ALCATEL-IND1-IPRM-MIB
AI MIB Summary
The ALCATEL-IND1-IPRM-MIB provides SNMP access to configure and monitor global IPRM (IP Routing Manager) parameters on Alcatel-Lucent network devices, specifically managing IP routing protocol states, interface metrics, and forwarding table attributes.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for the configuration of IPRM global configuration parameters.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2010 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1IPRMMIB.1.3.6.1.4.1.6486.801.1.2.1.10.2.1
51
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
51 total| Object Name |
|---|
alcatelIND1IPRMMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of IPRM global configuration parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2010 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.10.2.1 |
alcatelIND1IPRMMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1 |
alaIprmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1 |
alaIprmRouteTableIPRM's Routing table. SEQUENCE OF AlaIprmRouteEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1 |
alaIprmRouteEntryA particular route to a particular destination AlaIprmRouteEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1 |
alaIprmRouteDestThe destination IP address of this route. IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.1 |
alaIprmRouteMaskThe mask of this route IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.2 |
alaIprmRouteTosThe TOS for this route Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.3 |
alaIprmRouteNextHopThe Gateway for this route IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.4 |
alaIprmRouteProtoThe protocol that this route was learned fromro IANAipRouteProtocol (IANA-RTPROTO-MIB) .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.5 |
alaIprmRouteMetricThe metric for this routero Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.6 |
alaIprmRoutePriorityThe priority for this routero Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.7 |
alaIprmStaticRouteTableIPRM's Static Route table. SEQUENCE OF AlaIprmStaticRouteEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2 |
alaIprmStaticRouteEntryA route entered by the user AlaIprmStaticRouteEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1 |
alaIprmStaticRouteDestThe destination IP address of this route. IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.1 |
alaIprmStaticRouteMaskThe mask of this route IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.2 |
alaIprmStaticRouteNextHopThe Gateway for this route IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.3 |
alaIprmStaticRouteMetricThe metric for this routerw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.4 |
alaIprmStaticRouteStatusThe status of this entry. Enabling causes a new
static route to be created, disabled causes that
static route to be deleted.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.5 |
alaIprmStaticRouteBfdStatusFor enabling or disabling the BFD status on this static route.rw AlaIprmAdminStatus .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.6 |
alaIprmStaticRouteTypeType of static route.rw AlaIprmStaticRouteTypes .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.7 |
alaIprmStaticRouteTagTag associated with static route.rw Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.8 |
alaIprmStaticRouteNameA comment associated with the static route.rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.9 |
alaIprmStaticAllBfdFor attempting to enable/disable the BFD state on all static routes.rw AlaIprmAdminStatus .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.3 |
alaIprmPrimaryAddressDefines the Primary IP Address of this Router.rw IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.4 |
alaIprmRouterIdDefines the Router-id for this Router.rw IpAddress .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.5 |
alaIprmRouteDistinguisherAssociates a route distinguisher to a VRF. Syntax for a route distinguisher and route target
as defined in [RFC4364].rw SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.6 |
alaIprmRouteTargetTableThis table specifies per-VRF route target association.
Each entry identifies a connectivity policy supported
as part of a VPN. SEQUENCE OF AlaIprmRouteTargetEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7 |
alaIprmRouteTargetEntryAn entry in this table is created by an LSR for
each route target configured for a VRF supporting
a MPLS L3VPN instance. See [RFC4364] for a
complete definition of a route target. AlaIprmRouteTargetEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1 |
alaIprmRouteTargetA Virtual Router Route Target. Syntax for a route distinguisher and route target
as defined in [RFC4364]. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.1 |
alaIprmRouteTargetTypeThe route target distribution type.rw AlaMplsL3VpnRouteType .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.2 |
alaIprmRouteTargetRowStatusThis variable is used to create, modify, and/or
delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.3 |
alaIprmRtPrefTableThis table specifies the route preference values for
various types of routes. SEQUENCE OF AlaIprmRtPrefTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8 |
alaIprmRtPrefTableEntryAn entry is in this table for each route preference type. AlaIprmRtPrefTableEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1 |
alaIprmRtPrefEntryTypeThe type of route (associated with a route preference value) AlaIprmRtPrefType .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1.1 |
alaIprmRtPrefEntryValueThe route preference value used for this type of route.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1.2 |
alaIprmExportRouteMapA route-map index representing the route-map used to filter
routes exported to the Global Route Table. A value of -1 indicates
no routes should be exported. A value of 0 indicates all routes
should be exported. Otherwise, the value is the route-map index to
use for filtering.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.9 |
alaIprmImportVrfTableThis table specifies VRFs to import routes from. SEQUENCE OF AlaIprmImportVrfEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10 |
alaIprmImportVrfEntryAn entry in this table is created for each VRF
to import routes from. AlaIprmImportVrfEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1 |
alaIprmImportVrfNameThe name of the VRF that routes should be imported from. An
empty string indicates the default VRF. SnmpAdminString .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.1 |
alaIprmImportVrfRouteMapA route-map index representing the route-map used to filter
imported routes.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.2 |
alaIprmImportVrfRowStatusThis variable is used to create, modify, and/or
delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.3 |
alaIprmImportIsidTableThis table specifies ISIS L3VPN ISIDs to import routes from. SEQUENCE OF AlaIprmImportIsidEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11 |
alaIprmImportIsidEntryAn entry in this table is created for each ISID
to import routes from. AlaIprmImportIsidEntry .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1 |
alaIprmImportIsidThe ISIS SPB L3VPN ISID that routes should be imported from. Unsigned32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.1 |
alaIprmImportIsidRouteMapA route-map index representing the route-map used to filter
imported routes.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.2 |
alaIprmImportIsidRowStatusThis variable is used to create, modify, and/or
delete a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.3 |
alaIprmExportToAllVrfsRouteMapUsed to export routes to all other VRFs that don't already have
an entry in the Import Vrf Table. The object is a route-map index
representing the route-map used to filter the exported routes.
A value of -1 indicates no routes should be exported. A value of 0
indicates all routes should be exported. Otherwise, the value is
the route-map index to use for filtering.rw Integer32 .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.12 |
alcatelIND1IPRMMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2 |
alcatelIND1IPRMMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.1 |
alcatelIND1IPRMMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.2 |