AISLCSYSCFG-MIB
AI MIB Summary
The AISLCSYSCFG-MIB module provides management access to system-level configuration parameters for Alcatel-Lucent SLC (Service Line Card) hardware, enabling the retrieval and modification of operational settings such as interface states, port configurations, and system resource thresholds.
MIB module for SLC system parameters.
Main OID:
aiSLCSysCfg.1.3.6.1.4.1.539.21
54
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
54 total| Object Name |
|---|
aii OBJECT IDENTIFIER .1.3.6.1.4.1.539 |
aiSLCSysCfgMIB module for SLC system parameters. MODULE-IDENTITY .1.3.6.1.4.1.539.21 |
aislcscSystemPromptPrompt for login shells. Maximum length is 80 characters.rw DisplayString .1.3.6.1.4.1.539.21.1 |
aislcscShellMinLogLevelMinimum message severity which will be logged to a shell connection.rw INTEGER .1.3.6.1.4.1.539.21.2 |
aislcscFtpPortTCP port for accepting FTP connections.rw INTEGER .1.3.6.1.4.1.539.21.3 |
aislcscTelnetPortTCP port for accepting Telnet connections.rw INTEGER .1.3.6.1.4.1.539.21.4 |
aiSLCSysCfgManagerTableTable of IP addresses to which SNMP traps will be sent, indexed by an integer. SEQUENCE OF AISLCSysCfgManagerEntry .1.3.6.1.4.1.539.21.5 |
aiSLCSysCfgManagerEntryEntry of aiSLCSysCfgManagerTable. AISLCSysCfgManagerEntry .1.3.6.1.4.1.539.21.5.1 |
aislcscManagerIndexIndex into this table of SNMP managers.ro PositiveInteger .1.3.6.1.4.1.539.21.5.1.1 |
aislcscManagerAddressSNMP manager IP address. 0.0.0.0 indicates an unused entry.rw IpAddress .1.3.6.1.4.1.539.21.5.1.2 |
aislcscManagerTrapPortSNMP manager trap port destination number.rw INTEGER .1.3.6.1.4.1.539.21.5.1.3 |
aislcscReadCommunitySNMP community string for read-only access.rw DisplayString .1.3.6.1.4.1.539.21.6 |
aislcscWriteCommunitySNMP community string for read-write access.rw DisplayString .1.3.6.1.4.1.539.21.7 |
aislcsctl1SourceIDTL1 source identifier. Maximum length is 20 characters.rw DisplayString .1.3.6.1.4.1.539.21.8 |
aislcsctl1LogonRequiredIndicates whether or not an ACT-USER command is required for TL1 access.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.539.21.9 |
aislcsctl1NumBadLogonsThe number of failed TL1 logons that have occurred since the last successful logon.ro PositiveInteger .1.3.6.1.4.1.539.21.10 |
aislcscExtProbeStatusThis is the state of the external temperature probe. It is either available or unavailable.ro Enumeration .1.3.6.1.4.1.539.21.11 |
aislcscExtLowThreshCelsiusThe lower threshold for the external temperature probe, in degrees Celsius. When the temperature drops below this value, an SNMP trap is sent.rw INTEGER (-54..124) UNITS "degrees Celsius" .1.3.6.1.4.1.539.21.12 |
aislcscExtHighThreshCelsiusThe upper threshold for the external temperature probe, in degrees Celsius. When the temperature rises above this value, an SNMP trap is sent.rw INTEGER (-54..124) UNITS "degrees Celsius" .1.3.6.1.4.1.539.21.13 |
aislcscExtTempCelsiusThe current external temperature (Celsius).ro INTEGER (-55..125) UNITS "degrees Celsius" .1.3.6.1.4.1.539.21.14 |
aislcscIntProbeStatusThis is the state of the internal temperature probe. It is either available or unavailable.ro Enumeration .1.3.6.1.4.1.539.21.15 |
aislcscIntLowThreshCelsiusThe lower threshold for the internal temperature probe, in degrees Celsius. When the temperature drops below this value, an SNMP trap is sent.rw INTEGER (-54..124) UNITS "degrees Celsius" .1.3.6.1.4.1.539.21.16 |
aislcscIntHighThreshCelsiusThe upper threshold for the internal temperature probe, in degrees Celsius. When the temperature rises above this value, an SNMP trap is sent.rw INTEGER (-54..124) UNITS "degrees Celsius" .1.3.6.1.4.1.539.21.17 |
aislcscIntTempCelsiusThe current internal temperature (Celsius).ro INTEGER (-55..125) UNITS "degrees Celsius" .1.3.6.1.4.1.539.21.18 |
aislcscExceededThresholdValueThe temperature sent with the last trap (Celsius).ro INTEGER (-55..125) UNITS "degrees Celsius" .1.3.6.1.4.1.539.21.19 |
aiSLCSysCfgKeepAliveTableTable of IP addresses which will be pinged periodically. SEQUENCE OF AISLCSysCfgKeepAliveEntry .1.3.6.1.4.1.539.21.20 |
aiSLCSysCfgKeepAliveEntryEntry of aiSLCSysCfgKeepAliveTable. AISLCSysCfgKeepAliveEntry .1.3.6.1.4.1.539.21.20.1 |
aislcscKeepAliveIndexIndex into this table.ro PositiveInteger .1.3.6.1.4.1.539.21.20.1.1 |
aislcscKeepAliveAddressIP address of network element to ping. 0.0.0.0 indicates an unused entry.rw IpAddress .1.3.6.1.4.1.539.21.20.1.2 |
aislcscKeepAliveIntervalTime between successive pings of the network element. Allowable values are 5 to 600 seconds.rw INTEGER .1.3.6.1.4.1.539.21.20.1.3 |
aislcscKeepAliveWarningTextMessage sent in SNMP trap when the network element stops responding to pings. Maximum length is 64 characters.rw DisplayString .1.3.6.1.4.1.539.21.20.1.4 |
aislcscKeepAliveOKTextMessage sent in SNMP trap when the network element begins responding to pings after a period of unresponsiveness. Maximum length is 64 characters.rw DisplayString .1.3.6.1.4.1.539.21.20.1.5 |
aislcscKeepAliveCommStatDetermines the current communication status between the system and the target equipment. If the target equipment does not respond to pings, this object will be set to lost(3). This object will be set to disabled(1) if no IP address is configured.ro Enumeration .1.3.6.1.4.1.539.21.20.1.6 |
aislcscActiveConfigNameName of the active configuration file. Maximum length is 255 characters; additional restrictions are system-dependent.rw DisplayString .1.3.6.1.4.1.539.21.21 |
aislcscActiveConfigCRC32-bit CRC of the active configuration file.ro INTEGER (0..'ffffffff'h) .1.3.6.1.4.1.539.21.22 |
aislcscSoftwareUpdateNameTo update the system software, set this object to the name of the new image file, and monitor aislcscSoftwareUpdateStatus until it changes to ok(1) or error(3). If the update succeeds, the new software will be used after the system is rebooted. Maximum length is 255 characters; additional restrictions are system-dependent.rw DisplayString .1.3.6.1.4.1.539.21.23 |
aislcscSoftwareUpdateStatusSee aislcscSoftwareUpdateName for a description of how to use this object. ready(1) -- ready to update software (read-write) inProgress(2) -- update is in progress (read-only) ok(3) -- update completed successfully (read-only) error(4) -- update failed (read-only)rw Enumeration .1.3.6.1.4.1.539.21.24 |
aislcscResetSystemWhen read, this object is always none(1). Setting none(1) has no effect. Setting coldStart(2) reboots the system.rw Enumeration .1.3.6.1.4.1.539.21.25 |
aislcscDiscPowerSupplyStatusStatus of the power supply. okay(1) or trouble(2). When the SLC is booted, this indicates okay(1) until the software determines the correct status.ro Enumeration .1.3.6.1.4.1.539.21.26 |
aislcsc48VSupplyAStatusStatus of the 'A' 48V power supply.ro Enumeration .1.3.6.1.4.1.539.21.27 |
aislcsc48VSupplyBStatusStatus of the 'B' 48V power supply.ro Enumeration .1.3.6.1.4.1.539.21.28 |
aislcscFanStatusStatus of the fan unit.ro Enumeration .1.3.6.1.4.1.539.21.29 |
aislcscMib2ReadCommunitySNMP community string for read-only access with mib-2 view.rw DisplayString .1.3.6.1.4.1.539.21.30 |
aislcscOverallAlarmSeverityCurrent overall alarm severity (0-7). This value can be set at the user's discretion, but will be overwritten when the next alarm is generated.rw INTEGER .1.3.6.1.4.1.539.21.31 |
aislcSysCfgTime OBJECT IDENTIFIER .1.3.6.1.4.1.539.21.32 |
aislcscTimeZoneThe current Time Zone of the system in the following format: <+|->HH:MM, where HH is the number of hours and MM is the number of minutes. <+/-> specifies the East/West direction. For example, EDT would be displayed as: -05:00rw DisplayString .1.3.6.1.4.1.539.21.32.1 |
aislcscDayLightSavingIndicates whether Daylight saving is enabled.rw Enumeration .1.3.6.1.4.1.539.21.32.2 |
aislcscSntpPollIndicates whether the SNTP client is enabled on this system.rw Enumeration .1.3.6.1.4.1.539.21.32.3 |
aislcscNtpServerAddr1IP address of the primary NTP Serverrw IpAddress .1.3.6.1.4.1.539.21.32.4 |
aislcscNtpServerAddr2IP address of the secondary NTP Serverrw IpAddress .1.3.6.1.4.1.539.21.32.5 |
aislcscSntpPollIntervalSNTP poll interval in minutesrw INTEGER .1.3.6.1.4.1.539.21.32.6 |
aislcscStandaloneStatusstandalone(1): The card is operating standalone (no external CLC). nonStandalone(2): The card is operating as a line card with a CLC.ro Enumeration .1.3.6.1.4.1.539.21.33 |
aislcscShellPromptTimeoutTime in minutes before an idle shell is automatically closed. 0 indicates no timeout.rw INTEGER .1.3.6.1.4.1.539.21.34 |
aislcscDestMenuBreakSeqSequence of characters to exit a connection made from the destination menu.rw DisplayString .1.3.6.1.4.1.539.21.35 |