AIILINKTABLE-MIB
The AIILINKTABLE-MIB module provides programmatic access to the link table data structures of AIILINK devices, enabling the monitoring of interface operational states, link status transitions, and associated traffic statistics for network topology analysis and fault detection.
Imported Objects
Objects
35 total| Object Name |
|---|
aii OBJECT IDENTIFIER .1.3.6.1.4.1.539 |
aiSLC2 OBJECT IDENTIFIER .1.3.6.1.4.1.539.16 |
aiLinkThe MIB module for the link table. MODULE-IDENTITY .1.3.6.1.4.1.539.16.2 |
aiLinkTableEntries define links in the system. Each link consists of a physical
interface associated with one or more network interfaces. That is,
it is the intention of this table to define the protocol stacks
in use on an AII SLC. SEQUENCE OF AILinkEntry .1.3.6.1.4.1.539.16.2.1 |
aiLinkEntryEntries of aiLinkTable. AILinkEntry .1.3.6.1.4.1.539.16.2.1.1 |
aiLinkIndexA value that distinguishes this entry from another entry. Entries in
this table are referenced from other objects which identify links.ro PositiveInteger .1.3.6.1.4.1.539.16.2.1.1.1 |
aiLinkTypeA value that distinguishes, in general, what kind of link this is.
Examples include
propPointToPointSerial(22),
x25ple(40)
and frameRelay(32),rw AIIifType .1.3.6.1.4.1.539.16.2.1.1.2 |
aiLinkDescrA description of the type of link that this is.rw DisplayString .1.3.6.1.4.1.539.16.2.1.1.3 |
aiLinkIfIndexThe index into the interfaces group of MIB-II, which defines what type
of interface this link is. This definition describes a protocol
stack in only the most general way. The interface which appears here may
have other interfaces stacked beneath it which are also in the interface
table.ro IfIndexType .1.3.6.1.4.1.539.16.2.1.1.4 |
aiLinkIfIndex1The index into the interfaces group of MIB-II, which defines what type
of interface is at the bottom of this link (stack).ro IfIndexType .1.3.6.1.4.1.539.16.2.1.1.5 |
aiLinkIfIndex2The index into the interfaces group of MIB-II, which defines what type
of interface sits on top of and talks to the interface defined by
aiLinkIfIndex1ro IfIndexType .1.3.6.1.4.1.539.16.2.1.1.6 |
aiLinkIfIndex3The index into the interfaces group of MIB-II, which defines what type
of interface sits on top of and talks to the interface defined by
aiLinkIfIndex2ro IfIndexType .1.3.6.1.4.1.539.16.2.1.1.7 |
aiLinkIfIndex4The index into the interfaces group of MIB-II, which defines what type
of interface sits on top of and talks to the interface defined by
aiLinkIfIndex3.ro IfIndexType .1.3.6.1.4.1.539.16.2.1.1.8 |
aiLinkPhysIfThe physical interface to be used for this link.rw Enumeration .1.3.6.1.4.1.539.16.2.1.1.9 |
aiLinkX25TableEntries define additional X.25 parameters not covered in the
standard MIB. These parameters are applied on a per link basis
for the links in the system.
This table contains two entries for each of the x25 links of
the card. These correspond to the Administrative and Operating
values of the MIB objects.
The first half of the table, contains the Administrative values
for each link; they will take effect the next time the
corresponding link is initialized. The second group reports the
parameters currently in effect for the links; these are
read-only. SEQUENCE OF AILinkX25Entry .1.3.6.1.4.1.539.16.2.2 |
aiLinkX25EntryEntries of aiLinkX25Table. AILinkX25Entry .1.3.6.1.4.1.539.16.2.2.1 |
aiLinkX25IndexA value that distinguishes this entry from another entry. Entries in
this table are referenced from other objects which identify links.ro PositiveInteger .1.3.6.1.4.1.539.16.2.2.1.1 |
aiLinkX25NegotiationThis entry determines whether or not Facility Negotiation is enabled for
circuits established on this X.25 link. When disabled, the circuits will
still respond to X.25 facility negotiation requests, but they will not
initiate a negotiation session.rw Enumeration .1.3.6.1.4.1.539.16.2.2.1.2 |
aiLinkX25LinkModeThis entry determines whether link behaves as a normal X.25 link or a
BX.25-style passive link, or BX.25-style extended passive link.rw Enumeration .1.3.6.1.4.1.539.16.2.2.1.3 |
aiLinkConformance OBJECT IDENTIFIER .1.3.6.1.4.1.539.16.2.3 |
aiLinkGroups OBJECT IDENTIFIER .1.3.6.1.4.1.539.16.2.3.1 |
aiLinkCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.539.16.2.3.2 |
aiLinkT1TableEntries define additional T1 parameters not covered in the standard MIB.
These parameters are applied on a per link basis for the links in the system. SEQUENCE OF AILinkT1Entry .1.3.6.1.4.1.539.16.2.4 |
aiLinkT1EntryEntries of aiLinkT1Table. AILinkT1Entry .1.3.6.1.4.1.539.16.2.4.1 |
aiLinkT1IndexA value that distinguishes this entry from another entry. Entries in
this table are referenced from other objects which identify links.ro PositiveInteger .1.3.6.1.4.1.539.16.2.4.1.1 |
aiLinkT1LineBuildOutLine build out of this T1 link, measured in feet.
The following values are accepted:
lbo0to133ft(1)
lbo133to266ft(2)
lbo266to399ft(3)
lbo399to533ft(4)
lbo533to655ft(5)rw Enumeration .1.3.6.1.4.1.539.16.2.4.1.2 |
aiLinkT1TimeslotSpeedThis is the time slot speed, which determines the overall bandwidth
of the T1 link. At 56K, the T1 link will have a maximum bandwidth of
1.344kbps. At 64K, the T1 link will have a maximum bandwidth of
1.536kbps. 56K is required if the line code is AMI.rw Enumeration .1.3.6.1.4.1.539.16.2.4.1.3 |
aiLinkT1TimeslotsStringThe timeslots enabled on the T1 for passing data.rw DisplayString .1.3.6.1.4.1.539.16.2.4.1.4 |
aiLinkT1TimeslotsInternal representation of the timeslots.ro PositiveInteger .1.3.6.1.4.1.539.16.2.4.1.5 |
aiLinkE1TableEntries define additional E1 parameters not covered in the standard MIB.
These parameters are applied on a per link basis for the links in the system. SEQUENCE OF AILinkE1Entry .1.3.6.1.4.1.539.16.2.5 |
aiLinkE1EntryEntries of aiLinkE1Table. AILinkE1Entry .1.3.6.1.4.1.539.16.2.5.1 |
aiLinkE1IndexA value that distinguishes this entry from another entry. Entries in
this table are referenced from other objects which identify links.ro PositiveInteger .1.3.6.1.4.1.539.16.2.5.1.1 |
aiLinkE1TimeslotSpeedThis is the time slot speed, which determines the overall bandwidth
of the E1 link. At 56K, the E1 link will have a maximum bandwidth of
1.736kbps. At 64K, the E1 link will have a maximum bandwidth of
1.984kbps. 56K is required if the line code is AMI.rw Enumeration .1.3.6.1.4.1.539.16.2.5.1.2 |
aiLinkE1TimeslotsStringThe timeslots enabled on the E1 for passing data.rw DisplayString .1.3.6.1.4.1.539.16.2.5.1.3 |
aiLinkE1TimeslotsInternal representation of the timeslots.ro PositiveInteger .1.3.6.1.4.1.539.16.2.5.1.4 |
More MIBs from Applied Innovation
Browse all Applied InnovationMIBs →Standard SNMP MIB module defining data structures for AISPY-MIB.
The AI198CLC-MIB facilitates SNMP-based monitoring and management of Series 1 Common Logic Controllers (CLCs), enabling the retrieval of operational status, alarm states, and performance counters for these industrial automation devices.
Standard SNMP MIB module defining data structures for AIX1-MIB.
The AIMIB module facilitates SNMP-based monitoring and management of Common Logic Controller (CLC) hardware, providing access to operational status, configuration parameters, and performance counters specific to the controller's logic execution and I/O subsystems.
STREAMS-MIB monitors the configuration and operational status of STREAMS subsystems, specifically tracking pipe instances, module bindings, and data flow states within Unix-based operating systems. This module enables administrators to verify the integrity of STREAMS drivers and multiplexers by observing interface counters, error conditions, and resource allocation metrics.
The AIBADGER-MIB module provides SNMP management interfaces for AI's AIBadger hardware or software platform, exposing specific operational metrics such as system status, resource utilization, and device health counters. This module enables network administrators to monitor the performance and availability of AIBadger instances within an infrastructure environment.