ADSL-MIB
The ADSL-MIB provides commWorks-specific management objects for monitoring and configuring Asymmetric Digital Subscriber Line (ADSL) physical layer parameters, including line status, attenuation, signal-to-noise ratio, and data rates on commWorks DSL access multiplexers.
Imported Objects
Objects
25 total| Object Name |
|---|
usrAdslThe commWorks enterprise defined MIB objects for ADSL MODULE-IDENTITY .1.3.6.1.4.1.77.1.1.26 |
IMPORTSThe commWorks enterprise defined MIB objects for ADSL Unknown .1.3.6.1.4.1.77.1.1.26 |
usrAdslXmitPowerTransmit power of ADSL transceiver represented in dB.ro Integer32(-15..-3) .1.3.6.1.4.1.77.1.1.26.1 |
usrAdslRmtReqDwnConstStatusValue corresponds to the downstream constellation
requested.rw Integer32 .1.3.6.1.4.1.77.1.1.26.2 |
usrAdslActualDwnConstStatusValue corresponds to the actual downstream constellation
that was used, which may differ from the value requested.ro Integer32 .1.3.6.1.4.1.77.1.1.26.3 |
usrAdslRmtReqUpConstStatusValue corresponds to the upstream constellation requested.ro Integer32 .1.3.6.1.4.1.77.1.1.26.4 |
usrAdslActualUpConstStatusValue corresponds to the actual upstream constellation that
was used, which may differ from the value requested.ro Integer32 .1.3.6.1.4.1.77.1.1.26.5 |
usrAdslFwRelFirmware release number of the GTI supplied transceiver
software module.ro Integer32 .1.3.6.1.4.1.77.1.1.26.6 |
usrAdslStartletVersonValue is a number that corresponds to the version number of
the STARLET VLSI in the transceiver.ro Integer32 .1.3.6.1.4.1.77.1.1.26.7 |
usrAdslMeanSqErrorReceived signal to noise ratio.ro Enumeration .1.3.6.1.4.1.77.1.1.26.8 |
usrAdslEqualizationTBDro Integer32 -- Range values are TBD .1.3.6.1.4.1.77.1.1.26.9 |
usrAdslReceiverGainTotal receiver gain measured in dB.rw Integer32 -- Range values are TBD .1.3.6.1.4.1.77.1.1.26.10 |
usrAdslBytesErrCorrectedNumber of bytes corrected by Reed-Solomon error correction
algorithm in the STARLET.ro Integer32 .1.3.6.1.4.1.77.1.1.26.11 |
usrAdslBytesNotErrCorrectedNumber of bytes not corrected by Reed-Solomon error correction
algorithm in the STARLET.ro Integer32 .1.3.6.1.4.1.77.1.1.26.12 |
usrAdslOverflowCounterRunning counter for when usrAdslBytesErrorCorrected or
usrAdslBytesNotErrorCorrected overflowsro Counter32 .1.3.6.1.4.1.77.1.1.26.13 |
usrAdslOpStateDefines the high level operating state of the transceiver.
Used by the customer to determine whether the transceiver
is in idle mode, data mode, test mode, or startup.ro Integer32 .1.3.6.1.4.1.77.1.1.26.14 |
usrAdslStartupProgressDefines the current detailed startup state of the
transceiver. The LSB determines the major mode
corresponding to startup in var usrAdslOpState.ro Integer32 .1.3.6.1.4.1.77.1.1.26.15 |
usrAdslLastFailedStatusDefines the last detailed state reached in
usrAdslStartupProgress before startup failed.ro Integer32 .1.3.6.1.4.1.77.1.1.26.16 |
usrAdslActualBaudDataRateDwnActual downstream rate of kilobytes per second.ro Integer32 .1.3.6.1.4.1.77.1.1.26.17 |
usrAdslActualBaudDataRateDwnMarTBDro Integer32 -- Range values are TBD .1.3.6.1.4.1.77.1.1.26.18 |
usrAdslActualBaudDataRateUpActual upstream rate of kilobytes per second.ro Integer32 .1.3.6.1.4.1.77.1.1.26.19 |
usrAdslActualBaudDataRateUpMargTBDro Integer32 -- Range values are TBD .1.3.6.1.4.1.77.1.1.26.20 |
usrAdslCFMStatusFlagThis variable controls saving and loading of configuration
information for the D56k WAN Driver. The value can be set
to either save or load by a management station. The other
values indicate if any configuration operation and what type
is in progress.rw UsrConfigStatus .1.3.6.1.4.1.77.1.1.26.21 |
usrAdslCfgFileNameThe name of a ConfigFile to read/write the D56k parameters.
If the value of this object is an empty string, then the
D56k Driver uses the default name `@file://D56k.cfg'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.77.1.1.26.22 |
usrAdslResetStatusThe Reset Status of the ADSL Starlet chipsetrw Integer32 .1.3.6.1.4.1.77.1.1.26.23 |
More MIBs from Lanmanager
Browse all LanmanagerMIBs →The USR-USER-MAN-MIB facilitates the monitoring and management of user authentication sessions, active login states, and access control policies on commWorks (US Robotics) network infrastructure devices. This module enables administrators to track real-time user connectivity metrics and enforce security configurations via SNMP.
The Cip-MIB provides enterprise-specific SNMP objects for monitoring and managing commWorks CIP (Common Industrial Protocol) devices, enabling the tracking of industrial automation session states, communication errors, and device operational parameters.
The USR-VHA-MIB provides SNMP management access for commWorks VHA (Virtual Host Appliance) devices, enabling monitoring of virtualization-specific metrics such as session states, resource utilization, and interface statistics. This module facilitates the tracking of virtual host availability and performance parameters critical for maintaining the operational integrity of commWorks virtual infrastructure.
The USR-FA-MIB provides management objects for monitoring Wireless Foreign Agent session states, tunnel configurations, and mobility parameters on CommWorks enterprise wireless infrastructure. This module enables the tracking of mobile node registration, handover events, and Foreign Agent resource utilization within a Mobile IP environment.
Standard SNMP MIB module defining data structures for UsrUserMan-MIB.
The ROBOEXEC-RESOURCES-MIB defines commWorks enterprise-specific objects for monitoring system resource utilization and operational status of RoboExec appliances. This module provides granular visibility into device health metrics, including CPU load, memory consumption, and process states, enabling administrators to track performance thresholds and resource exhaustion on RoboExec hardware.