AIBADGER-MIB
AI MIB Summary
The AIBADGER-MIB module provides SNMP management interfaces for AI's AIBadger hardware or software platform, exposing specific operational metrics such as system status, resource utilization, and device health counters. This module enables network administrators to monitor the performance and availability of AIBadger instances within an infrastructure environment.
A MIB module for AI's AIBadger
Main OID:
ai_Badger.1.3.6.1.4.1.1438
113
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
113 total| Object Name |
|---|
ai_BadgerA MIB module for AI's AIBadger MODULE-IDENTITY .1.3.6.1.4.1.1438 |
netManager OBJECT IDENTIFIER .1.3.6.1.4.1.1438.1 |
aibadger OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2 |
aibadgerInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.1 |
aibadgerSAMVerThe aibadgerSAMVer is its hardware and software version for the aibadger and the SAM board.ro DisplayString .1.3.6.1.4.1.1438.2.1.1 |
aibadgerMACAddrThe aibadgerMACAddr is the MAC Address of the SAM board.ro DisplayString .1.3.6.1.4.1.1438.2.1.2 |
aibadgerStatusThe aibadgerStatus is the status of the aibadger. The possible values are: working, failed, disabled.ro DisplayString .1.3.6.1.4.1.1438.2.1.3 |
aibadgerTimeTagThe aibadgerTimeTag is the time stamp when the aibadger status changed.ro DisplayString .1.3.6.1.4.1.1438.2.1.4 |
aibadgerRspThe aibadgerRsp is the descriptive string for the aibadger status.ro DisplayString .1.3.6.1.4.1.1438.2.1.5 |
aibadgerTrapAckThe aibadgerTrapAck contains trap ID related information if the trap needs to be acknowledged by the manager.rw DisplayString .1.3.6.1.4.1.1438.2.1.6 |
aibadgerTestThe aibadgerTest is for testing the SNMP get and set command for SNMP. Whenever this string is changed it will send a trap to the SNMP managerrw DisplayString .1.3.6.1.4.1.1438.2.1.7 |
deviceTblThe (conceptual) table listing the network element devices connected to the SAM board SEQUENCE OF DeviceTblEntry .1.3.6.1.4.1.1438.2.2 |
deviceTblEntryAn entry (conceptual row) in the deviceTbl. DeviceTblEntry .1.3.6.1.4.1.1438.2.2.1 |
devTblIndexThe auxiliary variable used for identifying instances of the columnar objects in the deviceTbl. INTEGER .1.3.6.1.4.1.1438.2.2.1.1 |
devNameThe devName is the name of the BAM or other device in the device table.ro DisplayString .1.3.6.1.4.1.1438.2.2.1.2 |
devMacAddrThe devMacAddr is the Mac Address or hardware board related address for the device in the device table.ro DisplayString .1.3.6.1.4.1.1438.2.2.1.3 |
devVersionThe devVersion is the hardware and software version for the device in the device table.ro DisplayString .1.3.6.1.4.1.1438.2.2.1.4 |
devBiCntThe devBiCnt is the number of bistate points for the device in the device table.ro INTEGER .1.3.6.1.4.1.1438.2.2.1.5 |
devAnaCntThe devAnaCnt is the number of analog points for the device in the device table.ro INTEGER .1.3.6.1.4.1.1438.2.2.1.6 |
devCtrlCntThe devCtrlCnt is the number of control points for the device in the device table.ro INTEGER .1.3.6.1.4.1.1438.2.2.1.7 |
devStatusThe devStatus is current Status for the device in the device table. The possiable values are: working,failed, disabled.ro DisplayString .1.3.6.1.4.1.1438.2.2.1.8 |
devStatusTimeTagThe devStatusTimeTag is time stamp of the current status for the device in the device table.ro DisplayString .1.3.6.1.4.1.1438.2.2.1.9 |
devRspStrThe devRspStr is more descriptive string for the current status about this device.ro DisplayString .1.3.6.1.4.1.1438.2.2.1.10 |
devTrapAckThe devTrapAck contains trap ID related information if the trap needs to be acknowledged by the manager.rw DisplayString .1.3.6.1.4.1.1438.2.2.1.11 |
bistateTblThe (conceptual) table listing all of the bistate points for all of the devices on the aibadger SEQUENCE OF BistateTblEntry .1.3.6.1.4.1.1438.2.3 |
bistateTblEntryAn entry (conceptual row) in the deviceTbl. BistateTblEntry .1.3.6.1.4.1.1438.2.3.1 |
biTblIndexThe auxiliary variable used for identifying instances of the columnar objects in the bistateTbl. INTEGER .1.3.6.1.4.1.1438.2.3.1.1 |
biAlmIDThe biAlmID is the unique alarm identifier for the aibadger.ro DisplayString .1.3.6.1.4.1.1438.2.3.1.2 |
biDeviceNameThe biDeviceName is the name of the device for this bistate point.ro DisplayString .1.3.6.1.4.1.1438.2.3.1.3 |
biNumberThe biNumber is the physical number for the bistatepoint.ro INTEGER .1.3.6.1.4.1.1438.2.3.1.4 |
biNameThe biName is the user assigned name for this bistate point.ro DisplayString .1.3.6.1.4.1.1438.2.3.1.5 |
biStatusThe biStatus is the current status for this bistate point. The possiable values are: critical, major, minor-b, minor-a, normal, informational, not-defined, maintenance.ro DisplayString .1.3.6.1.4.1.1438.2.3.1.6 |
biRspStrThe biRspStr is the descriptive string for this current status for this bistate point.ro DisplayString .1.3.6.1.4.1.1438.2.3.1.7 |
biStatusTimeTagThe biStatusTimeTag is the time stamp for the current status when the status changed for this bistate point.ro DisplayString .1.3.6.1.4.1.1438.2.3.1.8 |
biTrapAckThe biTrapAck contains trap IP related information if the trap needs to be acknowledged by the manager.rw DisplayString .1.3.6.1.4.1.1438.2.3.1.9 |
biField1The biField1 holds additional information for each points.ro DisplayString .1.3.6.1.4.1.1438.2.3.1.10 |
biField2The biField1 holds additional information for each points.ro DisplayString .1.3.6.1.4.1.1438.2.3.1.11 |
analogTblThe (conceptual) table listing all of the analog alarms for all the devices on the aibadger. SEQUENCE OF AnalogTblEntry .1.3.6.1.4.1.1438.2.4 |
analogTblEntryAn entry (conceptual row) in the analog table. AnalogTblEntry .1.3.6.1.4.1.1438.2.4.1 |
anaTblIndexThe auxiliary variable used for identifying instances of the columnar objects in the analogTbl. INTEGER .1.3.6.1.4.1.1438.2.4.1.1 |
anaAlmIDThe anaAlmID is the unique alarm identifier for the aibadger.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.2 |
anaDeviceNameThe anaDeviceName is the name of the device for this analog point.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.3 |
anaNumberThe anaNumber is the physical number for the analog point.ro INTEGER .1.3.6.1.4.1.1438.2.4.1.4 |
anaNameThe anaName is the user assigned name for this analog point.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.5 |
anaStatusThe anaStatus is the current status for this analog point. The possiable values are: critical, major, minor-b, minor-a, normal, informational, not-defined, maintenance.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.6 |
anaRspStrThe anaRspStr is the descriptive string for this current status for this analog point.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.7 |
anaStatusTimeTagThe anaStatusTimeTag is the time stamp for the current status when the status changed for this analog point.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.8 |
anaValueThe anaValue is the current value for this analog point.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.9 |
anaThresholdThe anaThreshold is the threshold for this analog point indicating the off-normal and normal value range.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.10 |
anaTrapAckThe anaTrapAck contains trap ID related information if the trap needs to be acknowledged by the manager .rw DisplayString .1.3.6.1.4.1.1438.2.4.1.11 |
anaField1The anaField1 holds additional information for each points.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.12 |
anaField2The anaField1 holds additional information for each points.ro DisplayString .1.3.6.1.4.1.1438.2.4.1.13 |
controlTblThe (conceptual) table listing all of the control points for all the devices on the aibadger SEQUENCE OF ControlTblEntry .1.3.6.1.4.1.1438.2.5 |
controlTblEntryAn entry (conceptual row) in the control points table. ControlTblEntry .1.3.6.1.4.1.1438.2.5.1 |
ctrlTblIndexThe auxiliary variable used for identifying instances of the columnar objects in the ctrlstateTbl. INTEGER .1.3.6.1.4.1.1438.2.5.1.1 |
ctrlAlmIDThe ctrlAlmID is the unique alarm identifier for the aibadger.ro DisplayString .1.3.6.1.4.1.1438.2.5.1.2 |
ctrlDeviceNameThe ctrlDeviceName is the name of the device for this control point.ro DisplayString .1.3.6.1.4.1.1438.2.5.1.3 |
ctrlNumberThe ctrlNumber is the physical number for the control point.ro INTEGER .1.3.6.1.4.1.1438.2.5.1.4 |
ctrlNameThe ctrlName is the user assigned name for this control point.ro DisplayString .1.3.6.1.4.1.1438.2.5.1.5 |
ctrlStatusThe ctrlStatus is the current status for this control point. The possiable values are: critical, major, minor-b, minor-a, normal, informational, not-defined, maintenance.ro DisplayString .1.3.6.1.4.1.1438.2.5.1.6 |
ctrlRspStrThe ctrlRspStr is the descriptive string of the current status for this bistate point.ro DisplayString .1.3.6.1.4.1.1438.2.5.1.7 |
ctrlStatusTimeTagThe ctrlStatusTimeTag is the time stamp for the current status when the status changed for this bistate point.ro DisplayString .1.3.6.1.4.1.1438.2.5.1.8 |
ctrlStateThe ctrlState represents the current state of the control point.1--latch off,2--latch on,3--momentary off,4--momentary on.rw INTEGER .1.3.6.1.4.1.1438.2.5.1.9 |
ctrlTrapAckThe ctrlTrapAck contains trap ID related information if the trap needs to be acknowledged by the manager.rw DisplayString .1.3.6.1.4.1.1438.2.5.1.10 |
ctrlField1The ctrlField1 holds additional information for the point.ro DisplayString .1.3.6.1.4.1.1438.2.5.1.11 |
ctrlField2The ctrlField1 holds additional information for the point.ro DisplayString .1.3.6.1.4.1.1438.2.5.1.12 |
snmpManagerTblThe (conceptual) table listing all of SNMP manager's names,IP addresses and community names configured on the aibadger SEQUENCE OF SnmpManagerTblEntry .1.3.6.1.4.1.1438.2.6 |
snmpManagerTblEntryAn entry (conceptual row) in the snmp manager table. SnmpManagerTblEntry .1.3.6.1.4.1.1438.2.6.1 |
snmpTblIndexThe auxiliary variable used for identifying instances of the columnar objects in the snmpManagerTbl. INTEGER .1.3.6.1.4.1.1438.2.6.1.1 |
nameThe name is the name string for the SNMP manager.ro DisplayString .1.3.6.1.4.1.1438.2.6.1.2 |
ipAddrThe ipAddr is the IP address for the SNMP manager.ro DisplayString .1.3.6.1.4.1.1438.2.6.1.3 |
communityThe commnity is the community name string for the SNMP manager.ro DisplayString .1.3.6.1.4.1.1438.2.6.1.4 |
snmpSettings OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.7 |
trapVerThe trapVer is the SNMP trap version the aibadger is configured to send. The possiable values are v1, v2.ro DisplayString .1.3.6.1.4.1.1438.2.7.1 |
trapControlThe trapControl indicates the aibadger is configured to enable or disable all traps. The possiable values are enable or disable.ro DisplayString .1.3.6.1.4.1.1438.2.7.2 |
trapSerControlThe trapSerControl is the severity threshold that triggers a trap if trap control is enabled on the aibadger. The possiable severity values are: critical,major,minor-a,minor-bro DisplayString .1.3.6.1.4.1.1438.2.7.3 |
ackControlThe ackControl indicates if the aibadger is configured to expect an acknowlegement from an SNMP manager when it sends a trap. The SNMP manager must support this feature if you enable ackControl on the aibadger. The possiable values for ackControl are enable or disable.ro DisplayString .1.3.6.1.4.1.1438.2.7.4 |
ackSerControlThe ackSerControl is the trap severity threshold that enables an acknowlegement from a SNMP manager if the ackControl is enabled on the aibadger. The SNMP manager must support this feature. The possiable severity values are: critical, major,minor-a,minor-bro DisplayString .1.3.6.1.4.1.1438.2.7.5 |
aibadgerTraps OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.8 |
healthTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.8.1 |
healthCheckThe SNMP trap is generated every 24 hours to indicate that the SAM board is still there. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.1.1 |
bistateTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.8.2 |
maintenaceBistateTrapThe SNMP trap is generated when a bistate point has change of state and it is currently in maintenance state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.2.1 |
notDefinedBistateTrapThe SNMP trap is generated when a bistate point has change of state and it is currently in not-defined state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.2.2 |
infoBistateTrapThe SNMP trap is generated when a bistate point has change of state and it is currently in informational state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.2.3 |
normalBistateTrapThe SNMP trap is generated when a bistate point has change of state and it is currently in normal state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.2.4 |
minor_aBistateTrapThe SNMP trap is generated when a bistate point has change of state and it is currently in minor-a state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.2.5 |
minor_bBistateTrapThe SNMP trap is generated when a bistate point has change of state and it is currently in minor-b state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.2.6 |
majorBistateTrapThe SNMP trap is generated when a bistate point has change of state and it is currently in major state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.2.7 |
criticalBistateTrapThe SNMP trap is generated when a bistate point has change of state and it is currently in critical state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.2.8 |
analogTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.8.3 |
maintenanceAnalogTrapThe SNMP trap is generated when an analog point value crosses its threshold and it is currently in maintenance mode. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.3.1 |
notDefinedAnalogTrapThe SNMP trap is generated when an analog point value crosses its threshold and it is currently in not-defined state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.3.2 |
infoAnalogTrapThe SNMP trap is generated when an analog point value crosses its threshold and it is currently in informational state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.3.3 |
normalAnalogTrapThe SNMP trap is generated when an analog point value crosses its threshold and it is currently in normal state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.3.4 |
minor_aAnalogTrapThe SNMP trap is generated when an analog point value crosses its threshold and it is currently in minor-a state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.3.5 |
minor_bAnalogTrapThe SNMP trap is generated when an analog point value crosses its threshold and it is currently in minor-b state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.3.6 |
majorAnalogTrapThe SNMP trap is generated when an analog point value crosses its threshold and it is currently in major state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.3.7 |
criticalAnalogTrapThe SNMP trap is generated when an analog point value crosses its threshold and it is currently in critical state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.3.8 |
controlTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.8.4 |
maintenanceControlTrapThe SNMP trap is generated when a control point has a change of state and it is in maintenance state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.4.1 |
notDefinedControlTrapThe SNMP trap is generated when a control point has a change of state and it is currently in not-defined state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.4.2 |
infoControlTrapThe SNMP trap is generated when a control point has a change of state and it is currently in informational state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.4.3 |
normalControlTrapThe SNMP trap is generated when a control point has a change of state and it is currently in normal state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.4.4 |
minor_aControlTrapThe SNMP trap is generated when a control point has a change of state and it is currently in minor-a state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.4.5 |
minor_bControlTrapThe SNMP trap is generated when a control point has a change of state and it is currently in minor-b state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.4.6 |
majorControlTrapThe SNMP trap is generated when a control point has a change of state and it is currently in major state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.4.7 |
criticalControlTrapThe SNMP trap is generated when a control point has a change of state and it is currently in critical state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.4.8 |
testTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.8.5 |
testTrapsThe SNMP trap is generated when the aibadgerTest String changes. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.5.1 |
devTrap OBJECT IDENTIFIER .1.3.6.1.4.1.1438.2.8.6 |
normalDeviceResumeTrapThe SNMP trap is generated when the device status changes from fail state to resume state. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.6.1 |
criticalDeviceFailTrapThe SNMP trap is generated when the communication with the device fails. NOTIFICATION-TYPE .1.3.6.1.4.1.1438.2.8.6.2 |