AIISUBNET-MIB
The AIISUBNET-MIB module enables SNMP-based configuration and status monitoring of IP parameters for the AII XIRB device that fall outside standard MIB definitions. It specifically exposes non-standard IP interface attributes and operational states required for the management of AII XIRB hardware.
Imported Objects
Objects
19 total| Object Name |
|---|
aii OBJECT IDENTIFIER .1.3.6.1.4.1.539 |
aiSLC2 OBJECT IDENTIFIER .1.3.6.1.4.1.539.16 |
aiiSubnetThis MIB provides configuration and status information for IP parameters not otherwise configurable by SNMP for the AII XIRB. MODULE-IDENTITY .1.3.6.1.4.1.539.16.3 |
aiiSubnetTableThis table contains objects which specify the parameters for an IP subnet SEQUENCE OF AiiSubnetEntry .1.3.6.1.4.1.539.16.3.1 |
aiiSubnetEntryConfigured parameters for a specific subnet AiiSubnetEntry .1.3.6.1.4.1.539.16.3.1.1 |
aiiSubnetIndexThe index of this entryro SubnetIndex .1.3.6.1.4.1.539.16.3.1.1.1 |
aiiSubnetEntryStatusThe status of this subnet entry, as defined in RFC1443rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.539.16.3.1.1.2 |
aiiSubnetAddrThe IP address to which this entry's addressing information pertains.rw IpAddress .1.3.6.1.4.1.539.16.3.1.1.3 |
aiiSubnetIfIndexThe index value which identifies the physical interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex .rw Integer32 .1.3.6.1.4.1.539.16.3.1.1.4 |
aiiSubnetNetMaskThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.539.16.3.1.1.5 |
aiiSubnetBcastAddrThe value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this entry. For example, when the Internet standard all-ones broadcast address is used, the value will be 1. This value applies to both the subnet and network broadcasts addresses used by the entity on this (logical) interface.rw Integer32 .1.3.6.1.4.1.539.16.3.1.1.6 |
aiiSubnetTypeThe type of the interface over which this subnet is configured. Takes same values as IfType.rw Integer32 .1.3.6.1.4.1.539.16.3.1.1.7 |
aiiSubnetAdmnStatusThe operational state to be taken by this interface at the next system restartrw Integer32 .1.3.6.1.4.1.539.16.3.1.1.8 |
aiiSubnetTable2This table contains objects which specify the parameters for multiple IP subnets SEQUENCE OF AiiSubnetEntry2 .1.3.6.1.4.1.539.16.3.2 |
aiiSubnetEntry2Configured parameters for a specific subnet AiiSubnetEntry2 .1.3.6.1.4.1.539.16.3.2.1 |
aiiSubnetIndex2The index of this entryro INTEGER .1.3.6.1.4.1.539.16.3.2.1.1 |
aiiIPAddrThe IP address to which this entry's addressing information pertains.rw IpAddress .1.3.6.1.4.1.539.16.3.2.1.2 |
aiiSubnetRangeIP Address Range.rw INTEGER .1.3.6.1.4.1.539.16.3.2.1.3 |
aiiSubnetMaskThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.rw IpAddress .1.3.6.1.4.1.539.16.3.2.1.4 |
More MIBs from Applied Innovation
Browse all Applied InnovationMIBs →Standard SNMP MIB module defining data structures for AISPY-MIB.
The AI198CLC-MIB facilitates SNMP-based monitoring and management of Series 1 Common Logic Controllers (CLCs), enabling the retrieval of operational status, alarm states, and performance counters for these industrial automation devices.
Standard SNMP MIB module defining data structures for AIX1-MIB.
The AIMIB module facilitates SNMP-based monitoring and management of Common Logic Controller (CLC) hardware, providing access to operational status, configuration parameters, and performance counters specific to the controller's logic execution and I/O subsystems.
STREAMS-MIB monitors the configuration and operational status of STREAMS subsystems, specifically tracking pipe instances, module bindings, and data flow states within Unix-based operating systems. This module enables administrators to verify the integrity of STREAMS drivers and multiplexers by observing interface counters, error conditions, and resource allocation metrics.
The AIBADGER-MIB module provides SNMP management interfaces for AI's AIBadger hardware or software platform, exposing specific operational metrics such as system status, resource utilization, and device health counters. This module enables network administrators to monitor the performance and availability of AIBadger instances within an infrastructure environment.