AI198CLC-MIB
AI MIB Summary
The AI198CLC-MIB facilitates SNMP-based monitoring and management of Series 1 Common Logic Controllers (CLCs), enabling the retrieval of operational status, alarm states, and performance counters for these industrial automation devices.
The MIB Module for Series 1 Common Logic Controllers (CLC)
Main OID:
aiCLC.1.3.6.1.4.1.539.9
217
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
217 total| Object Name |
|---|
aii OBJECT IDENTIFIER .1.3.6.1.4.1.539 |
aiSystemOID OBJECT IDENTIFIER .1.3.6.1.4.1.539.2 |
ai198 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198 |
ai198Ver1 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1 |
ai198Ver10 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1.0 |
ai198Ver102 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1.0.2 |
ai198Ver103 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1.0.3 |
ai198Ver104 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1.0.4 |
ai198Ver12 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1.2 |
ai198Ver120 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1.2.0 |
ai198Ver13 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1.3 |
ai198Ver130 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.198.1.3.0 |
aiCLCThe MIB Module for Series 1 Common Logic Controllers (CLC) MODULE-IDENTITY .1.3.6.1.4.1.539.9 |
aiCLCSystem OBJECT IDENTIFIER .1.3.6.1.4.1.539.9.1 |
aiCLCBox1DensAdminThe administration value for the slot density for Chassis 1 of and AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.1.1 |
aiCLCBox2DensAdminThe administration value for the slot density for Chassis 2 of and AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.1.2 |
aiCLCBox3DensAdminThe administration value for the slot density for Chassis 3 of and AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.1.3 |
aiCLCBox4DensAdminThe administration value for the slot density for Chassis 4 of and AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.1.4 |
aiCLCBox5DensAdminThe administration value for the slot density for Chassis 5 of and AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.1.5 |
aiCLCBox6DensAdminThe administration value for the slot density for Chassis 6 of and AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.1.6 |
aiCLCBox7DensAdminThe administration value for the slot density for Chassis 7 of and AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.1.7 |
aiCLCBox8DensAdminThe administration value for the slot density for Chassis 8 of and AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.1.8 |
aiCLCNodeNameThis associates a name with an AI Switch. This string is part of the prompt for a user port.rw DisplayString .1.3.6.1.4.1.539.9.1.9 |
aiCLCLogPortEnableEnable/Disable the display of Alarm and Activity Information.rw Enumeration .1.3.6.1.4.1.539.9.1.10 |
aiCLCAlmLogPortThe Alarm and Activity Log Port Number.rw INTEGER .1.3.6.1.4.1.539.9.1.11 |
aiCLCActLogLvlThe alarm level which when met or exceeded will cause messages to be printed on the log port.rw INTEGER .1.3.6.1.4.1.539.9.1.12 |
aiCLCMinorAlmMinThe alarm level which when met or exceeded will cause a minor alarm to be reported.rw INTEGER .1.3.6.1.4.1.539.9.1.13 |
aiCLCMinorAlmMaxThe alarm level which when exceeded will not cause a minor alarm to be reported.rw INTEGER .1.3.6.1.4.1.539.9.1.14 |
aiCLCMajorAlmMinThe alarm level which when met or exceeded will cause a major alarm to be reported.rw INTEGER .1.3.6.1.4.1.539.9.1.15 |
aiCLCMajorAlmMaxThe alarm level which when exceeded will not cause a major alarm to be reported.rw INTEGER .1.3.6.1.4.1.539.9.1.16 |
aiCLCCraftLogEchoEcho Alarm and Activity information on the craft port.rw Enumeration .1.3.6.1.4.1.539.9.1.17 |
aiCLCCaamlRouteName of the destination used for the CAAML Log.rw DisplayString .1.3.6.1.4.1.539.9.1.18 |
aiCLCCaamlIdleTmrThe number of seconds that must pass without any messages being printed on CAAML, before the CAAML connection is torn down.rw INTEGER .1.3.6.1.4.1.539.9.1.19 |
aiCLCCaamlRetryTmrThe number of seconds that must pass after an unsuccessful attempt at bringing the CAAML connection up before a retry will occur.rw INTEGER .1.3.6.1.4.1.539.9.1.20 |
aiCLCConnInfoPrint connection information on user terminals.rw Enumeration .1.3.6.1.4.1.539.9.1.21 |
aiCLCLongBrkLenLong Break length in milliseconds rounded to the nearest 1/64th second.rw INTEGER .1.3.6.1.4.1.539.9.1.22 |
aiCLCDestMenuPrint Destination Menu on user terminals.rw Enumeration .1.3.6.1.4.1.539.9.1.23 |
aiCLCDownSpdAllow ports of different speeds to be connected.rw Enumeration .1.3.6.1.4.1.539.9.1.24 |
aiCLCFaultSwitchIn dual CLC systems, a fault on the active CLC will cause automatic switchover from the faulted CLC to the backup CLC.rw Enumeration .1.3.6.1.4.1.539.9.1.25 |
aiCLCDestMenuFmtThe number of columns used to print the destination menu.rw Enumeration .1.3.6.1.4.1.539.9.1.26 |
aiCLCAutoCLCUpdateAutomatic configuration of the backup CLC when the active CLC's configuration changes.rw Enumeration .1.3.6.1.4.1.539.9.1.27 |
aiCLCAlarmLvlCurrent Alarm Level. A write clears the alarms. A read returns the current alarm level.rw INTEGER .1.3.6.1.4.1.539.9.1.28 |
aiCLCTimeDateThis is the Current Time and Date. The DateAndTime type is a structured OCTET STRING, defined in v2-tc.my (SNMPv2 Textual Conventions).rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.539.9.1.29 |
aiCLCRstTimeDateThis is the Time and Date of Last Reset. The DateAndTime type is a structured OCTET STRING, defined in v2-tc.my (SNMPv2 Textual Conventions).ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.539.9.1.30 |
aiCLCHoldConnNumber of connections placed on holdro INTEGER .1.3.6.1.4.1.539.9.1.31 |
aiCLCNumPortsNumber of ports detectedro INTEGER .1.3.6.1.4.1.539.9.1.32 |
aiCLCQueuedPortsNumber of ports in wait queuero INTEGER .1.3.6.1.4.1.539.9.1.33 |
aiCLCEEPromFaultsNumber of EEProm failuresro INTEGER .1.3.6.1.4.1.539.9.1.34 |
aiCLCFreeEENumber of free EEProm bytesro Integer32 .1.3.6.1.4.1.539.9.1.35 |
aiCLCBuffersNumber of buffers createdro INTEGER .1.3.6.1.4.1.539.9.1.36 |
aiCLCFreeBuffersNumber of free buffersro INTEGER .1.3.6.1.4.1.539.9.1.37 |
aiCLCBufAllocErrNumber of buffer allocation errorsro INTEGER .1.3.6.1.4.1.539.9.1.38 |
aiCLCBufAlignNumber of buffer re-alignmentsro INTEGER .1.3.6.1.4.1.539.9.1.39 |
aiCLCCpuXactsNumber of inter-cpu transactionsro INTEGER .1.3.6.1.4.1.539.9.1.40 |
aiCLCSLCXactsNumber of SLC Window transactionsro INTEGER .1.3.6.1.4.1.539.9.1.41 |
aiCLCConnectionsPlacedNumber of connections placedro INTEGER .1.3.6.1.4.1.539.9.1.42 |
aiCLCTxTailNumber of TXTail missesro INTEGER .1.3.6.1.4.1.539.9.1.43 |
aiCLCEECRCConfiguration EEPROM CRC.ro INTEGER (0..'ffffffff'h) .1.3.6.1.4.1.539.9.1.44 |
aiCLCVersionSoftware version, time, and date of currently executing softwarero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.1.45 |
aiCLCBackupCLCStatus of the Backup CLC.ro Enumeration .1.3.6.1.4.1.539.9.1.46 |
aiCLCCpuThe location of the active CLC.ro Enumeration .1.3.6.1.4.1.539.9.1.47 |
aiCLCCpyConfigCopy configuration from active CLC to backup CLC. A write of copy(2) causes the transfer to begin. A read will return copy(2) if a transfer is in progress and a none(1) if idle. A write of none(1) is not permitted and is flagged as an error.rw Enumeration .1.3.6.1.4.1.539.9.1.48 |
aiCLCDLWinVerboseVerbose report of Window Transactions.rw Enumeration .1.3.6.1.4.1.539.9.1.49 |
aiCLCDLWinInVerbose report of incoming Window Transactions.rw Enumeration .1.3.6.1.4.1.539.9.1.50 |
aiCLCDLWinOutVerbose report of outgoing Window Transactions.rw Enumeration .1.3.6.1.4.1.539.9.1.51 |
aiCLCDLWinUniVerbose report of unified Window Transactions.rw Enumeration .1.3.6.1.4.1.539.9.1.52 |
aiCLCDLMsgAllVerbose report of log messages.rw Enumeration .1.3.6.1.4.1.539.9.1.53 |
aiCLCDLNoBodyReport log messages headers only.rw Enumeration .1.3.6.1.4.1.539.9.1.54 |
aiCLCDLAliasVerbose report of alias translations.rw Enumeration .1.3.6.1.4.1.539.9.1.55 |
aiCLCDebugValValue of the debug variable representing all debug combinations.rw INTEGER (0.. '8f'h) .1.3.6.1.4.1.539.9.1.56 |
aiCLCSwitchRestartA write of this object causes the switch to be restarted in the designated mode. A read of this object always returns the value restart(1), which has no particular significance.rw Enumeration .1.3.6.1.4.1.539.9.1.57 |
aiCLCInitStringsThis object is used to test the condition of the strings on the CLC. A read of this object causes the test to be performed and then reports the outcome.ro Enumeration .1.3.6.1.4.1.539.9.1.58 |
aiCLCCopyFlashCopy Flash from one bank to another. AP - Active Primary AS - Active Secondary BP - Backup Primary BS - Backup Secondary A read returns a value corresponding to the activity in progress. A write causes the requested transfer to begin. A write of none(1) is not permitted and is flagged as an error.rw Enumeration .1.3.6.1.4.1.539.9.1.59 |
aiCLCCopyFlashToSLCThis object is used to begin or obtain the status of the SLC Download process. Writing a SLC base port to this object will cause the SLC at that baseport to search for new firmware on the active or backup CLC. If a valid SLC image is located, then the SLC will download that code and begin to run. A read of this variable will return the value 1 if a SLC download is in process, or a 0 if there aren't downloads in progress.rw INTEGER .1.3.6.1.4.1.539.9.1.60 |
aiCLCReadCommunityThe read community string for the CLC.rw DisplayString .1.3.6.1.4.1.539.9.1.61 |
aiCLCWriteCommunityThe write community string for the CLC.rw DisplayString .1.3.6.1.4.1.539.9.1.62 |
aiCLCIPAdrsThe IP address for the CLC.rw IpAddress .1.3.6.1.4.1.539.9.1.63 |
aiCLCRouterIPAdrsThe router ip address for the CLC.rw IpAddress .1.3.6.1.4.1.539.9.1.64 |
aiCLCSubnetIPAdrsThe subnet mask for the CLC.rw IpAddress .1.3.6.1.4.1.539.9.1.65 |
aiCLCTrapTableA table of Trap destination IP addresses. SEQUENCE OF AiCLCTrapTableEntry .1.3.6.1.4.1.539.9.1.66 |
aiCLCTrapTableEntryInformation about a particular Trap destination. AiCLCTrapTableEntry .1.3.6.1.4.1.539.9.1.66.1 |
aiCLCTrapIPAdrsThe IP Address of the destination to which SNMP Traps will be sent.rw IpAddress .1.3.6.1.4.1.539.9.1.66.1.1 |
aiCLCTrapRowStatusThe aiCLC Trap Table entry row status.rw Enumeration .1.3.6.1.4.1.539.9.1.66.1.2 |
aiCLCLastTrapMsgTextThis is the message text associated with the last generated trap.ro DisplayString .1.3.6.1.4.1.539.9.1.67 |
aiCLCLastTrapMsgNumThis is the message number of the last generated trap log message.ro INTEGER (0..'ffff'h) .1.3.6.1.4.1.539.9.1.68 |
aiCLCCrashMsgTextThis is a place holder. It is required to allow verification of OID of trap crash message object. A read of this object will return an empty string.ro DisplayString .1.3.6.1.4.1.539.9.1.69 |
aiCLCNumEventsSinceLastTrapThis is the number of times an event that would generate a trap has occurred since the last time that trap was transmitted. The traps are not transmitted while the aiCLCTrapTimer is running. This number will accompany the next transmitted trap. This object is really a place holder. It is required to allow verification of the OID of this information in a trap (var-bind). A read of this object will result in an error from the snmp agent.ro INTEGER (0..'ffff'h) .1.3.6.1.4.1.539.9.1.70 |
aiCLCTrapTimerAfter a trap is generated, a timer is started. If the event that generated the trap occurs while the timer is running, no trap will be generated for the event. The value of this object is the duration of the timer in SECONDS.rw INTEGER (5..'ffff'h) .1.3.6.1.4.1.539.9.1.71 |
aiCLCAsyncTrapWhen this object is enabled, link up/link down traps are sent to managers listed in the trap table. The traps are normally not used and must specifically be enabled by a manager.rw Enumeration .1.3.6.1.4.1.539.9.1.72 |
aiCLCTelnetServerPortThe tcp port number used by the telnet server may be configured using the aiCLCTelnetServerPort object. By default this object uses the well known port number 23.rw INTEGER .1.3.6.1.4.1.539.9.1.73 |
aiCLCColdStartTrapDelayThe sending of the cold start trap may be delayed to allow system startup and link startup to occur. This will typically be done on systems using IP over X.25 links. This value is specified in seconds.rw INTEGER .1.3.6.1.4.1.539.9.1.74 |
aiCLCFtpCtrlPortThe FTP Server control port number. New values for this object take affect after a reset. The FTP Server data port is automatically selected to be one less than the control port.rw INTEGER .1.3.6.1.4.1.539.9.1.75 |
aiCLCBackupCLCHealthHealth status of the Backup CLC.ro Enumeration .1.3.6.1.4.1.539.9.1.76 |
aiCLCBannerThe banner for the CLC. There is a maximum 15 lines with 76 characters allowed per line.rw DisplayString .1.3.6.1.4.1.539.9.1.77 |
aiCLCTimeZoneThe time zone offset for the CLC in minutes.rw INTEGER (-720..720) .1.3.6.1.4.1.539.9.1.78 |
aiCLCDaylightSavingsDaylight Savingsrw Enumeration .1.3.6.1.4.1.539.9.1.79 |
aiCLCSNTPSNTPrw Enumeration .1.3.6.1.4.1.539.9.1.80 |
aiCLCSNTPPrimaryServerThe IP address for the Primary SNTP Server.rw IpAddress .1.3.6.1.4.1.539.9.1.81 |
aiCLCSNTPSecondaryServerThe IP address for the Secondary SNTP Server.rw IpAddress .1.3.6.1.4.1.539.9.1.82 |
aiCLCSNTPPollIntervalSNTP Poll Intervalrw INTEGER .1.3.6.1.4.1.539.9.1.83 |
aiCLCRadiusEnabledRADIUS enabled/disabled state.rw Enumeration .1.3.6.1.4.1.539.9.1.84 |
aiCLCRadiusAddr1The IP address for the Primary RADIUS Server.rw IpAddress .1.3.6.1.4.1.539.9.1.85 |
aiCLCRadiusPort1The port number associated with the Primary RADIUS Server.rw INTEGER .1.3.6.1.4.1.539.9.1.86 |
aiCLCRadiusSecret1The Secret for the Primary RADIUS Server.rw DisplayString .1.3.6.1.4.1.539.9.1.87 |
aiCLCRadiusAddr2The IP address for the Secondary RADIUS Server.rw IpAddress .1.3.6.1.4.1.539.9.1.88 |
aiCLCRadiusPort2The port number associated with the Secondary RADIUS Server.rw INTEGER .1.3.6.1.4.1.539.9.1.89 |
aiCLCRadiusSecret2The Secret for the Secondary RADIUS Server.rw DisplayString .1.3.6.1.4.1.539.9.1.90 |
aiCLCTrapIntervalThe interval of the faulted primary CLC trap. If the primary CLC was faulted and the interval was set between 1 and 65535 minutes, the backup CLC will repeatedly send the faulted primary CLC trap. To disable this trap, set the interval to 0. If reset the interval to 0 after the primary CLC has been faulted, the backup CLC will stop sending the trap. New value for this object will take affect without rebooting the switch. This object has no effect on other traps.rw INTEGER .1.3.6.1.4.1.539.9.1.91 |
aiCLCTacacsEnabledTACACS+ enabled/disabled state.rw Enumeration .1.3.6.1.4.1.539.9.1.92 |
aiCLCTacacsAddr1The IP address for the Primary TACACS Server.rw IpAddress .1.3.6.1.4.1.539.9.1.93 |
aiCLCTacacsPort1The port number associated with the Primary TACACS Server.rw INTEGER .1.3.6.1.4.1.539.9.1.94 |
aiCLCTacacsSecret1The Secret for the Primary TACACS Server.rw DisplayString .1.3.6.1.4.1.539.9.1.95 |
aiCLCTacacsAddr2The IP address for the Secondary TACACS Server.rw IpAddress .1.3.6.1.4.1.539.9.1.96 |
aiCLCTacacsPort2The port number associated with the Secondary TACACS Server.rw INTEGER .1.3.6.1.4.1.539.9.1.97 |
aiCLCTacacsSecret2The Secret for the Secondary TACACS Server.rw DisplayString .1.3.6.1.4.1.539.9.1.98 |
aiCLCCardTableA table of line cards contained in an AISwitch. SEQUENCE OF AiCLCCardTableEntry .1.3.6.1.4.1.539.9.2 |
aiCLCCardTableEntryInformation about a particular line card. AiCLCCardTableEntry .1.3.6.1.4.1.539.9.2.1 |
aiCLCCTIndexThe card table index.rw INTEGER .1.3.6.1.4.1.539.9.2.1.1 |
aiCLCCTAdminStatusThis represents the state of the card and may be used to change the state of the card. For DUMB cards if one port on the card is up, then the entire card is considered to be up.rw Enumeration .1.3.6.1.4.1.539.9.2.1.2 |
aiCLCCTBasePortThe base port number for the line card.rw INTEGER .1.3.6.1.4.1.539.9.2.1.3 |
aiCLCCTHighPortThe highest port number accessible by the line card.ro INTEGER .1.3.6.1.4.1.539.9.2.1.4 |
aiCLCCTRdCommStrThe SNMP read community string by which this card is known.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.2.1.5 |
aiCLCCTWrCommStrThe SNMP write community string by which this card is known.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.2.1.6 |
aiCLCCTCardSnmpStateThis field describes the capabilities of the card. A card may not be snmp capable and will have the value nosnmp(1). A card may be snmp capable but isn't present on the IP network. This card is may proxied for and will have the type snmpProxy(2). The last type of snmp capability is where are card is present on the IP network and can be managed directly. This card will have a type of snmpDirect(3).ro Enumeration .1.3.6.1.4.1.539.9.2.1.7 |
aiCLCCTCardTypeThe line card type.rw Enumeration .1.3.6.1.4.1.539.9.2.1.8 |
aiCLCCTSlotExpThe number of slots the line card is to logically occupy.rw INTEGER .1.3.6.1.4.1.539.9.2.1.9 |
aiCLCCTIPAdrsThe IP address associated with the line card.rw IpAddress .1.3.6.1.4.1.539.9.2.1.10 |
aiCLCCTRtrIPAdrsThe router ip address for this line card.rw IpAddress .1.3.6.1.4.1.539.9.2.1.11 |
aiCLCCTSubnetMaskThe subnet mask for this line card.rw IpAddress .1.3.6.1.4.1.539.9.2.1.12 |
aiCLCCTAutoIdIndexThe index into the Auto Id table associated with this line card.ro INTEGER .1.3.6.1.4.1.539.9.2.1.13 |
aiCLCCTSysOIDThe SNMP System OID associated with this line card.ro OBJECT IDENTIFIER .1.3.6.1.4.1.539.9.2.1.14 |
aiCLCCTRealCardTypeThe real line card type.ro Enumeration .1.3.6.1.4.1.539.9.2.1.15 |
aiCLCCTIPRangeThe IP address range of this line card.rw INTEGER .1.3.6.1.4.1.539.9.2.1.16 |
aiCLCCTTelnetPortThe telnet port of this line card.rw INTEGER .1.3.6.1.4.1.539.9.2.1.17 |
aiCLCCTCardResetCard is included when * is used with STPSLC, DISABL, or ENABL.rw Enumeration .1.3.6.1.4.1.539.9.2.1.18 |
aiCLCCTLastSequenceNumberThis is the sequence number of the last trap sent by this card. The sequence number starts at zero following a hardware reset or power-up. When the sequence number reaches 0xffffffff, it rolls over to 0 on the next trap.ro Counter32 .1.3.6.1.4.1.539.9.2.1.19 |
aiCLCCTRtr2IPAdrsThe secondary router ip address for this line card.rw IpAddress .1.3.6.1.4.1.539.9.2.1.20 |
aiCLCPortTableA table of port information. SEQUENCE OF AiCLCPortTableEntry .1.3.6.1.4.1.539.9.3 |
aiCLCPortTableEntryInformation unique to a particular port. AiCLCPortTableEntry .1.3.6.1.4.1.539.9.3.1 |
aiCLCPortNumberThe AISwitch Port Number associated with the entry.ro INTEGER .1.3.6.1.4.1.539.9.3.1.1 |
aiCLCPortTypeThis is used to configure how the port is being used.rw Enumeration .1.3.6.1.4.1.539.9.3.1.2 |
aiCLCPortDedicatedThe port number to which this port is dedicated when the type is 'dedicated'.rw INTEGER .1.3.6.1.4.1.539.9.3.1.3 |
aiCLCPortDestNameThe destination to which this port is assigned.rw DisplayString .1.3.6.1.4.1.539.9.3.1.4 |
aiCLCPortEchoThis determines whether echoing is on when the port is connected to the AISwitch.rw Enumeration .1.3.6.1.4.1.539.9.3.1.5 |
aiCLCPortDestMenuThis determines whether the destination menu is displayed when the port type is 'user'.rw Enumeration .1.3.6.1.4.1.539.9.3.1.6 |
aiCLCPortQueueThis determines whether the port is allowed to be put on hold when the destination port is busy.rw Enumeration .1.3.6.1.4.1.539.9.3.1.7 |
aiCLCSLCProtocolCodeThis is the slc protocol processing code.rw INTEGER .1.3.6.1.4.1.539.9.3.1.8 |
aiCLCPortStateThis is used to determine whether the port is enabled or disabled.ro Enumeration .1.3.6.1.4.1.539.9.3.1.9 |
aiCLCPortStatusThis value is the port status which include the following values; idle(1), selecting class of service selcos(2), entering password pswd(3), entering username(4), entering destination network address dna(5), entering a TCP address tcp(6), answering 'wish to queue' queue(7), answering 'wish to hold' holdq(8), connected to switch ai(9), connected conn(10), in the process of connecting preconn(11), in the process of disconnecting predisc(12), hold(13), network connect pending netconn(14), performing a file transfer file(15), inactive inact(16), slc is receiving software download swdwn(17), port is using a telnet client telnetClient(18), unknown(20).ro Enumeration .1.3.6.1.4.1.539.9.3.1.10 |
aiCLCPortAlmThe current alarm value for the port.ro INTEGER .1.3.6.1.4.1.539.9.3.1.11 |
aiCLCPortDescThis is used to describe the port in textual form.rw DisplayString .1.3.6.1.4.1.539.9.3.1.12 |
aiCLCPortResetPort is included when * is used with DISABL or ENABL.rw Enumeration .1.3.6.1.4.1.539.9.3.1.13 |
aiCLCAliasTableA table of call alias information. SEQUENCE OF AiCLCAliasTableEntry .1.3.6.1.4.1.539.9.4 |
aiCLCAliasTableEntryInformation unique to a particular alias. AiCLCAliasTableEntry .1.3.6.1.4.1.539.9.4.1 |
aiCLCAliasIndexThe alias name in the form of a DisplayString. This is the key field for the Alias Table.rw DisplayString .1.3.6.1.4.1.539.9.4.1.1 |
aiCLCAliasRowStatusThe Alias Table Entry row status.rw Enumeration .1.3.6.1.4.1.539.9.4.1.2 |
aiCLCXlatTypeThe type of alias translation to be performed.rw Enumeration .1.3.6.1.4.1.539.9.4.1.3 |
aiCLCAliasDestNameThe destination to be used for the alias.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.4 |
aiCLCCalledAdrsThe called address used in the macro.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.5 |
aiCLCAliasDestMenuThis determines whether the alias appears on the destination menu.rw Enumeration .1.3.6.1.4.1.539.9.4.1.6 |
aiCLCLinkNumThe link number or alias macro used for the link number.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.7 |
aiCLCCallerAdrsThe caller address used in the macro.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.8 |
aiCLCCallDataThe call data which may be a destination or an alias macro.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.9 |
aiCLCApplicStringThe application string which may be a string or an alias macro.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.10 |
aiCLCCalledProtoStrThe string that may specify the called protocol for a call using the alias macro.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.11 |
aiCLCCallerProtoStrThe string that may specify the calling protocol for a call using the alias macro.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.12 |
aiCLCAlternRouteThe string may specify a destination or an alias macro that is used as an alternate route.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.4.1.13 |
aiCLCAliasPositionThe position of the alias in the alias list. When 'set' a new or an existing alias, this value can be used as a flag to request a saving to the beginning (0) or to the end (99999) of the alias list. As default, the CLC always saves a new alias to the end and a modified alias to its old position.rw DisplayString .1.3.6.1.4.1.539.9.4.1.14 |
aiCLCDestTableThis table contains information pertaining to destinations and their attributes. SEQUENCE OF AiCLCDestTableEntry .1.3.6.1.4.1.539.9.5 |
aiCLCDestTableEntryThis information pertains to one entry in the destination table. AiCLCDestTableEntry .1.3.6.1.4.1.539.9.5.1 |
aiCLCDestNameThe name of the destination in the form of an OCTET STRING.rw DisplayString .1.3.6.1.4.1.539.9.5.1.1 |
aiCLCDestRowStatusThe key field for the Destination table entry.rw Enumeration .1.3.6.1.4.1.539.9.5.1.2 |
aiCLCDestCallInitThis is used to turn on or turn off call initiation on ports assigned to this destination.rw Enumeration .1.3.6.1.4.1.539.9.5.1.3 |
aiCLCDestDiscThis is used to turn on or turn off the user's disconnect keys when connected to this destination.rw Enumeration .1.3.6.1.4.1.539.9.5.1.4 |
aiCLCDestDispMenuThis is used to turn on or turn off the display of the destination name on the destination menu.rw Enumeration .1.3.6.1.4.1.539.9.5.1.5 |
aiCLCDestBaudThis is used to turn on or turn off whether the baud rate is checked before connecting to the destination.rw Enumeration .1.3.6.1.4.1.539.9.5.1.6 |
aiCLCDestIsSwitchThis is used to indicate that the destination is another AI switch.rw Enumeration .1.3.6.1.4.1.539.9.5.1.7 |
aiCLCDestTmrTypeThis is used to set the type of timer associated with the destination.rw Enumeration .1.3.6.1.4.1.539.9.5.1.8 |
aiCLCDestTmrValThis value is the timer duration in milliseconds ranging from 1mS to 4368000mS or about 72 hours.rw Integer32 .1.3.6.1.4.1.539.9.5.1.9 |
aiCLCDestTmrDelayThis value is the delay in milliseconds before allowing further calls on the destination after a call terminates. The range is 1mS to 4368000mS or about 72 hours.rw Integer32 .1.3.6.1.4.1.539.9.5.1.10 |
aiCLCDestPswdThis is password associated with the destination.rw DisplayString .1.3.6.1.4.1.539.9.5.1.11 |
aiCLCDestQPswdThis is password used to control access to the queue management functions associated with the destination.rw DisplayString .1.3.6.1.4.1.539.9.5.1.12 |
aiCLCDestMenuMsgThis string is displayed next to the destination in the destination menu.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.5.1.13 |
aiCLCDestConnMsgThis string is forced out the destination port when a connection begins.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.5.1.14 |
aiCLCDestDiscMsgThis string is forced out the destination port when a connection terminates.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.5.1.15 |
aiCLCDestStateThis is used to enable or disable the destination.rw Enumeration .1.3.6.1.4.1.539.9.5.1.16 |
aiCLCDestNumPortsThis is used to determine the number of ports assigned to this destination.ro INTEGER .1.3.6.1.4.1.539.9.5.1.17 |
aiCLCDestNumUsedThis is used to determine the number of ports in use for this destination.ro INTEGER .1.3.6.1.4.1.539.9.5.1.18 |
aiCLCDestNumFreeThis is used to determine the number of ports that are free for this destination.ro INTEGER .1.3.6.1.4.1.539.9.5.1.19 |
aiCLCDestQHighThis is used to determine the maximum number of ports that were queued to this destination.ro INTEGER .1.3.6.1.4.1.539.9.5.1.20 |
aiCLCDestPortListThis string contains a list of port numbers assigned to this destination.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.5.1.21 |
aiCLCDestWaitForPortThis is used to allow the user to wait for a port when all ports for the destination are busy.rw Enumeration .1.3.6.1.4.1.539.9.5.1.22 |
aiCLCAsyncTableThe Async Table. SEQUENCE OF AiCLCAsyncTableEntry .1.3.6.1.4.1.539.9.6 |
aiCLCAsyncTableEntryAn Async Table entry. AiCLCAsyncTableEntry .1.3.6.1.4.1.539.9.6.1 |
aiCLCAsyncifIndexThe ifIndex from the interfaces table.ro Integer32 .1.3.6.1.4.1.539.9.6.1.1 |
aiCLCAsyncPortThe AISwitch port number.ro INTEGER .1.3.6.1.4.1.539.9.6.1.2 |
aiCLCAsyncAdminStatusThe key field for the Async table entry.rw Enumeration .1.3.6.1.4.1.539.9.6.1.3 |
aiCLCAsyncDiscTypeThe disconnect type for the async port.rw Enumeration .1.3.6.1.4.1.539.9.6.1.4 |
aiCLCEIASignalsThe EIA signals may be disabled (eiaDisabled(1)) or configured for pass through (dsrRtsPass(2)). Additionally the port can be configured to disconnect on loss of DSR (dsrOffDisc(3)), disconnect on change of state of DSR (dsrOnOffDisc(4)), disconnect on loss of DCD (dcdOffDisc(5)), or disconnect on change of state of DCD (dcdOnOffDisc(6)).rw Enumeration .1.3.6.1.4.1.539.9.6.1.5 |
aiCLCEIARtsDiscUpon disconnect RTS may be configured to be on(1), or off(2).rw Enumeration .1.3.6.1.4.1.539.9.6.1.6 |
aiCLCEIADtrDiscUpon disconnect DTR may be configured to be on(1), or off(2).rw Enumeration .1.3.6.1.4.1.539.9.6.1.7 |
aiCLCEIARtsConnUpon connect RTS may be configured to be on(1), or off(2).rw Enumeration .1.3.6.1.4.1.539.9.6.1.8 |
aiCLCEIADtrConnUpon connect DTR may be configured to be on(1), or off(2).rw Enumeration .1.3.6.1.4.1.539.9.6.1.9 |
aiCLCEIARtsToggleUpon disconnect RTS may be configured to toggle (on(1)) or not (off(2)).rw Enumeration .1.3.6.1.4.1.539.9.6.1.10 |
aiCLCEIADtrToggleUpon disconnect DTR may be configured to toggle (on(1)) or not (off(2)).rw Enumeration .1.3.6.1.4.1.539.9.6.1.11 |
aiCLCAutoIDTableA table of board identification information for an AISwitch. SEQUENCE OF AiCLCAutoIDTableEntry .1.3.6.1.4.1.539.9.7 |
aiCLCAutoIDTableEntryBoard Identification information for a particular card. AiCLCAutoIDTableEntry .1.3.6.1.4.1.539.9.7.1 |
aiCLCAIDIndexThe Auto ID Table index.ro INTEGER .1.3.6.1.4.1.539.9.7.1.1 |
aiCLCAIDPortThe port number where the card resides. If the port number is not valid then 256 will be reported.ro INTEGER .1.3.6.1.4.1.539.9.7.1.2 |
aiCLCAIDProductThe product name for the card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.7.1.3 |
aiCLCAIDSerialNumberThe serial number for the card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.7.1.4 |
aiCLCAIDManufDateThe date of manufacture for the card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.7.1.5 |
aiCLCAIDMACAdrsThe MAC address for the card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.539.9.7.1.6 |
aiCLCAI2524LinkTableA table of link status for AI2524 Router Cards. SEQUENCE OF AiCLCAI2524LinkTableEntry .1.3.6.1.4.1.539.9.8 |
aiCLCAI2524LinkTableEntryLink information particular to AI2524 Router Cards. AiCLCAI2524LinkTableEntry .1.3.6.1.4.1.539.9.8.1 |
aiCLCAI2524PortThe port number for the AI2524 Router Card.ro INTEGER .1.3.6.1.4.1.539.9.8.1.1 |
aiCLCAI2524LinkStatusThe 10BT link status for the AI2524 Router Card.ro Enumeration .1.3.6.1.4.1.539.9.8.1.2 |