AE-PM-TABLE-MIB
AI MIB Summary
The AE-PM-TABLE-MIB module enables SNMP-based monitoring of performance statistics for Access Ethernet (AE) Optical Network Terminals (ONTs), specifically tracking operational metrics such as optical power levels, signal quality indicators, and traffic counters to assess link health and service delivery.
This management information module contains AE ONT performance statistics.
Main OID:
aePmModule.1.3.6.1.4.1.6321.1.2.5.5
188
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
188 total| Object Name |
|---|
aePmModuleThis management information module contains AE ONT performance statistics. MODULE-IDENTITY .1.3.6.1.4.1.6321.1.2.5.5 |
IMPORTSThis management information module contains AE ONT performance statistics. Unknown .1.3.6.1.4.1.6321.1.2.5.5 |
aePmTCModule OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.5.5.1 |
aeThresholdCrossingTableThis table contains threshold values for the
performance monitoring parameters maintained by other
entities. Other entities may point to this table.
Multiple other entities may point to a single entry in
this table.
The convention for threshold crossing values is a
value of 0 means the threshold value is not being
checked, i.e., the TCA is disabled. SEQUENCE OF AeThresholdCrossingEntry .1.3.6.1.4.1.6321.1.2.5.5.1.1 |
aeThresholdCrossingEntryEach entry contains one set of threshold crossing
values. AeThresholdCrossingEntry .1.3.6.1.4.1.6321.1.2.5.5.1.1.1 |
aeThresholdCrossingIndexThis object identifies the index info the
threshold crossing table.ro AeThresholdCrossingIndex (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.1 |
aeThresholdCrossingValue1This object identifies the threshold value
for the 1st thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.2 |
aeThresholdCrossingValue2This object identifies the threshold value
for the 2nd thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.3 |
aeThresholdCrossingValue3This object identifies the threshold value
for the 3rd thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.4 |
aeThresholdCrossingValue4This object identifies the threshold value
for the 4th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.5 |
aeThresholdCrossingValue5This object identifies the threshold value
for the 5th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.6 |
aeThresholdCrossingValue6This object identifies the threshold value
for the 6th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.7 |
aeThresholdCrossingValue7This object identifies the threshold value
for the 7th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.8 |
aeThresholdCrossingValue8This object identifies the threshold value
for the 8th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.9 |
aeThresholdCrossingValue9This object identifies the threshold value
for the 9th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.10 |
aeThresholdCrossingValue10This object identifies the threshold value
for the 10th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.11 |
aeThresholdCrossingValue11This object identifies the threshold value
for the 11th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.12 |
aeThresholdCrossingValue12This object identifies the threshold value
for the 12th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.13 |
aeThresholdCrossingValue13This object identifies the threshold value
for the 13th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.14 |
aeThresholdCrossingValue14This object identifies the threshold value
for the 14th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.15 |
aeThresholdCrossingValue15This object identifies the threshold value
for the 15th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.16 |
aeThresholdCrossingValue16This object identifies the threshold value
for the 16th thresholded counter. A value of
zero indicates no threshold value.rw PerfCurrentCount (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.17 |
aeThresholdCrossingRowStatusThis object is used for row creation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.5.5.1.1.1.18 |
aePwe3PmModule OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.5.5.2 |
aePwe3BunCurrent15TableThe bundle table contains statistics for the pseudowire connection (i.e. bundle). SEQUENCE OF AePwe3BunCurrent15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.1 |
aePwe3BunCurrent15Entry AePwe3BunCurrent15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.1.1 |
aePwe3BunCurrent15PortThe T1 port instance associated with this bundle.ro AePwe3T1Instance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.1 |
aePwe3BunCurrent15BundleThe bundle instance (identifier) associated with this pseudowire.ro AePwe3BundleInstance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.2 |
aePwe3BunCurrent15RxPacketTotal number of packets received. Under normal conditions, the received
and transmitted counts will increment at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.3 |
aePwe3BunCurrent15TxPacketTotal number of packets transmitted. Under normal conditions, the received
and transmitted counts will increment at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.4 |
aePwe3BunCurrent15LostPacketTotal number of packets lost. These are packets that were never received as
determined by gaps in the packet sequence numbers.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.5 |
aePwe3BunCurrent15DiscardPacketTotal number of packets received but discarded. Packets may be discarded
if they are received too far out of order to be reordered.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.6 |
aePwe3BunCurrent15ReorderPacketTotal number of packets received and reordered. If packets are received out
of order, an attempt is made to reorder. Reordering packets does
not result in an error on the T1. However, this could be used as an
indication that there is congestion within the network.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.7 |
aePwe3BunCurrent15JumpedPacketTotal number of packets jumped. A jump occurs when there is a gap in the sequence
numbers. As such, lost = jumped - reordered. If packets are not arriving out of
order, then the lost = jumped. This is an indication that packet(s) are dropping
somewhere within the network.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.8 |
aePwe3BunCurrent15MalformedSecThe number of seconds a packet length mismatch has been detected. The packet
size must be the same at each end of the pseudowire. This is an indication
of a configuration problem.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.9 |
aePwe3BunCurrent15TxRbitSecThe number of seconds packets have been transmitted with the R-bit asserted.
The R-bit is asserted in the transmit packets when a bundle stops receiving
packets. This could indicate that the other end of the pseudowire is not
configured.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.10 |
aePwe3BunCurrent15TxLbitSecThe number of seconds packets have been transmitted with the L-bit asserted.
The L-bit is asserted in the transmit packets when there is a local T1 LOS
condition.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.11 |
aePwe3BunCurrent15RxRbitSecThe number of seconds packets have been received with the R-bit asserted.
This is an indication that the other end of the pseudowire is not receiving
packets.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.12 |
aePwe3BunCurrent15RxLbitSecThe number of seconds packets have been received with the L-bit asserted.
This is an indication that there is a far-end T1 LOS condition.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.13 |
aePwe3BunCurrent15JitterBufferUnderrunThe number of jitter buffer underruns that have been detected. The jitter buffer
has emptied (packet reception is too slow). This could be an indication that the
jitter buffer is not configured big enough to accommodate the network packet
delay variation.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.14 |
aePwe3BunCurrent15JitterBufferOverrunThe number of jitter buffer overruns that have been detected. The jitter buffer
is full and there is no room for addition packets. This could be an indication
of a timing problem (T1 timing at each end of the pseudowire is not synchronous).ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.15 |
aePwe3BunCurrent15ESThe number of errored seconds.
An errored second is counted for any of the following conditions:
Lost Packets
Discarded Packets
Jitter Buffer Underrun
Jitter Buffer Overrunro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.16 |
aePwe3BunCurrent15UASThe number of unavailable seconds.
An unavailable second is counted for any of the following conditions:
Packet Size Mismatch
R-bit is being transmitted
L-bit is being transmitted
R-bit is being received
L-bit is being received
Not receiving any packets
Not transmitting any packets
Bundle is not yet connected (e.g. ARP is not resolved)ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.17 |
aePwe3BunCurrent15ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.18 |
aePwe3BunCurrent15ThresholdCrossingPointerIndicates the index of the threshold crossing entry.
Threshold crossings are not implemented.rw AeThresholdCrossingPointer (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.1.1.19 |
aePwe3BunInterval15TableThe bundle table contains statistics for the pseudowire connection (i.e. bundle). SEQUENCE OF AePwe3BunInterval15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.2 |
aePwe3BunInterval15Entry AePwe3BunInterval15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.2.1 |
aePwe3BunInterval15PortThe T1 port instance associated with this bundle.ro AePwe3T1Instance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.1 |
aePwe3BunInterval15BundleThe bundle instance (identifier) associated with this pseudowire.ro AePwe3BundleInstance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.2 |
aePwe3BunInterval15IntervalThere are 32 15-minute bucket intervals.ro INTEGER .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.3 |
aePwe3BunInterval15RxPacketTotal number of packets received. Under normal conditions, the received
and transmitted counts will increment at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.4 |
aePwe3BunInterval15TxPacketTotal number of packets transmitted. Under normal conditions, the received
and transmitted counts will increment at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.5 |
aePwe3BunInterval15LostPacketTotal number of packets lost. These are packets that were never received as
determined by gaps in the packet sequence numbers.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.6 |
aePwe3BunInterval15DiscardPacketTotal number of packets received but discarded. Packets may be discarded
if they are received too far out of order to be reordered.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.7 |
aePwe3BunInterval15ReorderPacketTotal number of packets received and reordered. If packets are received out
of order, an attempt is made to reorder. Reordering packets does
not result in an error on the T1. However, this could be used as an
indication that there is congestion within the network.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.8 |
aePwe3BunInterval15JumpedPacketTotal number of packets jumped. A jump occurs when there is a gap in the sequence
numbers. As such, lost = jumped - reordered. If packets are not arriving out of
order, then the lost = jumped. This is an indication that packet(s) are dropping
somewhere within the network.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.9 |
aePwe3BunInterval15MalformedSecThe number of seconds a packet length mismatch has been detected. The packet
size must be the same at each end of the pseudowire. This is an indication
of a configuration problem.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.10 |
aePwe3BunInterval15TxRbitSecThe number of seconds packets have been transmitted with the R-bit asserted.
The R-bit is asserted in the transmit packets when a bundle stops receiving
packets. This could indicate that the other end of the pseudowire is not
configured.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.11 |
aePwe3BunInterval15TxLbitSecThe number of seconds packets have been transmitted with the L-bit asserted.
The L-bit is asserted in the transmit packets when there is a local T1 LOS
condition.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.12 |
aePwe3BunInterval15RxRbitSecThe number of seconds packets have been received with the R-bit asserted.
This is an indication that the other end of the pseudowire is not receiving
packets.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.13 |
aePwe3BunInterval15RxLbitSecThe number of seconds packets have been received with the L-bit asserted.
This is an indication that there is a far-end T1 LOS condition.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.14 |
aePwe3BunInterval15JitterBufferUnderrunThe number of jitter buffer underruns that have been detected. The jitter buffer
has emptied (packet reception is too slow). This could be an indication that the
jitter buffer is not configured big enough to accommodate the network packet
delay variation.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.15 |
aePwe3BunInterval15JitterBufferOverrunThe number of jitter buffer overruns that have been detected. The jitter buffer
is full and there is no room for addition packets. This could be an indication
of a timing problem (T1 timing at each end of the pseudowire is not synchronous).ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.16 |
aePwe3BunInterval15ESThe number of errored seconds.
See current15 table description.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.17 |
aePwe3BunInterval15UASThe number of unavailable seconds.
See current15 table description.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.18 |
aePwe3BunInterval15ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.2.1.19 |
aePwe3BunCurrent24TableThe bundle table contains statistics for the pseudowire connection (i.e. bundle). SEQUENCE OF AePwe3BunCurrent24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.3 |
aePwe3BunCurrent24Entry AePwe3BunCurrent24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.3.1 |
aePwe3BunCurrent24PortThe T1 port instance associated with this bundle.ro AePwe3T1Instance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.1 |
aePwe3BunCurrent24BundleThe bundle instance (identifier) associated with this pseudowire.ro AePwe3BundleInstance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.2 |
aePwe3BunCurrent24RxPacketTotal number of packets received. Under normal conditions, the received
and transmitted counts will increment at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.3 |
aePwe3BunCurrent24TxPacketTotal number of packets transmitted. Under normal conditions, the received
and transmitted counts will increment at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.4 |
aePwe3BunCurrent24LostPacketTotal number of packets lost. These are packets that were never received as
determined by gaps in the packet sequence numbers.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.5 |
aePwe3BunCurrent24DiscardPacketTotal number of packets received but discarded. Packets may be discarded
if they are received too far out of order to be reordered.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.6 |
aePwe3BunCurrent24ReorderPacketTotal number of packets received and reordered. If packets are received out
of order, an attempt is made to reorder. Reordering packets does
not result in an error on the T1. However, this could be used as an
indication that there is congestion within the network.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.7 |
aePwe3BunCurrent24JumpedPacketTotal number of packets jumped. A jump occurs when there is a gap in the sequence
numbers. As such, lost = jumped - reordered. If packets are not arriving out of
order, then the lost = jumped. This is an indication that packet(s) are dropping
somewhere within the network.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.8 |
aePwe3BunCurrent24MalformedSecThe number of seconds a packet length mismatch has been detected. The packet
size must be the same at each end of the pseudowire. This is an indication
of a configuration problem.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.9 |
aePwe3BunCurrent24TxRbitSecThe number of seconds packets have been transmitted with the R-bit asserted.
The R-bit is asserted in the transmit packets when a bundle stops receiving
packets. This could indicate that the other end of the pseudowire is not
configured.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.10 |
aePwe3BunCurrent24TxLbitSecThe number of seconds packets have been transmitted with the L-bit asserted.
The L-bit is asserted in the transmit packets when there is a local T1 LOS
condition.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.11 |
aePwe3BunCurrent24RxRbitSecThe number of seconds packets have been received with the R-bit asserted.
This is an indication that the other end of the pseudowire is not receiving
packets.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.12 |
aePwe3BunCurrent24RxLbitSecThe number of seconds packets have been received with the L-bit asserted.
This is an indication that there is a far-end T1 LOS condition.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.13 |
aePwe3BunCurrent24JitterBufferUnderrunThe number of jitter buffer underruns that have been detected. The jitter buffer
has emptied (packet reception is too slow). This could be an indication that the
jitter buffer is not configured big enough to accommodate the network packet
delay variation.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.14 |
aePwe3BunCurrent24JitterBufferOverrunThe number of jitter buffer overruns that have been detected. The jitter buffer
is full and there is no room for addition packets. This could be an indication
of a timing problem (T1 timing at each end of the pseudowire is not synchronous).ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.15 |
aePwe3BunCurrent24ESThe number of errored seconds.
See current15 table description.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.16 |
aePwe3BunCurrent24UASThe number of unavailable seconds.
See current15 table description.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.17 |
aePwe3BunCurrent24ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.18 |
aePwe3BunCurrent24ThresholdCrossingPointerIndicates the index of the threshold crossing entry.
Threshold crossings are not implemented.rw AeThresholdCrossingPointer (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.3.1.19 |
aePwe3BunInterval24TableThe bundle table contains statistics for the pseudowire connection (i.e. bundle). SEQUENCE OF AePwe3BunInterval24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.4 |
aePwe3BunInterval24Entry AePwe3BunInterval24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.4.1 |
aePwe3BunInterval24PortThe T1 port instance associated with this bundle.ro AePwe3T1Instance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.1 |
aePwe3BunInterval24BundleThe bundle instance (identifier) associated with this pseudowire.ro AePwe3BundleInstance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.2 |
aePwe3BunInterval24IntervalThere is 1 24-hour interval (yesterday).ro INTEGER .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.3 |
aePwe3BunInterval24RxPacketTotal number of packets received. Under normal conditions, the received
and transmitted counts will increment at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.4 |
aePwe3BunInterval24TxPacketTotal number of packets transmitted. Under normal conditions, the received
and transmitted counts will increment at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.5 |
aePwe3BunInterval24LostPacketTotal number of packets lost. These are packets that were never received as
determined by gaps in the packet sequence numbers.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.6 |
aePwe3BunInterval24DiscardPacketTotal number of packets received but discarded. Packets may be discarded
if they are received too far out of order to be reordered.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.7 |
aePwe3BunInterval24ReorderPacketTotal number of packets received and reordered. If packets are received out
of order, an attempt is made to reorder. Reordering packets does
not result in an error on the T1. However, this could be used as an
indication that there is congestion within the network.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.8 |
aePwe3BunInterval24JumpedPacketTotal number of packets jumped. A jump occurs when there is a gap in the sequence
numbers. As such, lost = jumped - reordered. If packets are not arriving out of
order, then the lost = jumped. This is an indication that packet(s) are dropping
somewhere within the network.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.9 |
aePwe3BunInterval24MalformedSecThe number of seconds a packet length mismatch has been detected. The packet
size must be the same at each end of the pseudowire. This is an indication
of a configuration problem.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.10 |
aePwe3BunInterval24TxRbitSecThe number of seconds packets have been transmitted with the R-bit asserted.
The R-bit is asserted in the transmit packets when a bundle stops receiving
packets. This could indicate that the other end of the pseudowire is not
configured.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.11 |
aePwe3BunInterval24TxLbitSecThe number of seconds packets have been transmitted with the L-bit asserted.
The L-bit is asserted in the transmit packets when there is a local T1 LOS
condition.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.12 |
aePwe3BunInterval24RxRbitSecThe number of seconds packets have been received with the R-bit asserted.
This is an indication that the other end of the pseudowire is not receiving
packets.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.13 |
aePwe3BunInterval24RxLbitSecThe number of seconds packets have been received with the L-bit asserted.
This is an indication that there is a far-end T1 LOS condition.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.14 |
aePwe3BunInterval24JitterBufferUnderrunThe number of jitter buffer underruns that have been detected. The jitter buffer
has emptied (packet reception is too slow). This could be an indication that the
jitter buffer is not configured big enough to accommodate the network packet
delay variation.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.15 |
aePwe3BunInterval24JitterBufferOverrunThe number of jitter buffer overruns that have been detected. The jitter buffer
is full and there is no room for addition packets. This could be an indication
of a timing problem (T1 timing at each end of the pseudowire is not synchronous).ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.16 |
aePwe3BunInterval24ESThe number of errored seconds.
See current15 table description.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.17 |
aePwe3BunInterval24UASThe number of unavailable seconds.
See current15 table description.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.18 |
aePwe3BunInterval24ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.4.1.19 |
aePwe3T1Current15TableThe PWE3 T1 table contains statistics for the T1 TDM interface. SEQUENCE OF AePwe3T1Current15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.5 |
aePwe3T1Current15Entry AePwe3T1Current15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.5.1 |
aePwe3T1Current15PortThe T1 port instance.ro AePwe3T1Instance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.5.1.1 |
aePwe3T1Current15LCVThe number of line code violations.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.5.1.2 |
aePwe3T1Current15ESThe number of errored seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.5.1.3 |
aePwe3T1Current15SESThe number of severely errored seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.5.1.4 |
aePwe3T1Current15UASThe number of unavailable seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.5.1.5 |
aePwe3T1Current15CSSThe number of controlled slip seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.5.1.6 |
aePwe3T1Current15ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.5.1.7 |
aePwe3T1Current15ThresholdCrossingPointerIndicates the index of the threshold crossing entry.
Threshold crossings are not implemented.rw AeThresholdCrossingPointer (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.5.1.8 |
aePwe3T1Interval15TableThe PWE3 T1 table contains statistics for the specified interval
and T1 TDM interface. SEQUENCE OF AePwe3T1Interval15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.6 |
aePwe3T1Interval15Entry AePwe3T1Interval15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.6.1 |
aePwe3T1Interval15PortThe T1 port instance.ro AePwe3T1Instance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.6.1.1 |
aePwe3T1Interval15IntervalThere are 32 15-minute T1 PM buckets.ro INTEGER .1.3.6.1.4.1.6321.1.2.5.5.2.6.1.2 |
aePwe3T1Interval15LCVThe number of line code violations.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.6.1.3 |
aePwe3T1Interval15ESThe number of errored seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.6.1.4 |
aePwe3T1Interval15SESThe number of severely errored seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.6.1.5 |
aePwe3T1Interval15UASThe number of unavailable seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.6.1.6 |
aePwe3T1Interval15CSSThe number of controlled slip seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.6.1.7 |
aePwe3T1Interval15ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.6.1.8 |
aePwe3T1Current24TableThe PWE3 T1 table contains statistics for the T1 TDM interface. SEQUENCE OF AePwe3T1Current24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.7 |
aePwe3T1Current24Entry AePwe3T1Current24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.7.1 |
aePwe3T1Current24PortThe T1 port instance.ro AePwe3T1Instance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.7.1.1 |
aePwe3T1Current24LCVThe number of line code violations.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.7.1.2 |
aePwe3T1Current24ESThe number of errored seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.7.1.3 |
aePwe3T1Current24SESThe number of severely errored seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.7.1.4 |
aePwe3T1Current24UASThe number of unavailable seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.7.1.5 |
aePwe3T1Current24CSSThe number of controlled slip seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.7.1.6 |
aePwe3T1Current24ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.7.1.7 |
aePwe3T1Current24ThresholdCrossingPointerIndicates the index of the threshold crossing entry.
Threshold crossings are not implemented.rw AeThresholdCrossingPointer (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.7.1.8 |
aePwe3T1Interval24TableThe PWE3 T1 table contains statistics for the specified interval
and T1 TDM interface. SEQUENCE OF AePwe3T1Interval24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.8 |
aePwe3T1Interval24Entry AePwe3T1Interval24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.8.1 |
aePwe3T1Interval24PortThe T1 port instance.ro AePwe3T1Instance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.8.1.1 |
aePwe3T1Interval24IntervalThere is 1 24-hour interval (yesterday).ro INTEGER .1.3.6.1.4.1.6321.1.2.5.5.2.8.1.2 |
aePwe3T1Interval24LCVThe number of line code violations.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.8.1.3 |
aePwe3T1Interval24ESThe number of errored seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.8.1.4 |
aePwe3T1Interval24SESThe number of severely errored seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.8.1.5 |
aePwe3T1Interval24UASThe number of unavailable seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.8.1.6 |
aePwe3T1Interval24CSSThe number of controlled slip seconds.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.8.1.7 |
aePwe3T1Interval24ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.8.1.8 |
aePwe3AggCurrent15TableThe aggregate bundle table contains statistics for the aggregate (i.e. Ethernet) PWE3 interface. SEQUENCE OF AePwe3AggCurrent15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.9 |
aePwe3AggCurrent15Entry AePwe3AggCurrent15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.9.1 |
aePwe3AggCurrent15InstanceIndex for the aggregate PWE3 interface.ro AePwe3AggInstance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.9.1.1 |
aePwe3AggCurrent15RxPacketTotal number of packets received. Under normal conditions, the received
and transmitted counts will be incrementing at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.9.1.2 |
aePwe3AggCurrent15RxByteTotal number of bytes received.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.9.1.3 |
aePwe3AggCurrent15TxPacketTotal number of packets transmitted. Under normal conditions, the received
and transmitted counts will be incrementing at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.9.1.4 |
aePwe3AggCurrent15TxByteTotal number of bytes transmitted.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.9.1.5 |
aePwe3AggCurrent15ClassifiedPacketTotal number of received packets that have passed classification. Packet
classification is performed on each packet received to determine if the packet
is truly intended for this interface. If the packet passes classification, it
is passed through to the intended T1 interface.
Under normal conditions, the received packet count and the classified packet
count will be incrementing at the same rate. If the received packet count is
increasing faster than the classified packet count, this is an indication that
stray packets are being received by the interface.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.9.1.6 |
aePwe3AggCurrent15ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.9.1.7 |
aePwe3AggCurrent15ThresholdCrossingPointerIndicates the index of the threshold crossing entry.
Threshold crossings are not implemented.rw AeThresholdCrossingPointer (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.9.1.8 |
aePwe3AggInterval15TableThe aggregate bundle table contains statistics for the specified interval
and aggregate (i.e. Ethernet) PWE3 interface. SEQUENCE OF AePwe3AggInterval15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.10 |
aePwe3AggInterval15Entry AePwe3AggInterval15Entry .1.3.6.1.4.1.6321.1.2.5.5.2.10.1 |
aePwe3AggInterval15InstanceIndex for the aggregate PWE3 interface.ro AePwe3AggInstance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.10.1.1 |
aePwe3AggInterval15IntervalThere are 32 15-minute bucket intervals.ro INTEGER .1.3.6.1.4.1.6321.1.2.5.5.2.10.1.2 |
aePwe3AggInterval15RxPacketTotal number of packets received. Under normal conditions, the received
and transmitted counts will be incrementing at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.10.1.3 |
aePwe3AggInterval15RxByteTotal number of bytes received.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.10.1.4 |
aePwe3AggInterval15TxPacketTotal number of packets transmitted. Under normal conditions, the received
and transmitted counts will be incrementing at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.10.1.5 |
aePwe3AggInterval15TxByteTotal number of bytes transmitted.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.10.1.6 |
aePwe3AggInterval15ClassifiedPacketTotal number of received packets that have passed classification. Packet
classification is performed on each packet received to determine if the packet
is truly intended for this interface. If the packet passes classification, it
is passed through to the intended T1 interface.
Under normal conditions, the received packet count and the classified packet
count will be incrementing at the same rate. If the received packet count is
increasing faster than the classified packet count, this is an indication that
stray packets are being received by the interface.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.10.1.7 |
aePwe3AggInterval15ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.10.1.8 |
aePwe3AggCurrent24TableThe aggregate bundle table contains statistics for the aggregate (i.e. Ethernet) PWE3 interface. SEQUENCE OF AePwe3AggCurrent24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.11 |
aePwe3AggCurrent24Entry AePwe3AggCurrent24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.11.1 |
aePwe3AggCurrent24InstanceIndex for the aggregate PWE3 interface.ro AePwe3AggInstance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.11.1.1 |
aePwe3AggCurrent24RxPacketTotal number of packets received. Under normal conditions, the received
and transmitted counts will be incrementing at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.11.1.2 |
aePwe3AggCurrent24RxByteTotal number of bytes received.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.11.1.3 |
aePwe3AggCurrent24TxPacketTotal number of packets transmitted. Under normal conditions, the received
and transmitted counts will be incrementing at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.11.1.4 |
aePwe3AggCurrent24TxByteTotal number of bytes transmitted.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.11.1.5 |
aePwe3AggCurrent24ClassifiedPacketTotal number of received packets that have passed classification. Packet
classification is performed on each packet received to determine if the packet
is truly intended for this interface. If the packet passes classification, it
is passed through to the intended T1 interface.
Under normal conditions, the received packet count and the classified packet
count will be incrementing at the same rate. If the received packet count is
increasing faster than the classified packet count, this is an indication that
stray packets are being received by the interface.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.11.1.6 |
aePwe3AggCurrent24ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.11.1.7 |
aePwe3AggCurrent24ThresholdCrossingPointerIndicates the index of the threshold crossing entry.
Threshold crossings are not implemented.rw AeThresholdCrossingPointer (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.11.1.8 |
aePwe3AggInterval24TableThe aggregate bundle table contains statistics for the specified interval
and aggregate (i.e. Ethernet) PWE3 interface. SEQUENCE OF AePwe3AggInterval24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.12 |
aePwe3AggInterval24Entry AePwe3AggInterval24Entry .1.3.6.1.4.1.6321.1.2.5.5.2.12.1 |
aePwe3AggInterval24InstanceIndex for the aggregate PWE3 interface.ro AePwe3AggInstance (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.12.1.1 |
aePwe3AggInterval24IntervalThere are 2 24-hour interval (yesterday).ro INTEGER .1.3.6.1.4.1.6321.1.2.5.5.2.12.1.2 |
aePwe3AggInterval24RxPacketTotal number of packets received. Under normal conditions, the received
and transmitted counts will be incrementing at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.12.1.3 |
aePwe3AggInterval24RxByteTotal number of bytes received.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.12.1.4 |
aePwe3AggInterval24TxPacketTotal number of packets transmitted. Under normal conditions, the received
and transmitted counts will be incrementing at the same rate.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.12.1.5 |
aePwe3AggInterval24TxByteTotal number of bytes transmitted.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.12.1.6 |
aePwe3AggInterval24ClassifiedPacketTotal number of received packets that have passed classification. Packet
classification is performed on each packet received to determine if the packet
is truly intended for this interface. If the packet passes classification, it
is passed through to the intended T1 interface.
Under normal conditions, the received packet count and the classified packet
count will be incrementing at the same rate. If the received packet count is
increasing faster than the classified packet count, this is an indication that
stray packets are being received by the interface.ro Counter32 .1.3.6.1.4.1.6321.1.2.5.5.2.12.1.7 |
aePwe3AggInterval24ValidDataIndicates the validity of the data in the bucket.ro PerfInvalidFlag (AE-TC) .1.3.6.1.4.1.6321.1.2.5.5.2.12.1.8 |