AISLC1-MIB
AI MIB Summary
The AISLC1-MIB provides SNMP management capabilities for Series One Smart Line Cards (SLC), exposing operational status, interface statistics, and hardware health metrics specific to these line card modules. It enables monitoring of port states, error counters, and resource utilization to facilitate fault detection and performance analysis within the Series One chassis architecture.
The MIB Module for Series One Smart Line Cards (SLC).
Main OID:
aiSLC1.1.3.6.1.4.1.539.11
53
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
aii OBJECT IDENTIFIER .1.3.6.1.4.1.539 |
aiSystemOID OBJECT IDENTIFIER .1.3.6.1.4.1.539.2 |
ai192 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192 |
ai192Ver7 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7 |
ai192Ver70 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.0 |
ai192Ver708 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.0.8 |
ai192Ver709 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.0.9 |
ai192Ver71 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.1 |
ai192Ver710 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.1.0 |
ai192Ver711 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.1.1 |
ai192Ver72 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.2 |
ai192Ver720 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.2.0 |
ai192Ver77 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.192.7.7 |
ai196 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196 |
ai196Ver7 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7 |
ai196Ver70 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.0 |
ai196Ver708 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.0.8 |
ai196Ver709 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.0.9 |
ai196Ver71 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.1 |
ai196Ver710 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.1.0 |
ai196Ver711 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.1.1 |
ai196Ver72 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.2 |
ai196Ver720 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.2.0 |
ai196Ver77 OBJECT IDENTIFIER .1.3.6.1.4.1.539.2.196.7.7 |
aiSLC1The MIB Module for Series One Smart Line Cards
(SLC). MODULE-IDENTITY .1.3.6.1.4.1.539.11 |
aiSLC1System OBJECT IDENTIFIER .1.3.6.1.4.1.539.11.1 |
aislc1AdminLogsEnabledDetermines whether the SLC sends log messages to the console
port of the AISwitch.rw Enumeration .1.3.6.1.4.1.539.11.1.1 |
aislc1AdminTrapsEnabledDetermines whether the SLC sends SNMP Trap PDUs. If the
active CLC in the AISwitch chassis with the SLC is not
SNMP capable, this object cannot be set to the value on(1).rw Enumeration .1.3.6.1.4.1.539.11.1.2 |
aislc1AdminTrapTimerAfter a trap is generated, a timer is started. If the
event that generated the trap occurs while the timer is
running, no trap will be generated for the event. The
value of this object is the duration of the timer in
seconds.rw INTEGER(0..'ffff'h) .1.3.6.1.4.1.539.11.1.3 |
aislc1OperLastMsgTextContains the message text of the last log message that
was sent by the SLC (or would have been sent, if log
message transmission is disabled.ro DisplayString .1.3.6.1.4.1.539.11.1.4 |
aislc1OperLastMsgNumContains the message number of the last log message that
was sent by the SLC (or would have been sent, if log
message transmission is disabled.ro INTEGER(0..'ffff'h) .1.3.6.1.4.1.539.11.1.5 |
aislc1OperCrashCodeContains a crash cause code. This object is for use as
a varbind in TRAP PDUs only.ro Enumeration .1.3.6.1.4.1.539.11.1.6 |
aislc1OperNumEventsSinceLastTrapThe number of times this trap was discarded because the
aislcAdminTrapTimer had not yet expired since the last
time the event which generated the trap occured. This
object is for use as a varbind in TRAP PDUs only.ro INTEGER(0..'ffff'h) .1.3.6.1.4.1.539.11.1.7 |
aislc1StatAIBfrsInUseThe number of AI buffers currently in use.ro INTEGER(0..'ffff'h) .1.3.6.1.4.1.539.11.1.8 |
aislc1StatAIBfrsTotalThe total number of AI buffers.ro INTEGER(0..'ffff'h) .1.3.6.1.4.1.539.11.1.9 |
aislc1StatActiveVCsThe number of Virtual Connections currently in some
state other than Idle.ro INTEGER(0.. 'ffff'h) .1.3.6.1.4.1.539.11.1.10 |
aislc1StatTotalVCsThe total number of Virtual Connection structures
allocated on the SLC.ro INTEGER(0..'ffff'h) .1.3.6.1.4.1.539.11.1.11 |
aislc1StatMinLoopsPerSecondThe minimum number of iterations per second of the SLC's
main polling loop during the sample period.ro Gauge32 .1.3.6.1.4.1.539.11.1.12 |
aislc1StatAvgLoopsPerSecondThe average number of iterations per second of the SLC's
main polling loop during the sample period.ro Gauge32 .1.3.6.1.4.1.539.11.1.13 |
aislc1StatCurLoopsPerSecondThe number of iterations of the SLC's main polling loop
during the past second.ro Gauge32 .1.3.6.1.4.1.539.11.1.14 |
aislc1StatFErrFifoInIsrNumber of RxFIFO half-full ISR interrupts which occurred.
This is not always an error, but may be indicative of a
heavy load on the X.25 software.ro Counter32 .1.3.6.1.4.1.539.11.1.15 |
aislc1StatErrFifoInFullNumber of times the input FIFO was detected as full.
This means that data has probably been lost, due to the
inability of the X.25 software to keep pace with the
RxFIFO.ro Counter32 .1.3.6.1.4.1.539.11.1.16 |
aislc1StatErrFifoInPortNumber of times a bad port number has been received through
the FIFO. This is probably indicative of a hardware failure,
or perhaps a software problem in the CLC code.ro Counter32 .1.3.6.1.4.1.539.11.1.17 |
aislc1StatErrFifoInLostNumber of characters received from the FIFO which were
discarded because of lack of space.ro Counter32 .1.3.6.1.4.1.539.11.1.18 |
aislc1StatErrFifoOutFullNumber of times the output FIFO was detected as full.
This may be an indication of a hardware fault, or a
breakdown in communications between the X.25 software and
CLC regarding the status of a connection(i.e., if the CLC
breaks a connection while the X.25 software is still using
it, a TxFIFO full will definitely result).ro Counter32 .1.3.6.1.4.1.539.11.1.19 |
aislc1StatErrWinInCodeNumber of bad transaction codes received from the CLC
via the window(i.e., the transaction code is out of
range of the expected values).ro Counter32 .1.3.6.1.4.1.539.11.1.20 |
aislc1StatErrWinInPortNumber of bad port numbers received from the CLC via
the window(i.e., the relative port number is out of range
of the expected values).ro Counter32 .1.3.6.1.4.1.539.11.1.21 |
aislc1StatErrWinInConnNumber of bad connection transactions from the CLC via
the window.ro Counter32 .1.3.6.1.4.1.539.11.1.22 |
aislc1StatErrWinInDiscNumber of bad disconnection transactions from the CLC
via the window. Note that this counter will probably be
incremented if calls are disconnected following a link
outage, it is not necessarily indicative of a serious
problem.ro Counter32 .1.3.6.1.4.1.539.11.1.23 |
aislc1StatErrWinInAckNumber of unexpected connection ACK's from the CLC via
the window.ro Counter32 .1.3.6.1.4.1.539.11.1.24 |
aislc1StatErrWinInNakNumber of unexpected connection NAK's from the CLC via
the window.ro Counter32 .1.3.6.1.4.1.539.11.1.25 |
aislc1StatErrWinOutLostNumber of output window transactions which were lost
due to buffer failures.ro Counter32 .1.3.6.1.4.1.539.11.1.26 |
aislc1StatAIBfrsMaxThe maximum number of AI buffers that have been used.ro INTEGER(0..'ffff'h) .1.3.6.1.4.1.539.11.1.27 |