AI194HUB-MIB

AI MIB Summary

The AI194HUB-MIB module provides SNMP management capabilities for AI194HUB Ethernet hubs, enabling the monitoring of port status, collision counters, and frame error statistics. It facilitates the tracking of physical layer connectivity states and traffic metrics specific to legacy hub-based network segments.

The MIB Module for Ethernet hubs

Main OID:

aiHub.1.3.6.1.4.1.539.3

Objects

Active

Status

Dependencies

Imported Objects

Objects

34 total

Object Name	Syntax	OID
aii OBJECT IDENTIFIER `.1.3.6.1.4.1.539`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539`
aiProxy OBJECT IDENTIFIER `.1.3.6.1.4.1.539.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.1`
aiSystemOID OBJECT IDENTIFIER `.1.3.6.1.4.1.539.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.2`
aiHubThe MIB Module for Ethernet hubs MODULE-IDENTITY `.1.3.6.1.4.1.539.3`	MODULE-IDENTITY	`.1.3.6.1.4.1.539.3`
aiHubTwistedPairPortNumberThe number of twisted-pair hub ports. By convention, these are the lower numbered hub ports.ro INTEGER `.1.3.6.1.4.1.539.3.1`	INTEGER	`.1.3.6.1.4.1.539.3.1`
aiHubNonTwistedPairPortNumberThe number of non-twisted-pair hub ports.ro INTEGER `.1.3.6.1.4.1.539.3.2`	INTEGER	`.1.3.6.1.4.1.539.3.2`
aiHubPortTableA list of hub Ethernet port entries. SEQUENCE OF HubPortEntry `.1.3.6.1.4.1.539.3.3`	SEQUENCE OF HubPortEntry	`.1.3.6.1.4.1.539.3.3`
aiHubPortEntryHub parameter values for an Ethernet port. HubPortEntry `.1.3.6.1.4.1.539.3.3.1`	HubPortEntry	`.1.3.6.1.4.1.539.3.3.1`
aiHubPortIndexAn index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by portBasicID in hmBasicPortTable in the IEEE Hub MIB. Corresponds directly to the numbered, twisted-pair port numbers and indirectly to the unnumbered, non-twisted-pair ports (A, C) in the diagnostic display.ro INTEGER `.1.3.6.1.4.1.539.3.3.1.1`	INTEGER	`.1.3.6.1.4.1.539.3.3.1.1`
aiHubPortNameAn administratively assigned name for a twisted-pair port, typically with some local significance. Corresponds directly to the WINSLC PORTNAME string.rw DisplayString `.1.3.6.1.4.1.539.3.3.1.2`	DisplayString	`.1.3.6.1.4.1.539.3.3.1.2`
aiHubPortAdminStateControl over the port's ability to transmit and receive. ENABLED/DISABLED.rw Enumeration `.1.3.6.1.4.1.539.3.3.1.3`	Enumeration	`.1.3.6.1.4.1.539.3.3.1.3`
aiHubPortAutoPartitionStateThe port's status with regard to automatic partitioning.ro Enumeration `.1.3.6.1.4.1.539.3.3.1.4`	Enumeration	`.1.3.6.1.4.1.539.3.3.1.4`
aiHubPortErrorsThe number of times that a frame was received in erorr.ro Counter `.1.3.6.1.4.1.539.3.3.1.5`	Counter	`.1.3.6.1.4.1.539.3.3.1.5`
aiHubPortCollisionsNumber of times that a frame collision came within the allowed collision window.ro Counter `.1.3.6.1.4.1.539.3.3.1.6`	Counter	`.1.3.6.1.4.1.539.3.3.1.6`
aiHubPortStatusLink status of the portro Enumeration `.1.3.6.1.4.1.539.3.3.1.7`	Enumeration	`.1.3.6.1.4.1.539.3.3.1.7`
aiHubPortLinkErrorsNumber of times that a link error was detected.ro Counter `.1.3.6.1.4.1.539.3.3.1.8`	Counter	`.1.3.6.1.4.1.539.3.3.1.8`
aiHubPortShortPacketsNumber of times that a short packet was detected.ro Counter `.1.3.6.1.4.1.539.3.3.1.9`	Counter	`.1.3.6.1.4.1.539.3.3.1.9`
aiHubPortJabbersNumber of times that a jabber packet ??? was detected.ro Counter `.1.3.6.1.4.1.539.3.3.1.10`	Counter	`.1.3.6.1.4.1.539.3.3.1.10`
aiHubPortPartitionNumber of times that this port was AutoPartitioned.ro Counter `.1.3.6.1.4.1.539.3.3.1.11`	Counter	`.1.3.6.1.4.1.539.3.3.1.11`
aiHubPortZeroControl to zero Counters kept for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's Counters to be zeroed. Corresponds to the ZERO PORT command.rw Enumeration `.1.3.6.1.4.1.539.3.3.1.12`	Enumeration	`.1.3.6.1.4.1.539.3.3.1.12`
aiHubPortZeroTimeThe time the counters for this port was last zeroed.ro TimeTicks (SNMPv2-SMI) `.1.3.6.1.4.1.539.3.3.1.13`	TimeTicks (SNMPv2-SMI)	`.1.3.6.1.4.1.539.3.3.1.13`
aiHubLogMessageAny string 'set' into this variable will force a log message to be printed on the CLC log.rw DisplayString `.1.3.6.1.4.1.539.3.4`	DisplayString	`.1.3.6.1.4.1.539.3.4`
aiHubPortAutoPartitionLimitThe hub AutoPartition limit, 31 or 63 collisions.rw Enumeration `.1.3.6.1.4.1.539.3.5`	Enumeration	`.1.3.6.1.4.1.539.3.5`
aiGroup OBJECT IDENTIFIER `.1.3.6.1.4.1.539.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.4`
aiGroup194 OBJECT IDENTIFIER `.1.3.6.1.4.1.539.4.194`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.4.194`
aiGroup194Ver7 OBJECT IDENTIFIER `.1.3.6.1.4.1.539.4.194.7`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.4.194.7`
aiGroup194Ver71 OBJECT IDENTIFIER `.1.3.6.1.4.1.539.4.194.7.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.4.194.7.1`
aiGroup194Ver72 OBJECT IDENTIFIER `.1.3.6.1.4.1.539.4.194.7.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.4.194.7.2`
aiGroup194Ver73 OBJECT IDENTIFIER `.1.3.6.1.4.1.539.4.194.7.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.4.194.7.3`
aiGroup194Ver74 OBJECT IDENTIFIER `.1.3.6.1.4.1.539.4.194.7.4`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.4.194.7.4`
aiISISGre OBJECT IDENTIFIER `.1.3.6.1.4.1.539.5`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.5`
aiManager OBJECT IDENTIFIER `.1.3.6.1.4.1.539.6`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.6`
aiSoftware OBJECT IDENTIFIER `.1.3.6.1.4.1.539.7`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.7`
aiSystem OBJECT IDENTIFIER `.1.3.6.1.4.1.539.8`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.539.8`