ALCATEL-IND1-ERP-MIB
AI MIB Summary
The ALCATEL-IND1-ERP-MIB provides SNMP management capabilities for Alcatel-Lucent's "Birds of Prey" Ethernet ring switching hardware, specifically exposing metrics and control parameters for Ethernet Ring Protection (ERP) state machines, ring topology status, and protection switching events.
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line ERP Switching is protection switching mechanism for ETH Layer Ethernet Ring topologies.
The right to make changes in specification and other information contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used.
Copyright (C) 1995-2008 Alcatel-Lucent, Incorporated ALL RIGHTS RESERVED WORLDWIDE
Main OID:
alcatelIND1ERPMIB.1.3.6.1.4.1.6486.801.1.2.1.46.1
57
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
57 total| Object Name |
|---|
alcatelIND1ERPMIBThis module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
For the Birds Of Prey Product Line
ERP Switching is protection switching mechanism for ETH Layer Ethernet Ring
topologies.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2008 Alcatel-Lucent, Incorporated
ALL RIGHTS RESERVED WORLDWIDE MODULE-IDENTITY .1.3.6.1.4.1.6486.801.1.2.1.46.1 |
alcatelIND1ErpMIBNotificationsBranch For ERP MIB Subsystem Notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.46.1.0 |
alaErpRingStateChangedThe ERP Ring State has changed to Protection from Idle. Notify the user by
raising the Trap. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.46.1.0.1 |
alaErpRingMultipleRplThe trap shall be raised on RPL if there are multiple RPLs detected in the
ring. When the RPL node receives the NR (RB) message, this trap is raised. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.46.1.0.2 |
alaErpRingRemovedThe trap shall be raised whenever the ring is removed dynamically in
Unlike NI Scenario only. NOTIFICATION-TYPE .1.3.6.1.4.1.6486.801.1.2.1.46.1.0.3 |
alcatelIND1ERPMIBObjectsBranch For ERP
Subsystem Managed Objects. OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.46.1.1 |
alaErpGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.1 |
alaErpClearStatsDefines the global clear statistics control for ERP.
The value reset (1) indicates that ERP should clear all
statistics related to all the rings in the system.
By default, this object contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.1.1 |
alaErpRingAttributes OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2 |
alaErpRingTableThere is one ERP Ring table per bridge. It permits
the configuration of Ring. SEQUENCE OF AlaErpRingEntry .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1 |
alaErpRingEntryThe ERP Ring table entry. AlaErpRingEntry .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1 |
alaErpRingIdRing identifier that is unique in the bridge.ro Integer32 (1 .. 2147483647) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.1 |
alaErpRingServiceVidAn integer indicating the VID of Service VLAN. All the ERP
control traffic will flow with Service VLAN tag across the
ring. This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object cannot be changed.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.2 |
alaErpRingMEGLevelMEG level of the R-APS PDU to be inserted for this Ring.
This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object cannot be changed.rw AlaErpRingMEGLevel .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.3 |
alaErpRingPort1This object is the interface index of the ring port,which is
either a bridge port, or an aggregated link within a bridge,
on which ring is configured.
There can be only two ring ports per ring in a bridge.
This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object cannot be changed.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.4 |
alaErpRingPort2This object is the interface index of the ring port,which is
either a bridge port, or an aggregated link within a bridge,
on which ring is configured.
In case of sub-ring, this will be zero. And that is the
indicator of sub-ring.
This object must be specified while creating a row in
this table. Once the row has been created, the value of
this object cannot be changed.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.5 |
alaErpRingStatusAn Integer value indicating the administrative state of the Ring.
enabled indicates that the Ring is to function normally, and
disabled that it is to cease functioning.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.6 |
alaErpRingStateThe current state of the Ring.ro Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.7 |
alaErpRingWaitToRestoreTimerThis object is valid only for RPL Node.
This timer is started to prevent frequent operation switch due
to an intermittent defect.
It may be configured by the operator in 1 minute steps between
0 and 12 minutes.rw Unsigned32 ( 0 .. 12) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.8 |
alaErpRingGuardTimerDefines the guard timer value in centiseconds.
This timer is started to prevent the ring nodes from receiving
outdated R-APS messages.
It may be configured by the operator in 10 ms steps between
10 ms to 2 seconds.rw Integer32 ( 1 .. 200) UNITS "10 milliseconds" .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.9 |
alaErpRingClearStatsDefines per ring clear statistics control for ERP.
The value reset (1) indicates that ERP should clear all
statistics related to a ring in the system.By default,
this object contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.10 |
alaErpRingLastStateChangeThe time (SysUpTime) at which the ethernet ring last
entered new state.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.11 |
alaErpRingTimeToRevertDefines the time left to revert from Pending State to Idle State.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.12 |
alaErpRingRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.13 |
alaErpRingVirtualChannelA Integer value indicating whether the ring is operating with the
Virtual channel enabled or not.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.14 |
alaErpRingRevertiveA Integer value indicating whether the ring is operating with the
revertive mode enabled or notrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.15 |
alaErpRingClearActionDefines clear action for ERP ring
The value reset(1) will give CLEAR action to ERP state machinerw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.16 |
alaErpRingActiveVersionThis object indicates active ERP Ring protocol version.ro Unsigned32 ( 1 .. 2) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.17 |
alaErpRingResetVersionFallbackResets ERP running protocolrw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.1.1.18 |
alaErpRingPortTableThere is one ERP Ring Port table per bridge. It permits
the configuration of Ring Ports. SEQUENCE OF AlaErpRingPortEntry .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2 |
alaErpRingPortEntryThe ERP Ring Port table entry. AlaErpRingPortEntry .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1 |
alaErpRingPortIfIndexThis object is the interface index of the interface either a
bridge port, or an aggregated link within a bridge port, to
which ring port is configured.
There can be only two ring ports per ring in a bridge. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.1 |
alaErpRingPortStatusStatus of the Ring Port.ro AlaErpRingPortStatus .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.2 |
alaErpRingPortTypeType of the Ring Port.
To configure a node as a RPL owner for the ring, this object
has value of RPL(2).rw AlaErpRingPortType .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.3 |
alaErpRingPortEthOAMEventA Boolean indicating whether ERP Ring Port shall take loss of
connectivity event from Ethernet OAM.
True indicates that the Ring Port is to take events from
Ethernet OAM.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.4 |
alaErpRingPortClearStatsDefines per ring port clear statistics control for ERP.
The value reset (1) indicates that ERP should clear all
statistics related to a ring port in the system.By default,
this object contains a zero value.rw Enumeration .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.5 |
alaErpRingPortRmepIdIdentifier of Remote Endpoint.rw AlaErpRingMepId .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.6 |
alaErpRingPortVirtualSfMonitorA Boolean indicating whether ERP Ring Port shall take loss of
connectivity event from Virtual SF monitor protocol.
True indicates that the Ring Port is to take events from
Virtual SF monitor.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.2.1.7 |
alaErpRingVlanTableThis table defines the association of VIDs and RingIds.
The writable objects in this table need to be persistent
upon reboot or restart of a device. SEQUENCE OF AlaErpRingVlanEntry .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3 |
alaErpRingVlanEntryThe VLAN table entry. AlaErpRingVlanEntry .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1 |
alaErpRingVlanProtectedVidAn integer indicating the VID of Protected VLAN. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1.1 |
alaErpRingVlanRowStatusThe status of the row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value before a row
can be activated.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.3.1.2 |
alaErpStatsTableThere is one ERP Stats table per bridge. This table
contains the statistics for the ERP on per Ring basis. SEQUENCE OF AlaErpStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4 |
alaErpStatsEntryThe Statistics table entry. AlaErpStatsEntry .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1 |
alaErpStatsSignalFailPduTxA count of the number of R-APS (SF) PDUs transmitted on this
interface for this Ring.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.1 |
alaErpStatsSignalFailPduRxA count of the number of valid R-APS (SF) PDUs received on this
interface for this Ring.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.2 |
alaErpStatsSignalFailPduDropA count of the number of valid R-APS (SF) PDUs dropped.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.3 |
alaErpStatsNoRequestPduTxA count of the number of R-APS (NR) PDUs transmitted on this
interface for this Ring.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.4 |
alaErpStatsNoRequestPduRxA count of the number of valid R-APS (NR) PDUs received on this
interface for this Ring.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.5 |
alaErpStatsNoRequestPduDropA count of the number of valid R-APS (NR) PDUs dropped.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.6 |
alaErpStatsRPLBlockPDUTxA count of the number of R-APS (NR, RB) PDUs transmitted on this
interface for this Ring.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.7 |
alaErpStatsRPLBlockPDURxA count of the number of valid R-APS (NR, RB) PDUs received on this
interface for this Ring.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.8 |
alaErpStatsRPLBlockPDUDropA count of the number of valid R-APS (NR, RB) PDUs dropped.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.9 |
alaErpStatsPDUErrA count of the number of error R-APS PDUs received.ro Counter32 .1.3.6.1.4.1.6486.801.1.2.1.46.1.1.2.4.1.10 |
alcatelIND1ERPMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.46.1.2 |
alcatelIND1ERPMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.46.1.2.1 |
alcatelIND1ERPMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6486.801.1.2.1.46.1.2.2 |
More MIBs from AL-Enterprise
Browse all AL-EnterpriseMIBs →ALCATEL-IND1-QOS-MIB
The ALCATEL-IND1-QOS-MIB enables monitoring and configuration of Quality of Service (QoS) policies, traffic shaping parameters, and access control list (ACL) filtering rules on Alcatel-Lucent network infrastructure. It provides visibility into queue depths, packet discard rates, and bandwidth allocation statistics to enforce service level agreements and traffic prioritization.
760 objects→
ALCATEL-IND1-SERVICE-MGR-MIB
The ALCATEL-IND1-SERVICE-MGR-MIB provides configuration parameters for the Alcatel-Lucent service manager feature, enabling the management of service provisioning, activation, and lifecycle states on carrier-grade network elements. This module facilitates the monitoring of service instance attributes and operational status to ensure correct delivery of managed services across the infrastructure.
453 objects→
ALCATEL-IND1-FIPS-MIB
The ALCATEL-IND1-FIPS-MIB module enables SNMP-based monitoring of MAC address learning tables and forwarding database states on Alcatel-Lucent Birds of Prey series network switches. It provides enterprise-specific access to layer 2 switching metrics, including learned MAC addresses and their associated port bindings, for traffic analysis and security auditing.
432 objects→
ALCATEL-IND1-BGP-MIB
The ALCATEL-IND1-BGP-MIB enables SNMP-based monitoring and configuration of Border Gateway Protocol (BGP) parameters on Alcatel-Lucent network devices, specifically tracking BGP session states, neighbor relationships, and protocol-specific counters. This module provides visibility into the operational status and performance metrics of BGP routing processes to facilitate network troubleshooting and policy enforcement.
396 objects→
ALCATEL-IND1-DEVICES
The ALCATEL-IND1-DEVICES MIB defines SNMP Object Identifiers for monitoring the physical inventory, chassis status, and module states of Alcatel-Lucent OmniSwitch 4000, 7000, 8000, and 9000 series networking hardware. It enables network management systems to retrieve device topology data, component presence, and hardware health indicators specific to these enterprise switching platforms.
267 objects→
ALCATEL-IND1-AAA-MIB
The ALCATEL-IND1-AAA-MIB provides SNMP access to monitor and manage Authentication, Authorization, and Accounting (AAA) subsystem metrics on Alcatel-Lucent "Birds of Prey" network hardware, specifically tracking user session states, authentication failures, and accounting records.
252 objects→