address of the multicast source spf entry MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.4 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryIfIndexThe outbound ifindex of the multicast source spf entry.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.5 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryNHopNameThe next hop system name of the multicast source spf entry.ro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.6 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryNHopMacThe next hop system mac of the multicast source spf entry.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.7 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryMetricThe path metric of the multicast source spf entry.ro AlcatelIND1IsisSpbLinkMetric .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.8 |
alcatelIND1IsisSpbMulticastSourceSpfTableEntryHopCountThe hop count of the multicast source spf entry.ro Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.9 |
alcatelIND1IsisSpbIngressMacFilterTableThe ingress mac filter table.
cf. show ip isis ingress-mac-filter SEQUENCE OF AlcatelIND1IsisSpbIngressMacFilterEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13 |
alcatelIND1IsisSpbIngressMacFilterEntryThe ingress mac filter table.
cf. show spb isis ingress-mac-filter AlcatelIND1IsisSpbIngressMacFilterEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1 |
alcatelIND1IsisSpbIngressMacBvlanThe vlan to which this entry belongs. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.1 |
alcatelIND1IsisSpbIngressMacSysMacThe mac-address that identifies this entry. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.2 |
alcatelIND1IsisSpbIngressMacSysNameThe name of the bridge identified by this entry.ro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.3 |
alcatelIND1IsisSpbIngressMacIfIndexThe ifindex of this entry.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.4 |
alcatelIND1IsisSpbServiceTableThe services table.
cf. show spb isis services SEQUENCE OF AlcatelIND1IsisSpbServiceTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14 |
alcatelIND1IsisSpbServiceTableEntryThis table can be used to display the
local configured and dynamically learned services. AlcatelIND1IsisSpbServiceTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1 |
alcatelIND1IsisSpbServiceTableEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.1 |
alcatelIND1IsisSpbServiceTableEntryBvlanBvlan of the service. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.2 |
alcatelIND1IsisSpbServiceTableEntryIsidThe service identifier, e.g. isid number AlcatelSpbServiceIdentifier .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.3 |
alcatelIND1IsisSpbServiceTableEntrySysMacSystem MAC of the SPB node on which the service is configured MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.4 |
alcatelIND1IsisSpbServiceTableEntrySysNameSystem name of SPB node on which the service is configuredro AlcatelIND1IsisSpbSystemName .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.5 |
alcatelIND1IsisSpbServiceTableEntryIsidFlagsService flags e.g. source or sink of multicast trafficro AlcatelIND1IsisSpbmIsidFlags .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.6 |
alcatelIND1SpbIPVPNBindTableThe table binds vrf, ISID and IP gateway together to enable
route exchange between GRM and SPB-ISIS. The exchange is bidirectional.
route-map only applies to VRF routes imported to ISIS from GRM.
There is no filter from ISIS to GRM.
cf. show spb ipvpn bind SEQUENCE OF AlcatelIND1SpbIPVPNBindTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15 |
alcatelIND1SpbIPVPNBindTableEntryAn Entry in the alcatelIND1SpbIPVPNBindTable AlcatelIND1SpbIPVPNBindTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1 |
alcatelIND1SpbIPVPNBindTableEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.1 |
alcatelIND1SpbIPVPNBindVrfNameThe VRF for which routes are being imported from GRM to ISIS-SPB. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.2 |
alcatelIND1SpbIPVPNBindIsidThe ISID to set for routes imported from GRM to ISIS-SPB. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.3 |
alcatelIND1SpbIPVPNBindGatewayThe IP gateway to set for routes imported from GRM to ISIS-SPB. IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.4 |
alcatelIND1SpbIPVPNBindImportRouteMapThe route-map name (or empty-string for all-routes) for routes imported from GRM to ISIS-SPB.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.5 |
alcatelIND1SpbIPVPNBindRowStatusThe object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.6 |
alcatelIND1SpbIPVPNRouteTableThe IP-VPN table of routes.
cf. show spb ipvpn route-table SEQUENCE OF AlcatelIND1SpbIPVPNRouteTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16 |
alcatelIND1SpbIPVPNRouteTableEntryAn Entry in the alcatelIND1SpbIPVPNRouteTable AlcatelIND1SpbIPVPNRouteTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1 |
alcatelIND1SpbIPVPNRouteTableEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.1 |
alcatelIND1SpbIPVPNRouteIsidThe ISID of the IP-VPN route Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.2 |
alcatelIND1SpbIPVPNRoutePrefixThe destination prefix of the IP-VPN route IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.3 |
alcatelIND1SpbIPVPNRoutePrefixLenThe prefix length of the IP-VPN route Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.4 |
alcatelIND1SpbIPVPNRouteGatewayThe next-hop/gateway of the IP-VPN route IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.5 |
alcatelIND1SpbIPVPNRouteNodeNameThe BEB name of the node that advertised the IP-VPN routero OCTET STRING .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.6 |
alcatelIND1SpbIPVPNRouteMetricThe route-metric of the IP-VPN routero Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.7 |
alcatelIND1SpbIPVPNRedistVrfTableThe IP-VPN table of configured route-redistributions where the source entity is a VRF.
cf. show spb ipvpn redist SEQUENCE OF AlcatelIND1SpbIPVPNRedistVrfTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17 |
alcatelIND1SpbIPVPNRedistVrfTableEntryAn Entry in the alcatelIND1SpbIPVPNRedistVrfTable AlcatelIND1SpbIPVPNRedistVrfTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1 |
alcatelIND1SpbIPVPNRedistVrfTableEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.1 |
alcatelIND1SpbIPVPNRedistVrfSourceVrfThe source VRF from which routes are being redistributed. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.2 |
alcatelIND1SpbIPVPNRedistVrfDestIsidThe destination ISID to which routes are being redistributed. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.3 |
alcatelIND1SpbIPVPNRedistVrfRouteMapThe route-map name (or empty-string for all-routes) for the filter to be applied to this route-redistribution.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.4 |
alcatelIND1SpbIPVPNRedistVrfRowStatusThe object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.5 |
alcatelIND1SpbIPVPNRedistIsidTableThe IP-VPN table of configured route-redistributions where the source entity is an ISID.
cf. show spb ipvpn redist SEQUENCE OF AlcatelIND1SpbIPVPNRedistIsidTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18 |
alcatelIND1SpbIPVPNRedistIsidTableEntryAn Entry in the alcatelIND1SpbIPVPNRedistIsidTable AlcatelIND1SpbIPVPNRedistIsidTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1 |
alcatelIND1SpbIPVPNRedistIsidTableEntryTopIxThe ISIS Topology Index identifier to which this
instance belongs. Each Topology Index defines logical topology
and is used to enable multiple SPB instances within several
ISIS instances. AlcatelIND1IsisSpbMTID .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.1 |
alcatelIND1SpbIPVPNRedistIsidSourceIsidThe source ISID from which routes are being redistributed. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.2 |
alcatelIND1SpbIPVPNRedistIsidDestIsidThe destination ISID to which routes are being redistributed. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.3 |
alcatelIND1SpbIPVPNRedistIsidRouteMapThe route-map name (or empty-string for all-routes) for the filter to be applied to this route-redistribution.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.4 |
alcatelIND1SpbIPVPNRedistIsidRowStatusThe object indicates the status of an entry, and is used
to create/delete entries.
This object is persistent.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.5 |
alcatelIND1IsisSpbConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2 |
alcatelIND1IsisSpbGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1 |
alcatelIND1IsisSpbCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.2 |