AGENT-MIB
AI MIB Summary
The AGENT-MIB module provides the foundational framework for D-Link network devices to expose standard SNMP objects, including system status, interface statistics, and device health metrics, enabling centralized monitoring and management via the SNMP protocol.
The Structure of Common Management Information for the D-Link enterprise.
Main OID:
agentGeneralMgmt.dlink-common-mgmt.1
56
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
56 total| Object Name |
|---|
agentGeneralMgmtThe Structure of Common Management Information for the
D-Link enterprise. MODULE-IDENTITY .dlink-common-mgmt.1 |
agentBasicInfo OBJECT IDENTIFIER .dlink-common-mgmt.1.1 |
agentMgmtProtocolCapabilityThe network management protocol(s) supported by this agent.ro Enumeration .dlink-common-mgmt.1.1.1 |
agentMibCapabilityTableA list of MIB capability entries supported by this agent. SEQUENCE OF AgentMibCapabilityEntry .dlink-common-mgmt.1.1.2 |
agentMibCapabilityEntryA MIB capability entry contains objects describing a particular MIB
supported by this agent. AgentMibCapabilityEntry .dlink-common-mgmt.1.1.2.1 |
agentMibCapabilityIndexA list of agentMibCapabilityDescr entries.ro Integer32 .dlink-common-mgmt.1.1.2.1.1 |
agentMibCapabilityDescrThe name of the MIB supported by the agent.ro DisplayString .dlink-common-mgmt.1.1.2.1.2 |
agentMibCapabilityVersionThe version of the MIB specified in this entry.ro Integer32 .dlink-common-mgmt.1.1.2.1.3 |
agentMibCapabilityTypeThe type of the MIB specified in this entry.ro Enumeration .dlink-common-mgmt.1.1.2.1.4 |
agentStatusConsoleInUseThis indicates whether console is currently in-use.ro Enumeration .dlink-common-mgmt.1.1.3 |
agentStatusSaveCfgThis indicates the status of the device configuration.
other(1) - this entry is currently in use but the conditions
under which it will remain so are different from each
of the following values.
proceeding(2) - the device configuration is being currently saved into the NV-RAM.
completed(3) V all of the device configuration parameters have been
saved into NV-RAM.
changed-not-save(4) V some of the device configuration parameters have
been changed but not saved into NV-RAM.
failed(5) - The process to save device configuration is failed.ro Enumeration .dlink-common-mgmt.1.1.4 |
agentStatusFileTransferstatus of firmware download control. If the value is 'other',
means never firmware updated since device started up.ro Enumeration .dlink-common-mgmt.1.1.5 |
agentPORTutilizationTableThis table specifies the current utilization of a specified port. SEQUENCE OF AgentPORTutilizationEntry .dlink-common-mgmt.1.1.8 |
agentPORTutilizationEntryA list of information regarding the port utilization function. AgentPORTutilizationEntry .dlink-common-mgmt.1.1.8.1 |
agentPORTutilizationProtIndexThis object indicates the module's port number.ro INTEGER .dlink-common-mgmt.1.1.8.1.1 |
agentPORTutilizationTXThe current rate of transmitted frames on the specified port.ro INTEGER .dlink-common-mgmt.1.1.8.1.2 |
agentPORTutilizationRXThe current rate of received frames on the specified port.ro INTEGER .dlink-common-mgmt.1.1.8.1.3 |
agentPORTutilizationUtilThe current percentages regarding port statistics.ro INTEGER .dlink-common-mgmt.1.1.8.1.4 |
agentBasicConfig OBJECT IDENTIFIER .dlink-common-mgmt.1.2 |
agentBscSwFileTableA list of MIB Basic Config entries supported file Update by this agent. SEQUENCE OF AgentBscSwFileEntry .dlink-common-mgmt.1.2.1 |
agentBscSwFileEntryA basic config entry contains objects describing a particular MIB
supported by this agent. AgentBscSwFileEntry .dlink-common-mgmt.1.2.1.1 |
agentBscSwFileIndexThe table index for the file entryrw Integer32 .dlink-common-mgmt.1.2.1.1.1 |
agentBscSwFileDscrThe description for the purpose of the software file in this entry.
Note:
For system which does not support change of this object, setting value to
this object will cause the system to return bad-value error message.rw DisplayString .dlink-common-mgmt.1.2.1.1.2 |
agentBscSwFileAddrThe IP address where the File to be downloaded is located, or the IP address
where the file will be uploaded to.rw IpAddress .dlink-common-mgmt.1.2.1.1.3 |
agentBscSwFileTransferTypeThe channel through which the file will be downloaded or uploaded.
Note:
For system which does not support all channels, setting value to the unsupported
channel will cause the system to return bad-value error message.rw Enumeration .dlink-common-mgmt.1.2.1.1.4 |
agentBscSwFileThe name of the file to be downloaded from the TFTP server, or to be uploaded
to.rw DisplayString .dlink-common-mgmt.1.2.1.1.5 |
agentBscSwFileLocateIdThis object describes the type of the file.
runtime-code(1),
log-file(2),
cfg-file(3)
Note:
For system which does not support change of this object, setting value to
this object will cause the system to return bad-value error message.rw INTEGER .dlink-common-mgmt.1.2.1.1.6 |
agentBscSwFileLoadTypeThis object provides the user to select download or upload function for the file.
Note:
For system which does not support change of this object, setting value to
this object will cause the system to return bad-value error message.rw Enumeration .dlink-common-mgmt.1.2.1.1.7 |
agentBscSwFileCtrlThis object provides the user to download runtime software. The setting
will take effect when the system is restart. See Note(1) below
Note:
For system which does not support change of this object to some value,
setting object to these values cause the system to return
bad-value error message.rw Enumeration .dlink-common-mgmt.1.2.1.1.8 |
agentFileTransferThis object will execute the download or upload action. If start(2), it will
begin to download/upload, but no reset as follow. If start-and-reset(3), then
the reset will active after download or upload. No action if(4).
Note:
Because these funiction will be limited by the system support. Some of the
select item will invalid. When one of the item user select,it will response with
bad-value status.rwobsolete Enumeration .dlink-common-mgmt.1.2.2 |
agentSystemResetThis object indicates the agent system reset state. Setting this
object to no-reset(4) has no effect. Setting this object to
cold-start(2) or warm-start(3) will reset the agent. The agent
always returns no-reset(4) when this object is read.rw Enumeration .dlink-common-mgmt.1.2.3 |
agentRs232PortConfigThis object indicates the RS-232C mode while device restart.rw Enumeration .dlink-common-mgmt.1.2.4 |
agentOutOfBandBaudRateConfigThis object allows user to specify out_of_band baud rate. It will take effect
when the system is restart.
Note:
Because these funiction will be limited by the system support. Some of the
select item will invalid. When one of the item user select,it will response with
bad-value status.rwobsolete Enumeration .dlink-common-mgmt.1.2.5 |
agentSaveCfgThis indicates the current device saving type will be saved into to NV-RAM.
other(1) - none of the following.
cfg(3) - save configuration.
log(4) - save log.
all(5) - save both ( active configuration & log).rw Enumeration .dlink-common-mgmt.1.2.6 |
agentTrustHostMgmt OBJECT IDENTIFIER .dlink-common-mgmt.1.2.10 |
agentTrustHostTableThis table contains Trust Host information. SEQUENCE OF AgentTrustHostEntry .dlink-common-mgmt.1.2.10.1 |
agentTrustHostEntryA list of information about Trust Host. AgentTrustHostEntry .dlink-common-mgmt.1.2.10.1.1 |
agentTrustHostIndexThe index of Trust Host entry.ro INTEGER .dlink-common-mgmt.1.2.10.1.1.1 |
agentTrustHostIPAddressSpecifies the IP address of the Trust Host.rw IpAddress .dlink-common-mgmt.1.2.10.1.1.2 |
agentTrustHostRowStatusIndicates the status of this entry. When creating a Trust Host
entry, the IP address should be set, too.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.1.2.10.1.1.3 |
agentTrustHostIPSubnetMaskSpecifies the IP subnet mask of the Trust Host.rw IpAddress .dlink-common-mgmt.1.2.10.1.1.4 |
agentTrustHostDelAllStateUsed to delete all Trust Host entries.rw Enumeration .dlink-common-mgmt.1.2.10.2 |
agentFDBMgmt OBJECT IDENTIFIER .dlink-common-mgmt.1.2.11 |
agentFDBClearAllStateUsed to clear all FDB entries.rw Enumeration .dlink-common-mgmt.1.2.11.1 |
agentARPMgmt OBJECT IDENTIFIER .dlink-common-mgmt.1.2.12 |
agentARPClearAllStateUsed to clear all ARP entries.rw Enumeration .dlink-common-mgmt.1.2.12.1 |
agentIpProtoConfig OBJECT IDENTIFIER .dlink-common-mgmt.1.3 |
agentIpNumOfIfThe total number of IP interfaces supported by this agent.ro Integer32 .dlink-common-mgmt.1.3.1 |
agentIpTftpServerAddrThe IP Address of TFTP Server.rwobsolete IpAddress .dlink-common-mgmt.1.3.2 |
agentIpGetIpFromThis object indicates whether the agent get its system IP address
from Bootp/DHCP server at start up.rw Enumeration .dlink-common-mgmt.1.3.3 |
agentConsoleModeManager OBJECT IDENTIFIER .dlink-common-mgmt.1.5 |
agentConsoleModeManagerDataBitsThe DataBits for console mode, If the agentRs232PortConfig change to console mode
then the device will use this group to make a setup for console value and
agentSlipModeManager group will deactive automatically.rw Enumeration .dlink-common-mgmt.1.5.1 |
agentConsoleModeManagerStopBitsThe Stop Bits for console moderw Enumeration .dlink-common-mgmt.1.5.2 |
agentConsoleModeManagerParityThe Parity for console mode, If the agentRs232PortConfig change to console mode
then the device will use this group to make a setup for console value and
agentSlipModeManager group will deactive automatically.rw Enumeration .dlink-common-mgmt.1.5.3 |
agentConsoleModeManagerBaudRateThe transmit rate for console mode.
Note:
Because these funiction will be limited by the system support. Some of the
select item will invalid. When one of the item user select,it will response with
bad-value status.rw Enumeration .dlink-common-mgmt.1.5.4 |
agentConsoleModeManagerLogoutTimeThe time period of auto logout.rw Enumeration .dlink-common-mgmt.1.5.5 |